Incorrect KT4 Ultra mobo & AMD processor speed
Hello everyone,
This is somewhat interesting. About a few months ago, a friend and myself built my system and it's been working fine with my games, AutoCad and all. It includes a KT4 Ultra mobo and an AMD XP 2000 processor, etc.
I didn't realized it then, but when I check under "System" icon under "Control Panel", it indicates that the processor is running at 1.25 mhz.
I know that the XP 2000 processor should run at 1.667 mhz, so why is my computer indicating the wrong speed??
The processor came in the original sealed AMD box w/ fan and all info.
Should I run another speed test from another software??
Is the mobo setup incorrectly and running the processor slower than it should be?? or the mobo running the processor fine, but showing the wrong speed??
Any help would be appreciated.
Thank you.
P.S...I have also ran the "System Information" under "System Tools" and it also shows the wrong speed.
AMD Athlon XP 2000
KT4 Ultra mobo
512 mb DDR 2700 ram
Western Digital 40Gb 7200rpm HD
Windows XP Home Edition
Mad Dog GForce 4 MX 440 AGP 8X
Memorex 52x24x52 burner
MSI DVD player
Intel V.92 modem
RealTek PCI Ethernet NIC
Check your motherbaord for the correct jumper. The board is set at 100Mhz jumper, but should be set for 133Mhz. Also, check your bios and make sure 133Mhz frontside buss is enabled. Listing computer specs might help things, too.
Similar Messages
-
MSI KT4 ultra and AMD ATHLON 2600+ and Corsair 512Mb 3200
Hello,
i've bought a: MSI KT4 ULTRA and a AMD ATHLON 2600+
Today, i've updated the bios to the version 1.3! So: no problem to reboot after the process complete.
BUT, now i can't set the CPU at 2.16Ghz (280Mhz clock) because if i set the clock up to 100Mhz it doesn't reboot anymore! the motherboard detect the frequency @ 1250 Mhz :(((
Please: HELP ME
(sorry for the grammar and / the english) but i'm a french guy.Hi,
I had the same issues, see the thread:
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=11717&boardid=13&styleid=1
Essentially I had to set (in the BIOS) the FSB to 166 and left the Multiplier on auto. This ment the processor was reported properly as 2600+, but the memory will only run at 333 MHz... Yeah I think I wasted the money on getting the latest and greatest memory too....
Had me worried for a while, I though my supplier had palmed a bad chip off on me.... It just that the board can't do the highest speed chips and the highest speed memory at the same time (it states that that is unsupported in the manual...)
hope the helps... -
Kt4 ultra w/amd 2.4gh
I'm trying to install the kt4 ultra with an amd 2.4mh cpu using win98.
If I download the drivers from the disk provided, windows will hang up at the point at which the pci driver and/or the usp drivers are installed. If I don't install them, I get a yellow "!" on the system device list and I can't get the usb to recognize my scanner.
Can anyone help???
I can be reached at [email protected]the 4in1 or Hyperion drivers are specific to Via Motherboards - the one that comes on your mobo's cd is version 4.43 i think - from memory, after that version Via renamed the drivers to hyperions - funky name. If you have old or obsolete drivers installed this may affect how your mobo works with it's devices. you need to get the VIA Hyperion 4in1 v4.46, released 10 March 2003 from :here:
it is entirely possible that installing these drivers may not solve your problem - but at least give them a try - failing that remove the devices causing the problems from your device manager and let windows auto detect them after a restart. -
MSI KT4 Ultra and AMD XP3200+
Hi,
Is it possible to run an AMD Athlon XP 3200+ on the MSI KT4 Ultra Motherboard?
I know the motherboard supports FSB200/266/333, but will the cpu work if I manually set it to FSB400 in the bios?
Thanks for you help.I don't think the cpu is unlocked, it is an original 3200+.
I thought you need an unlocked cpu if you want to overclock the cpu.
I just want to leave the multiplier on auto and set the frequency to 200MHz (its original setting).
The reason I need to know is that I stupidly bought the cpu without checking my motherboard FSB support and I cant return the cpu.
I have not received it yet and wanted to know if it was possible to get my computer up and running even if the KT4 Ultra does not officially support FSB400.
Would there be any harm in trying the cpu in my motherboard.
If anyone has managed to run an AMD XP3200+ cpu on a MSI KT4 Ultra, please let me know.
Thank You. -
K7N420 Pro: amd processor speed?
Hi,
i was wondering with the MSI K7N420 Pro, what's the fastest amd processor that can be installed, right now i have an athlon 1800+.
Where can this information be found by the way?
Thanks.any thrbrd cpu with a 266fsb rating they make with uptodate bios
so xp 2600 is possible but most xp 2600 are 333 fsb not the 266 you need
so be carefull
dont get a thornton they dont work with it -
Ok, cleared CMOS - installed the new cpu
everything turns on and of course BIOS says there is an error with bad/default BIOS settings so the 2.16 Ghz is running at 1.2 Ghz but I cant get it to load windows ... any ideas if this is BIOS tweaking settings, or a format is defintely needed, id like to salvage some MP3s ;[
KT 4 Ultra
AMD XP 2600+
Radeon 9700 Pro
768 MB DDRI don't think it's time to format.
First of all you need BIOS version 1.2 or older, preferably the latest. Then clear CMOS and go with default settings. You migh need to force your FSB to 166 and set multiplier to default.
Good luck -
KT4 Ultra and AMD XP2600+
I' m using an KT4Ultra board with AMD XP2600+. BISO Version 1.3. FSB is set to 133MHz and cpu-factor to auto. Bios show XP2000+. The MSI CPU list recommanded FSB 133MHz and CPU factor 16. I tried to set these but CPU-factor is only possible to 15 in BIOS. Is there any out there who could help me to fix these problem ?(
there are 2x versions xp 2600 one fsb 133 one fsb 166
it would make sense yours is a 166 version -
KT4 Ultra Need Help!!!
I have a KT4 Ultra Mobo. AMD 1800+. Thermal take PSU 420W. Coppershim. Thermal grease. I changed the FSB to 133 from 100. And everytime i do heavy load install, like updating winxp to sp1. it keeps rebooting. this thing is so unstable. Please help. I need some advice. I also have 3 case fans. and two fans on the PSU. idle temp is 45 degrees. some people here have lower temps than that. why is that?
i have an update... i used the cooler xp to cool the cpu down during installation. it worked, but as the installation goes, it had an extraction fail due to lack of memory or swap file or corrupt file. memory is fine. so i was thinking, maybe it's the cooler xp processor usage. any ideas?
-
Hi,
when I first installed my xp 2400 on my KT4 ultra mobo my temps were between 32c and max of 38c. Now that it's been working for a while my temp stays between 47c and 51c. Is that too hot? What is too hot? What else can I do to lower my temps?
I have the AMD approved heatsink listed in my specs below. I am using Artic Silver II. Am I going to have to reapply this every month or so?
Any suggestions would be great.
Thanks in advanceI don't believe those temps are too high but it is curious that they are higher than before.
Did you follow all the instructions when you applied the Arctic Silver?
Also, I would definitely open up the case and give it a very thorough cleaning. Especially between the fins of the HSF.
I do know with mine, two front and one rear case fan, that it gets dusty as heck in about 4 weeks!! And we use an electronic air cleaner on the furnace. After about a month, I pick up two cans of air and clean it out very well (with some left over).
Do you have any case fans? If you do, clean them as well. If you don't, it may be a good idea to add them front (air in) and rear (air out).
Dale -
I HAVE A KT4 ULTRA MOTHERBOARD +
AMD ATHLON XP 2100+ PROCESSOR +
512MB DDR333 PC2700 MEMORY +
128MB RADEON 9000 ATLANTIS POWERED BY ATI.
WHEN I GO INTO MY SYSTEM IT SAY`S I HAVE GOT A AMD XP1500+ 1.30GHZ ??????
IF I GO INTO BIOS AND GOTO ADVANCED CHIPSET FEATURES,
THEN GO INTO DRAM TIMING CONTROL,
IT COMES UP WITH CURRENT HOST CLOCK =100MHZ??
WHICH I CAN NOT CHANGE??????
CAN SOME ONE HELP MY PLEASE BE FOR I GO MAD AND RIP ALL MY HAIR OUT????????????????????????????????Quote
Originally posted by wonkanoby
change fsb in bios to 133
read manual -
Still Cannot do anything on this board(KT4 Ultra)
So in the beginning I bought this new system, here are the specs:
(Original Specs)
MB: MSI KT4 Ultra
CPU: AMD XP 2200+
RAM1: 512MB PC2700
RAM2: 512MB PC2700
AGP: Nvidia Ti4200 128MB
PCI(All):Empty
IDE1: 80gig Western Digital
IDE2: literon 16x DVD
PSU: 300W
(cant think of anything else)
So when i got it home, I could not Install Win2K AT ALL, No matter what i did or tried still would not install.
So after awhile i said forget it and install WinXP, worked installed fine(or so i thought). I installed SP1, d/l all the updates. d/l VIA 4.45 and for the graphics card i d.l the latest certified drivers. Well i thought i was in the clear, but then i started getting errors or problems while trying to run games or 3D apps(cinema4D). So i went through all the forums and ended up replacing the PSU witha Antec true power 480, and the CPU cooler with a volcano 9. but still nothing but problems so i took it back to my dealer and they deemed the mobo bad or something and gave us a new one.took it home and still Errors, did a fresh install of winxp(win2k could still not install)Still erros everywhere. so i took back to them again. and they claimed this time that the cpu cooler was to big and wasent makeing full contact, and gave us a smaller one(i think a volcano7?) i was like alright that is understandable. got it home did fresh install AND STILL Errors.
I dont know what to do, lets see i cant run 3Dmark2001SE program just quits no error. Quake3 quits,Cinema4D says it has generaded errors and needs to quit. at first PCMark2002 did not work, But i was runnin a test on my harddrives and C: would keep failing, so i looked in one of the logs and said something about memory, so i changed my swap file to D: and boom PCmark2002 went all the way trough its tests, and i could do tests on my c and d without any errors but i still can use 3d apps?
Any ideas please
Thanks in advanced
Davidboy
"......so i took back to them again. and they claimed this time that the cpu cooler was to big and wasent makeing full contact, and gave us a smaller one(i think a volcano7?)....."
THATS SO NOT TRUE ?
Volcano 9+ was a nice copper base, and it makes great contact with the cpu core
Man i built a simliar PC for a friend:
MSI KT4-Ultra (bios version 1.3)
Athlon XP2400+ FSB266 Retail Box
TT Volcano 9+ using box white paste
Kingston 512 MB PC2700 RAM
Ati Radeon AIW 7500 AGP4x
WD 80 GB 7200 RPM
LG52x24x52x CDRW
CNET 10/100 NIC
Windows XP Pro SP1 /Via 4.45
SP CASE Tower 400watt psu
maybe, it can be your memory, thats my guess
or could be you setting AGP8x? -
can anybody help me please
i just bought a new kt4 ultra with amd xp2200 cpu
256 ddr 333 mem
msi 420 gf4
ibm 40 gig hd
msi dragon writer
adaptec 2904 scsi card
coolermaster hsc-v62 heatsink and fan pure copper
300w case
cable modem
problem is it crashes and cant set the fsb abouve 131 used to be 129 max untill i bought extra fans and heatsink
running on xp pro
i get the error message
stop
0x000000a(0x01e40067)0x897c32db)0x00000000)
temp is 39/40 idle
also crashes paying quake 3 and unreal tourney after a while
do i need a new 400 watt case or what
or is it the grafix card
thanks in advance ;(ok went to a computer fair to look at the cases and psu
i explained to one of the sellers there what problems i had and he said he had a similiar problem before and suggested that i put some branded samsung ram in this i did and it booted up first time at 133fsb
so i decided to put the old ram in as well and low and behold they both work ok
quake 3 working as well
the only question i have one is pc2100 the samsung one
and the old one was team 2700 i pushed the speed of the ram upto 333 and it works fine
can you please give me your assumptions or advice please i have kept the old 300w psu. still
????strange -
No Sound with KT4 Ultra - FISR -- HELP!
hey
I got a KT4 Ultra - FISR along with and XP 2400 and other goodies for christmas. I put the machine together and installed 98se, and all of the included drivers the came on the MSI Utilities disk. Everything was working perfectly with it (got 11752 on 3dmark 2001, is that a decent score?) anyways everything was cool except the on-board c-media sound was not working at all. ?( I have 2 speakers w/ sub and i have them plugged into the line out spot in the mobo. I have turned the sound on in my BIOS and messed with all the sound settings in windows and still i get no sound at all. I even unplugged the bracket that came with it for surround because i saw it could possibly cause some problems. I then checked all my connections and still no sound. X( I was woundering if there are any other settings or jumpers that i need to set for my sound to work. Any additional information on how to get my sound to work would be greately appreciated. My system specs are below. Thankz
MSI KT4 Ultra-FISR
AMD XP 2400+
MSI GF4 TI 4400
256 MB GeIL PC2700
120 GB Maxtor ATA/133
ASUS 48/16/48 CD-RW
Pioneer 16x DVD
Hyperion 4in1
Win 98sebump
-
Hi. I seem to be getting conflicting info re power supply necessary for my mobo+AMD combo. I have an MSI KT4 Ultra with AMD XP2200 and a PNY GF4 4200 Ti graphics card. The graphics card states a requirement of a 350 watt Power Supply. Reading different notes on this site, it seems that I should aim for anything over 300W min. My new case has a 300W supply giving 180W combined; I also have a 400W supply, but this also states 180W combined. Quoted A-Ratings for the 400W supply are 92W 3.3v, 165W 5v, 180W 12v.
Should I switch the power supplies to cater for the graphics card, or not bother? Or should I look for a better supply altogether?
Please advise, Thanks.
This system is not yet built - and its going to be my first scratch build.Try a Topower TOP-470P4 if you are concerned with the available power. It is an ATX 12V / P4 supply, which I am using with my PC. (Specs below.)
http://www.topower.com.tw
The documents claim a combined 3.3 & 5 Volt power of 235Watt, which should please you. I run a Leadtek GE Force 4 Ti 4600 with no problems using it.
Extract of specs from site.
Total Watt 470W
DC Output +3.3V +5V +12V -12V -5V +5VSB
Max 26A 47A 28A 1.0A 0.8A 2.5A
Peak 28A 54A 30A 1.0A 0.8A 2.5A
Combined 235W 336W 12W 4W 12.5W
450W 28W
Peak Load 570W/60secs
Cheers. :] -
hello! i am having a problem with my kt4 ultra.
it originally booted, but once i hit delete to go into setup everything crashed. now when i boot, i get 2 beeps followed by another 8 beeps.
i've done alot of browsing through these forums and other sites, and heres what i find over and over:
10 Short
CMOS register
Check the motherboard and remove all expansion cards and replace one at a time.
i've done this and there is still a problem. am i doing the wrong diagnostics for the 2-8 beep combo?i cleared cmos by removing battery and via the jumper method. no go.
the cpu/mobo/ram/video/ethernet were in another computer and worked previously. i sold them to my friend and had him buy a new case - i got everything setup the first time, booted, hit del to go into bios to make sure all settings were correct. it crashed and now does the 2-8 combo beep.
previously the mobo was in another case and we used different ram, but i still get the 2-8 beep combo using that same ram.
spec are:
350w ps
kt4 ultra mobo
athlon xp 2200+
geforce 4 ti4600
1 gig ddr 300 ram
30 gig western digital 5400 rpm hd
philips cdrom
netgear ethernet card
+3.3 = 28A
+5 = 35A
+12 = 17A
Maybe you are looking for
-
Greetings, I scripted in 10.7 the mounting of a Windows share (SMB) for some back end tasks. My script needs to dump collected data over to a Windows share for further processing. My code seems to have broken since my upgrade to 10.8. Here is the lin
-
I can't copy and then paste from page. Anybody know why?
Having written a long article in Page, I find that when I try to copy and paste it doesn't work, When I paste the article disappears as if i deleted it. Anybody know why?
-
HT1473 Copy music from CDs to iTunes library without a CD drive
I have a Macbook without a CD drive (purchased in winter 2012-13); my husband has a Mac desktop (few years old). I'd like to copy some music from CDs to my iTunes library for listening on my iPhone (4S) and Mac (and, perhaps, one day, iPad). My husba
-
I just bought the basic service in order to convert file from Adobe to word and I cannot convert my first file. I keep being offered to buy the service again or I a pop up shows stating that there is a technical. Please advise what to do. NS
-
Dependent Dynamic LOV lists in a table format
I have a screen where the user can enter multiple rows into a tabular layout. Three columns have LOV's where the selection in the first LOV should restrict the list in the Second LOV which will restrict the list in the third LOV. I think I could mana