Incorrect GR values while reversal

Hi,
For the PO, GR and IR is also done.Meantime user wants to reverse so he has
created a credit memo and reversed GR with 102.
MR11 GR/IR Clearing record also exists for cleared  difference for the same.
So the user again trying to repost the GR but the value og GR not matching
the original GR value.
Pls suggest

Hi,
The price is standard price control.But when i reverse 2 or 3 time it is getting posted for the same GR value.
But why these fluctuations.
Is it due to the existing MR11 clearence or else any deviation in behaviour.
Pls suggest

Similar Messages

  • Accounting document incorrect while reversing

    All,
    Please see the statistics at the bottom  . This is copied and pasted from Pur Order history .
    A PO created for 98000kg with unit price 1542 USD .
    Then made the GR(5000000016) for 1975 kg and next GR (5000000017) for 96410 KG . Then user understood his mistake , PO shud be of 1542 price per 1000 unit .
    He changed the price per unit to 1000 .
    Now cancelled GR(5000000017) ie for 96410 kg and you can see the accounting which is exactly reversed (5000000113) .
    Now again done GR(5000000114) for 96410kg and accounting was perfect as you can observe .
    Then reversed 5000000016 ie for 1975kg  and generated new document number (5000000115) and amount is not fully reversed .
    After that done GR for 1975kg (5000000116) and amount credited to GR/IR was 3045.45 which was perfect as you can observe below .
    Now there is a mismatch of amount which generated while reversing 5000000016.
    Anybody experienced this case before ? Can anybody pls tell me the reason for this and how I can correct this ? Pls treat this as very urgent .
    101     5000000116  03.06.2007 1,975    KG    3,045.45             USD
    102     5000000115  03.06.2007 1,975-   KG    64,119.28-          USD
    101     5000000114  03.06.2007  96,410      KG   148,664.22          USD
    102     5000000113  03.06.2007  96,410- KG   148,664,220.00-  USD
    101     5000000017  03.06.2007  96,410      KG   148,664,220.00       USD
    101     5000000016  03.06.2007  1,975      KG   3045450.00       USD
    Tr./Ev. Goods receipt               98,385       KG   3,133.040.39       USD

    Hi Steve
    My mind is not working (it seems) i hope u can bear me for little more:
    i'll tell u the scenario....i understood perfectly that new price should be picked up by the system but query is how it calculated it..
    i have done the PVS scenario taking simple figures:
    1) PO created for qty 100 , price entered in PO 100.
    2) GR for qty 15, total amount came 1500.
    3) GR for qty 85, total amount came 8500.
    4) PO changed (OUN from 1 to 1000).
    5) GR cancel qty 85 (ref step 3 doc) amount came 8500-.
    6) GR for qty 85 amount came 8.50(as unit changed from 1 to 1000). till here it is perfect.
    7) GR cancel qty 15 (ref step 1 doc) amount came 226.28-?
    Now how this 226.28 has arrived?
    I hope query is clear to you..
    regards
    Yogesh

  • Incorrect initial value for characteristic 0fiscyear in i_t_range

    Hi,
    While extracting the data from the source DSO to Target I got an error message like '' Incorrect initial value for characteristic 0fiscyear in i_t_range".
    what is the step should i take to resolve this?
    Thanks in Advance.

    Gurus
    I have the same problem with my ABAP code written in DTP filter.
    Can anyone please help what needs to be done , I am getting this error when I try to load the data to cube.

  • Note 951952 - Incorrect excise values if batch split in MIGO for import PO

    Dear participants,
    We have applied Note 951952 - Incorrect excise values if batch split in MIGO for import PO,
    for following issue,
    While doing import goods receipt for batch split quantity,
    excise base value is calculating for entire amount not by splitted quantity.
    We are unable to solve this issue.
    We are using SAP ECC release 6.0 level 11 whether above mentioned note can be applied or else any other
    new notes to apply solve this issue.
    Advance thanks
    Regards,
    A.Jeyakanthan

    Thanks for reply,will check note is applicable for current package level.
    Actually we found excise base value is same for GR of batch split quantities for same material
    with valuation type import duty free.

  • BUG: Info panel displays incorrect Hue values

    Recently, I've been doing a lot of work with color in Fireworks and came across the following bug, which appears to be a longstanding issue within the application. Rather than keeping it to myself, I figured I'd post it here in addition to submitting a bug report with Adobe. So here it is...
    Hue values displayed within the Info panel (in HSB mode) do not consistently match the values displayed in the Color Mixer panel—including basic colors such as pure Yellow, Cyan, and Magenta. The values are 1 degree off—most often below the Color Mixer value, but sometimes above (as with Magenta). This holds true whether using with the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
    For example, the following inconsistencies were observed when sampling the centermost horizontal strip within CS6's default Color Cubes swatches picker. Note that over 50% of these colors are affected by the issue.
    The Color Mixer seems to display the correct values, while the Info panel's values appear to be incorrect. Note that this issue affects the HSB mode only; the RGB and Hex values are consistent between both panels.
    This bug has been observed in Fireworks CS6, Fireworks CS5.1 and Fireworks 8 on Mac OS 10.6.8 (Snow Leopard).
    Here's the bug report submitted for this issue:
    Product name: Fireworks
    Product Version: 12.0.0.236
    Product Language: English
    Your operating system: Mac OS 10.6.8 (Intel-based)
    ******BUG******
    Concise problem statement: The Info panel displays incorrect Hue values for many colors—including pure Yellow, Cyan, and Magenta. The Hue values are usually 1 degree below the value displayed in the Color Mixer panel (e.g., 59 instead of 60 for Yellow) but sometimes 1 degree above (e.g., 301 instead of 300 for Magenta). This is true whether using the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
    Steps to reproduce bug:
    In an open Fireworks document, open the Info, Color Mixer, and Swatches panels. Within the Color Mixer and Info panels, set the color mode to HSB.
    Draw a Rectangle and set its fill to Yellow (#FFFF00) using the Color Picker.
    Observe the Hue values displayed in the Color Mixer and Info panels.
    Select the Eyedropper (I) tool, and sample the rectangle's fill color. Again, observe the Hue values displayed in both the Color Mixer and Info panels.
    Results: In both steps 3 and 4, the Hue value for pure Yellow (#ffff00) appears as 60 degrees in the Color Mixer panel but 59 degrees in the Info panel.
    Expected results: The Hue for pure Yellow (#ffff00) should appear as 60 degrees in both panels.
    Note that this issue affects the Info panel's HSB mode only; the RGB and Hex values are consistent between panels. Also note that this bug affects over 50% of the "pure" hues within CS6's Color Cubes swatches palette. For more info, see the following forum post:
    http://forums.adobe.com/thread/1083391
    This bug has been observed in Fireworks CS6, CS5.1 and FW8 on Mac OS 10.6.8 (Snow Leopard).

    I haven't done anything other than add my footage to the timeline. I have 2 layers (1 targa seq and 1 png seq). As I move my mouse from the Timeline to the Comp Panel, the color values flash for a split second and go away. If I press Opt+1 (2, 3, and 4) the Info Panel displays the color for that one pixel but the values go blank as soon as I move my mouse. This happens in the Comp Panel mostly. If I open a Footage or Layer Panel, sometimes the values show, sometimes not. Never had this issue in previous versions.

  • Problem while reversing ARE1 Document

    Hi All,
    I am encountering  the error as per the screenshot attached.
    I have checked all settings and it is ok eg.ETT-Account Determination and the GL is also present.
    I hv gone through the notes mentioned in earlier posts but I don't think it will help me in resolving this issue.
    Please someone help me.

    I hv gone through the notes mentioned in earlier posts but I don't think it will help me in resolving this issue.
    Whenever you post a query and expecting some assistance from SCN, please ensure that you communicate with clarity so that we dont waste our time to give the same suggestion.  Spell out which threads and notes you have gone through.  Most importantly, please please at any cost, dont conclude to your yourself that whatever inputs you have gone through will not help you. 
    Since you have indicated that you have gone through couple of notes, I am not sure, whether you have gone through this note
    Note 1061243 - Incorrect Balance checking while ARE1-Reversal
    G. Lakshmipathi

  • Feature NUMAP was called with incorrect parameter value PME15

    hi
    i am getting following error while running transaction pb10.
    Feature NUMAP was called with incorrect parameter value PME15
    please help me out.
    regards
    archana

    this might be occur in case there is mismatch of the fields of decision being used in feature maintenance.
    check the feature and the return value , wether the return value is correct or not
    goto PE03->NUMAP check the return value  and check wether the return was configured in number ranges
    eg: if the return value is 01 go to your config and check the number range has been set for "01"
    you gave return value as "01" and the number range has not been set in configuaration for "01" this kind of error s may occur.
    Edited by: Piscian . on Jul 18, 2011 11:54 AM

  • Incorrect initial value for char 0FISCYEAR in i_t_range in DTP filter prog

    Gurus
    I need your help , I have searched all the threads but could not find anything which can help me resolve this issue.
    I have a filter in DTP as a routine to get the year from system date.
    The program is correct for syntex but when I trigger the DTP I am getting the following message , not sure what needs to be added to my programe.
    Incorrect initial value for characteristic 0FISCYEAR in i_t_range
    Message no. DBMAN889
    appreciate any help I can get to reoslve this ASAP.
    Thanks in advance

    Hi
    Pleae check if you have initialised with a NULL value . "blank/null" is indeed not a valid characteristic value for fiscal period. Fisc.per is of type NUMC which means all characters have to be numerical. The initial value should be "0000000" .
    Thanks,
    Rajesh.
    Please provide points to answers if you find them helpful

  • Incorrect data value selected when clicking on slicer entry in Excel Services

    We have uploaded various Excel 2013 files containing pivot tables to Sharepoint 2013 and viewed the pivot tables in a browser. The referenced pivot table data is normally a SSAS tabular model. This has been working fine for over 12 months apart
    from one irritating feature.
    Sometimes a clicked slicer entry does not result in the correct slicer value being selected. This typically occurs after using the mouse scroll button to scroll down a list of entries in a slicer. When using the keyboard arrow keys to highlight a slicer
    value and pressing Return to select an entry, the correct value does always seem to be selected - so it appears to point to a mouse scrollwheel issue. Also, after scrolling through slicer entries using the mouse scroll wheel, there appears to be some sort
    of slicer refresh problem that results in a blank entry/entries being displayed either at the top or bottom of a slicer. However, sometimes the correct 'tooltip' is shown for this blank slicer entry. One other point - when using the slicer scrollbar the scroll
    down a list of slicer entries using Firefox, the problem does not seem to occur. IE does not seem to display the same type of slicer scrollbars (only active when the mouse hovers over the slicer) and so this is more difficult to replicate in Ie.
    The worrying factor is that the user is often unaware that the incorrect slicer value has been selected. The problem can be replicated in both IE11 and Firefox. Also our client systems accessed via Citrix display the same problems.
    Any help greatly appreciated. Thanks.
    Graham Goodwin Email: [email protected]

    Hi Graham,
    i built the same version, please correct me if should your environment, is sharepoint 2013 with march 2013 update and your office also the same update. in my labbox seems the issue is not re-producible.
    after some discussion with my colleague, seems there was issue similar like this back in 2010 Excel and the remedy is to update the excel services and to re-install the power pivot at SQL server. back then the issue is because when we scroll the selection,
    it should be locked, so then when we scroll it may have the position to update and refresh the data. one of the workaround is by clicking the item and press enter, by doing this it will refresh the page correctly. the link was:http://www.microsoft.com/en-us/download/details.aspx?id=29074
    i tried to look at our update for the excel services 2013, there are updates in every cumulative updates but there is no particlular update regarding this issue, perhaps you may try this to check in your development environment, if should it may fix the
    issue.
    to re-install the power pivot, you may need to do this on your sql side.　
    http://technet.microsoft.com/en-us/library/ee210708.aspx
    http://technet.microsoft.com/en-us/library/ee210671.aspxi may suggest you to check the ULS log, if should there are issues with powerpivot also, to make sure if should there are no issue
    regarding power pivot. if there is no issues on the powerpivot, then you may need to open a ticket to report this issue, so that we can have a detailed checking to your environment remotely.
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • "The movie contains an incorrect time value" error - saving a trimmed video

    I am attempting to trim a video shot on my Samsung CL65. The video was shot in High Quality HD 1280 x 720. I open the video in QuickTime and then use the Trim command to remove the last part of the video and then close it to Save it. When I save it I get the following error: "The document SAM_0306.MP4 could not be saved as "SAM_0306". The movie contains an incorrect time value." I think this has to do with an encoding error in the original file or in the trimmed file but I have no idea how to get around it.
    Any ideas?

    This info probably won't help with your problem, but it's information for others who get this error.
    It's probably the software that made the MP4. ffmpegX, for example, and the mencoder program inside it, do this with every H264 encoding when the video is longer than 1 hour. Time codes are correct up to 1 hour, then the seconds value gets wacky (3600 is added to it). Quicktime won't save a movie with a time code like 1:20:3623.120 (although it will correctly display 1:20:23 in the player).
    Apple used to offer quicktime scripts that would allow you to see what the time code in a stream really looked like. Applescript appears to have officially and quietly gone missing, though, and those scripts are no longer available online as far as I can tell. There were some really handy other scripts that would allow you to view all sorts of movie properties and manipulate tracks (great for syncing poorly synced sound, for example), but time code problems like the above would invariably mean the movie couldn't be saved.

  • Error while reversing mat document

    Dear all,
    While reversing material document i am getting error as "Reverse the availed CENVAT credit before cancelling excise invoice."
    How i should proceed?
    Naren
    Edited by: Narendra Khedekar on Oct 5, 2010 10:50 AM

    Hi,
    Cancellation of excise invoice process as below.
    1) Cancel the material document in MIGO
    2) Post the excise invoice in J1IEX
    3) Cancel the excise invoice in J1IEX
    4) Perform MIGO again if required.
    If try to cancel without canceling GR documents through J1IEX or J1IH (CANCEL OPTION) you will get an error as Excise invoice has been  already posted
    Cancel GR document
    Post excise invoice - J1IEX while posting under miscellaneous tab enter Rej code 0001
    Cancel Excise invoice u2013J1IEX
    Cross check the entries in J2I9 - You can see credit entry which were already taken credit & the second entry of cancelled/reversed. Hope this helps you.

  • Error while reversing data from SQL Server to ODI

    hi,
    I was reversing data from SQL Server Java 1.6_022 in ODI Java 1.5, I was getting error Version Mismatch and I updated ODI Java version to 1.6_022.
    And now, I am getting the below error while reversing the data from SQL Server database.
    0 : 08001 : java.sql.SQLException: No suitable driver
    Looking for the assistance on the same.
    Thanks,
    Abhay

    If everything is fine the reversing should be fine. I would say check again if the Technology of the Model and the also the dataserver is created under the right Technology in topology too.
    also if this doesn't help , Please tell us the steps you have carried so far . Also can you try selective reverse is it showing the tables.

  • Number Generation Failure While Reversing Sub. Challan

    hi all,
    While reversing the sub contracting Challan, I am getting this Error "Number Generation Failure". Kindly guide where to maintain the Number range & Object.
    regards
    Dhinakar

    Hi Jeyakanthan,
    Thanks for your response
    I maintaned number range for object : J_1i57c in T.cde j1i9....
    still it is showing the same error.....
    hope to hear back from you......
    Thanks&Regards,
    Chand

  • How to get default values while using the transaction "BP"

    Hi Group,
    I have a query on how to get default values while using the transaction <b>BP</b>?
    The thing is:
    when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
    how can I achieve this?
    So please kindly let me know the procedure to achieve this.
    Thanks & Regards,
    Vishnu.

    Hi,
    The events of BDT can be used to default some fields on creating a partner.
    For this create a function module for ISDAT. attach that event in BUS7.
    In the ISDAT funtion modulethe following code should be used.
    For example to set the nationality:
    I_BUSDEFAULT-NATIO = 'DE.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
    i_busdefault = I_BUSDEFAULT
    Regards, Smita.

  • Issue while Reverse Engineering the HFM Application

    Hi,
    We are in the process of integrating HFM (11.1.2.2.0) with ODI (11.1.1.6) for metadata upload from ODI to HFM, and, I am getting the following error while reverse engineering to the HFM application.
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (most recent call last):
    File "<string>", line 38, in <module>
         at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
         at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
         at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
         at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: Traceback (most recent call last):
    File "<string>", line 38, in <module>
         at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
         at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
         at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
         at org.python.core.PyException.fillInStackTrace(PyException.java:70)
         at java.lang.Throwable.<init>(Throwable.java:181)
         at java.lang.Exception.<init>(Exception.java:29)
         at java.lang.RuntimeException.<init>(RuntimeException.java:32)
         at org.python.core.PyException.<init>(PyException.java:46)
         at org.python.core.PyException.<init>(PyException.java:43)
         at org.python.core.Py.JavaError(Py.java:455)
         at org.python.core.Py.JavaError(Py.java:448)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
         at org.python.core.PyObject.__call__(PyObject.java:355)
         at org.python.core.PyMethod.__call__(PyMethod.java:215)
         at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
         at org.python.core.PyMethod.__call__(PyMethod.java:206)
         at org.python.core.PyObject.__call__(PyObject.java:381)
         at org.python.core.PyObject.__call__(PyObject.java:385)
         at org.python.pycode._pyx0.f$0(<string>:38)
         at org.python.pycode._pyx0.call_function(<string>)
         at org.python.core.PyTableCode.call(PyTableCode.java:165)
         at org.python.core.PyCode.call(PyCode.java:18)
         at org.python.core.Py.runCode(Py.java:1204)
         at org.python.core.Py.exec(Py.java:1248)
         at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
         ... 19 more
    Caused by: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
         at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
         at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
         at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
         ... 33 more
    Caused by: com.hyperion.odi.hfm.wrapper.HFMException: Error occurred while loading driver.
         at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:29)
         at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:51)
         ... 40 more
    Caused by: com.hyperion.odi.hfm.wrapper.HFMException: C:\Oracle\Middleware\Oracle_ODI1\oracledi\agent\drivers\HFMDriver.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
         at com.hyperion.odi.hfm.wrapper.HFMDriverJNI.getDriver(HFMDriverJNI.java:23)
         at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:26)
         ... 41 more
    Can anyone please suggest a suitable solution for this?
    Thanks
    Abhi

    Hi,
    Under the readme eRPI : http://docs.oracle.com/cd/E17236_01/epm.1112/readme/erpi_1112200_readme.html
    I find this :
    ODI Setup Steps to Integrate with Financial Management
    To setup the ODI to integrate with Financial Management:
    Rename odiparams.bat located at <ODI_HOME>\oracledi\agent\bin to odiparams.bat.backup.
    The default installation location is C:\app\Oracle\product\11.1.1\Oracle_ODI_1.
    Download Oracle Data Integrator Companion CD 11.1.1.6.2.
    Unzip the contents of the Companion CD to the temp directory.
    Unzip oracledi-agent-standalone.zip.
    Copy the contents to: <ODI_HOME>.
    Make a backup of the HFMDriver.DLL.
    For the 32 bit operating system, copy HFMDriver32_11.1.2.2.dll as HFMDriver.DLL.
    For the 64bit operating system, copy HFMDriver64_11.1.2.2.dll as HFMDriver.DLL.
    Rename odiparams.bat.backup from Step 1 to odiparams.
    Edit the PATH to include: <ODI_HOME>\oracledi.sdk\lib
    Restart the ODI Agent.
    I try this procedure, but now, I have a new error :
    - Unable to connect on "myhfmserver" with "admin" user
    I think that, there is another step to do, because now HFM 11.1.2.2 use directly the "EPM Registry" (into Shared Services Schema) to retreive the HFM servers ou Clusters.
    But I don't find any information, how to setup this part into ODI.
    Or may be, we need to setup "Regedit Keys" into Windows registry like previous HFM release ?
    If you have any news, please inform me

Maybe you are looking for