Incorrect data with Virtual Cube 0FIGL_V10 when used in MultiProvider

Hi All,
I am using 0FIGL_V10 in a multiprovider with 0FIGL_O02 to solve a reporting requirment.
My problem is that I am unable to get the same revenue figure from the multiprovider as I am from the virtual cube alone.
In the multiprovider query I have filtered my revenue KYF's by:
value type
version
currency type
I have fiscal period across the top of the columns and filtered for example to 001.2009 - 006.2009
This query returns double the revenue value that I get if I run an indentical query on the base cube 0FIGL_V10.
I have found that if i filter fiscal period directly in the KYF restriction it outputs the correct result which is confusing.
Any ideas ?
help much appreciated.
Mark

Hi ..
Thanks for the suggestion but this note has already been implemented into our system.
Any other thoughts ?
thanks and regards
Mark

Similar Messages

Use of virtual cube 0FIGL_V10 for reporting on Financal Statements

Dear all,
I am new to the GL reporting and I have a question about the usage of the virtual cube for reporting on Financial Statements.
On the content site I see that you can report your Balance Sheet based on the infocube 0FIGL_C10, where you can use the infoobject 0GLACCOUNT to display the balances.
I also installed the Virtual Cube 0FIGL_V10, which has the infoobject 0GLACCEXT to show the Financial Statement Item hierarchy.
My questions are:
- to create a Balance Sheet Report, is it advisable to use the content query 0FIGL_C10_Q001?
If I run that query now, it is showing the data on seperate G/L accounts, where I would like to see a hierarchy display.
For reporting on the capital expenditure however the requirement is that some G/L acoounts don't have to be taken into account. How can I exclude those then from the hierarchy for that report?
- to create the P&L, advice on the content site is to use the virtual cube because you have the Financial Statement Item hierarchy available there and you can report on specific financial statements.
Can anyone tell me the added value of using the Virtual Cube? Or can I skip it and just add the Financial Statement Item hierarchy in the 0FIGL_C10 cube and create a report where I select the nodes of the hierarchy that are only applicable for the P&L? Will that corrupt the figures or have any other effect?
Thanks in advance for the help!

Hi Sundar,
As ravi said the VC can be used when we have leass number of users, basically in VC the structure will be available. And moreover when you generetae a report based on Multiprovider which is based on the VC then it will pick up the data directly from the source to which it has been connected..
Hope it helps..
***Assign Points***
Thanks,
Gattu

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

Can not find data in virtual cube

Experts,
I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
Can anybody tell me what could be the reasons the data is coming through Virtua cube.
Thanks,
AK

Hi,
i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
regards
Siggi

Still Having Problem with Battery Overheating with Car Dock/Charger when using Maps/Navigation

I'm having a problem with the battery overheating when using Google Navigation in the OEM Samsung car dock and car charger. On a trip last weekend, I started off with a fully charged battery (because posts on other sites have complained that the Charge cannot keep up with the power draw of the Google nav app while using the car charger). About an hour into my trip, I got a message that the battery was overheating and to unplug the charger which I did. I then had to contend with the screen going out because it was running on the battery. I let the phone discharge to about 70% then tried the car charger again. Within a few minutes, I got the same overheating message. It was not an overly hot day and the car A/C was set at 68 degrees.
This morning (with the battery at about 85%) I tried to use the Navigation without the car dock while charging and got the same results...the phone battery overheated and I had to unplug the charger. The battery temperature reached 116 degrees. (also, the battery level was also dropping while using the Maps or Nav application even though it was hooked up to the car charger).
I'm very disappointed with this situation since I was hoping I could replace my old Garmin GPS with the Charge. But between the phone dimming the screen while running on battery, and having a depleted battery in the phone at the end of the trip, its just not a viable option. I really like this phone, but I'm running against the "return" clock.
Any ideas?
Could this be a software problem that will be corrected by an update in the future?
fyi: other Charge problems in the last 5 days:
- dropping audio on calls to other Verizon phones.
- use of camera flash causing the phone to reboot.
(I do have the 'class 4' 32gb card in my Charge)
Thanks in advance,
Rich

Jerry:
Yes, the phone is charging while in the car dock. I confirmed it both under the "about phone-status-battery status" menu and by my battery widget. By watching the battery widget, I also noticed that the voltage steadily increased over the ride home. It started at about 3.90 volts and ended at 4.02 volts. I don't know if that is significant. This time the battery did not overheat. The Max temp was 110 degrees, but no notice to disconnect came up. This might be because the sun was behind me on the drive home rather than beating down on the dash like it was this weeked.
I've ordered a cheap universal dock from Amazon for about $15.00 which clips onto the a/c vent. I want to see if this keeps the temperature down. If this works, I can still return the fancy-schmantzy Samsung OEM car dock. (The car-dock interface wasn't that impressive anyway).
Please let me know if the volt change means anything.
And thanks again for your help!
Rich

Am using firefox 5 and am not able of uploading any file as attachmenet using my Yahoo email account , this problem does not happen with hotmail account or when using IE.

when sending email through yahoo account , i cant upload any attachment with email, a sign of uploading lasts forever without uploading the file.
this issue do not happen with hotmail account or when using IE to browse Yahoo account.

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Quicktime Player with the magic mouse, when used with a bug -

On 10.7 Lion, Quicktime Player with the magic mouse, when used with a bug …
Quicktime Player will not respond, but use the USB mouse with no problem

Message was edited by: b j t

Does Mackie Control work with Final Cut 7 when using USB MIDI?

I have a Mackie Control Universal Pro connected via USB to my mac and it works GREAT with Logic and all the complimentary Logic Studio software.
The problem I am having is, when I try to use it with Final Cut, it wont work at all. I have read the post concerning this that was answered by Andy Mees but, I dont use a true MIDI connection, only USB.
Any thoughts?

Does Mackie Control work with Final Cut 7 when using USB MIDI?
No one will know until FCP 7 is released.
-DH

Chars & kf's related to virtual cube not get updated via multiprovider

Hi Friends,
              I've got one multiprovder, which has got two infocubes, one is 0CFM_C10 & ZRATES, in these one is basic infocube and the other one is virtual cube. So i've built the query on multiprovder which gets data from two infocubes basic and virtual, but when i'm trying to restrict in the query, the chars & kf's which are related to virtual infocube are not getting data, but the chars related to basic infocube getting data.
               NOTE: i've checked virtual cube by choosing the "display data" option, here it is showing, bt via multiprovder it's getting updated, even i can't see the data for those chars in multiprovder also using "display data" option,
what would be the problem? why virutal cube data isn't getting updated?
any idea's
awaiting for your responce

Hi Siggi,
        Thanx for your replay, actually the chars & kf's related to virtualcube are not in basic cube know! and also the query requirement is to get data from two cubes, i think in that case, not required to restrict at infocube level using 0infoprovider,
             i can be able to see the data in virtual cube, but it's getting vir multiprovider, the assignment in multiprovider is right,
then what would be the problem?
Regards,
BalajiReddy

What is the use of Data packet dim with Virtual cube with services

Hi Friends,
Could anybody tell me what is the use of Packet dimension in Virtual cube with services , It cannot contain data persistently ,Just fetch at runtime,Then there is no Physical load happening,Then why it should be automatically created for this??
Message was edited by: Pradeep choudhari

Hi Maik,
Unit dimension will not be created automatically until and unless you have keyfigure referning units..
But my question is : Why should we have data pack dimension , which is useless in this case of Virtual cube with services.It should not be created automatically!! What do you say??

Query on Virtual cube 0FIGL_V10 show old "Last Data Updated:" on Portal

Hello all,
We are using the SAP delivered virtual cube for G/L financial statements reporting. We are running these queries on Portal (BI 7.0) we are using the 0ANALYSIS_PATTERN template. Now since we are not actually loading data in this cube the template show "Last Data updated" as long time back, I am guessing when the cube was last activated or transported.
The template and time stamp is working perfect for queries on all other cubes or Multiproviders.
The business users are asking can we have the actual time stamp there (when actually the data was last loaded),
Does anyone have any idea how we can do it without actually rewriting the queries on standard cube.
Thanks in advance,

Hi Kiran,
Always last update data status only will see in our reports on last data updated date. It may be activation of data in cube. please check is there any option of activate data in data flow level.
Try to create one record in remote data source and load it again. It may be find the latest status.
Thanks,
Chandra

No Data retrieved with AJAX Call HTMLDB_GET when using Safari Browser

In my apex (4.0) app i have certain page a which uses JS AJAX htmldb_get to pull some data from an on-demand process using xml structure
var get = new htmldb_Get(null, $v('pFlowId'),
'APPLICATION_PROCESS=get_markerdata', $v('pFlowStepId'));
if (!MEBMarkerdataXML) {// Tabelle mit Kunden leer? Dann aus DB abfragen
MEBMarkerdataXML = get.get('XML');
l_Count = MEBMarkerdataXML.getElementsByTagName("Kunde").length;
I ran into a strange behavior when using Safari Browser (Mac and Windows) when opening the page.
As long as the process retrieves less than 50 rows everything works fine. The data is pulled from the OnDemand Process and delivered to the browser; the XML Data can be selected in JS for further processing
<<<<<<<<<<<<<< HTTP Traffic taken from Safari <<<<<<<<<<<<<<<
Anfrage-URL:http://80.149.218.10:8080/apex/wwv_flow.show
Anfragemethode:POST
Status-Code:200 OK
Anfrage
Content-Type:application/x-www-form-urlencoded
Origin:http://80.149.218.10:8080
Referer:http://80.149.218.10:8080/apex/f?p=41107101:43:1599514482232751::
User-Agent:Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3
Formulardaten
p_request:APPLICATION_PROCESS=get_markerdata
p_instance:1599514482232751
p_flow_id:41107101
p_flow_step_id:43
Antwort
Cache-Control:no-cache
Content-Type:text/xml;charset=UTF-8
Date:Thu, 03 May 2012 10:19:35 GMT
Pragma:no-cache
Server:Apache-Coyote/1.1
Transfer-Encoding:Identity
X-DB-Content-length:53329
X-ORACLE-IGNORE:IGNORE, IGNORE, IGNORE, IGNORE
<<<<<<<<<<<<<<<<
When calling for more then 50 rows Safaris shows a POST Error -1001 and no Data is delivered.
This occurs only on some Mac's and my Dev WIN-XP PC using SF Browser; never on iPad/iPhone . Never when using FF on Mac or PC.
I googled a lot of different Sources, it seems to be a Timeout Problem when making a long runing AJAX Call. But i did not find any useful hint.
Any Ideas from the APEX & HTTP Gurus?
Regards
Peter

It's just that in my experience htmldb_Get.get() is troublesome for browsers, due to the fact it performs a synchronous request. The browser can do nothing else while it waits for the response. I've seen Firefox really struggle with it in the past couple years. Also, I've seen no good reason to use synchronous XMLHttpRequest calls. As you can see, it's simple to refactor a call to htmldb_Get.get() into a call to htmldb_Get.GetAsync().
For your case in particular, I was just guessing Safari have implemented a timeout to ensure that they don't end up waiting indefinitely for a request that never returns as this would be fatal. You're probably hitting that timeout.
I don't think htmldb_Get is officially documented anywhere, but you can find the source here... http://apex.oracle.com/i/javascript/uncompressed/apex_4_0.js
There is also a pure jQuery way to perform AJAX request, I recommend using this because at least it's documented. Here's a snippet of a typical APEX AJAX request done the jQuery way:
apex.jQuery.ajax({
dataType: "xml", //supports text, xml, json, jsonp, script, or html
type: "post",
url: "wwv_flow.show",
traditional: true,
data: {
    p_request: "APPLICATION_PROCESS=get_markerdata",
    p_flow_id: $("#pFlowId").val(),
    p_flow_step_id: $("#pFlowStepId").val(),
    p_instance: $("#pInstance").val()
success: function (data, textStatus, jqXHR) {
    // Do your thing in here
error: function (xhr, ajaxOptions, thrownError) {
    // Handle error in here
});Then you can refer to great documentation here... http://api.jquery.com/jQuery.ajax/

Problems with a Business Object when using data RAW.

Hi,
I've created a Z bapi with parameter tables as
FILE_BIN like SDOKCNTBIN
The structure SDOKCNTBIN has one RAW field.
When I go to SWO1 and implement a new Bapi, the following error occurs:
"Field SDOKCNTBIN -LINE is too large to be included in container"
Does anyone knows why when I declare an structure with a field RAW, gives that error?
Thanks in advance!

Does this occur when using Immediate Mode?
Here's a blurb from my ADF Toy Store paper about Batch Mode and immediate mode.
http://www.oracle.com/technology/products/jdev/collateral/papers/10g/adftoystore/readme.html#batchmode

Can't view my Cube and Dimension Data with the Cube Viewer

I'm new in using OWB, i'm using Oracle 10g release1 with OWB R2 also Oracle WorkFlow 2.6.3.
When studying with the steps from the OTN pages (start01, flat-file02, relational-wh-03, etl-mappings, deployingobjects, loading-warehouse and bi-modeling)
the loading was success, i guess...
But when I want to see the data in the cube and dimension, an error occurs.
It says
" CubeDV_OLAPSchemaConnectionException_ENT_06952??
CubeDV_OLAPSchemaConnectionException_ENT_06952??
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DataViewerConnection.connect(DataViewerConnection.java:115)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.BIBeansConnect(DimDataViewerMain.java:433)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.init(DimDataViewerMain.java:202)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:68)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100) "
Can somebody explain what is happening, I really don't understand, when the cube viewer window appears, there's no data in it....
I realy need help with this...

I'm new in using OWB, i'm using Oracle 10g release1 with OWB R2 also Oracle WorkFlow 2.6.3.
When studying with the steps from the OTN pages (start01, flat-file02, relational-wh-03, etl-mappings, deployingobjects, loading-warehouse and bi-modeling)
the loading was success, i guess...
But when I want to see the data in the cube and dimension, an error occurs.
It says
" CubeDV_OLAPSchemaConnectionException_ENT_06952??
CubeDV_OLAPSchemaConnectionException_ENT_06952??
at oracle.wh.ui.owbcommon.dataviewer.dimensional.DataViewerConnection.connect(DataViewerConnection.java:115)
at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.BIBeansConnect(DimDataViewerMain.java:433)
at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.init(DimDataViewerMain.java:202)
at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:68)
at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100) "
Can somebody explain what is happening, I really don't understand, when the cube viewer window appears, there's no data in it....
I realy need help with this...

Query on BCS virtual cube is not using the aggregates on BCS basic cube

Hi all,
I have BCS Virtual cube which is linked to BCS Basic cube. I built aggregates on BCS Basic cube.
I created simple query on BCS basic cube and ran in debug mode of rsrt, it showed the aggregates on bcs basic cube. But when I created the same query on BCS vitual cube and ran it rsrt debug mode the query did not show any aggregates, that was strange.
So My questions is whether query built on virtual bcs can utilize the aggregates built BCS basic cube, if possible please let me knows the tweaks.
Thanks,
Raj.

1. Goto se37. Enter RSDRI_INFOPROV_READ and choose Display.
2. In line 82 (in a BW 3.5) there is a line that says:
CLEAR: e_t_data, e_end_of_data, e_aggregate, e_split_occurred.
Put the cursor in there and press the 'stop shield' or use CtrlShiftF12.
3. In the same mode open transaction RSRT and choose your query. Execute it. If you stop at the breakpoint, enter I_TH_SFC into one of the fields in the lower left area and press Enter. You should see a table with the characteristics you need in the system.
As I said I'm not quite sure if it works. I have access to a BCS system on monday. I'll try then to find out more.
Best regards
Dirk

Incorrect data with Virtual Cube 0FIGL_V10 when used in MultiProvider

Similar Messages

Maybe you are looking for