Incorrect Navigation from homepage

I am using AS3.0
I have created simple forward naviagtion from my homepage to my second screen using the code below and a simple button (click1)
//handle events for buttons...
click1.addEventListener(MouseEvent.CLICK, clickSection1);
function clickSection1(evtObj:MouseEvent){
//go to the section clicked on...
gotoAndStop("screen3");
Slightly modified code is used on consequent pages to navigate forward through my site.
I have also created a home button that navigates me back to my first screen (called screen2) using the following code...
home_btn.addEventListener(MouseEvent.CLICK, clickhome1);
function clickhome1(e:MouseEvent):void
{gotoAndStop("screen2")
However, when I return to the homepage and click forward, instead of taking me to the next page and the next page, it jumps me forward directly to the 5th. screen.
Any help is much appreciated.
Thankyou
Max

Hi there,
Apologies for the delay on responding to this post.
Points 2-4 below are definitely addressed in my file.
i.e. - The button is on it's own layer, with the layer stretching throughout the timeline on one uninteruppted keyframe.
However I'm not sure about the 1st.
There is listener code on every screen that the button navigates to, (to allow it to be navigated from)...
Just to clairfy the issue, the file proceeds through 20 screens using the same 'next' button, to the end of the process. Once at the end, the code navigates back to the 1st page - which it does successfully - and then gets stuck there, meaning that the user is not allowed to view the file a second time without closing and re-opening.
Any help you can provide form that info is much appreciated.
Thanks

Similar Messages

Error with getAttribute( ) function, while navigating from parent to child

Hi,
I have been trying to develop a small project with two task flow(TF).
Both the TF contains only one page.
Both of my pages are made from different VO,s.
from the Parent page (P1) if i select a row and navigate to Child Page (P2), i need to filter the result in P2 using the selected row in P1.
From P1 when i selected a row and navigate to P2 by clicking a button, i have used a Bean to get the parameters from the selected row and Passed the same to TF2.
I made an AMImpl method and binded it to P2, such that whenever my P2 render this AMImpl method will be executed.
Inside the AMImpl method i am trying to run the VO query of P2 with new selected criteria from TF1 ie.P1.
i also have few more functionalites in P2 like when i select a row and clicks on a button i will some some info on a pop-up for the corresponding selected row.
When i run the page P2 individually,all works fine. But when i navigate from P1 to P2 none of the functions are working, i.e when i click on the button on P2 to see popup its showing that Attribute is Null in the selected row, even though the attribute is not null. After navigation in P2 this function getAttribute( ) is returning null. but when i run P2 individually the same function is returning all required fields without error.
Actual AMimpl.java method code :
RowKeySet selectedRows =
Table.getSelectedRowKeys(); //Table is a "Rich Table" i declared outside the method and binded to my actual table on P2
Iterator selectedRowsIterator =
selectedRows.iterator();
DCBindingContainer dc =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding iterBinding =
dc.findIteratorBinding("P2Iterator");
RowSetIterator rowSetIterator = iterBinding.getRowSetIterator();
Key selectedRowkey =
(Key)((List)(selectedRowsIterator.next())).get(0);
Row selectedRow = rowSetIterator.getRow(selectedRowkey);
String parameter1ForCurrentRow =
selectedRow.getAttribute("parameter1").toString(); // -->this particular line is returning null while navigating from P1 to P2, but the same line returns actual value if the run P2 individually
Kindly guide me how to achieve this.
Regards
Siva

Hi Timo
thanks for your reply.
The reason I am doing this is to avoid the numerous instances of VO2 (Child VO) that will get created for every row of VO1. (eg: 100 rows of Vo1 means 100 instances of VO2 created & executed ).
I am trying to avoid that by Binding and executing the params to a single child VO instance, only on the click of a button.
Please advise if my assumption about as many child instances of VO2 being created and executed is incorrect and ADFBC does some kind of Lazy instantiation / loading of the child VO until the point of execution of the UI code where it is bound to ?

Error while navigating from a report in OBIEE

I get the below error while navigating from one report to another report
Odbc driver returned an error (SQLExecDirectW).
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 16001] ODBC error state: 37000 code: 1101 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate a new page for database 'TEMPDB'
because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup
, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup..
[nQSError: 16015] SQL statement execution failed. (HY000).
Any inputs on this is highly appreciated.
Thanks,
Vasavi

Hi Vasavi,
There is no Temp space in Data base to run queries .Please contact your DBA to increase your db size
thanks,
saichand.v
Edited by: Saichand Varanasi on Jul 14, 2010 7:35 AM

Mail 4.1 incorrect "sending from" settings, won't send SMTP mail

I've noted quite a few others reporting 10.6.1 SMTP mail problems, but I haven't seen my specific issue noted elsewhere.
I've been able to send using my IMAP AOL address via Mail and longtime SMTP settings until today. Now, Mail apparently is scrambling outgoing email addresses and mismatching them with the outgoing SMTP settings. For instance:
Using AOL address example [email protected] (showing correctly in the "From" window), the email will not send. The "cannot sent message using the server 'LG'..." dialogue comes up with the options to edit the SMTP server list or use the Connection Doctor. (All Connection Doctor reports coming back green, so the trouble's not there.)
Looking a little closer at the dialogue box, though, it says Mail thinks the outgoing message is being sent from an entirely separate email address. In a couple of tests, the incorrect "sending from" address changes - one time it was a different AOL account, the next was an entirely separate .edu account. Wish I could attach a screenshot, but the bottomline is: I can see the "From" field showing the [email protected] address, but the error message about reconciling the outgoing server settings shows "Sending from: My Name <[email protected]>"
Whatever the issue is, it is apparently not affecting (so far) my IMAP personal domain or IMAP gmail accounts - they're both sending and receiving normally.
So Mail apparently is trying to send AOL account mail, but it's not finding the correct SMTP connection because somewhere along the way it's shifted the "sending from" to a different account.
Any thoughts?

I've been using Mail app with AOL accounts and the current settings for years with no trouble. This is new.
I still think it's a Mail app issue - it's clearly showing in the error message a different "Sending from" account from the one that's actually selected and showing in the "From" window of the email message. It's as though Mail is trying to apply the existing SMTP settings for an erroneous account to the outgoing message. It's either trying to send [email protected] mail with YY.aol.com SMTP settings or vice versa.
I'd be open to re-creating the AOL IMPAP accounts if I could avoid losing years worth of sent and received messages. I have everything backed up with Time Machine, but I've had very erratic email recovery issues with it since Snow Leopard too.

Blank Screen while navigating from one screen to another in a web applicati

Blank Screen while navigating from one screen to another in a web application.
While navigating through the screens of the web-based application, I get blank screen at times. The application menu bar is still visible and the header and footer jsps are also still available. The main processing frame alone goes blank. Once I get the blank screen, I am able to choose from the menu option and contine navigating through the screens.
The application has been deployed on WebSphere Application Server v6.0 and uses JDK 1.4.2. I have checked the application, server and systemerr logs. And there are no exceptions in any of the log files. There is no difference in the logs for a normal flow and the flow when the blank screen occurs.
The blank screen does not occur always. It occurs around 3 out of 10 times. If you consider a particular page, mostly it loads normally and very few times, the blank screen occurs.
Compression filter is being used and it gets invoked for every request. Size before and after compression also gets printed in the logs.
Could this be causing any issue in terms of memory handled or could any jsp timeout be happening, though there are no exceptions in the logs.

Well, since no one has any ideas, here is my two cents worth:
Can you turn off compression and see if the problem goes away? If not, I suggest creating a small separate project with the same functionality as that part of the program that causes problems and see if you can duplicate it. Use System.out.println() in the java code and out.write() in the JSP pages throughout the java and JSP code to write to the log file or console as each section is run to see what section is causing problems. You can also consider commenting out sections of code in your JSP page to see if you can isolate the problem.
I had a similar problem with the screen being blank and this is what I found:
My JSP page had an include tag in it that included another JSP page. The outer JSP page was drawn and waited for the included JSP page to be drawn. The logic took several minutes to run and something timed out. The inner JSP page was never drawn. No log entry occurred. It appears that it was not Apache or Tomcat that caused the problem, but some firewall or similiar such device. If you have a firewall or similar device, see if the person who maintains it can temporarily set its timeout to a very long time (15 minutes) to see if the problem goes away. Apache and Tomcat probably also have a timeout feature too. You will have to read up on their configuration settings on how to set them.
By the way, each of those devices probably has its own log file you can read to see if its reporting an error.

Navigation from One page to another page through hyperlink in webcenter

Hi All,
I created ADF unbounded taskflow and want to use it in my webcenter portal application for navigation from one page say Page x to another say Page y by clicking on the hyperlink in the Page x. How to do this in webcenter portal application. When I try to add the taskflow in the navigation model it is taking to the blank page instead of taking to Page x. Many thanks in advance.
Regards
Kaushik Gopalakrishnan

Take a look at this discussion (and referenced resources): http://groups.google.com/group/webcenter-emg/browse_thread/thread/b32d3252228c9e0a

Problem in navigating from one report to another in OBIEE 10g

Hi,
I am facing an issue with OBIEE 10g while applying navigation on my reports.
Lets suppose I made a report showing list of all items(in broad categories) sold on a particular day, say Dairy, Frozen Foods, Chocolates etc.In this report there is a date prompt showing the date of sale.
Now there are certain items that are distributed within these categories, like dairy includes milk, cheese, butter etc.
Hence, my navigation should be like when I click on a particular item category, the control should move on to the report which has all items under that particular category and the prompt for this report should show the same date as passed in the previous report.
But sometimes what happens is that on clicking the navigation from first report to the second one, the date is not persisting in the prompt. I say sometimes because at times the navigation does work correctly. This is a bug of Obiee or something which is giving unexpected results.
Kindly help with your suggestions.
Thanks
Ankita

Ankita,
This is not a bug in OBIEE...I'm sure something is missing. If this is working for some cases and not working for some other case then you will need to find the root cause. Try in bits and pieces...Step by Step with some dates (unit testing). Ideally this shud work properly.
For an instance try with OBIEE drilldown feature and not with navigation with a single sale date and observe the behavior.
Hope its clear...

Any way to add a link FROM HomePage TO iWeb?

Any way to add a link FROM HomePage TO iWeb? The instruction I found in Help only discussed adding a link from iWeb to HomePage. Since most of my family already accesses my HomePage, I'd like to be able to add a link to the iWeb pages
This is the only instruction I've been able to find in connection with this topic: "If you’ve previously published webpages using HomePage, those pages are still available at http://homepage.mac.com/YourMemberName. Websites you create in iWeb are available at http://web.mac.com/YourMemberName/iweb/SiteName. If you’ve created webpages using the .Mac HomePage feature, you can put a link to your old homepage on the first page of your new iWeb site. On your iDisk, your HomePage sites are stored in the Sites folder. Your iWeb sites are in the Web folder."
Thanks
I use both my Mac and my Dell

I'll try this, but why in the world should it be so complex? I'll let you know if it works. but how do we tell Apple/Mac that this shouldn't be rocket science, but rather something that's done with the click of a button. They're both .mac software products. Why can't they talk to each other?
B
I use both my Mac and my Dell

Popups: Navigation from view to window does not work

Hi,
I open a second window as popup. This window has 2 views embedded, displaying view1 first. On some actions I would like to navigate to view2.
Defining an outbound plug on view1 and an inbound plug on view2, connecting them and firing the outbound withith the onaction works absolutely fine.
However, for some reasons I would like to avoid a direct navigation, but would like to navigate from view1 to the popupo window and from there to view2 (or maybe another view, ofcourse also embedded in the same popup window). Unfortunately I fail on this scenario - I can fire the view-to-window plug, but the destination on the window side (handle in method) is never reached.
Since the same concept works fine on non-popup windows I wonder whether a navigation from view to embedded window does not work for popups?
Any idea?

Hi Yashpal,
no, just one window.
The first link is view1 -> window, the second window -> view2.
I.e., I fire in the view the outbound plug, which is connected with its window.
In the window I fire an outbound plug, which is connected to view2.
In theory this should work - for non-popup windows I do not have any problem at all, however, for popup windows the navigation from view1 to the window is not processed.
In the meantime I played a little bit further: Instead of firing a navigation from view1, I now fire an event defined in the component contoller, on which an event method is registered within the window. Doing so, I reach the window, which I didn't reach via the navigation link. Once in the window, firing to view2 works just fine ...
Hope the issue is a bit clearer now. Also I found a solution, I am surprised that the simpler way via navigation does not work.

[ADF-11.1.2] Security 401 error ONLY while navigating from 1 BTF to another

Hi,
I have 2 BTF in my Security-Enabled ADF application. First BTF has a Task Flow Call to another BTF.
I then created 2 web pages for each BTF. Page A for first BTF and B for second BTF.
If I open any page, it ask for Authentication and display the page with BTF content on web browser.
The only Problem is, if I click on the button on first BTF which has a navigation to second BTF, it throws me following error.
Note: All Task Flows and web page has 'View' permission for 'authenticated-role' Rule. Can someone please explain if I can open 2 BTF separately, then why it is throwing 401 error while navigating from 1 BTF to another. Am I missing assigning any permission ?
javax.servlet.ServletException: ADF_FACES-60101:HTTP Error Status Code: 401."
     at oracle.adfinternal.view.faces.config.rich.XmlHttpServletResponse._logException(XmlHttpServletResponse.java:140)
     at oracle.adfinternal.view.faces.config.rich.XmlHttpServletResponse.sendError(XmlHttpServletResponse.java:106)
     at oracle.adfinternal.view.faces.config.rich.XmlHttpServletResponse.sendError(XmlHttpServletResponse.java:100)
     at oracle.adfinternal.controller.util.JsfInterfaceImpl.sendResponseError(JsfInterfaceImpl.java:477)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.handleException(ControlFlowEngine.java:725)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:934)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:824)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:554)
     at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:158)
     at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:115)
     at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:84)
     at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:50)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
     at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:159)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1129)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:353)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:204)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:121)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

I upgraded to 11.1.2.2... and the good news is.. it throws me more appropriate error message:-
ADFC-0619: Authorization check failed: '/WEB-INF/task-flow-name' 'VIEW'.
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #2I was using template taskflow from another adf application, but I failed to give permission to that task flow template because I didn't check "Show task flows imported from ADF libraries".
I gave permission to task template and is working fine now.. :)

Navigating from ME49 to ME47 tcode 'General object service' icon missing

Hi All ,
We have scenario wherein we are navigating from transaction ME49 to ME47 .
In ME47 'General Object Services' icon is missing .
When we direcly go to ME47 , it is working fine .
If any of you come across this issue , Pl.provide inputs .
Thanks in Advance,

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

Portal integration: Navigation from Web Dynpro to other iviews

Hello,
I am trying to implement a navigation from my web dynpro application (which is embedded in our corporate Netweaver portal) to another portal iview.
Therefor I use the "absolute navigation" functionality:
CALL METHOD lo_portal_manager->navigate_absolute
EXPORTING
navigation_target = 'pcd:portal_content/BOSCH_CONTENT/INTERNAL/CONTENT/MY_WORK/MANAGEMENT_SUPPORT/ORDERINGS/PAGES/rb.inside.page.EWORKS_PROCUREMENT'
By hitting a button in the web dynpro this functionality is executed but nothing happens.
The iview defined as target is not called.
The SAP documentation (http://help.sap.com/saphelp_nw70/helpdata/de/18/f96f4132f15c58e10000000a1550b0/frameset.htm) says, the "Absolute address, path for page or iView in the portal content directory. " should be defined as target.
Address, for example ROLES://portal_content/...
I also copied the address from the portal content directory, but it always starts with "pcd:portal_content" and not with "ROLES://portal_content/".
Is this an issue of the portal or of the method call?
Thank you a lot in advance...
Regards
Stefan Löhlein

Hi,
1.first check if popup blokcer is is disabled for the portal url you are testing with.(This is asuming you are navigating to the iview as an external window).
2.Make sure you are testing this in the context of portal .ie you are runnning the web dynpro within portal and not outside portal as an application.
3.The iview that you would be prefixing with ROLES:// should have the permissions set for the user you are testing with.
Regards,
Ashok

Value disappearing while navigating from Page2 to Page1

Hi Friends,
Scenario: I am navigating from page1 to page2. While doing so am retaining the AM state. The problem is when i navigate from page2 to page1 the new values that i have entered in page1 disappears but the queries which i executed while loading page1 is retained and those values are displayed.
I double checked whether i have executed/instantiated a query but its negative. Also i checked the row count of the view object, its giving the same count.
Can u all please help me in resolving a solution?
Thanks,
KR
Edited by: KR on Jun 3, 2013 11:01 PM

Hi Sandeep,
I have all protected all the VO execution with condition check.
Since you have asked... i am posting my controller code for page1 below...
public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
super.processRequest(pageContext, webBean);
System.out.println("In PR : " + pageContext.getParameter(EVENT_PARAM));
System.out.println(pageContext.getSessionId());
OAFormValueBean awid = (OAFormValueBean)webBean.findChildRecursive("AwardHeaderId");
String mode = pageContext.getParameter("mode");
System.out.println("mode : "+mode);
OAApplicationModule oaam = pageContext.getApplicationModule(webBean);
String attach = (String)pageContext.getTransactionValue("add");
System.out.println("Attach : " + attach);
String tenderNumber =
pageContext.getParameter("tendno");
if (attach == null && "Create".equals(mode) && !"itemReturn".equals(mode)) {
System.out.println("Inside attach");
Serializable[] tenderNo = { tenderNumber };
oaam.invokeMethod("executeTenderDetails", tenderNo);
oaam.invokeMethod("executeAwardDetails", tenderNo);
oaam.invokeMethod("initNotes");
oaam.invokeMethod("executeNotesHistory", tenderNo);
oaam.invokeMethod("initAttach");
System.out.println("Awid : "+awid.getValue(pageContext));
pageContext.removeTransactionValue("add");
System.out.println("add Trans : "+pageContext.getTransactionValue("add"));
System.out.println("End");
OAViewObject vo = (OAViewObject)oaam.findViewObject("XxdmIcmAwardNotesHistVlVO1");
System.out.println("Fetched RowCount : "+vo.getFetchedRowCount());
In the if clause, i have checked *!("itemReturn".equals(mode))*.
This condition fails because i have set mode to be itemReturn when navigating from page2 to page1.
Thanks,
KR

11g p2 / bug - select in navigator from database offline object editor

It is no more possible to use the context menu "Select in Navigator" from the database offline object editor (a package body in my case). I got a message "Command not handled".
This appear in all my packages and body.
After restarting JDev and test again I got this message "Error encountered:
The Offline Database file is missing. Please recreate Offline Database "1" with the correct settings.
This object in file ADMINPROCTABLE.type will be unavailable."
Is it a way to correct this ?

I completely reinstall JDev and set it to use subversion ... that resolve the problem and i'm no more in a position to reproduce it.

Filter condition not working when Navigating from Main report to detail

Hello,
I have one report in OBIEE 10.3.4. Below is the filter condition used in Main report:-
(Customer Secondary Organization is equal to / is in BMS OTHER C
AND Customer Tertiary Organization is equal to / is in S&FO )
OR Customer Secondary Organization is equal to / is in MKTG
Also in my detail report I am using the same filter conditions:-
(Customer Secondary Organization is equal to / is in BMS OTHER C
AND Customer Tertiary Organization is equal to / is in S&FO)
OR Customer Secondary Organization is equal to / is in MKTG
Now when I am navigating from Main report to Detail report, then this filter condition is getting overridden by below condition:-
Customer Secondary Organization is equal to MKTG
and Customer Tertiary Organization is equal to S&FO
or Customer Secondary Organization is equal to MKTG
What I noticed is If I rearrange the filters and make it as below:-
(Customer Secondary Organization is equal to / is in MKTG
AND Customer Tertiary Organization is equal to / is in S&FO)
OR Customer Secondary Organization is equal to / is in BMS OTHER C
Then I am getting the filter in detail report as:-
Customer Secondary Organization is equal to BMS OTHER C
and Customer Tertiary Organization is equal to S&FO
or Customer Secondary Organization is equal to BMS OTHER C
It is taking Secondary Organization which is 2nd one in the main report.
Can anyone please help me on this.
Thank You,
Shivam Saxena

Hi,
What you can try is refer the filte condition in the main report to the detailed report with the option--> Filter based on another request.
Or you try creating another intermediate report which will refer the main report filters and pass the filters to the detailed report.
Hope this helps.
Regards
MuRam

Incorrect Navigation from homepage

Similar Messages

Maybe you are looking for