Incorrect data value selected when clicking on slicer entry in Excel Services

We have uploaded various Excel 2013 files containing pivot tables to Sharepoint 2013 and viewed the pivot tables in a browser. The referenced pivot table data is normally a SSAS tabular model. This has been working fine for over 12 months apart
from one irritating feature.
Sometimes a clicked slicer entry does not result in the correct slicer value being selected. This typically occurs after using the mouse scroll button to scroll down a list of entries in a slicer. When using the keyboard arrow keys to highlight a slicer
value and pressing Return to select an entry, the correct value does always seem to be selected - so it appears to point to a mouse scrollwheel issue. Also, after scrolling through slicer entries using the mouse scroll wheel, there appears to be some sort
of slicer refresh problem that results in a blank entry/entries being displayed either at the top or bottom of a slicer. However, sometimes the correct 'tooltip' is shown for this blank slicer entry. One other point - when using the slicer scrollbar the scroll
down a list of slicer entries using Firefox, the problem does not seem to occur. IE does not seem to display the same type of slicer scrollbars (only active when the mouse hovers over the slicer) and so this is more difficult to replicate in Ie.
The worrying factor is that the user is often unaware that the incorrect slicer value has been selected. The problem can be replicated in both IE11 and Firefox. Also our client systems accessed via Citrix display the same problems.
Any help greatly appreciated. Thanks.
Graham Goodwin Email: [email protected]

Hi Graham,
i built the same version, please correct me if should your environment, is sharepoint 2013 with march 2013 update and your office also the same update. in my labbox seems the issue is not re-producible.
after some discussion with my colleague, seems there was issue similar like this back in 2010 Excel and the remedy is to update the excel services and to re-install the power pivot at SQL server. back then the issue is because when we scroll the selection,
it should be locked, so then when we scroll it may have the position to update and refresh the data. one of the workaround is by clicking the item and press enter, by doing this it will refresh the page correctly. the link was:http://www.microsoft.com/en-us/download/details.aspx?id=29074
i tried to look at our update for the excel services 2013, there are updates in every cumulative updates but there is no particlular update regarding this issue, perhaps you may try this to check in your development environment, if should it may fix the
issue.
to re-install the power pivot, you may need to do this on your sql side.　
http://technet.microsoft.com/en-us/library/ee210708.aspx
http://technet.microsoft.com/en-us/library/ee210671.aspxi may suggest you to check the ULS log, if should there are issues with powerpivot also, to make sure if should there are no issue
regarding power pivot. if there is no issues on the powerpivot, then you may need to open a ticket to report this issue, so that we can have a detailed checking to your environment remotely.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

How to make it selected when clicked and open popup

Hi,
I 've a form in the parent page with many form elements.
I've 2 radio buttons with values "Yes" and "No". I am opening a modal popup when clicked on "Yes" radio button. The modal popup is opening fine.
But when I click "Yes", it' s not selected. After modal popup is closed, when I return to parent page, the option "Yes" is still not selected.
How to make it selected when clicked and open popup?

Perhaps try moving the application to your preferred desktop and then right-click it's dock icon > options > Assign to This Desktop.

Registered with incorrect date of birth when first turn iPad on

Hi please help, I registered with the incorrect date of birth when first turned on the iPad, and now when I try to register to set up a iPad account the systems keeps saying can't register as date of birth does not meet age requirement even though putting in the correct dob. Please advise how can I change the original set up dob details. Thanks

Read this for the instructions.
http://www.ehow.com/how_8493711_change-birth-date-itunes.html

Variable displaying incorrect data for selection in template

Hello Friends,
We have an InfoObject 0CALMONTH. On this InfoObject we have created a variable PERIOD (Z_INTER). This InfoObject and variable is used in two queries (A & B). In BEx the variable is working fine for both the queries, that means the variable shows the correct period (04/2005 to 01/2007). This data exists in our dataprovider.
Now in a web template, I pull a chart and associate query A as the dataprovider and the variable works fine. It also does so if I associate query B as the dataprovider. The problem starts when I pull two charts, simultaneously in the template, and associate one with query A and other with query B. This time the variable acts funny and shows and incorrect period for selection (03/1995 to 03/2005). We do not have any data for the year 1995 to 2004 in the dataprovider.
So you see individually the queries (and variable) run fine but as soon as I ask them to co-exist in the same template, I get aberrations. We are not sure from where this previous years data is being pulled.
Please assist. Thanks!
Regards,
Prem.

Hi,
I feel 1995 year data should be available in any one of the cube. Check the complete data in the cube directly with 'manage' tab or 'listcube' transaction code.
And one more idea in my mind is, remove the variables from the queries and use 'filter' option in WAD for filtering the caleder month.
Try this also: Use only one variable for both reports. I mean to say, remove variable in one report. Check whether both reports also running fine.
Once you try this, let me know the status. According that we will try more things.
Regards,
Vivek V

Incorrect Website being displayed when CLICKING from Search engine

When CLICKING on a Website address from using a search engine, or entering it directly, the WRONG address is displayed.
It DOES have the correct address, but the DISPLAY is not the one I am looking for. Same if using the IE rendering Facility, same results if using AdBlock OFF.
Only if using IE Directly as the Browser, is the CORRECT Website displayed.
A friend of mine has NO problems in doing the same,
for the same Website address, with FF.
As far as I know, other Websites are not affected !
(Well, none that I have used so far )

Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Do not get full page when click on bookmarked entry

when click on bookmarked item - only get part of a page not full page? Why? how do I get the full page from clicking on a bookmark?
using firefox 4 on win 7 - 64bit
last (old) firefox worked fine!!!

How are you saving a new bookmark?
There 5 ways to save a new Bookmark in Firefox, the first 4 should offer to save the new bookmark in a folder:
1.
2. Right-click and select Bookmark this Page.
3. Bookmarks > Bookmark this Page
4. Double-click the Star that is on the right side of the Location bar.
4a. (A single-click on the Star will save the new Bookmark to the Unsorted Bookmarks folder, without opening the Edit this Bookmark dialog.)
5. Drag the website image in the URL bar into the Sidebar view of Bookmarks
or to the Bookmarks menu bar item and then into the drop-down or onto the Bookmarks Toolbar

Incorrect data value when insert into oracle table

Would like to ask expert here, how could I insert data into oracle table where the value is 03 ? The case is like that, the column was defined as varchar2(50) data type, and I have a csv file where the value is 03 but when load into oracle table the value become 3 instead of 03.

user11432758 wrote:
Would like to ask expert here, how could I insert data into oracle table where the value is 03 ? The case is like that, the column was defined as varchar2(50) data type, and I have a csv file where the value is 03 but when load into oracle table the value become 3 instead of 03.
implicit datatype conversion to NUMBER can result in leading zero to be eliminated.
How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002

Databound Combobox - First item changes to previous selection when clicked again

Hi All,
I have just written my first vb.net app using VS2014 and everything is working perfectly except the same weird issue is happening on 2 comboboxs I have...
Basically I have a Vehicles combobox and a Departments combobox (both created by dragging the field from Data Sources after setting it to combobox onto the form creating a databinding). When the user has made their selection they hit a show operations button
which then does things depending on the selections made.
The tables come from a SQL Server.
The sql statement for my Departments TableAdapter is:
SELECT Code, Department
FROM Departments
ORDER BY DisplayOrder
Setup of combobox:
Use Data Bound Items is ticked
Data Source = DepartmentsBindingSource
Display Member = Department
Value Member = Code
Selected Value = (none)
This image show a correct list for the department CB (bored of typing combobox) when it is first clicked.
I select Finishing, then.
This image shows what I get on the second click (which can literally be straight after as though the wrong selection was made the first time - I say this as clicking my Show Operations button has no effect on the behaviour).
Basically the top item changes to be whatever the previous selection was. If I had chosen Construction it would have read Construction, Construction, Finishing.
The same thing is happening on the Vehicles CB - I wont explain that as it is the same as above.
I have been googling this for several hours but cannot find any other example of this issue. I may have done something stupid but hopefully not.
If you could please shed some light on why these combobox's are behaving this way I would be VERY grateful.
I am trying to learn as much as I can so if someone could actually explain why this is doing this rather than just a one line fix (which would be better than no fix at all) it would be appreciated.
Note: I have no code associated with event / index changes on either box in any way. I reference their current values once I have click my Show Operations button.
Anyway I hope the above is nice and clear for you.
Thanks again,
Paul.

Thank you for shairng your experience here.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to display data in ComboBox when click on DataGrid Row.

Hi!
     I am new to Adobe Flex. I am building one Project that was related to Comapny and Customer. First I created Company Master. Then I create Customer Master successfully and My Backkend is SQLite Database.
     My Problem is I have two files one is CustomerMaster and second one is CustomerForm.
     In CustomerMaster I have a datagrid in that data was displaying thru Array Collection. When ever we doublick on datagrid row it's displayed a CompanyForm. CompanyForm contains TextFiled and ComboBox. TextFiled populating data but Combobox doesnot. It display always prompt message.
      Please help.
Thanks,
Sree Kumar

Hi! Vibhuti Gosavi,
                      First of all thanks for your quick reply. Already I saw that link.
Actually, In CustomerForm successfully store the information into the database. While retrieving the data problem cames. Sample Code:
CustomerMaster:
private function createItem():void
                                        openTab(new Object());
                              public function openTab(customer:Object):void
                                        var children:Array = tn.getChildren();
                                        var length:int = children.length;
                                        for (var i:int = 0; i<length; i++)
                                                  if (children[i].customer.customerId == customer.customerId)
                                                            tn.selectedIndex = i;
                                                            return;
                                        var form:CustomerForm = new CustomerForm();
                                        tn.addChild(form);
                                        form.customer = customer;
                                        form.dao = dao;
                                        form.addEventListener(CustomerEvent.CREATE, customerChangeHandler),
                                                  form.addEventListener(CustomerEvent.UPDATE, customerChangeHandler),
                                                  form.addEventListener(CustomerEvent.DELETE, customerChangeHandler),
                                                  tn.selectedChild = form;
                              private function customerChangeHandler(event:CustomerEvent):void
                                        customerArrayList = dao.findByCustomerAll();
                                        if (event.type == CustomerEvent.DELETE)
                                                  tn.removeChild(event.target as CustomerForm);
                    ]]>
          </fx:Script>
          <mx:Canvas id="container" left="12" right="12" top="12" bottom="12">
                    <mx:Canvas left="0" top="2" right="0" height="33">
                              <mx:Button id="AddCustomer" x="1" width="108" height="32" click="createItem()"
                                                     icon="@Embed('assets/icon_plus.png')" label="Add Customer" toolTip="Add Customer"
                                                     verticalCenter="-1"/>
                    </mx:Canvas>
                    <code:SuperTabNavigator id="tn" x="0" y="39" width="681" height="197"/>
                    <mx:DataGrid id="customerList" x="1" y="262" width="680" height="231"
                                                   dataProvider="{customerArrayList}"
                                                   doubleClick="openTab(customerList.selectedItem)" doubleClickEnabled="true">
                              <mx:columns>
                                        <mx:DataGridColumn dataField="customerId" headerText="Id"/>
                                        <mx:DataGridColumn dataField="customerName" headerText="Name" />
                                        <mx:DataGridColumn dataField="companyName" headerText="companyName" />
                              </mx:columns>
                    </mx:DataGrid>
          </mx:Canvas>
CustomerForm:
public function set customer(customer:Object):void
                                        this._customer = customer;
                              public function get customer():Object
                                        return this._customer;
                              private function saveCustomer():void
                                        if (Validator.validateAll(customerValidators).length>0)
                                                  return;
                                        _customer.customerName = customerName.text;
                                         _customer.companyName = companyName.text;
                                        if (_customer.customerId > 0)
                                                  updateCustomer();
                                        else
                                                  insertCustomer();
                              private function insertCustomer():void
                                        try
                                                  Alert.show(_customer.normalPkts);
                                                  dao.insertCustomer(_customer);
                                                  customerId.text = _customer.customerId;
                                                  dispatchEvent(new CustomerEvent(CustomerEvent.CREATE, _customer, true));
                                                  var alertText:String="Company Created Successfully!";
                                                  Alert.show(alertText,"",4,null,null,ConfirmMessage);
                                        catch (error:SQLError)
                                                  var alertErrorCreate:String="Company not Created...";
                                                  Alert.show(alertErrorCreate+"\n"+error.details,"",4,null,null,ErrorMessage);
                              private function updateCustomer():void
                                        try
                                                  dao.updateCustomer(_customer);
                                                  dispatchEvent(new CustomerEvent(CustomerEvent.UPDATE, _customer, true));
                                                  var alertText:String="Company Updated Successfully!";
                                                  Alert.show(alertText,"",4,null,null,ConfirmMessage);
                                        catch (error:SQLError)
                                                  var alertErrorText:String="Company not Updated...";
                                                  Alert.show(alertErrorText+"\n"+error.details,"",4,null,null,ErrorMessage);
                              private function deleteItem():void
                                        try
                                                  dao.deleteCustomer(_customer);
                                                  dispatchEvent(new CustomerEvent(CustomerEvent.DELETE, _customer, true));
                                        catch (error:SQLError)
                                                  Alert.show(error.details, "Error");
                    ]]>
          </mx:Script>
   <mx:Grid x="10" y="10" width="665" height="130" verticalAlign="middle">
                    <mx:GridRow width="665" height="100%">
                              <mx:GridItem width="85" height="100%">
                                        <mx:Label width="85" text="Customer Id:"/>
                              </mx:GridItem>
                              <mx:GridItem width="115" height="100%">
                                        <mx:TextInput id="customerId" text="{_customer.customerId}" editable="false" width="115"/>
                              </mx:GridItem>
                              <mx:GridItem width="102" height="100%">
                                        <mx:Label width="102" text="Company Name:"/>
                              </mx:GridItem>
                              <mx:GridItem width="100" height="100%">
                                        <mx:ComboBox id="companyName" dataProvider="{companyIdList}" labelField="companyName"
                                                                       prompt="Select..." text="{_customer.companyName}" width="100"/>
                              </mx:GridItem>
                      <mx:GridItem width="230" height="100%" horizontalAlign="center" verticalAlign="middle">
                                        <mx:Button label="Save" click="saveCustomer()"/>
                                        <mx:Button label="Delete" click="deleteItem()"/>
                              </mx:GridItem>
                    </mx:GridRow>
          </mx:Grid>
=====================================================================
I have two ArrayCollections 1) companyIdList (CustomerForm)
                                          2) customerArrayList(CustomerMaster)
please go through the bold text. Please focus on two dataProviders. These dataproviders are binding for One Combo Field.
Thanks,
Sree Kumar
Message was edited by: sreekumar1976

Getting 'No Data found' Error when clicking the edit link to edit a record.

Application Express 4.2.0
Database: oracle 11g
Hi Guys
I am getting an error whenever i try to edit some of my entries by clicking the edit link, i have a composite Primary key attributes of three columns ( Budget Year ('YYYY'), Training Name('VARCHAR') and Emp Code ('VARCHAR')
Some records will load when i click Edit but some wont and return 'ORA-01403: no data found' error.
Any help will be appriciated.
Thanx
MATT

Hi,
Please create example about problem to apex.oracle.com and share developer login details to workspace.
Regards,
Jari

Frame Duration not selectable when clicking on show info for jepgs & stills

I have imported still images into imovie HD6 and cannot select the duration any clip. I have tried both, pressing apple+i and double-clicking the image.
The only thing that works is the manual slider control in the timeline section. The problem is I'm importing several hundred still clips and don't want the standard (default) of 5 seconds, but rather, 0:00:8 of a second. I was hoping to be more exact than just dragging the slider down. Not to mention manually changing each clip is going to take quite a long time.
Also, I was wondering if there was a way to "select all clips" and then change the duration of all clips at the same time? (so far I've been able to select all and that's about it)
any help would be appreciated
thanks,
-TJ
Intel 2Ghz Core Duo Mac OS X (10.4.6)
Intel 2Ghz Core Duo Mac OS X (10.4.6)

Thanks for the info. It has not completely solved my problem, but I have gotten farther. By importing the images from iphoto instead of a straight drag 'n drop from my desktop, I have now been able set the duration of my frames when importing. I am also able to change each clips duration individually once I double click on a frame in the timeline window.
Here's my dilemma:
I may be able to control the duration of each picture I import, however I can only choose the numbers I can set using the slider. Meaning, if I go in and punch in the numbers manually, even if its within the minimum 00:03, I still get an error that states "I have not set a time within the minimum parameters." You may wonder why I can't set the slider to what I want and that is because my slider control under "photo settings" skips from 0:03 to 0:18 or sometimes 0:15 or 1:10, 1:18, and so on....
clarification:
(i'm talking about as I slide the slider back and forth. It doesn't move up and down the numeric scale evenly. Once I set it on a number, it doesn't skip.
I mean it skips between numbers with no means to refine the number you really want to try—I hope I didnt' confuse further.)
A Little More Background:
I am importing 176 pictures as still clips from iphoto into imovie HD6. I don't know if the number of slides have something to do with it or not, I cannot seem find a definte answer to that. do you know?
Also, once imported from iphoto into imovie, it will not consistently behave the way I assume the program is made, when I try and set a new duration time. Meaning if I wanted to change all my photo stills from the chosen imported time of 00:03 to one of the next numbers on the slider (let's say it's 1:18), and I hit update, it sometimes changes it and sometimes doesn't. More times it does NOT. I have tried "select all" or "select similar" from the menu thinking that my selecting method may be the problem, but these actions don't seem to make a difference.
any ideas on what is wrong? is it a bug or is it something I'm not doing correctly.
btw: thanks for the note on the frame rates. I know I speak less intelligent in these areas. I appreciate the new knowledge.
Intel 2Ghz Core Duo Mac OS X (10.4.6)
Intel 2Ghz Core Duo Mac OS X (10.4.6)

Missing data in selects when using statistics

Hello,
I've got a really strange thing:
We have a small table (say 20 records) and are using schema statistics.
Now after inserting a row in this table, in de selects this row is NOT found!!
Found out that when updating the statistics this record is found!
So, could it be that using statistics (probably in a wrong way!) the results are changing?

Ed, was the query issued from the same session as the insert? Was the data committed?
On a post like this along with the edition and full Oracle version you should have posted the SQL that can duplciate the problem.
HTH -- Mark D Powell --

MS Project Pro file on Project Server 2010 does not accept [No Group] selection when clicking on Group view

MS Project Server 2010 gives me the following error when I try to click on the [No Group] group:
Error message:
The group "" cannot be found. You tried to display a view that references a group that is not available.
Specify a different group for the view."
Note: When I look at the drop downlist for the Group on the View Ribbon, [No Group] appears in the Built-in section of the list. It also appears on the Organizer.

Michael W --
I have seen this error message several times when the project got corrupted due to drops in my network connection while the enterprise project was open. If memory serves me correctly, the method for resolving this problem is to use the Save For
Sharing feature. To do this, complete the following steps:
Add the Save for Sharing button to your Quick Access Toolbar, if you have not already done so previously. Use the Project Options dialog for this.
Open the project in question and click the Save for Sharing button.
In the Save for Sharing dialog, save the MPP file in a location where you can find it easily, such as your Desktop.
Close the MPP file and then reopen it.
Click File > Save As and then click the Save button.
Using this process, Microsoft Project will resolve the corruption in your project. Please let us know if this process works for you.
Dale A. Howard [MVP]

[Flex 4.5.1] How to prevent Radio Button from being selected when clicked on? No Changing Event?

I have a very common use case where you have a few radio buttons and only one can be selected at a time. Some of them are basic and on click should be selected right away, but other are more complex and open a pop up which requires some additional user selections after which the user selected OK or CANCEL for example and only after that the selection of the radio button should be applied programatically.
So to solve this issue I've come up with 2 workarounds:
1) make the entire group, that holds the radio button, act as a button with buttonMode="true" mouseChildren="false" and programatically change the radio button within it.
2) hold the current radio button selection in a variable and in the changeHandler of that radio button return the selection back to what was selected before. But this also causes a small flickering of the radio button which gets selected and deselected immediately after that.. not cool.
So my question is... is there something I am missing that could do the job without these workarounds... like a Changing event which I use for the ButtonBar but I can't find on the RadioButton or RadioButtonGroup... thanks!

Hi,thanks for the reply. Actually that was my third option, but not sure if it's very good also..
Here is a simple scenario:
User must select between 2 radio buttons:
1) no volume -> sets variable volume=0 and selects the radio button (that is the normal use case)
2) set volume -> opens up a pop up with a list that has a X button to close and 4 options: 25% volume, 50% volume, 75%, 100%
At this point the set volume radio button should not be selected and the user has 2 choices:
-> hit the X button to close - nothing changes and no volume radio button is still selected and volume is still = 0
-> hit one of the volume % buttons -> the set volume radio button gets selected and the variable volume=25/50/75/100 depending on the button selected by the user.
That's a pretty common scenario and it's bugging me that I can't easily alter the radio button selection logic since whenever I click it, it gets selected and I can't put a logic in between in a standard way. This should apply to any component with selection, just like ButtonBar has it with the Changing event.
So is there any other more convenient way to accomplish this scenario that you could recommend?
Thanks!

When Exporting a Crystal Report to Excel format all of the dates get changed when viewed on Mac version of Excel

We're using Crystal Reports 10 and when we export a report from the Crystal Viewer using either the MS Excel 97-2000 option or the MS Excel 97-2000 (Data Only) option, the date columns on the report appear as expected on a PC version of Excel, however, most of the users at our company use Macs so when they open the same report on the Mac version of Excel all of the dates show up as 2011 or 2012 dates eventhough they are suppose to be 2008 dates. We've tried to just open the report after the export process and then do a "Save As" but get the same result. The date columns all appear to be formatted as Date. The dates on the Crystal Viewer appear as expected when viewed on a Mac. The users are running Excel for Mac OS-X Service Release 1.0. Any idea why this may be happening and is there a solution to this problem? Thanks!

Hi,
To clarify, are you currently using the Mac version of Crystal Reports Viewer 2008 which you downloaded from here?: http://www.sap.com/solutions/sapbusinessobjects/sme/reporting/viewer/index.epx

Incorrect data value selected when clicking on slicer entry in Excel Services

Similar Messages

Maybe you are looking for