Incorrect documents error while posting

Hi Gurus,
While posting the documents for a couple of pernrs for the period 08/2009 I am getting the following error.
"Period 007 in fiscal year 2009 is open for posting for the variant for posting periods 0001. However, you do not have the required authorization."
I have already posted the correct documents for these pernrs for period 07/2009 .
I am not sure why its popping a mssg for period 007/2009
Also the the status of the payroll control record is Exit payroll 08/2009
Any help would be greatly appreciated.

Hi,.
Somewhere missed fiscal year variant periods in the t.code OB29.
If you dont have authorization, Pls concern your FI team they will know where to define fiscal year period 007 and posting period 0001.
If they dont have authorization get the authorization from the basis team. then do the task.
Good luck
Devi

Similar Messages

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Error while posting parked documents

HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Error while posting 561 Document

Dear All
Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
Even OBYC setting for that valuation class already assigned.
please advice.
Regards
Kumar.

Hello Anandhakumar ,
please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
it could solve your query.
regards,
Ninad Kshirsagar

Runtime error while posting a document (FB70/FBS1)

Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?

Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa.

Error while Posting Document in FBV0

Hi Guys,
Iam getting following error while Posting Document in FBV0 which is already parked and it is with tax code.
Error: "No batch input data for screen SAPMF05A 0700"
Kindly suggest
Thanx and Regards
Munender

Also have a look at the following notes:-
=> Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
=> Note 800177 - FB01: No batch input data for SAPMF05A 0700
thanks
G. Lakshmipathi

FA Retirement- 21151: error while posting asset document: '100000039'

Hello Experts,
I have a client who encountered this error during fixed asset retirement - scrapping.
After selecting the asset to be retired, sap did not assign an account in the account column, but the user
was able to save the document. After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'. The document number the systems is referring to is the last document saved but sap did not assign an account code.
Please help. My client is using sap b1 8.81 patch5.
Regards,
Luz

Hi Too Mui Hwee,
What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
Thanks

Error while posting billing documents

Hi,
I am trying to post billing documents for accounting , but I am getting some error related to number range.
I have checked number range assignments, where else I can check to find out error.
Regards
Nidhi

If you are getting error while creating billing document -
Check your number range status assignment in T-Code - VN01
If any userexit is used then check in Userexit MV60AFZZ. There could be a Z-table where the number range may not be properly defined for the Billing Type/ plsnt/etc. as per the settings.
If Billing document is created and you get this error while posting-
Then it would be error with the number range for Accounting Document. Pls. ask the FI person to fix this.
If the above does not solve - pls. mention the exact error with error code.
Thanks

Error while posting a write up for asset belonging to affiliated company

Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
Pragya

Hi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya

ErroR while posting J1IH (TR6)

Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
    to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS                            Dr 2000
SECS                          Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil Kumar

The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar

Error while posting usint tcode f-02 in fi

Hi all,
I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document but while saving it gives me the following error message:
Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
Message no:f1030
DIAGNOSIS:
The application has accessed a funds management or cash management module with parameters messing or defective.
PROCEDURE:
Notify your system administrator.
Hope some body would help me out.
Thanks

Hi,
Not sure if this works out
try checking img-Financial Accounting-Financial Accounting Global Settings-Company Code-Enter Global Parameters
double click on company code and see if any thing is assigned in the feild to FM.
regards
genie

Error while posting J1IS

Hi,
I am getting the below error while posting the J1IS with reference to the STO 351 document.
Could you please advice?
Error updating table J_1IEXCHDR.
Message no. 8I308
Regards,
Mohd Ali.

Check it using SM13 transaction to know the real cause of error.
http://help.sap.com/saphelp_nw04/helpdata/en/e5/de873b35cd11d3acb00000e83539c3/content.htm
Regards,
S Anand

Error while posting FBS1 via BAPI

Hi Experts,
getting below error while posting FBS1 via BAPI_ACC_DOCUMENT_POST
TYPE ID                   NUMBER MESSAGE
E   |RW                  |609   Error in document: BKPF 10000022440GF3032010 TERCLNT303
E   |RW                  |609   Error in document: 100000224 AC_DOC_NO
FB03 Header values --
Document Number 100000250        Company Code    40GF         Fiscal Year     2010
Document Date   30.11.2010       Posting Date    30.11.2010   Period          11
Currency EUR
FB03 Line item 1 ( posting key 40 )
G/L Account     711014
Company Code    40GF
Amount          100,00 EUR
Cost Center     40GF219001
Quantity        0,000
FB03 Line item 2 ( posting key 50 )
G/L Account     167005
Company Code    40GF
Amount          100,00 EUR
Assignment      20101130
Text            ITEM TEXT 7
Please tell me what i am missing in below code because of which i am getting error in return table
FORM fill_header.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
      own_logical_system = gd_documentheader-obj_sys.
gd_documentheader-obj_type   = 'BKPF'.
gd_documentheader-obj_key    = '10000022440GF3032010'.
gd_documentheader-username   = sy-uname.
gd_documentheader-header_txt = 'BAPI Test'.               "#EC NOTEXT
gd_documentheader-obj_key_r =
GD_DOCUMENTHEADER-reason_rev = '05' .
gd_documentheader-comp_code = '40GF'.
GD_DOCUMENTHEADER-AC_DOC_NO = '100000224' .
gd_documentheader-fisc_year = '2010'.
gd_documentheader-doc_date   = sy-datum.
gd_documentheader-pstng_date = sy-datum.
GD_DOCUMENTHEADER-TRANS_DATE =
GD_DOCUMENTHEADER-VALUE_DATE =
GD_DOCUMENTHEADER-FIS_PERIOD = '11' .
GD_DOCUMENTHEADER-DOC_TYPE   = 'SA' .
GD_DOCUMENTHEADER-REF_DOC_NO =
GD_DOCUMENTHEADER-COMPO_ACC =
gd_documentheader-bus_act    = 'RFBU'.
ENDFORM.                    "fill_header
FORM fill_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 1.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = -100.
APPEND T_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 2.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = '100'.
APPEND T_currencyamount.
CLEAR T_currencyamount.
ENDFORM.                    "fill_currencyamount
FORM fill_accountgl.
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 1.
T_accountgl-gl_account     = '0000711014'.
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-DE_CRE_IND     = 'S' .
T_accountgl-tax_code       = 'V1'.
T_ACCOUNTGL-ACCT_KEY       =
T_accountgl-item_text      = 'BAPI Test G/L line item'. "#EC NOTEXT
T_ACCOUNTGL-BUS_AREA       =
T_accountgl-costcenter     = '40GF219001' .
T_ACCOUNTGL-ORDERID        =
T_ACCOUNTGL-MATERIAL       =
T_ACCOUNTGL-QUANTITY       =
T_ACCOUNTGL-BASE_UOM       =
T_ACCOUNTGL-BASE_UOM_ISO   =
T_ACCOUNTGL-PLANT          =
T_accountgl-profIT_ctr     = 'S001' .
T_ACCOUNTGL-WBS_ELEMENT    =
T_ACCOUNTGL-BILL_TYPE      =
T_ACCOUNTGL-DISTR_CHAN     =
T_accountgl-ac_doc_no      =
T_accountgl-acct_type      =
T_accountgl-doc_type       =
T_accountgl-comp_code      = '40GF' .
T_accountgl-func_area      =
T_accountgl-plant          =
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
T_accountgl-pstng_date     =
T_accountgl-value_date     =
T_accountgl-customer       =
T_accountgl-vendor_no      =
T_accountgl-costobject     =
T_accountgl-acttype        =
T_accountgl-val_area       =
T_accountgl-po_number      =
T_accountgl-po_item        =
APPEND T_accountgl to t_accountg2 .
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 2.
T_accountgl-gl_account     = '0000167005'.
T_ACCOUNTGL-STAT_CON       =
T_ACCOUNTGL-REF_KEY_1      =
T_ACCOUNTGL-REF_KEY_2      =
T_ACCOUNTGL-REF_KEY_3      =
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-DE_CRE_IND     = 'H' .
T_accountgl-tax_code       = 'V1'.
T_ACCOUNTGL-ACCT_KEY       =
T_accountgl-item_text      = 'ITEM TEXT 7'. "#EC NOTEXT
T_ACCOUNTGL-BUS_AREA       =
T_accountgl-costcenter     = '40GF219001' .
T_ACCOUNTGL-ORDERID        =
T_ACCOUNTGL-MATERIAL       =
T_ACCOUNTGL-QUANTITY       =
T_ACCOUNTGL-BASE_UOM       =
T_ACCOUNTGL-BASE_UOM_ISO   =
T_ACCOUNTGL-PLANT          =
T_accountgl-profIT_ctr     = 'S001' .
T_ACCOUNTGL-WBS_ELEMENT    =
T_accountgl-ac_doc_no      =
T_accountgl-acct_type      =
T_accountgl-doc_type       =
T_accountgl-comp_code      = '40GF' .
T_accountgl-func_area      =
T_accountgl-plant          =
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
T_accountgl-pstng_date     =
T_accountgl-value_date     =
T_accountgl-customer       =
T_accountgl-vendor_no      =
T_accountgl-costobject     =
T_accountgl-acttype        =
T_accountgl-val_area       =
T_accountgl-po_number      =
T_accountgl-po_item        =
APPEND T_accountgl to t_accountg2 .
ENDFORM.                    "fill_accountgl

Hi Experts,
getting below error while posting FBS1 via BAPI_ACC_DOCUMENT_POST
TYPE ID                   NUMBER MESSAGE
E   |RW                  |609   Error in document: BKPF 10000022440GF3032010 TERCLNT303
E   |RW                  |609   Error in document: 100000224 AC_DOC_NO
FB03 Header values --
Document Number 100000250          Company Code    40GF         Fiscal Year     2010
Document Date   30.11.2010           Posting Date    30.11.2010   Period          11
Currency EUR
FB03 Line item 1 ( posting key 40 )
G/L Account     711014
Company Code    40GF
Amount          100,00 EUR
Cost Center     40GF219001
Quantity        0,000
FB03 Line item 2 ( posting key 50 )
G/L Account     167005
Company Code    40GF
Amount          100,00 EUR
Assignment      20101130
Text            ITEM TEXT 7
Please tell me what i am missing in below code because of which i am getting error in return table
FORM fill_header.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
      own_logical_system = gd_documentheader-obj_sys.
gd_documentheader-obj_type   = 'BKPF'.
gd_documentheader-obj_key    = '10000022440GF3032010'.
gd_documentheader-username   = sy-uname
gd_documentheader-obj_key_r =
GD_DOCUMENTHEADER-reason_rev = '05' .
gd_documentheader-comp_code = '40GF'.
GD_DOCUMENTHEADER-AC_DOC_NO = '100000224' .
gd_documentheader-fisc_year = '2010'.
gd_documentheader-doc_date   = sy-datum.
gd_documentheader-pstng_date = sy-datum.
GD_DOCUMENTHEADER-FIS_PERIOD = '11' .
GD_DOCUMENTHEADER-DOC_TYPE   = 'SA' .
gd_documentheader-bus_act    = 'RFBU'.
ENDFORM.                    "fill_header
FORM fill_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 1.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = -100.
APPEND T_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 2.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = '100'.
APPEND T_currencyamount.
CLEAR T_currencyamount.
ENDFORM.                    "fill_currencyamount
FORM fill_accountgl.
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 1.
T_accountgl-gl_account     = '0000711014'.
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-item_text      = 'BAPI Test 1'.
T_accountgl-costcenter     = '40GF219001' .
T_accountgl-profIT_ctr     = 'S001' .
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
APPEND T_accountgl to t_accountg2 .
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 2.
T_accountgl-gl_account     = '0000167005'.
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-item_text      = 'ITEM TEXT 7'.
T_accountgl-comp_code      = '40GF' .
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
APPEND T_accountgl to t_accountg2 .
ENDFORM.                    "fill_accountgl

Error while posting sales f-22

Error while posting sales F-22
Cost center 1000/150020 is Blocked againest revenue postings on 03.11.2008

Hi,
In your document you have cost centre assigned on revenue line. You have to unlock it for posting revenues: go to KS02 - Control - and unlock the actual revenues flag.
Regards,
Eli

Error while posting journal entry: -5012/unbalanced transaction

Hi everyone,
I got this error message when trying to add a FA Retirement. FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
FA G/L Account Determination is completely defined.
Would appreciate any reply. Thanks in advance!
Jac

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

Incorrect documents error while posting

Similar Messages

Maybe you are looking for