Incorrect confirmation need to be reprocess.

Hello,
We have a problem today, In CO16N, I get the following message on a confirmation information (Confirmations have been entered at operation level for order 10001586).Can you please explain what this means, because Iu2019ve never had this message before? Can this confirmation be deleted without any consequences? Or is there be some modification needed somewhere else?
Thanks

Dear,
This meassge come if you have already confirmed the order at operation level (COR6N ) and next time you are trying to confirm at header level.You can check this in operation overview tab for all operations with status or you can check it in CORT.
please check and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 27, 2009 1:29 PM

Similar Messages

Issue in Reprocessing Incorrect Confirmations

Hi Folks,
I have a issue were i work on CO16N to reprocess incorrect confirmations i have a list of 40 production orders , and i choose to process in batch of 5 and execute , i get system dump since the transaction times out and dump error . When my co worker tries to execute CO16N it executes with out getting timed out . To narrow down i logged with my Id in his sytem and tried, even then i failed , it timed out , so nothing to do with syetem issue . When my friend logged in my system and executed it did execute , very confusing . Has anybody come across this kind of issue , if so pls help..
Points will be rewarded.

Hi Pearls,
It seem some authorization objects are not assigned to your used ID.
Please consult with your BASIS consultant. You can compare the Roles/Profiles of your ID and your friend ID.
Thanks and regards
Murugesan

HT203175 I tried to update my Itunes to the news version and now it will not open it says it was installed incorrectly I need to know what to do so I don't lose all my music

I tried to update my Itunes to the news version and now it will not open it says it was installed incorrectly I need to know what to do so I don't lose all my music

try with this one
uninstall all the apple application S/w like Quicktime, Bonjour,
apple Device Support, Apple Auto update, Itunes etc from your pc,
Reboot it
Now download a fresh itunes from apple and try installing
Reboot it
If you are having Problem in uninstalling any of the apple application
try 'revo uninstaller' and uninstall all the apple applications
mentioned above

RU255 : No incorrect confirmations were founds

Dear Experts,
When a user log him on the system, the information message "RU255 No incorrect confirmations were founds" appear automatically, before to become on the SAP Menu.
I've found the transactions CN30 (project) or IW36 (maintenance&services) which have the same effect (Sales -> Product cost by sales order -> Actual posting -> time sheet -> Transfer -> Post processing confirmations)
Can someone explain me the reason of the apparition of this message at this time and how can I prevent it without a desactivation with transaction SE91?
Thanks a lot for your assistance.
herieric

Hello Mr Lakshmipathi,
Thanks for your answer.
We are actually working on version ECC6.0. This note is dated from 2002 and is not precisely relevant with my problem.
I've also see the note 370387 (2001 but more relevant), but the problem isn't solved yet.
If you have an another idea... thanks in advance.
Regards.
herieric

IW46 (Reprocessing incorrect confirmations) : edit parameters

Hi,
When running IW46 , the result screen shows data for all the plants.
I would like to have a way to sort data for a specific plant : on the result screen , in the menu path : 'Edit/Parameters' is not active , is there a configuration to be done to activate that?
Thanks,
Pete

No standard solution...

SOAP to JMS using Sync/Async bridge - configuration confirmation needed

Hi group,
Since I'm experincing error in a scenario using sync/async bridge in jms adapter I really would like a confirmation on my configuration.
For a simple SOAP to JMS scenario is it then correct that all I need is;
1) 2 synchronous message interfaces, 1 inbound and 1 outbound
2) 1 Receiver determination
3) 1 Interface determination
4) 1 Receiver agreement (JMS adapter with module configuration)
5) 2 Sender agreements (in my case 1 soap and 1 JMS adapter - the later with module configuration).
6) The sender and receiver JMS adapters point to different MQ queues (request and response queues)
7) The sender agreement for the JMS adapter uses my synchronous, inbound message interface (isn't this really just a "dummy" to actually fetch data from response queue - meaning that the actual utilized business system/service, MI and namespace are unimportant, since the module will make the adapter notify the listening module in the receiver JMS adapter?)
Best Regards,
Daniel

Hi, thanks for your reply.
I'm familiar with the links provided. I believe everything is configured as it should be, but since I get error I would like to have my configuration confirmed. Neither the weblog (or SAP guide) are detailed enough to convince me 100% that my configuration is correct. Surely the problem could be on the MQ side, but before going into that, I want to be sure that its not on XI-side.
So I really would like confirmation on the steps/question that I wrote:-)
Best Regards,
Daniel

Incorrect PO; need to cancel material doc, invoice

Hello All,
We have created a PO with an incorrect price, but the goods receipt against this PO was done (MIGO) and an invoice was created with MIRO, all with the price on the incorrect PO.
Which steps do we have to follow? we want to correct the price in the PO. We can do this with transaction ME22N, but we will also have to cancel the invoice and with MR8M and cancel the material doc. with MBST. Does this reflect on FI as well? or do we have to take other steps to ensure the FI document is corrected as well?
Thank you, regards
Daniel

Dear daniel,
Yes you also need to cancel the FI doc / Clearing doc, i think when you cancel the MIRO, the system warn you to manually clear the doc in FI side.
Regards,
w1n

Images Need to Be Reprocessed on Launch

Whenever I launch Aperture 3 a notice appears just below the histogram on the adjustments pane saying that the image shown in the Viewer was processed in an earlier version of Aperture and needs to be processed again, although all of my library has been reprocessed. Same thing happens most of the time if I shift to a different project as to the first image (or two) selected. I always click the "Reprocess Now" button but the same think keeps happening. The 3.1 update did not change this. Has anyone else encountered this?

This has now become an emergency! I downloaded the Camera Raw update this afternoon as my camera was one of those covered. The message about images needing reprocessing because they were processed under an earlier version of Aperture appears with nearly every image now and when I click "Reprocess" the system responds very slowly if at all--sometimes it just crashes. When I click on the album to reprocess all of it the bar graph never makes it all the way across before the crash occurs. I reopened to repair permissions and repair the data base but nothing has helped. Can anyone help?

Billing address is incorrect! Need to change billing address!!

My billing address is incorrect for my credit card. Cannot purchase any product until it is changed.

contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html

Snow Leopard Installation Confirmation Needed...

This may seem like an odd question, but here goes anyway...
I've been experiencing kernel panics for quite some time running 10.6.8 on a C2D 2.16GHz iMac. So today I installed Snow Leopard from a retail package DVD.
I didn't stick around to watch the entire installation process; I was sitting at another desk working on my MacBook Pro. But eventually the iMac spit-out the DVD and restarted. The problem? When I checked "About This Mac" it indicated that I was running 10.6.8; the retail DVD is not 10.6.8. As far as I can tell from the box it is 10.6, which makes sense because I purchased it right after SL was introduced.
I had downloaded the 10.6.8 Combo Updater expecting to run it after the iMac restarted into 10.6. The installer package was sitting on the Desktop.
When I checked the iMac drive I found a "Mac OS X Install Data" folder that wasn't there before the installation. It mainly has what appear to be installer packages for printer drivers and various Apple software as well as a few data files. But I don't see an installation log. I also could not find an old System Folder in the Trash.
So was a new System actually installed? Did the installer somehow update 10.6 to 10.6.8? Or did the installation fail for some reason without an error message? How can I confirm a successful installation of Snow Leopard?

I had the same problem as you, by the sounds of it. When I installed Snow Leopard Server on a mini, it went through the motions of configuring the attached Airport base station NAT settings to support the services I had turned on. Unfortunately, that configuration either didn't stick, or the Airport lost the settings in the restart. Here's where I posted a question about this experience: http://discussions.apple.com/thread.jspa?messageID=10318987&#10318987
Like you, I've been redirected to that "well know" list on several occasions, but it doesn't quite answer the question we both seem to have which is: +If Snow Leopard Server had successfully configured the NAT port settings on my Airport router, what would that configuration look like?+ Or, put in other terms: +What are just the ports I need to open on my Airport router to adequately support my installation of Snow Leopard Server?+
Of course, it all depends on what services you have enabled, so it would be helpful if the list could be broken down by service type.
Yes, the sure would save wading through that massive "well know" ports list to find just the few you need to manually configure the Airport...

RAM Question Confirmation Need

hi mates,
need confirmation about 939 mobo when is filled all 4 DIMM Slots Memory will be dropped to 333. What mean that? Etc Devider will be locked to the max 166? System will be running with 166 DRAM Freqency?

Thanks for the info. will see what will happend the is a chance to handle 4 sticks with 1T, will let you know when i have mobo and CPU. memory sticks will be 1GB XP4000 MUSHKIN Dual Pack(2x512) (2-2-2-x) 3.3V-3.5V default and Corsair XMS C2 Dual Pack (2x256) PC3500(modded SPD). etc 1.5GB total. currently using them to Socket A, they have nice coordination at work together Corsair can handle Mushking timmings and also love over 3.3V like Mushking(http://valid.x86-secret.com/show_oc?id=100253). Mobo will be K8N Diamond Plus due his feature to push DIMM Vcore to 4.1V.
DFI Xpert can make it. anyway will test it.
http://img519.imageshack.us/my.php?image=4gb1t2hours9mc.jpg

My ichat has been blocked because my user name or password is incorrect , plz need help to unblock ?

Please help me unblock my ichat

Hi,
Could you tell us the iChat version and whether this is an AIM Login ?
If it is an AIM Login can you also specify whether it is AIM, @mac.com, @me.com from Mobileme days or @me.com from an iCloud registration.
If AIM with one of the Apple IDs listed then the password needs to be 16 characters or less.
Apple prompt you to have longer (more secure) but the AIM servers can only cope with/up to the 16
For @mac.com and older @me.com use iForgot to change the password or do a Web Browser login to iCloud and change your password there.
The message you have is typical of AIM
It tends to be the password they are talking about because if the name is wrong it cannot even check further and will tell you the name does not exist. (the message is different).
10:41 PM Saturday; January 7, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Current FireWire 800 drivers limitation - confirmation needed

I just got a Seagate GoFlex Desk of 3TB USB3.0 ; I connected the device using an USB2.0 (happy the standard is still backward compatible) to see if the device is functioning.
Try it on the FireWire 800 adapter and I unhappily had to contact the Seagate support. They respond as follow :
I understand that you're having an issue getting the 3 TB Go Flex Desk to mount.
The reason for the Mac OS not recognizing the drive is because the Mac OS currently does not have the firewire 800 drivers that support drives that are over the 2 TB limit. This is unfortunately one of the limitations of the Mac operating system. At this time, Mac is currently working to develop firewire 800 drivers that support the larger hard drive size, but no information has been released by Apple, that we know of, as to when a driver update would become available.
Could I get confirmation as I couldn't find any knowledge base on that issue? I may have not used the proper keyword...
Thank you very much.

FA GoFlex Desk :
Capacité : 3 To (3 000 592 977 920 octets)
Support amovible : Oui
Disque amovible : Oui
Nom BSD : disk1
Identifiant du produit : 0x50a1
Identifiant du fournisseur : 0x0bc2
Version : 1.00
Vitesse : Jusqu’à 480 Mb/s
Fabricant : Seagate
Identifiant de l’emplacement : 0xfd100000
Courant disponible (mA) : 500
Courant requis (mA) : 0
Type de carte de partition : APM (Carte de partition Apple)
État S.M.A.R.T. : Non géré
Volumes :
Capacité : 262 Ko (262 144 octets)
Inscriptible : Non
Nom BSD : disk1s1
Aperture :
Capacité : 3 To (3 000 458 477 568 octets)
Disponible : 2,67 To (2 673 969 479 680 octets)
Inscriptible : Oui
Système de fichiers : HFS+ journalisé
Nom BSD : disk1s3
Point de montage : /Volumes/GoFlex
And to confirm, the USB does work without trouble.
Message was edited by: LMA1980

SQLPlus path is incorrect and need to reset

When I select Tools -> Database -> SQL*Plus I get an error message stating Windows cannot find 'C:oracle\product\10.2.0\clinet_1\bin\sqlplus.exe'
which is correct the location is C:\oracle\11gR202Client64bit\bin\sqlplus.exe. But I can't find any place to enter the correct path in Jdeveloper 11g r 2 and remove the old location which is no longer available after the upgrade. I really need this fixed as well as how to set the path for jdk as well which is not working either. Thanks for your time. Michael

You can select the path for sql/plus under tools->preferences->Database->sql*Plus
Timo

TS1559 Having problems logging into my email despite my wifi is working. Only able to access my mail from my desktop and not from my iPad, iPod. Error message is my username or password is incorrect. Need assistance to resolve this problem

Cannot get my emails despite logging in with my correct username and password

Hello, Valeriemitchell.
Thank you for the question. Since you are able to access your email account on other device, this issue could be related to a security feature offered by your email host. Without knowing which email host you use, I will include the best resources that I can. Below, I have included two e-mail troubleshooting articles. The first article covers basic email troubleshooting. The second article will assist you if the email account you are experiencing issues with is a Gmail account.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
iOS: Gmail account will not connect to Gmail server
http://support.apple.com/kb/TS3058
Hope this helps,
Jason H.

Incorrect confirmation need to be reprocess.

Similar Messages

Maybe you are looking for