Incorrect dates in Moments

I have recently synced quite a few photos, old and new, onto my iPad (iOS 7.1.2) using iTunes (11.3.0.54) on my Windows 7 machine and not all, but some photos are appearing in Moments under the wrong date.
After checking (and changing if needed) the Date Taken, Date Created, Date Modified and Date Accessed for the photos and the folder each group of photos are in, some are still appearing under the incorrect date.

photo_journ wrote:
Oh that's brilliant. Thanks very much. Worked like a charm.
Does that indicate any other underlying problem with the user account?
no. just some minor corruption in the preference file with the date settings. we deleted it and it was recreated from scratch with default values.
I just tried loading some CDs that were burnt on an older PowerBook Pro and the Macbook Pro wont read any of them -- all the same brand. Other brands it reads fine so I'm wondering if the dates might issue might indicate an underlying problem?
this is quite unrelated to the date issue. it could be a bad CD brand - can easily happen with some cheap ones. or there could be something wrong with the burner on the powerbook. can you read those CDs on other computers?
I left this open in case you have any more information you would like to add - even about the fix for the dates. Otherwise feel free to close it.
as the thread starter you are the only person one who can close this thread.
Thanks again. It was annoying.
John

Similar Messages

Incorrect data in ODS

Hi All,
we are loading data from one ODS to another with delta processes.The second ODS got some incorrect data Populated.After that I did a full repair load selectively for one record only from first ODS to another and it went fine.But when I am loading by full repair load the records for entire company code,one particular key figure is getting doubled for most of the records.I've checked there is no problem with the start routine.
Please let me know if I am missing anything in full repair load.
Thanks in advance.

Hi,
In sequence to this post,now i am getting a differnt and strange error.
the data gets loaded from ODS1(0FIA_DS11) to ODS2(0FIA_DS12).
But for some asset main nos the CACQ_VL_YR and TACQ_VL_YR does not get populated.
WE have a start routine in between.The start routine poplualtes the CACQ_VL_YR .TACQ_VL_YR is polulated with ACQ_VAL_TR.
the routine is as follows:
DATA: lt_trans LIKE table of DATA_PACKAGE,
         wa_trans LIKE LINE OF lt_trans.
LOOP AT DATA_PACKAGE.
    CLEAR wa_trans.
Nicht-Werfelder 1:1 übernehmen
    MOVE: DATA_PACKAGE-currency   TO wa_trans-currency ,
          DATA_PACKAGE-comp_code TO wa_trans-comp_code ,
          DATA_PACKAGE-/BIC/ZASS_MAIN TO wa_trans-/BIC/ZASS_MAIN ,
          DATA_PACKAGE-/BIC/Zdep_area TO wa_trans-/BIC/Zdep_area ,
          DATA_PACKAGE-fiscyear   TO wa_trans-fiscyear,
          DATA_PACKAGE-fiscvarnt TO wa_trans-fiscvarnt.
Wertfelder mit identischer Übertragungslogik bei PLN und ***
    MOVE:
    DATA_PACKAGE-vaw_odp_tr TO wa_trans-vaw_odp_tr,
    DATA_PACKAGE-vaw_sdp_tr TO wa_trans-vaw_sdp_tr,
    DATA_PACKAGE-vaw_udp_tr TO wa_trans-vaw_udp_tr,
    DATA_PACKAGE-vaw_avr_tr TO wa_trans-vaw_avr_tr,
    DATA_PACKAGE-va_rapc_tr TO wa_trans-va_rapc_tr,
    DATA_PACKAGE-va_rodp_tr TO wa_trans-va_rodp_tr,
    DATA_PACKAGE-va_invs_tr TO wa_trans-va_invs_tr.
    CASE DATA_PACKAGE-transtype.
      WHEN '***'.
    Wertfelder kumuliert
        MOVE:
        DATA_PACKAGE-acq_val_tr TO wa_trans-cacq_vl_yr,
        DATA_PACKAGE-inv_sup_tr TO wa_trans-cinv_gr_yr,
        DATA_PACKAGE-ord_dep_tr TO wa_trans-cor_dep_yr,
        DATA_PACKAGE-spc_dep_tr TO wa_trans-csp_dep_yr,
        DATA_PACKAGE-upl_dep_tr TO wa_trans-cup_dep_yr,
        DATA_PACKAGE-res_trf_tr TO wa_trans-cres_tr_yr,
        DATA_PACKAGE-interst_tr TO wa_trans-cinter_yr,
        DATA_PACKAGE-reval_tr   TO wa_trans-crev_rv_yr,
        DATA_PACKAGE-rev_odp_tr TO wa_trans-crev_od_yr.
        COLLECT wa_trans INTO lt_trans.
    Wertfelder geplant
      WHEN 'PLN'.
        MOVE:
        DATA_PACKAGE-acq_val_tr TO wa_trans-acq_val_tr,
        DATA_PACKAGE-inv_sup_tr TO wa_trans-inv_sup_tr,
        DATA_PACKAGE-ord_dep_tr TO wa_trans-plo_dep_yr,
        DATA_PACKAGE-spc_dep_tr TO wa_trans-pls_dep_yr,
        DATA_PACKAGE-upl_dep_tr TO wa_trans-upl_dep_yr,
        DATA_PACKAGE-res_trf_tr TO wa_trans-pln_avr_yr,
        DATA_PACKAGE-interst_tr TO wa_trans-pln_int_yr,
        DATA_PACKAGE-reval_tr   TO wa_trans-prev_rv_yr,
        DATA_PACKAGE-rev_odp_tr TO wa_trans-prev_aodyr.
        COLLECT wa_trans INTO lt_trans.
   'echte' Bewegungen ignorieren.
      WHEN OTHERS.
    ENDCASE.
ENDLOOP.
DATA_PACKAGE[] = lt_trans[].
if abort is not equal zero, the update process will be canceled
ABORT = 0.
Can anyone throw some light on this?
Regards,
Dhanya.

Unable to stop incorrect date exports

How do we set up a form in Adobe Acrobat XI that allows dates to be formatted a certain way (mmm/dd/yyyy) and exported in the same way to Excel and always be recognized as a "proper" date in Excel?
Currently the following does not work (Attempt #1):
Set up a field; Set the format category as date; Set up a Custom format of "mmm/dd/yyyy"
Create a distribution file
When users fill out the form if they type in an incorrect date, eg., "August 27 2013", the form automagically shows the date on the PDF as "Aug/27/13" - Great!
When the users submit the form and it's brought into the response file the dates are shown in a default date format of mm/dd/yyyy - Fine, once the form owners understand this
When the form owners export the information the data exported is the same as the original users entered it, not as it was automagically formatted to. For instance, if submitters originally entered "August 27, 2013" then that's what goes across to Excel. And some of these formats Excel doesn't know how to convert. - Understandably frustrating for form owners
Attempt #2: As a workaround we set up special formatting that has a mask of "AAA/99/9999". This at least provides forces the users to use the same formatting, but is confusing the submitters when they need to enter dates from 1-9 and we've also found that the conversion of this format to a date in Excel doesn't work, but at least it's consistent! Javascript was also added to force users to use specific month abbreviations.
d = new Date(event.value.replace(/-/g, " "));
if (!Date.parse(d)){app.alert("Please enter in a proper date.\n\nThe month abbreviations are: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec");}
Attempt #3: The last attempt was to continue to use the set up as Attempt #1, but to also use the javascript from Attempt #2. The theory being that if a user entered in "August 27 2013" the javascript would complain. Alas, the javascript appears to run after Adobe automagically does its date format conversion.
Does anyone know how to get around this or have any other ideas to either enforce a usable date format or have Adobe export the dates as they've been automatically formatted to? We've tried to find a way to turn off the automatic date conversion that Adobe's running, but haven't found a way yet. Another option seemed to be to allow a masking that allowed for optional characters (so that the "0" wouldn't be needed for the dates 1-9) but there doesn't seem to be one.
Thanks in advance!

Since there was no clear way to ensure that the date formatting was correct prior to exporting, we're going to get the respondants to use drop downs to ensure the formatting is correct. Not the most convenient for the users though as they're accustomed to being able to type in the values to select it (e.g., for the date of 23 they would expect to enter 2 then 3 for 23) based on other applications, but the Adobe pull downs don't "group" what's been entered (e.g., 2 then 3 will select 30, not 23) and so it will take them a bit to get used to it. I still can't believe that Adobe wouldn't simply export what it's been formatted to though... after all that's what we set the form up for.

Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air

Calendar Tile on Windows 8.1 displaying incorrect date for icloud calendar but date icon displays correct date on iPhone 5 and iPad Air. Date on Windows 8.1 is correct. Thank you.

Try doing a reset on your phone. Sounds like your carrier's time set is not getting through to your device. If the reset doesn't do it, then go to Settings>General>Reset>Reset Network Settings. That should do it.

IDoc with incorrect data is expected to fail but it does not

Hi All,
The Job CQM_CR_O_IF103_IN_INOVIS_ORDER3 got cancelled as result of a short dump. In the initial investigation we found that the IDoc 0000000012089824 had an incorrect information i.e. it had a material which did not
exist. The IDoc is expected to fail and give an error message but has not done so.
We also observed the IDoc does not fail when the incorrect materialhappens to be the last material in the IDoc.
The workaround was to fail the IDoc manually and then the subsequent jobs runs successfully.
Would like to know why the IDoc is not failing when it has incorrect
data.
Thanks & Regards,

Hello,
the idoc fails only if there is a hard error in the segment, means i.e. if there is a wrong transaction type or missing ... But I think that the system behavior is correct, because the idoc cannot fail because a product is "just" wrong. This is no hard error, you should then get an error in the transaction that i.e. the product does not exists. You can try to use badi CRMXIF_ORDER_MAP to check the products, but then please make sure that note 1644057 is implemented.
BR
Rene

IDoc with incorrect data is expected to fail but does not

Hi All,
The Job CQM_CR_O_IF103_IN_INOVIS_ORDER3 got cancelled as result of a short dump. In the initial investigation we found that the IDoc 0000000012089824 had an incorrect information i.e. it had a material which did not
exist. The IDoc is expected to fail and give an error message but has not done so.
We also observed the IDoc does not fail when the incorrect materialhappens to be the last material in the IDoc.
The workaround was to fail the IDoc manually and then the subsequent jobs runs successfully.
Would like to know why the IDoc is not failing when it has incorrect
data.
Thanks & Regards,

Hello,
the idoc fails only if there is a hard error in the segment, means i.e. if there is a wrong transaction type or missing ... But I think that the system behavior is correct, because the idoc cannot fail because a product is "just" wrong. This is no hard error, you should then get an error in the transaction that i.e. the product does not exists. You can try to use badi CRMXIF_ORDER_MAP to check the products, but then please make sure that note 1644057 is implemented.
BR
Rene

Incorrect dates on iPhoto video when accessed by iMovie '09??

Hi,
I have a few videos in iPhoto. All have the correct time and date.
iMovie '09 has access to these, but is showing the incorrect date on some of them (even though iPhoto is showing the correct date). The date is the same - 31 December 1903.
It has been like this since I first used iMovie '09.
Can anybody help?
Cheers.
BTW, how do I contact Apple support about something like this? I can't find any e-mail support.
Message was edited by: NeddySeagoon

NeddySeagoon - wondering if you found the answer to this?
I too have iPhoto videos showing up in iMovie fine, but the dates are wrong in iMovie (correct in iPhoto).
Also, I have updated video titles in iPhoto, but those titles are not showing up consistently in iMovie. Perhaps related issue, I'm not sure.
Any idea if this could be a permissions issue? (Video is stored on an external drive). Or something else?
Thanks!

Reserved fields in the catalog record have incorrect data???

I inserted the orginal installation disk for the Mac mini. I ran the verify disk. Then nine of these messages in red showed - "Reserved fields in the catalog record have incorrect data." I then did repair disk and now it shows that 1 volume could not be repaired. I have the MiniStack as well. I am assuming that the Hard Drive is the one needing repair. Not the MiniStack which also has OS installed along with Classic. How can I fix the disk? How important is the message in red?

You have directory damage.
Use Disk Warrior to repair the drive: http://www.alsoft.com
Explanation of what directory damage is and what causes it: http://alsoft.com/DiskWarrior/details4.html
The other option is to wipe your drive and re-install everything.

VISA Read gets incorrect data from serial connection

I am having difficulty using the VISA functions in LabVIEW to read data from a virtual COM port. Data is being sent from a serial to USB chip via a USB connection using OpenSDA drivers. I have a python program written to read from this chip as well, and it never has an issue. However, when trying to achieve the same read in LabVIEW I am running into the problem of getting incorrect data in the read buffer using the VISA Read function.
I have a VISA Configure Serial Port function set up with a control to select the COM port that the device is plugged into. Baud rate is default at 9600. Termination char of my data is a newline, which is also default. Enable termination char is set to true. A VISA Open function follows this configuration, and then feeds the VISA Resource Name Out into a while loop where a VISA Read function displays the data in read buffer. Byte count for the VISA Read is set to 20 so I can read more of the erroneous datat, however actual data will only be 6-12 bytes. The while loop has a wait function, and no matter how much I slow down the readings I still get incorrect data (I have tried 20ms thru 1000ms).
The data I expect to receive in the read buffer from VISA Read is in the form of "0-255,0-255,0-255\n", like the following:
51,93,31\n
or
51,193,128\n
And occasionally I receive this data correctly, however I intermittently (sometimes every couple reads, sometimes a couple times in a row) get incorrect readings like this:
51,1\n
51,193739\n
\n
51,1933,191\n
51,,193,196\n
51,1933,252
51,203,116203,186\n
Where it seems like the read data is truncated, missing characters, or has additional characters. Looking at these values, however, it seems like the read was done incorrectly because the bytes seem partially correct (51 is the first number even in incorrect reads).
I have search but haven't found a similar issue and I am not sure what to try from here on. Any help is appreciated. Thanks!
Attachments:
Serial_Read_debugging.vi ‏13 KB

The first thing is that none of the error clusters are connected so you could be getting errors that you are not seeing. Are you sure about the comm parameters? Finally, I have never had a lot of luck looking for termination characters. You might want to just capture data and append each read into one long string just to see if you are still seeing this strangeness.
What sort of device is returning the data? How often does it spit out the data? How much distance is there between it and your computer? Can you configure it append something like a checksum or crc to the data?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Crystal report showing Incorrect data against Bex Query

I have created Crystal report on top of Bex Query, I have not done any calculations in the report, just dragging structure and key figure in the report, ran for one month, when I compare with Bex Query with same period, it is showing incorrect data.
I don't know what can be wrong here?
We are Business Objects 3.1 SP3.
Thanks,
Ravi

HI,
I would suggest you trace the workflow in Web INtelligence according to these notes:
Tracing:
Unix : Note 1235111
Windows : Note 1260004
and then post a link for downloading the trace files here.
regards
Ingo

BOXIR2 FP4.6 -WebI report with merged dimensions: Incorrect data

Issue: BOXIR2 FP 4.6 -WebI report with merged dimensions: Max value of an object from second query is displayed in the report even when the formula is based on the object from the first Query.
Data displays properly on BOXIR2 SP2.
Steps to reproduce.
1.Use u2018Island Resort Marketingu2019 Universe to create a WebI report.
2. Create a Query with objects u2018Reservation Dateu2019 and u2018Future guestsu2019 and apply a query filter where the u2018Reservation Dateu2019 is between 1/1/2001 and 31/1/2001 an Run the query.
3. Add a second Query with the same objects i.e. u2018Reservation Dateu2019 and u2018Future guestsu2019 and apply a query filter where the u2018Reservation Dateu2019 is between 1/1/2001 and 31/12/2001.
4. Create a report variable MaxDate using the syntax "=Max([Query 1].[Reservation Date]) In Report"
5. Use the objects u2018Reservation Date Query 2u2019, u2018Future guests Query 2u2019 and u2018MaxDateu2019 variable to create a table in the report.
You will find the Maxdate column displays Max date values of u2018Reservation Date Query 2u2019 instead of u2018Reservation Date Query 1u2019.
Could you please advice me on this issue.

Hi Hiteshwar,
MaxDate variable returns a maximum of Reservation date from Query 1 i.e. 1/15/01 which is correct. If you put that variable separately it will display that date correctly but you are grouping it along with objects from the query2 thatu2019s why it is displaying correct value for Query 2 where it finds 1/15/01, but for other values WEBI canu2019t group this value as it refers its formula which contains Query 1 reservation date.
Hence we canu2019t say it is displaying values from Query 2 it is taking values from Query1 itself for 1/15/2001 and for remaining values it is taking non matching values from Query 2 with which it is grouping.
If you put that variable with objects from Query1 it wonu2019t display 1/15/01 but all values reservation date from query 1 contains because it is grouping based on reservation date though it is single max value.
Even when you write "=Max(Query 2.Reservation Date) formula and use it with objects from query 1 though it contains so many values it matches (Groups) only the values from reservation date from Query 1.and displays only those values i.e. 1/1/2001 and 1/15/01.
MaxDate returns 1/15/01 as Maximum Date value from Query 1 but Query 2 contains value far more greater than 1/15/01 hense that will be more incorrect data if WEBI displays maxdate as 1/15/01 along with Query 2 objects.
Here we can avoid this behavior by Custom SQL but MaxDate is a report level variable hence we canu2019t edit SQL.
If your data contains some duplicate values WEBI will repeat MaxDate value like
Reservation date     Restaurant           Future_Guests    Total Guests
1/1/01                          ABC                         3                   3
1/15/01                       XYZ                          4                   8
1/16/01                       XYZ                          4                   8
By default, WEBI Groups Total Guests based on the Restaurant and Reservation Date, but if we want we can group those values based only on Restaurant which will duplicate Total Guest values for Restaurant XYZ. But you report contains only one dimension with all unique Values we canu2019t group those.
I hope this is clear.
Thanksu2026
Pratik

Incorrect date getting determined

Hi,
I not sure what is happening. I written the below code. The begda and endda is between 11.06.2012 and 24.06.2012 but the begda for the particular pernr is 14.05.2012. gt_pa0008 has the correct values but its very strange gs_pa0008 is fetching an incorrect date but the other fields are correct
PROVIDE FIELDS * FROM gt_pa0001 INTO gs_pa0001 VALID flag1
           BOUNDS begda AND endda
           FIELDS * FROM gt_pa0008 INTO gs_pa0008 VALID flag2
           BOUNDS begda AND endda
           FIELDS * FROM gt_pa0007 INTO gs_pa0007 VALID flag3
           BOUNDS begda AND endda
    where begda <= lv_date AND endda >= wa_t549q-begda
     BETWEEN pn-begda AND pn-endda.
Thank you.
Regards,
Narayani

This relates to an incorrect FX Rate determination when a specific condition record is used.
Under normal circumstances, this should not occur, but it looks like, if the ZHIV condition record is set up in EUR, rather than, (in this case) HRK, the values in the sales order / invoice and subsequently finance are converted back to front, (i.e 1 EUR = 7 HRK, rather than 7HRK = 1 EUR).

Incorrect Dates and Duplicate Entries in Calendar

Hello,
I have had some duplication and incorrect date problems with calendar entries on my iPhone, but not iCal on the Mac that I synch it with. Maybe someone has a clue which troubleshooting path I can follow.
Duplicate entries:
I originally had "all calendars" synching and only a few of these calendars were duplicationg all of their entires. Upon further inspection in the iTunes synch menus, I found that I had a duplicate of each calendar; one with [email protected] and [email protected] I marked only the [email protected] calendars and that has taken care of the duplicates that I can see so far.
Incorrect dates:
I have a few repeating entries in one calendar that was duplicating above, but they are listed with incorrect dates on the iPhone only. These entries are marked all day events, but the pattern is for all the entries to be one day early vs. what is indicated on iCal. Forcing a reload of iCal data from my Mac doesn't change anything.
There are a few things that I could do in my troubleshooting, but are labor intensive. I just thought that I would see if my issue ring a bell with anyone and/or there is a bug that has already been identified.
“Technological change is like an axe in the hands of a pathological criminal.” (Albert Einstein, 1941),
Dr. Z.

Ok you can try one thing first, less invasive to see if it clears one set of contacts.
Open your contacts
Swipe down from the top edge > Settings.
Scroll down and turn off each of the various contact accounts.
tap BACK at lower left and now view your contacts.
All that should be left are the "local" contacts. Do you see any, and are they the contacts duplicated?
If so, then close all that and return to your main homescreen.
To clear the local calendar or contact database on the BlackBerry 10 smartphone, complete the following steps:
Swipe down from the top bezel on the home screen, and select Settings.
Select Accounts.
Tap the action menu button (3 vertical dots) on the bottom-right.
Select Clear Local Contacts or Clear Local Calendar.
Now, view your contacts app again. Make sure the ALL TAB is displayed at lower left.
Scroll through and check for duplicates.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Flickr Group RSS feed has incorrect dates in Mail - How do I fix this?

I since I've updated to Safari 3.1 RSS posts from Flickr group pools have had an incorrect 'Date Received'. Rather than the date they were added to the group pool (the date the RSS post was sent/received) new posts are now dated by the date the photo was uploaded, which could be significantly in the past. So my RSS mailbox is in completely the wrong order. I'm not 100% sure that this is down to the Safari 3.1 update, but it was definitely not a problem before I made the update.
I've checked on other RSS readers and they all work correctly. I also posted on the Flickr Help Forum (http://www.flickr.com/help/forum/en-us/69088/) and it would appear that others have had the same problem with Mail.
Any help would be much appreciated!

It appears the behavior is caused by iCloud pushing the information, to include the password, to Mail.
If I delete my iCloud account password and save the changes, the password reappears without me typing it in.
If I go to System Preferences/iCloud and uncheck the sync Mail box, my iCloud account in Mail disappears. When I recheck the sync Mail box, the account reappears, complete with password.
Based on my testing, you are stuck with things the way they are.
If you want to provide feedback to Apple, you can do that in Mail under the Mail menu.

FYI DU error:"Reserved fields in the catalog record have incorrect data"

I had a very perplexing problem...
My iMac G5 was shutting down by itself so I took it to Apple and had the power supply replaced. After it was repaired I was concerned about the hard drive health after the unexpected shutdowns. So I ran Disk Utility and encountered the following...
The iMac G5 is running OS 10.4.6.
I ran "Repair Disk Permissions" from Disk Utility and encountered no errors.
I ran "Verify Disk" from Disk Utility on the drive and I get these results (copied from DiskUtility.log):
Verifying volume “TheDisk”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Reserved fields in the catalog record have incorrect data
Checking volume bitmap.
Checking volume information.
The volume TheDisk needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying “TheDisk” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
This occurs whether I run it while booted from the hard drive or the restore disc. While booted from the restore disc, running repair disc indicates that the failure could not be fixed.
Booted from the hardware test disc and all tests passed.
Booted from TechTool Pro disc and all the tests passed.
Booted from Disk Warrior (had to get the "free" update to boot my iMac G5) and rebuilt directory. No errors reported.
Still same error reported in Disk Utility. ???
Booted iMac in 'safe' mode. Rebooted iMac normally.
Disk Utility now reports success!

Sorry but this is not assistance to you but an additional request for help from someone!!!
I had the same thing occur just now!!!! I have used everything in site and keeps returning............
Hope someone has an answer as to why this occured....

Incorrect dates in Moments

Similar Messages

Maybe you are looking for