Incorrect dates when sharing between iMac & MBP

When I try to import a shared album from my iMac to my MBP using iPhoto sharing in preferences, some of the photos' dates are incorrect. They are correct on the iMac, but incorrect when imported onto the MBP.
This only seems to occur with iPhone photos. Photos taken with either of my Canon cameras transfer with the correct date, but iPhone photos all have a date of 1 Jan 2001 00:00:00. (I've just noticed that the GPS data (and I think keywords) are lost too.)
There don't seem to be many options in the sharing menu (under preferences) - it's basically either on or off with a choice of all photos or selected albums.
I've had a quick Google and can't immediately see this described elsewhere. I'd be grateful if anyone can suggest what I'm doing wrong.
Thanks
prx

Thanks for the super quick response!
I dragged the photos to make sure they moved (or were copied) to the MBP from the iMac. (When I first tried it the photos clearly didn't move as they were not viewable full size on the MBP when iPhoto was closed on the iMac, yet thumbnails/previews were still visible.)
Having moved the photos, I thought the date was in the exif data within the photo jpg file, so am surprised that it got changed. What I'm finding most odd is that only iPhone photos are affected. I'd have thought that those would have been the ones that transferred perfectly!
Would it be better to export and re-import (although I will investigate iLM - I've seen it mentioned before.
prx

Similar Messages

Insufficient privledges when sharing between iMac and Powerbook

I just upgraded both my powerbook and iMac to Leopard and want to turn on file sharing between the two. The way it used to work with Tiger, I would just click on the drive on my network and it would give me read and write privledges. Now it is saying that I have insufficient privledges. I can get the powerbook to mount the iMac and vice versa but can't seem to do much else.
I am trying to move my iPhoto library from my Powerbook to my iMac.
Thanks

If you are trying to write directly into the iPhoto Library, note that it is not a regular folder but a package. The permissions on the iPhoto Library package only allow writing by the owner, so another approach is needed, such as those mentioned in http://support.apple.com/kb/HT1198

Inform users on unsaved data when switching between/starting new TaskFlows?

Hi
In our case, we are using the multiTaskFlow concept to dynamically start new TaskFlows in Tabs. The simple requirement is to have a generic way to inform users on modified unsaved data when switching or starting new TaskFlow
I did research in google for answers, but did not found anything working.
For example, I added following checks (df=dirtyFlag) just before switching between Tabs and Menu-items:
boolean df1 = am.getApplicationModuleDef().isDirty();
boolean df2 = ControllerContext.getInstance().getCurrentRootViewPort().isDataDirty();
boolean df3 = ControllerContext.getInstance().getCurrentViewPort().isDataDirty();
boolean df4 = AdfFacesContext.getCurrentInstance().getDirtyPageHandler().isDataDirty();
boolean df5 = am.getTransaction().isDirty();
boolean df6 = am.getDBTransaction().isDirty();
boolean df7 = bindingContext.getDefaultDataControl().isTransactionDirty();
boolean df8 = dcBindingContainer.getDataControl().isTransactionModified();
boolean df9 = dcBindingContainer.getDataControl().isTransactionDirty();
Start Application and perform a TAB switch without searching or changing anything
df1 true
df2 false
df3 false
df4 false
df5 false
df6 false
df7 false
df8 false
df9 false
Within a TaskFlow I perform a SEARCH and perform a TAB switch, flags change to following:
df1 true
df2 true
df3 true
df4 true
df5 true
df6 true
df7 false
df8 false
df9 false
I MODIFY values within TF and perform a TAB switch, flags remain same and regardless what I do, they remain so:
df1 true
df2 true
df3 true
df4 true
df5 true
df6 true
df7 false
df8 false
df9 false
Do you know a working approach?
Thanks in advance!

Hi,
its for when you leave a view, not when you switch task flows in a page. To get back to your question, one thing you forgot to mention is what data control state is it that the task flows have: shared or isolated? If they have a shared state then only a single transaction is on and you should be able to tell the dirty state by calling
boolean df2 = ControllerContext.getInstance().getCurrentRootViewPort().isDataDirty();
However, if the task flow is in isolated mode then you will need to get a handle to the data control frame used by that task flow.
BindingContext ctx = oracle.adf.controller.binding.BindingUtils.getBindingContext();
String frameName = ctx.getCurrentDataControlFrame();
DataControlFrame frame = ctx.findDataControlFrame(frameName);
boolean isDirty = frame.isTransactionDirty();
//see: http://docs.oracle.com/cd/E15051_01/apirefs.1111/e10653/oracle/adf/model/DataControlFrame.htmlHowever, this information is only available from within the task flow, which means to check this from the outside you need to provide a mechanism to get to this information (contextual events would be an option. You define a contextual event receiver on the task flows that when called checks the current transaction state and then "fires" the answer back to the caller, which then obtains a map of task flow transaction states to check before navigating away or switching task flows.
Frank
Edited by: Frank Nimphius on Apr 11, 2013 2:48 PM

File sharing between iMac Leopard and Vista Laptop!

ok this is my thing, i have an imac (leopard) that is connected wirelesslly and a laptop (vista home premium) that is also connected wirelessly to the same network. im trying to share files between the both so i don't have to use a hard drive every time i want to transfer files from one to the other. what is the process of setting this type of file sharing between the two machines? all wirelessly of course!

Because the iMac and XP are talking, it sound like a Vista sharing thing and the only other help I can offer is to look at these Google Search's:
[sharing vista files over a network|http://www.google.com/custom?q=sharing+vista%20files%20over%20a%20netwo rk&sa=Search&client=pub-6263300333013957&forid=1&ie=ISO-8859-1&oe=ISO-8859-1&cof =GALT:%23008000;GL:1;DIV:%23336699;VLC:663399;AH:center;BGC:FFFFFF;LBGC:336699;A LC:0000FF;LC:0000FF;T:000000;GFNT:0000FF;GIMP:0000FF;FORID:1;&hl=en]
[network sharing vista & leopard|http://www.google.com/custom?hl=en&client=pub-6263300333013957&cof=FORI D%3A1%3BGL%3A1%3BLBGC%3A336699%3BLC%3A%230000ff%3BVLC%3A%23663399%3BGFNT%3A%2300 00ff%3BGIMP%3A%230000ff%3BDIV%3A%23336699%3B&ie=ISO-8859-1&oe=ISO-8859-1&q=netwo rksharing+vista+%26leopard&btnG=Search]

Microsoft files Read-only when sharing between two Macs

I'm trying to share Excel files between my Macbook and my iMac. The files are located on my macbook and I've given read/write permission to the folder containing the files. When I try to open the files on my iMac they open as read only. This happens with Excel, Word and Power Point files.
How do I configure the file sharing so I can open Microsoft files without them being Read only.
I'm using Office:mac 2004 and both the Macbook and iMac are running OS X (10.5.6)

There have been occassions where I have wanted to transfer something from the MBP to the Mini or vice-versa over wi-fi and have encountered problems. I suspect this is because I am using the same user account and they get confused.
Could you please explain, what kind of problems exactly you encountered? Error messages? Corrupted files? And why do you think the problem is caused by the same user profiles?
Like markwmsn I have no problem with sharing using the same account name on all my macs. Only since upgrading to Mt. Lion I usually use AirDrop to send single files. That saves the trouble to copy the files to a public folder.
Do both your macs support Air Drop?
OS X Lion: Share your files with others near you
and the requirements: HT5444
Regards
Léonie

Sharing between iMac and MacBook Pro

I just got a MacBook Pro. I already have an iMac, and I was curious if there was a way to share info between the two without connecting them via firewire? (For example, sharing my itunes library between the two computers)

This does not work!. I have a MacBook Pro and iMac and i want my Macbook to be able to add content to my iMac. I am burining CD's and movies that I own so i can view and listen on AppleTV but When adding content via my Macbook pro (Beacuse it has the CDROM) i want it to be available on the iMac and on the Macbook via my home network.
To get around the issue i have shared the Automaticlly Add to Itunes foler on my iMac so after i burn the files i can copy them over. I just hate doing this step.
Any Ideas?

I have updated to lion. Set up an iCloud so contacts and calendar are shared between iMac iPhone 4s and iPad 1. But iTunes is telling me to update the software on the iPad and iPhone, but it just gets stuck contacting the software server. What should I do

I have updated my iMac to lion so I can use iCloud to share contacts and calendar between iPhone 4s and iPads 1. Somehow it seems to have worked although still not sure how to move stuff in and out of iCloud. iTunes is telling me to update the software on the phone and iPad. When I try to do this it just gets stuck with a box saying connecting to software update server. This has never happened before. I cannot update or restore either the phone or the iPad in iTunes although I have synced the info. What should I do?

Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed.

Report Viewer shows incorrect data when viewing pages from last to first

Post Author: Fmorales
CA Forum: .NET
Hello.
I've made a huge report with Crystal Reports for Visual Studio 2005, and sometimes the Report Viewer show data with errors.
If I see all pages of my report in order, 1 first, then 2nd, 3, 4... until the last one.... The report is always correct.
If I see all pages in reverse order, 1 first (shown by default), then last one, then last one-1.... until 2nd.. All years show incorrect, except first one...
In an outer section, for every year, there is a final row which shows summarize calculated data. The error consists in that every value of the row is 0.
It seems that Crystal Report calculates while showing, that's good.. but... Why does it ignore the data before when I see directly the last page?? It forces me to see all pages one by one in ascendant order to ensure data is correct.. I must fix that error.
The way I calculate data in the problematic summarize row is a bit complicated, but I'll try... Let's focus in one only column (the other ones are similar). The summarize value is a formula which simply show a global value :
WhilePrintingRecords;
CurrencyVar margenActual;
which is being increasing or decreasing along the group:
WhilePrintingRecords;
CurrencyVar actual:=actual+CurrentFieldValue;
if {PresupPeriodifMesesAux_DS.TIPO} = 'PAGOS' then CurrencyVar margenActual:=margenActual-CurrentFieldValueelse CurrencyVar margenActual:=margenActual+CurrentFieldValue;
DefaultAttribute
It is placed in the backgrond property of a CrossTab cell in a hidden pre-section... Well.. I know it's a bit complicated, but I have to do that way because it was the only trick I found to make a summarize file before printing data summarized (that's why the line "CurrencyVar actual:=actual+CurrentFieldValue;" appeared in formula). So I also wanted to use this formula to acummulate "margenActual".
In the inner section I reset the actual value (this value always go fine):
WhilePrintingRecords;
CurrencyVar actual:=0;
Before end of year I reset the margenActual value:
WhilePrintingRecords;
CurrencyVar margenActual:=0;
I've tried multiple combinations (using WhileReadingRecords instead WhilePrintingRecords) but data is incorrect or I cannot get rid of visualization page's problem....
Any idea?
Thanks a lot

quote:
Originally posted by:
ntsiii
If you were previously using <mxXML> you WERE using
e4x.
So remove that tag, create an instance variable of the same
name, typed as xml, and in your result handler, do as VarioPegged
suggests, though I would cast/convert to xml first:
companies = XML(event.result);
trace(companies.toXMLString()); to look at your xml
var xlCompanies:XMLList = xmlCompanies..company; //all such
expressions return XMLList, never XML
trace(xmlCompanies.length()); //
Tracy
Ok so the ID of the mxXML was being interpreted as an E4X
variable at compile time?
I tried changing the name of the ID of the HTTPService call
from "marketData" to "MDATA" and assigning the variable marketData
to the result of the HTTPService query, which if I understand you
correctly should basically make everything work as it was before,
but it seems to be a problem.
when I try to run it puts an exclamation point on this line
<toolbox:TreeMap id="treeMap" width="1200" height="800"
dataProvider="{marketData}"
labelField="@cname" weightField="@amount"
colorFunction="{itemToColor}"
toolTipFunction="{itemToToolTip}"/>
That code refers to a SWC file. Apparently it wants
marketData to be a data provider. If I change the dataProvider
reference above to "MDATA" (the ID of the HTTPService) the App
compiles, but I get two errors at runtime:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
ReferenceError: Error #1081: Property @age1 not found on
mx.rpc.http.mxml.HTTPService and there is no default value.
What should I change this reference to? It won't compile if I
use the variable I made for the e4x results and it is reading
gibberish if I have it read directly from the
HTTPService....?

Incorrect date when locale changes

Hi,
Can somebody help me with this.
The following formula is used to get the month out of a date input by a
user at the prompt.
=Month(ToDate(UserResponse("Start Date");"MM/dd/yyyy HH:mm:ss a"))
when the user locale is US and input value is 06/01/2009 00:00:00 AM
gives "June" as the output which is correct. However, when the user
locale changes to UK the same date 01/06/2009 00:00:00 with the below
mentioned formula gives "January" which is incorrect.
=Month(ToDate(UserResponse("Start Date");"MM/dd/yyyy HH:mm:ss"))
Thanks,
Florencio.

Hi,
Based on Operating System the date format changes. So try to create a package with required date format and install in our System for consistency or based on the date standards followed in the country we can change it report as select the required date column -> properties -> select date and define the required date format.
Thanks & Regards,
Suresh

WebI displays incorrect dates when sourced from SAP

We have several issues, all tied to displaying dates from a BEx Query, through the universe, into WebI.
Scenario One: Dates that have a datatype of date will parse in the universe, but will give driver not capable when used in WebI. Could this be tied to an invalid date?
Scenario Two: Dates set with date datatype parse correctly and can be queried in WebI, but return incorrect results. If queried WITHOUT a measure, date appears as one day less than actual date (ex. SAP date = Apr 28, 2009 but universe object set with date datatype shows April 27, 2009. When a measure is added, the same date displays as Sept 27, 1976.
I suspect that we need to modify the data access files in order to accurately convert SAP dates (which by default come into the universe as Character) to a date datatype. If this is the case, are there sample sapen.prm and sap.sbo files to ensure appropriate settings?
Does anyone have additional thoughts on what could be causing this issue? Are there sample sapen.prm and sap.sbo files anyone would be willing to share?
Thanks!

Hi Robin,
If you are using BOE XI 3.1. Then make sure that you apply fixpack 1.4 on it because the issue you are Describing is Fixed in this fix pack.
Here is the Description of that Particular issue In Release Notes of Fix pack 1.4
      ADAPT01181134
      Description:
      When users create a Web Intelligence document with the universe which is built based on SAP data, it fails to display correct values for some Date objects. This problem occurs when users have a timezone of 'GMT-x hours' on the machine where BusinessObjects Enterprise is installed.
      I hope this would solve your problem.
Thanks,
SK.

Using file sharing between iMac and Macbook Air

I have been trying to use file sharing but do not have admin password or disc..When I try to access the iMac from my Air it give the option of using my Apple ID but no password field comes up...I press enter and get the Dialog Box wobble...

I have tried using the guest login but get the message "Access denied to this server, contact administrator". I can access the Air from my iMac but even though they are both running Mavverick some of the dialog boxes appear different. And thats even though I have enabled guest login on the iMac

Ways to keep correct dates when transferring between libraries?

Any tips on how to export between libraries and keep the correct dates with your photos?
I am currently using iPhoto 9. I recently tried to transfer photos from an older library (2002) to a new library.
With past versions of iPhoto, I would burn the "old" - i.e. 2002, library to a DVD, open the "new" library, mount the "old" library DVD and drag the photos from the DVD within iPhoto to copy them into the new library. In the past, when I have used this method, the "dates" that accompanied the photos would be preserved (exporting and importing, however, would cause this data to be lost).
Something is definitely wrong, as my dates on the imported photos range from the year 2000 (before I even owned a digital camera) to 2008 (possibly when I upgraded the 2002 library to iPhoto 8). The mounted library from the disk shows the correct dates, however. The dates only go "bad" on importing them to the new library.
Does anyone have a work-around for this problem? Thank you in advance!

Try using iPhoto Library Manager to move files/albums/events - including metadata - between Libraries.
Regards
TD

How do I set up file sharing between iMAC and MacBook Pro?

I am unable to use "file sharing". When trying to connect as a "registered user" it asks for my server password. What is that? I have tried every password I think it could be. I also can not connect as "using an Apple ID"

You can set up "iCloud" on all of them and select there to sync your Documents. You must be running Mountain Lion on the MBA and iOS 6 on the iPhone and iPad in order to use iCloud:
http://www.apple.com/icloud/setup/

ECT List View Web Part displaying incorrect data when View Item

I have a External Content Type which pulls data from a stored procedure. The stored procedure has 1 parameter - the users logon id. The data retrieved is a list of meetings with start date time, end date time, location, subject, etc. From this ECT there
is an External List which displays all data correctly.
There is 2 pages within the site and its subsites that have list view web parts which display a subset of the info from the external list. When the user clicks a specific meeting to display the complete info on the meeting, the wrong information is displayed,
it always displays the info for the 1st meeting in the list. So, I displayed the BDC Identity field on the list and this field is identical for all the rows since the key for the ECT is the username and hence not unique.
I've spent all day trying to finding a way to resolve this and have come up empty. I've tried to find a way to make the BDC Identity field to be unique, using Business Data View web part, Data View web part, and nothing.
The user needs to be able to click the My Meetings url header on the above pages to see a full list of their meetings so I need the external list. Any ideas how to make the BDC Identity field unique or how to get the View Item on the List View web part to
work correctly?

Sorry, I do not understand what you mean.
I resolved the non unique BDC Identity problem by simply adding the row # to the Username in the stored procedure so the BDC Identity fields on the list records are now unique (although they're really long ie. __bk44003500070057003700560027000200140037003700f600360096001600470056003300,
__bk44003500070057003700560027000200140037003700f600360096001600470056004300 etc). Not sure how it generates the BDC Identity?
I still see the same behaviour when you select a meeting to display the details. It always displays the 1st record in the list.
I added code to the DispForm to display the ID when the page loads and the BDC Identity from the record and verfied that they do match.
I can add another parameter to the stored procedure and just return the row # in that field. What do you mean by make the identifire as Identity in operations?

File sharing between iMac and PC running Windows 7

This can't be a new problem but I am unable to access PC files running Windows 7 on a wireless network. I can see the folders on the PC from the Mac but cannot open nor access the contents. Error message: "The operation can’t be completed because the original item for “name of folder” can’t be found. I have tried every suggestion I've found on internet. Any solutions?

I can access Mac files from PC but not the other way around. I have given "Full COntrol" under Share Permissions on PC; I have selected "Share" for Users, My Documents. I have added Guest User Accounts without passwords. I have tried to access as Owner. I have tried to "Connect to Server" through Finder, smb://computer name/file. Although the file folders are displayed on my Mac when I try to open them I get a "Connection failed. You do not have permission to access the server "computer name". When I try to access from Finder SHARED, the get error message The operation can’t be completed because the original item for “file name” can’t be found.

Incorrect dates when sharing between iMac & MBP

Similar Messages

Maybe you are looking for