Incorrect flow type and profit center missing in FAGLL03 and FBL3N
After finished a transaction CJ88 ,when we use the transaction FAGLL03 for an associated GL account, profit center goes blank in the screen. In CJ20n also the correct profit center associated with the WB element is shown but it's missing in fbl3n and fagll03. Could you please provide help?
Hi JPA,
All the details that you are asking about is attached in the screen-shots provided 'inheritance_document splitting'. I am also providing you screen shots regarding the problem for a better ease of analysis. Here 'cj20n_example' shows the profit center associated during project buildup and the screen shot 'FAGLL03_example' shows the issue due to which the profit center field for the same WBS element is shown blank.
Regards,
Somak Biswas.
inheritance_document splitting:
cj20n_example:
FAGLL03_example:
Similar Messages
-
Profit Center missing in FAGLFLEXT and FAGLFLEXA
Hi All,
I am trying to download FAGLFLEXT data via SE16, and realized that the profit center is blank, although it appeared in the document display (FAGLB03). The same thing also happen to FAGLFLEXA.
Is this a normal behavior or it is because of missing configuration?
If it's a normal behavior, can please advice which table i can use to find the profit center so that i can join the two tables together after download to excel?
Thanks,
LiamHi Christian and SDNer,
Thanks for the response.
Forgot to tell that FIN_PCA was not activated.
Hi SDNer,
Yes, i think now i can join FAGLFLEXT with BSEG to get the profit center.
Thanks to you both!!,
Liam -
Cost Center and Profit Center in Sales Order and Deliveries.
What are the different methods of determining cost centers and Profit centers in Sales orders ?
Can Cost Center be determined independently in sales order or will be detrmined from Profit center ?Hi Sunil
Profit Centres are used primarily in S&D (at billing stage it is transferred to FI) for registering revenue.
Billing -
Integration Points Module
Debit A/R - FI/ CO
Credit Revenue - FI/ CO
Updates G/ L - FI/ CO
(Tax, discounts, surcharges, etc.)
Return Delivery & Credit Memo -
Integration Points Module
Increases Inventory - MM
Updates G/ L - FI
Credit Memo - FI
Adjustment to A/R - FI
Reduces Revenue - FI
Profit Centers can be set-up to identify product lines, divisions, geographical regions, offices, production sites or by functions. Profit Centers are used for Internal Control purposes enabling management the ability to review areas of responsibility within their organization.
The difference between a Cost Center and a Profit Center is that the Cost Center represents individual costs incurred during a given period and Profit Centers contain the balances of costs and revenues.
Regards -
Changing cost center and profit center in already exsisting PR and PO
Hi friends,
In my ckient place we have created PR with account assignments- K,C,D,A and saved the pr. We are creating PO woth respect PR. then we did goods reciept also and some went upto to the stage of invoice verification. now my client likes to change the cost center and profit center they are using currently. they are interested to create new profit center and cost center.will this chnage will affect the already exsisting open PO(purchasing process not yet completed).
Is it possible to change the cost center and profit center in already exsisting and created PO and purchase request. will sap allow this.what can we do.please advice.
Thanks you in advance.
Regards,
willaimWilliam,
Once you will post the GR or Invoice system will not allow to change the account assignment data like Cost Center or profit center.
This is a standard SAP functionality -
WBS, Business Area and Profit Center not flowing in GR/IR Account
Hello Experts,
I have come across a very strange situation. I have two MIGO documents which are showing different posting characteristics:
1) FI Document 5000000553
In this document, the Business area and profit center is flowing in GR/IR Clearing Account (15660000) but WBS element is not flowing to this line item.
Screen shot is as follows:-
As you can see from the above screen shot that, for GR/IR Account 15660000. Only Business Area and Profit Center are flowing and WBS Element is not coming.
2. FI Document 5000015602
In this document, the WBS element is going in GR/IR Clearing Account (15660000) but Business area and profit center is not flowing to this line item
Screen Shot is as follows:-
From the above screen shot, Business Area and Profit Center are not flowing but WBS Element is coming.
Could you please let me know what could be the possible reason for this behavior of both the documents.?
Regards,
AmitHi Saurabh,
Its great to see your reply. Yes, I know that currencies and posting dates are different. But that's the way it is. One document is for fiscal year 2014 and other is for 2013. There is nothing related to currency and posting date which was causing the strange behavior of the system.
However, our team analyzed the issue and found that only for service material having a special valuation type related to services is causing the problem and still we are diagnosing the other possible root cause as well.
Thanks for your co-operation and suggestion.
Regards,
Amit -
Profit center missing from report FAGLL03
We have posted several intercompany documents and when we view the documents using t code FAGLL03, for the automatically generated line items (intercompany accounts) the profit center is blank.
For example we posted
In company A
Dr. expense 1000
Cr. company B -1000
In company B
Dr. company A 1000
Cr. Vendor 1000
For the accounts that are intercompany accounts for company A & B, in FAGLL03, the amounts are showing up as
Dr. 2000 Profit center missing
Cr. 1000 Profit center ABCD
(net is correct as its 1000), but how is SAP coming up with 2000 & 1000 just for FAGLL03? For FBL3n it appears correctly. I know that SAP is splitting by profit center but why is the profit center blank for 2000?
please help& thanks
Briandocument splitting issue
-
Error with Business area and profit center
Hello Guru's,
I have an issue when posting the stock through t-code MB1C and 521 movement type. We have assigned business area and profit centers for plants as below:
For Plant 1000,
Business Area: 1100
Profit center: 1100
And For Plant 2000,
Business Area: 1200
Profit center: 1200
But when I am assigning plant 2000, and assigning business area and profit center as 1200 respectively. System by default is picking as 1100 with a warning message.
Please help this resolving this issue, I want the system to take the correct assigned BA and Profit center.
Regards,
Varun SiddharthHi Varun,
One of the possible ways is, to assign a business area to the cobination of Plant and Division in OMJ7 (Assignment is possible for other combinations as well). Later you can define a substitution rule so that, a profit center is substituted to the combination of Plant and Business Area.
Hope it helps you.
Regards,
Ravi Kumar -
Business area and profit center
plz can anyone explain me what is the diffrence between business area and profit center.
Business Area is a type of organizational unit structure, primarily used to facilitate external segment reporting across company codes, covering the company's main areas of operation. Business Areas run across company codes. The relationship is n:n. Business Area is part of FI.
Profit Center is also a type of organization unit structure, used for management/ internal controlling purposes. Dividing the company up into profit centers allows one to analyze areas of responsibility and to delegate responsibility to decentralized units, thus treating them as companies within the company. The profit centers also run across company codes. The relationship is n:n. Profit Center Accounting is part of Enterprise Controlling.
While it may look apprantly that both Business Area and Profit Center do the same kind of analysis and reporting, with in SAP internal architecture they are kept in different modules and different tables.
SAP Note 321190 provides the difference betwen Business Area and Profit Center, which you can get from SAP Service Market place.
SAP has maintained Business Area from 4.6B onwards, while there are enhancements happening in Profit Center side. -
Material doc, accounting doc, and profit center doc in vl03n
Hi All,
In VL03N how can i see Material doc, Accounting doc, and Profit Center doc.
thanks in advance,
kumar.yes he meant the exact same thing which you have understood my friend, you can have any sales document number with you f& rom that you can trace all the documents relavant to that, say you have inquiry which lead to quotation then to order, delivery, invoice & finally the accounting document so by simply entering VA13 you will get the inquiry display screen where you enter your inquiry number & click on the document flow, you will get all the details which i just mentioned, double click on the particular document number which you want to see in details
Reward Points if it helps
Regards,
N -
Cost Center and Profit Center Planning
Hi,
I have one Co issue. Pls Suggest me the wiseful solution.
Cost Center and Profit Center Planning.
For F-2008 Planning data they have updated in the month of Aug, 07 for Profit and Loss Items and they have revised the plan data of some cost elements in the month of oct, 2007 (say 5% Increas). when comparing the cost center report to profit center report, both are not matching. the reason when i see and reconcile the document nos and values in between cost center and profit center reports i found out that there are some documents are missing in the profit center report.
wherever plan data had revised e.g for cost element Salaries they have updated 100000 Planning cost in the month of Aug, 07. In the month of Oct, 07 increased 5% i.e.5000. In cost center line items details i found 2 documents for Rs.100000/- and Rs.5000/- But in Profit Center Line Items i am getting only Rs.5000/- Value Document.
Note. As and when KP06 Plan data has been updated Profit Center line items are generating. It is not necessary to run any programme inorder to transfer Plan Data from cost center to profit center.
Observations From My Side:-
I tried to run the transaction code 1ke0. i have selected the cost object is Cost Center, version and had given Cost Center Parameter in development and quality clients and executed the same.By this time already existing data either deleting/ riversing and creating new documents fully except manually changed data in profit center through 7ke1.
My Question is
1.Upto what extent it will work.
2.will it be possible to transfer data from cost center to profit center only missing documents which are available in cost center, without disturbing of existing data in profit center.
3.suppose if i done this activity, there are some data which was already transferred from other cost objects like internatl orders & wbs elements to Profit Center. will the data get disturbed (deleted/riversed).
Pls suggest me the wiseful way to solve theHi
Try This
BAPI_COSTCENTER_CREATEMULTIPLE
BAPI_COSTCENTERGROUP_CREATE
BAPI_PROFITCENTER_CREATE
BAPI_PROFITCENTERGRP_CREATE.
Regards,
V.balaji
Reward if usefull -
Dear CO Gurus,
I have a scenario as described below.
The semifinished material is manufactured in first work center/cost center. The Finished product is produced in second
work center/cost center and consumes the semifinished product manufactured in the first cost center.
The same semifinished material also sold directly to customer from the same plant. Now both the cost centers are under one plant. Is it possible to have separate cost and revenue reports for this two materials ( semifinished and finished product), two cost centers.
Or is it necessary to divide the single plant having this two cost centers into two individual plants. If we split the plant into two, then the semifinished material will be issued to finished product as a stock transfer from plant 1 to plant 2. Customer do not want to do every time stock transfer orders.
So is it possible to have single plant and 2 different cost center for the semifinished and finished product manufacturing .And can we take separate cost and revenue reports without splitting the plants.
Thanks and regards
MurugesanHi,
You have to split your issue into two parts i.e one is workcenter/cost center combination to capture activities costs and other one is Plant and profit center combination to have report.
U can have different cost centers for both semi finished and finished products to calculate the activity types in the same plant. U define separately the activity cost for each cost center and activity type and assign the same in the respective workcenters of the products.
If each plant is created as a profit center, one option is to assign the same profit center for both the products and taking the report on profit center with material as a sort field, which will give the desired report.
Another option is to create two different profit centers for these products and assign in the material master for material and plant combination as Semi Finished and Finished goods are going to be different material codes.
Regards
Sudahkar Reddy -
Vendor Ageing Report Business Area and Profit Center wise
Dear Experts,
I have a requirement where user wants a Report for Vendor Ageing Business Area and Profit Center wise.I checked Standard T Codes but the same were Business Area wise but i could'nt find Profit Center wise Report.If their is any standard functionality then please advice.
We are using SAP ECC 6.0 Classic GL with Spl Purpose Ledger active.Can someone please advice can i derive such a report through Report Painter.If possible please advice in details.
Your Valuable inputs shall be appreciated....
Regards
RahulHi Durga,
Can you please elaborate further on the same how you are determining the Report in FBL1N.What are the prerequisited to be taken care of and some further details on the same.
My Bus Area is not as same as Profit Center eg
BA PC
FXRT RT0001 / 2 / 3
TMMG TM0001/ 2 / 3
LTOB LO0001/ 2 / 3
I checked in my system but we do not have the Program for the following T Codes
S_PCO_36000218 - Segment Receivables
S_PCO_36000219 - Segment Payables
S_AC0_52000887 - Profit Center Receivables
S_AC0_52000888 - Profit Center Payables
Regards
Rahul -
Report painter, Internal orders and profit center accounting
hi,
I want to do a report using data from internals orders (AUFNR) and profit center accounting (PRCTR).
I can make individual reports for internals orders (6O1, CCSS) and for profit center accounting (8a2, GPLCA) but I can't combinate data from internals orders and profit center accounting.
Is it possible make a report using report painter that show data of internals orders and profit center accounting.
All my internals orders have a profit center accounting.
Thanks in avanced[url] http://help.sap.com/saphelp_45b/helpdata/en/cc/36428394f311d2b47a006094b9b0a5/frameset.htm
this may be helpful
regards.
santhosh reddy -
Std report to dispaly Sales Order and Profit center data
Hi,
I want to display list of Sales Order and profit center in one report for that Sales organisation
Is there any T-code where i can view Sales Order and its Profit center.
**Plz if anyone knows abt this reply soon.
Thanks
AKASH
Edited by: AKASH TAMBI on May 20, 2008 1:28 PMDear Akash
There is no standard report to see both the sale order reference and profit center. However, if you go to SE16 and use table VBAP, you can see the required details
thanks
G. Lakshmipathi -
Report Needed to show WBS and Profit Center on Invoices
I need a report of open and cleared invoices that show the WBS and Profit Center.
I have tried the FBL5N and it doesn't populate it. Any other reports out there???You dont have to join them. Keep both profit center and cost centre in the cube. While defining the update rules, derive profit center from cot centre.
In the report , keep profit center and cost centre as free char.
The users can dynamically drill down and view the report for cost centre or profit centre or both.
Another idea is to keep profit centre as a nav attribute in the cube and in that case, you dont have to derive profit centre from cost centre in the update rules.
Ravi Thotahdri
Maybe you are looking for
-
Getting a runtime error when using a standard Form Interface
I am getting this Error analysis: The following syntax error was found in the program /1BCDWB/SAPLSM00000212 : "Field "VBRK-WAERK" is unknown. It is neither in one of the specified t" "ables nor defined by a "DATA" statement. ." The problem is, I am
-
Problems using 100% to scale movie
hi guys, ive embedded my flash 8 movie using some swfobject script. ive made the movie 1024px X 768px but set the html values to 100% as there will be a fullscreen option. everytime i test the page my movie just appears in the top left of the screen
-
I have two instances os SAP R/3, which one with one Content Server I have also the SAP Portals connect to DMS using SAP DMS Connector In the portal, through content management, I can see the originals files sotred in the Content Server. Buuut, using
-
No Signal Loss When Plugged In
Like many, I have suffered from the dropped bars while holding my phone the way most people do. I tried something last night and for some reason when I pick up my phone with my left hand when it's plugged into the power outlet not one bar drops. Mayb
-
Epson Perfection 1650 Scanner won't work with 10.7.5, help?
I am trying to use my EPSON PERFECTION 1650 scanner with my MacBook Pro, software version 10.7.5. The old driver does not work with Lion. I ran software update, with the scanner connected, and it did not come up with any new Epson software to insta