Incorrect entry in 4506 configuration

Current configuration: 
line con 0
stopbits 1
line 1 5
password ciscocisco
login
exec-character-bits 8
length 0
width 0
no history
international
transport input telnet
speed 9600
I need to delete line 1 5, but I get an error message (Vty line 1 doesn't exist).  Apparently, because of this bogus entry, I cannot create line vty 0 4.  Is there any way to delete this entry without making a copy and re-configuring the whole switch?

Yes - that is the problem.  This is the way the switch was configured when I got here.  I know I could set the switch to original configuration and re-program it, I was just trying to avoid that.  But there doesn't seem to be any way to delete the bad lines.

Similar Messages

  • Actions- Incorrect Entry Date and Corrected Entry Date

    i am going by the link below
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/48/35c5a94abf11d18a0f0000e816ae6e/frameset.htm
    But I am not able to find "Incorrect Entry Date" and "Corrected Entry Date" Actions anywhere. Not even the drop down of Actions List
    Where are they acually?

    As said by our Gurus PA41 is used to change the Corrected entry and incorect entry
    u can do the same thru PA40 if u select 70 and 71 action types this screens are nothing bu the screens u see in PA41
    for ur info

  • How to correct incorrect entry date?

    Hi,
    The scenario is as follows:-
    Employees are hired from 01.01.2000
    Payroll has run till last month(28.02.2007)
    Now, few employees hire date has to be back-dated (01.01.1998)
    The following should not happen in the event of the date getting changed.
    Should not delete clusters
    Payroll should not trigger retro, even if it triggers it has to be controlled
    Infotypes 7 and 8 need not be changed, means date can be 01.01.2000
    What i did:-
    Changed the payroll status
    Applied PA41
    This is the suggestion offered by library in the event of correcting entry after having run payroll. But, it doesn't work, moreover action types incorrect entry and correct date are not available and library mentions that the action types are not available as it will be used in exceptional circumstances. It allows to change the entry date if i delete the clusters.
    Mailing to the forum after having tried several times!
    Appreciate the inputs.
    Regards
    KK

    Hello Manoj,
    I deleted the "accounted  to" and deleted ERA as well.
    But when i try to correct the action date, it doesn't allow me to change the date to 01.01.1998. Hope you'd have read my thread precisely!
    When i try to correct actions, the action types "incorrect entry" and "correct entries" are missing. Unless, i delete the clusters, it doesn't allow me to change the entry date.
    More inputs!
    Regards
    KK

  • How to delete incorrect entries Mavericks

    DH accidentally typed an incorrect username on a webpage.  Now everytime I start to type the correct username the incorrect one (with the same first two letters) pops up in a box underneath, along with the correct one.
    How can I delete the incorrect entry?  I have tried fn+shift+delete without success.

    Thanks!  I just figured it out right after I posted.  This particular website was not under "usernames and passwords" where I thought it would be.  Instead it was under "other forms". 

  • Update control of movement type incorrect (entry Z31 X X _ L )

    Hi gurus,
    Business reporting  requirment to used  M T 301,  currently we using MT641 fr plant to plnt (stock in transit) transfer .
    now we have to replace 641.
    i)Kindly advice???
    I have  create Z31 copy  of MT 301 but shown  below error at PGI.
    ii)Update control of movement type incorrect (entry Z31 X X _ L )
        Error Message No E M7 226
    how to remove this error?
    thanks in advance.
    sapsd25

    Hi G. LakshmipathiLaxmipati guru,
    thanks for the prompt response.
    T code VAL01n & VL02n is alreday.
    Is their any MT similar to 301 use for stock transfer with DO & Excise
    Thanks
    SAPSD25

  • The local node entry in Cluster Configuration information does not match wi

    In installing 10.1.0.3 CRS on Solaris 8 x86, I keep getting the error, "The local node entry in Cluster Configuration information does not match with the entry in /etc file." Both addresses are defined in the /etc/inet/hosts and are pingable. There seems to be no way to get past this issue. Earlier I installed 10.2.0.1 CRS on SLES9 SP2 on a system with the same network settings and had no problem. Is there some way to force the installer to accept the addresses given and proceed past this step?

    All,
    I think there can be two problems
    1.
    if your host file looks as follows
    # Public
    192.168.2.x rac1.localdomain rac1
    192.168.2.x rac2.localdomain rac2
    #Private
    192.168.0.x rac1-priv.localdomain rac1-priv
    192.168.0.x rac2-priv.localdomain rac2-priv
    #Virtual
    192.168.2.x rac1-vip.localdomain rac1-vip
    192.168.2.x rac2-vip.localdomain rac2-vip
    then you should be able to do rsh or ssh sucessfully for each aliases at least one from each nodes
    (ex)
    on node rac1
    ssh rac1 date
    ssh rac1.localdomain date
    ssh rac2 date
    ssh rac2.localdomain date
    2. you should create user equivalance on all the nodes as follows
    Edit the /etc/hosts.equiv file to include all the RAC nodes:
    +rac1 oracle
    +rac2 oracle
    +rac1-priv oracle
    +rac2-priv oracle                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Incorrect entry in device list

    I have an EA4500 and recently I noticed two entries in the device list for my iphone.  One has all the correct data and the other has the same ipaddress but the MAC address is incorrect.  The second MAC address is FF:FF:FF:FF:FF.  I can't delete the incorrect entry by rebooting the router.
    My firmware is the latest ver and I use MAC filtering.  How can I eliminate the incorrect device?

    Good to know that you were able to remove it. From what I notice with the device list, you cannot delete a device from the list if that device will show as online. So better turn off that device first then click the x-mark to remove it completely.

  • Invalid Entry in Trex Configuration

    Hi gurus,
    We have just installed an application server and attached it to our portal system.
    When a user logs into this application server and tries to make a search an error message is displayed:
    "Error during search occurred - com.sapportals.wcm.WcmException: Invalid entry in configuration: section nameserver, key address, value tcpip://<nameserverhost>:<nameserverport> is invalid (Errorcode 7213)"
    Any suggestions?
    Kindest Regards,
    Tolga

    Hi Tolga
    Did you forget to do this configuration:
    http://help.sap.com/saphelp_nw70/helpdata/EN/c7/e0d13f7fb44c21e10000000a1550b0/frameset.htm
    Best regards,
    Martin Søgaard

  • Service entry sheet - Smartform configuration

    Hi,
    I need to configure Smartform for the Service entry layout.
    Currently I can see that it is only allowing Sap Scripts for this.
    Can anyone please let me know on how can I assign smartform to the service entry sheet.
    Regards,
    Shahu

    Hi Shahu,
    Not all SAP modules have been updated to use Smartforms.
    If you prefer to use Smartform rather than copy the standard SAPscript you can take a copy of the standard print program SAPFM11P and take out the parts that call the SAPscript, then replace them with code to call your Smartform.
    Regards,
    Nick

  • Missing DELETION/ARCHIVE category entries in IE configuration

    hello gurus
    The PI production server in our landscape is running out of space.
    We are trying to schedule archiving/deletion jobs.
    While checking PI system, we could see that there are no entries for
    ARCHIVE/DELETION parameter category in Integration Engine configuration.
    (SXMB_ADM>Integration Engine Configuration>Change Configuration).
    Will these be maintained when we run the jobs or do we have to maintain
    them explicitly?
    Thanks in advance.
    Regards,
    Xineohpi

    Hello,
    I suppose they will be created after you run:
    SXMB_ADM>Define Interfaces for Archiving and Retention Period -> Retention Period
    /Jakub Turminski

  • How can I remove incorrect entry in OCR

    Hi all
    During a CRS upgrade from 10.2.0.4 to 11gR2 I noticed some errors relating to some values that should not have been there! This might have been due to an incorrectly removed node or database previously.
    Anyway, the output from ocrdump looks like this
    /u01/app/oracle/product/10.2.0/crs/bin/ocrdump.bin -stdout -keyname DATABASE.ONS_HOSTS
    [DATABASE.ONS_HOSTS]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.node4!my!domain]
    ORATEXT : node4.deg.aus
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.node4!my!domain.PORT]
    ORATEXT :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.node2!my!domain]
    ORATEXT : node2.deg.aus
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.node2!my!domain.PORT]
    ORATEXT : 6200
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.ONS_HOSTS.node1]
    ORATEXT : node1
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}
    [DATABASE.ONS_HOSTS.node1.PORT]
    ORATEXT : 6200
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_READ, OTHER_PERMISSION : PROCR_READ, USER_NAME : root, GROUP_NAME : root}I need to remove the entries [DATABASE.ONS_HOSTS.node4!my!domain] and [DATABASE.ONS_HOSTS.node4!my!domain.PORT] and wondered if I should use racgons remove_config - although as you will see there is no port listed for the [DATABASE.ONS_HOSTS.node4!my!domain]
    Many thanks

    Thanks again Sebastian - that really helped.
    If you dont mind one last question, I seem to have some orphan entries in OCR.
    $ ocrdump.bin -stdout -keyname DATABASE.LOG
    [DATABASE.LOG]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_ALL_ACCESS, USER_NAME : oracle, GROUP_NAME : oinstall}
    [DATABASE.LOG.test]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_ALL_ACCESS, USER_NAME : oratestt, GROUP_NAME : oinstall}
    [DATABASE.LOG.test.INSTANCE]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_ALL_ACCESS, USER_NAME : oratest, GROUP_NAME : oinstall}
    [DATABASE.LOG.testdb]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oratest, GROUP_NAME : oinstall}
    [DATABASE.LOG.testdb.INSTANCE]
    UNDEF :
    SECURITY : {USER_PERMISSION : PROCR_ALL_ACCESS, GROUP_PERMISSION : PROCR_ALL_ACCESS, OTHER_PERMISSION : PROCR_READ, USER_NAME : oratest, GROUP_NAME : oinstall}Basically, the database and instances test and testdb do not exist but I cannot remove them using srvctl remove database or srvctl remove instance
    as I get PRKO-2007 : Invalid instance name: or PRKR-1001 : cluster database TESTDB does not exist. Also they do not appear in crs_stat.
    Any ideas how I can remove them from OCR? If I were to try crs_unregister, I am not sure what resource name to use because they don't show up in crs_stat.
    Many thanks

  • Mail (outgoing mail server) defaults to an old incorrect entry.

    Where are the mail (outgoing mail server) settings stored?
    FOLLOW THIS THREAD: mail 2.1; preferences; accounts; Account information; Outgoing mail Server (SMTP); open this window and go to edit server list; highlight and delete all entries; then go back to account information; and select; server settings. This will open into a new window where you may type in the Outgoing mail server.
    The outgoing mail server then in use. defaults into a previously incorrect outgoing mail server.
    Where are these outgoing mail server settings stored and how do I delete them?

    Melvin,
    There is a way to purge all Mail Preferences, and start over, but I am wondering if you have any messages stuck in the Outbox, and those may reference previously entered SMTP? Do you have any messages awaiting sending, or have you only tried with newly composed messages, after the change in SMTP entries?
    Ernie

  • Balance display with minor incorrect entry

    hi,
    in fs10n or fk10n or fd10n, i would like to clarify this.
    when i double click credit, it should show only credit balance but i still able to see there are few lines of debit balance. likewise also happen for debit balance where there are few lines with credit.
    say out of 100 lines, there are about 3 lines with opposite. meaning if double click debit, 3 lines with credit.
    may i know why?
    thanks

    Hi,
          If you are Putting this question  in an End User Point of view then there is no need to worry as the Auditors who knows SAP will understand it properly since it is a presentation rather than impact that you can check it out with the figures.
    REASON
    The transaction figures on the original side of the account are reset again rather than being increased on the other side of the account when documents are reversed because of configuration setting in company code global settings ie Negative posting permitted
    The use of this indicator in the configuration is
    If you have set this indicator, then the account balance of the account in question is represented as though the document had never been posted after the document is reversed. Otherwise the transaction figures of the account would be increased by the same amount on the debit and on the credit side due to the document and the reversal document.
    Absolutely No Problem with this presentation .
    Thanks and regards
    Sunil

  • Incorrect entries in Stock/requirements list

    Hi,
    I have the following issues:
    1) The sales orders are not reflected in MD04.
    I understand this is the result of SD transactions not properly updating the 'sales requirements' tables VBBE & VBBS. MRP is relying on this information.
    Why SD transactions not properly updating the Sales requirements tables VBBE & VBBS?
    2) The system is not reducing the sales order qty by the outbound delivered qty.
         Example:       Sales order qty : 100 PCu2019s
              Outbound delivered qty: 50 PCu2019s      
              Sales order qty in MD04 should be 50 PCu2019s. But this is not so in some cases.     
    Why system is not reducing the sales order qty by the outbound delivered qty?
    For issue 1 & 2 , The program SDRQCR21 is used to correct the entries.
    3) Some times , the program gets cancelled due to ABAP runtime error : SAPSQL_ARRAY_INSERT_DUPREC .
    The reason is One sales document number is entered twice in table VBBE during the program SDRQCR21 execution.
    How to Correct the above issue?
    Regards,
    Prasad

    Hi Anil,
    Plz find the Karthick & Navin inputs which is very clear to understand abt Rescheduling
    Let us have a final material xxxx.
    It needs a material(procured) yyyy.
    let the planned del.time of yyyy be 20 days.
    and assume there is no stock of yyyy in the plant.
    You need XXXX ,10 days later from today.
    So if the requirement for xxxx is raised today , System wud raise a Pur req for yyyy.
    The actual date on which yyyy can be available in the plant is 20 days from today( i.e what we call as Planned del.time). But as the requirement 10 days in advance, the system itself will reschedule the date.( for making yyyy available ready for xxxx)..
    Example
    Say I have a VSF requirement for 26.01.09 & Next element is Production Order with Finish date as 09.03.2009. In between this no other requirements are existing.
    In above case in the Production Order line system will give the rescheduling date 26.01.09. This means i need to bring my process forward to get it completed on 26.01.09.
    The conclusion is if any elements in the MD04 needs to be rescheduled to fufil the requirement then system will give the rescheduling date.
    Regards
    kumar
    Edited by: kumar kumar on Jun 22, 2009 4:57 PM

  • Mass delete incorrect entries in TimeEvent table

    Hi All
    Please if any body can help out, we have an interface for uploading time entires (time IN and time out) into SAP. By mistake some wrong entries are uploaded in the system, we can delete entries one by one using PA61 list entry. but is there any way of mass deleting these entries for all the relevant employees for infotype 2011 (timeevent table).
    Thanks for your help in advance
    C

    Hi C,
    should you not have authorisation to use &sap_edit,please use debugger and please find the steps below
    1. SE11->Data dictionary ->
    2. Choose the table entry
    3. After choosing the table entry ,enter /h and press enter  to start the debugger session(debugger switched on) message will populate in the status bar. after you enter /h and message gets populated, press enter one more time
    4.place a breakpoint in end form.to place breakpoint,just double click and red button pops up near the line .to remove just double click or shift+f2
    5.now double click on the line which says code=show and it will move to the variable on the right hand side
    6.now click on the pencil and icon will change to view
    7.now if you want to insert choose INSR or DELE based on what you are trying to do with table entries.i m trying to insert values.
    8.now click f8
    And you wll be able to do the amendments
    http://www.blogger.com/posts.g?blogID=851689076743960139&searchType=ALL&page=1
    hope it helps
    No Worries
    KG
    Edited by: SAPenjoy:) on Aug 29, 2010 12:59 PM

Maybe you are looking for