Incorrect Cost in the Cost Run - Recursive Indicator in the BOM.
Dear All,
We have an issue with few materials where in the Cost run cost is incorrect.On Further analysis we got to know that this is because the recursive flags set for in the costing BOMs caused the incorrect cost.I just want to know if any one of you have encountered this type of issue and how you fixed this issue.Please let me know.
Thanks,
dbk
Hi,
Please check if the following correction notes have been installed:
- 1487255
- 1448124
- 1437988
- 1428408
Best regards,
Antje
Similar Messages
-
Job skipped: An execution in the current run or one of the previous runs wa
What does it means this error when jobs fail and how can be avoided? That is really boring..
Skipped Reason: An execution in the current run or one of the previous runs was suspended by the system.
Thanks
RosarioIt means exactly what it says. One of the previous runs of this job is in a Suspended status. Look at all the past executions until you find a Suspended run, then either resume or stop it.
-
Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?
See these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.
Once you get familiar with the Mac, see:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information. -
i have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer
Try this:
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors -
Privilege command: the show run does not show the running-config
Hi,
Whenever I login using "user1" I can successfully authenticate however when I ussue the show run for user1. The only thing that I can see are the following:
R4#show run
Building configuration...
Current configuration : 13 bytes
end
R4#
I have put the command on the router as follows:
~~~~~~~~~~~~~~~~~~~~~
aaa new-model
aaa authentication login ACS group tacacs+ local
aaa authentication login NO-AUTH none
aaa authorization exec ACS group tacacs+ local
aaa authorization exec NO-AUTH none
aaa authorization commands 1 ACS-1 group tacacs+ local
aaa authorization commands 1 NO-AUTH none
aaa authorization commands 10 ACS-10 group tacacs+ local
aaa authorization commands 10 NO-AUTH none
aaa authorization commands 15 ACS-15 group tacacs+ local
aaa authorization commands 15 NO-AUTH none
username user2 privilege 15 password xxx
username user1 privilege 10 password xxx
tacacs-server host 10.50.31.6
tacacs-server directed-request
tacacs-server key xxx
privilege exec level 15 show
privilege exec level 10 show running-config
line con 0
exec-timeout 1000 0
authorization commands 1 NO-AUTH
authorization commands 10 NO-AUTH
authorization commands 15 NO-AUTH
authorization exec NO-AUTH
login authentication NO-AUTH
line aux 0
authorization commands 1 NO-AUTH
authorization commands 10 NO-AUTH
authorization commands 15 NO-AUTH
authorization exec NO-AUTH
login authentication NO-AUTH
line vty 0 4
authorization commands 1 ACS-1
authorization commands 10 ACS-10
authorization commands 15 ACS-15
authorization exec ACS
login authentication ACS
end
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Regards,
LorenzLorenz
I believe that the answer is that in implementing privilege levels Cisco designed the show run command so that if you do not have capability to change something that it will not show up in the show run. I believe the logic is that from a security standpoint if you are not authorized to change it you should not be able to see it in the config. So in your case if user1 is not able to change anything then they will not be able to see anything in show run.
HTH
Rick -
I am having problem with my games application... no idea where is the problem. non of the game run smoothly 1st in 1st its hard to open the apps in it open than also it will close automatically. Please help me out
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
If necessary...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
How do I create installer that checks the available Run Time Engine on the target system
Hi,
I am looking for a soultion on custom Installer where this Installer once done with the Installation should be capable of checking the presence of Runtime Engine on the target system. I amaware of including/checking the LV RTE checkbox for such options and we are working on some other concept. The thing is we would like to give the user a pop-up or any message that shows the presence of Runtime engine on the target system after finishing the installation. In case the runtime engine is not already installed on the target system, this time the message will be for the link to get the .exe and close the installation.
Overall we would like to minimize the size of our Installer that in case will get increased if we include Run Time Engine along with the Installer.
I am also assuming that such checking can be done through Advanced Tab in the Installer properties by including any such .exe for performing those things but looking for more options if possible to get it done.
Please do let me know if someone has any idea about it.
Thnaks in Advance,
VivekHi teststand,
you can start another program which checks if the rte is available. It should also be possible with only a batch file.
Mike -
Can I set the "step run mode" -property with the property loader
Is it possible to set the "step run mode"-property by using the property loader to "Skip" , "Normal" or "Force PASS" ...in TestStand 3.0 ?
I turned on Station Options>>Preferences>>Show Hidden Properties and then exported the Step.TS.Mode property to a limits file. I then added a PropertyLoader step and it functioned correctly.
Note that importing a hidden TS subproperty makes an edit to the sequence file, even if done at runtime. Thus if you later save the file, you might end up inadvertently saving the last imported values. This isn't necessarily a problem if the values in the file are always overwritten by a property loader step.
(btw, I tested this in 4.0, but I'm hopeful it would also work in 3.0) -
HT4356 how are the Airprint-compatible printers indicated in the list?
in the list on Apple's website, there is a long list, but no indicator for Airprint compatable,printers. Or can I use any wifi printer?
All of the printers on the list are AirPrint compatible printers.
-
How do I reset the visual voice mail indicator on the app?
I have no vmail in my box, but the icon on my Motorola Droid Turbo shows 1 message. Is there a way to force a re-synch or reset the vmail counter?
Clearing cache and app data both did not fix the problem. A power reset did. Thanks!
-
Note 533276 - Setting the batch management requirement indicator
Hi;
we have found an oss note for setting the batch management requirement
indicator.. but the program mentioned in oss note does't exist in the
attachement part.. we urgently need your help..
how can we find program RVBCONVMAT2BM?
Note 533276 - Setting the batch management requirement indicator
Solution
Here, the standard procedure is to clear stocks of the current and the previous period as well as to complete the open documents. Note 30656 provides further information about this.
Alternatively, in the case of a large data or document volume, you can use a conversion report from the batch development that sets the batch management requirement indicator without the necessity of manual preliminary works such as the posting of the stocks or the completion of open documents.
We have developed the main features of this report, but it must be adjusted to individual business processes in a customer project that is subject to charges.
If you require further information about functions of this tool or about running such a customer project, you can send an e-mail to the consulting department ([email protected]).Hi,
You also need to check for open sales order, open production orders, open WM transfer orders and open deliveries. These documents needs to be closed/completed.
Check OSS notes 533276 - Setting the batch management requirement indicator.
Following is the details of this notes;
Summary
Symptom
The attempt to set the batch management requirement indicator for a
material in the material master record maintenance fails because there are
stocks or documents that are not completed such as production orders, sales
orders, deliveries or WM transfer orders.
More Terms
MARA-XCHPF, MARC-XCHPF, RVBCONVMAT2BM
Cause and Prerequisites
Solution
Here, the standard procedure is to clear stocks of the current and the
previous period as well as to complete the open documents. Note 30656
provides further information about this.
Alternatively, in the case of a large data or document volume, you can use
a conversion report from the batch development that sets the batch
management requirement indicator without the necessity of manual
preliminary works such as the posting of the stocks or the completion of
open documents.
We have developed the main features of this report, but it must be adjusted
to individual business processes in a customer project that is subject to
charges.
If you require further information about functions of this tool or about
running such a customer project, you can send an e-mail to the consulting
department (BMToolsatsap.com).
Regards, -
in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.
Hi Bruce and fruhulda,
ok, I found the keyboard viewer, it only shows the traditional symbol 'return'. something like a sideway u-turn continued with the arrow under. This is the Canadian or US keyboard.
btw thanks for your suggestion. -
My Powerbook will not power up, but I can hear the fan running...
Please help!! My Powerbook will not power up, but I can hear the fan running when I press the power button to attempt to power it up. I just received a new power adapter because it wasn't working properly and it was doing this before and then it worked for a week and now it will not power up at all. It just starts the fan but nothing else turns on. When I plug the adapter, with the battery still connected, it will look as if it is charging but then the light on the plug turns from green to orange then off and doesn't power up at all. If I take the battery out and plug in the adapter, the light stays on but it does not power up except for the fan noise. Does anyone have any suggestions? I also followed the two articles listed online in regards to resetting the power setting and the command + alt + P + R as well. Nothing works. Thanks in advance.....
Same here. If I start up with the power adapter attached, it starts up fine. If I try to start up from battery only, the fan comes on, the sleep light comes on but nothing else happens. I tried letting it sit that way for about 15 minutes and nothing changed. I tried attaching the power cord while in this mode and nothing changed. I tried the PMU reset a couple of times but nothing helps.
This computer is just over 1 year old and I have not had any problems with the power cord (3rd party), the battery, or any problem like this before. It started after a proper shutdown last night and attempt to start without the power cord this afternoon.
Any answers to this yet? I think I'll call on this and report any success to this discussion.
15" PowerBook G4 Mac OS X (10.4.8) 1 GB DDR2 SDRAM, 100 GB HD -
How to track the Posting run number for a TRIP?
Hi
I have one my users who has settled & posted the trip. But she does not know the Posting run number. Is there any way / SAP Standard report with which we can track the Posting Run number in whcih the specific trip has been included and posted to Finance?
RegardsHi,
We can see the trip number on tcode PR05 & PRRW for specifed personnel number.
Check PTRV_DOC_HD Transfer Travel -> FI/CO: Header of TRV int. document
PTRV_HEAD General Trip Data
PTRV_PERIO Period Data of a Trip & revert back.
Regards,
Pramitha. -
The build directory of the test run either does not exist or access permission is required.
i am trying to run automated tests
i follow the steps in the web but when i have 2 issues that does not solve
1. i created console project and add build definition without drop folder and queue builds that success.
2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
5. when i try to associate the builds for the test plan i have a PROBLEM(1):
this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
and than when i try to run the automated tests i have this PROBLEM(2):
The build directory of the test run either does not exist or access permission is required. and the test failed.
Please Help
RoeyHi Rory,
Thank you for posting in MSDN forum.
According to the error message:
(1) a pop up shown with error : " The build that you selected for this plan no longer exist "
I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
with yours like the following screen shot.
However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
I know that the error message occur in either of the following conditions:
1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.)
2. The build directory itself does not exist.
So please refer the following blog to check this issue:
http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
My powerbook G4, which I bought three months ago, has worked very well until the last two weeks. First, I think it had a bizarre overheating problem which caused it to randomly fall asleep, only to be woken by removing and then replacing the battery
-
How to change a formula response of Y to "Yes"?
My 1st formula is if {FOCUS_VIEW.PT_AGREE_TO_PARTICIPATE} = 'Y' then 1 I would like it to show up in the report as Yes instead of 1 The 2nd formula is if not isnull ({FOCUS_VIEW.CALL_1_DATE_OF_CALL}) then 1 I would like it to show up in the report
-
Flash player 17 Mac OS Yosemite will not download
Flash player only downloads to 25% Lightroom only downloads to 40% I have uninstalled, demounted, re downloaded the Diskmount and tried all troubleshooting suggestions in the forums Help me please
-
Disabling gridlines when saved to excel from WEBI
when a report is saved to excel format from WEBI(Business Objects 6.5). Is it possbile to disable the gridlines in excel ? I
-
before i get started, i would like to say, that MSI used to be my favorite vender... but with the latest experiences i've had... that has changed... I know i will probably be banned from the site again, and my user account disabled once more... but i