INCORRECT INFORMATION ON 6230i

Hi all 6230i users.
I would like to point out to anyone who thinks they know what they are talking about concerning the nokia 6230i handset to please have thier facts CORRECT before posting any comments on this forum.
Updating handsets using NSU is not dependant on the dct version regardless of what or who has stated to them.
Updates for 6230i and most other handsets are at the moment being developed and tested for release and will not require anything other than the required data cable or plenty of credit if the handset is to be updated over the air (ota).
I too wait for a firmware/software for the 6230i and refuse to pay for it at any service centre as I have paid more than enough for this handset and see that I shouldnt need to pay for nokias problems..
SO PLEASE PLEASE PLEASE EVERYONE GET IT RIGHT READ AS MANY POSTS ON YOUR SUBJECTS AS POSSIBLE BEFORE TOUCHING THE KEYBOARD AS INCORRECT INFORMATION TYPED BY YOU WILL LOOK STUPID .
This forum has been aimed at the general public of this world to be seen as helpfull and sometimes informative with as little negatives as possible.
Mis-information is not only unfair but dangerous ..
Madmick

Along with Tom's books I think I will consider recommending another in future ......

Similar Messages

HT5429 How do I get Apple to fix incorrect information in Apple Maps?

Has anyone had any success with getting incorrect information in Apple Maps fixed by submitting feeback through the application?

That is the only method at this time. It will probably take some time to get it done. Unsure what, if any, window there is for repair.

ISE incorrect information on the Dashboard after root patch

Hi all,
my customer had an issue related to AD login, after Cisco dev got involved customer was given a root patch "rpssh_12.tar.gz" after applying this during the weekend now the Active guest (dashboard) displays incorrect information. meaning : it tells the customer that from the Weekend on till right now they have 613 active Guest Accounts. But this isn't true.
just wondering whether someone experienced the same problem, if not I guess i will have to escalate this to Cisco too :(.
thanks in advanace
Lance

I think there is some issue in you root patch installation. Try to remove and reinstall it.

Security questions have incorrect information how do I edit the information?

Security questions have incorrect information how do I edit the information?

How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.
This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

Incorrect information about computer with serial number?

In the Support section of the Apple website, I get some incorrect information about my MBP when I enter my serial number (to see my warranty status). It says that my computer has a glossy screen, when in fact it doesn't.
What can I do to fix this? I need to have some work done on my computer screen and it would suck getting it back with a glossy screen

go to the genus bar or call applecare

1.5.3, 3 possible bugs, incorrect information and patchy functionality

on windows XP SQL Dev 1.5.3
1.) From the tree structure, I filter Other Users, then open another users views folder. Click on the view that I want to see information for, and instead of the 7 columns that the view is actually composed of, it lists it's 7 columns 3 times for a total of 21 columns.
2.) When trying to edit a procedure I've noticed that there is typically a +/- sign to expand and collapse loops and begin/end structures. It seems like it's hit or miss whether or not you get this functionality to work.
3.) I issued the following select and got unexpected results
select col1, col2, col3, table1.*
from table1;
this should return col1, col2, col3, col1, col2, col3, col4, col5, etc... with the values from col1 - col3 being the same in each row, well on several rows I noticed the values didn't match.
I'm beginning to get very wary of using SQL Developer to do anything other than just query data. I'm sort of afraid to use to actually make any changes within the database for fear of incorrect DDL being issued back to the database and corrupting something.

Firstly, have you had a chance to test the problems on 1.5.4? The new release has certainly included some bug fixes.
As for your issues:
1) Which DB version are you connecting to? Do you get 7 or 21 columns listed if you just expand the view node instead of opening the view object tab?
I am on 1.5.4 (connecting to 10.2.0.3) and only get each column once when opening the view object tab for a view owned by another schema. Tracing SQL Developer it is using the following query to get the columns:
select c.column_name,
         decode(data_type,'CHAR'    ,data_type||'('||c.data_length||')',
                          'VARCHAR' ,data_type||'('||c.data_length||')',
                          'VARCHAR2',data_type||'('||c.data_length||')'    ,
                          'NCHAR'   ,data_type||'('||c.data_length||')'    ,
                  'NUMBER' ,decode(c.data_precision,null,'NUMBER', data_type||'('||c.data_precision||','||c.data_SCALE||')'),
                  'NVARCHAR' ,data_type||'('||c.data_length||')'    ,
                          'NVARCHAR2' ,data_type||'('||c.data_length||')'    ,
                          data_type) data_type,
            decode(nullable,'Y','Yes','No') nullable,
            c.DATA_DEFAULT,
            column_id,
            com.comments,
                        c_update.insertable,
            c_update.updatable,
            c_update.deletable
      from sys.all_tab_Columns c,
           sys.all_col_comments com,
           sys.all_updatable_columns c_update
      where c.owner      = :OBJECT_OWNER
      and   c.table_name = :OBJECT_NAME
      and   c.table_name = com.table_name
      and   c.owner = com.owner
      and   c.column_name = com.column_name
      and c_update.column_name = com.column_name
      and c_update.table_name = com.table_name
      and c_update.owner = com.owner 2) I tried the same thing (once again on 1.5.4, but have not noticed this on 1.5.3 previously), although my package didn't have for loops, but did have standard loops and while loops. There was a very slight delay before the expand/collapse options appeared, but they appeared both times after the same short delay. With very large package bodies there can be a much more noticeable delay, but from the size of your scroll bar in your screen shots, it looks as though my test package which only had a slight delay is already longer than yours.
3) I wasn't able to reproduce this either
theFurryOne

Incorrect information about GPS direction on iPhone6

The GPS direction information on photos taken by my iPhone6 are incorrect. The direction is 180° than it should be. I am shooting in North direction, but the iPhone gives me South and so on. Do I interpret the direction wrongly?

-> http://www.procamera-app.com/index.php/77.html

UWL worklist item displaying incorrect information

Hello All,
We are facing an issue with UWL workitems, as per which when we open a workitem it displays data for some other workitem/ request instead of the correct one.
We are on NW 7.0 SP 18 and the process flow is like this:
A customer is created in Portal and a customer number is assigned to it lets say number 1000, now when we check the UWL, the line item for customer number 1000 displays correctly, now when we click on it, the page loads with values as per customer number 1001. which is incorrect. These values in UWL are being fetched from a staging table in GP.
P.S: This doesnt happen to every user, this is intermittent and is more evident when a large number of workitems are present.
Any help or pointers is appreciated.
Thanks
Shailesh

Hi Karri,
Thanks for the reply.
Yes i did check SAP's note: 982888 for this issue and as per the suggestion they had asked to upgrade the component SAP-EU to SP 10 level but we are currently on SP 18 level for component SAP-EU.
Also this issue is intermittent and doesnt occure to all the users. Also the number of workitems listed in the user's inbox does seem to trigger this issue's occurence, since we are unable to replicate the same in our Development and Quality systems due to less number of workitems available.
The only thing we havent done right now is to Clear the UWL Cache and a restart of the system.
Let me know if you come across any more suggestions related to this.
Thanks
Regards,
Shailesh

PORTAL TABS DISPLAYING INCORRECT INFORMATION

Good morning
One of my colleagues playes around with some custom settings in
the portal environment. My Content Area details now appears
under the Applications tab and I cannot find my applications!
The only way I can get to my applications is by selecting it on
the home page and navigating to it. Could someone please tell
me what my colleague did wrong in order that I can rectify it.
Thanks

The Navigator page is just a portal page. The Pages, Content
Areas, Applications, and Database tabs contain portlets that
display the respective information.
Just edit the page and select the correct portlet from the
Portlet Repository. I don't know how your Portlet Repository
has been organized, but if you have trouble finding these
portlets just display the Portlet Repository (from the default
Portal home page, under the Administer tab) and search
for "Navigator".
Regards,
Jerry

CSM Displaying incorrect information

On our current infastructure we have a number of Vservers built , utilising vserver SSO-GP-443
serverfarm SSO-GP-SY-443 backup SSO-GP-NW-443
Both server farms show up and available until we fail the primary server farm, when this happens the Vserver shows as below
SSO-GP-443 SLB TCP 172.27.117.25/32:443 ALL OUTOFSERVICE 1
Although on testing, traffic is passed to the servers and the display may be purely cosmetic, but we would like this confirmed and also if its a known bug , if this is the case when this bug will be fixed
c6slb-apc.4-2-4.bin CSM Code
s72033-advipservicesk9_wan-mz.122-18.SXF5.bin Switch Code

If the data is incorrect, the system generates error messages and displays the page on which the error occurs.
http://www.cisco.com/en/US/products/ps6498/products_user_guide_chapter09186a00806b79f3.html#wp1055751

Pacman-key wiki: Incorrect information

Good Morning all
The new pacman-key wiki has some misleading information within it, that should be corrected/clarified.
https://wiki.archlinux.org/index.php/Pa … e_checking
specifically
Edit /etc/pacman.conf and uncomment the following line under [options]:
SigLevel = Never
try it. The repositories are below this line and therefore the parser takes the last invocation of the SigLevel (global) option at a local level and doesn't honour the setting. You also need to comment any 'SigLevel' lines within the [core], [community] or [extra] repositories.
It should be clarified because it causes confusion.
Thanks
GregW
Last edited by GregW (2012-01-25 10:52:44)

It is a wiki... edit it.
You do not have permission to edit this page, for the following reasons:
The action you have requested is limited to users in the group: Users.
You must confirm your e-mail address before editing pages. Please set and validate your e-mail address through your user preferences.
You can view and copy the source of this page:
Oh well, nevermind, i've mentioned it.

Correct Blackberry Playbook incorrect information in Tablet comparison

Currently Best Buy comparison of Tablets do not contain correct information about Adobe Flash support aspect of Playbook.
See below link:
http://www.bestbuy.com/site/Computers-Promotions/Tablet+Operating+Systems/pcmcat236500050008.c?id=pc...
Please get it corrected immediately so that customers are not misled by misinformation on your site.
The funny part is that actually Playbook is the Tablet with best implementation and performance of Adobe Flash so you may want to highlight that also.
Another point - its surprising you think IPad is not part of Tablets (is it not a Tablet??)

cjterminator,
Welcome to the forums!
You're right: the PlayBook has great Adobe Flash support and I got this reported. Thank you for taking a moment to post.
Let us know if you have any other questions or concerns.
Regards,
Douglas|Social Media Specialist | Best Buy® Corporate
Private Message

How do I get Apple to correct incorrect information in Maps?

In maps they have spelled the island I live on wrong. It shows as Pugget Island and should read Puget Island.

Hi, Eric.
Thank you for visiting Apple Support Communities.
I would recommend reporting a problem with the spelling of the island name via the steps in the article below.
Get help with Maps on your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT6466
Cheers,
Jason H.

Game Center: Incorrect Information/Sync/Games

My game center lists games I have never downloaded and never played on any device. Also, my scores for games I do have are not syncing properly. What is going on and how can I stop it?

Add me: Malignance

Oracle Press book gives incorrect information about when you are certiifed

SQL Certified Expert Exam Gudie: ISBN: 978-0-07-161421-4
Page: 12
... and I left (the testing center) a happy and Certified SQL Expert.
THIS IS WRONG.
When you leave the exam you receive a score report indicating you have passed the exam (I beleive subject to review).
BUT
You are not certified until either:
- (1) you receive a success kit from Oracle or
- (2) it is shown on the Oracle Certview Database.
The distinction is really important as until that time you have agreed not to represent yourself as certified.
This should have read something like .....
... and I left (the testing center) happy knowing that in a few weeks time my certification success should be confirmed in the Oracle Certview Database and my Certification success kits should arrive in a few weeks.
I am forever screaming at people on the Oracle Forums not to represent themselves as certified until they get a success kit or see it on Certview and an Oracle Press book goes against this!!!!!!
=:-O
I know this is possibly apparent nit-picking in the case of this certification ... but it isn't. I've never heard of it happening, but the exam score can be revised until its confirmed (not that I've ever seen this happen ... and wold be almost impossible except for cheating). For instance the exam delivery software/configuration could glitch and deliver 1z0-051 questions instead of 1z0-047 invalidating ones result. I know we all know this is impossible but would you be prepared to stake all your worldly goods that this has never happened and will never happen.
.................................

They should write a big "THIS IS A DRAMATIZATION" around it!
LOL!
Bye,
Antonio

INCORRECT INFORMATION ON 6230i

Similar Messages

Maybe you are looking for