Incorrect Opening stock & closing stock updation in RG1 Register

Hi ,
It's regarding Rg1 register update. As our cut-over date was 31.08.2010.
After extracting for the month of sept. , when no opening and closing stock
reflecting in it, than we realize it .Afterwards we maintain
the closing balance for 31.08.2010 in the table and try to
re-extract it,but there is no change in the sept.figure.After extracing for
October month,we get the values in the column ofopening stock and
closing stock in RG1 register. But for some material it is showing
negative stock and for some as Zero, though physically it is present.
What i found in Rgsum table that the stock quantity are not correct,
it seems that september stocks are not updated in the table also in
J_2irg1bal table ,only october stock are reflecting.
looking forward for your valuable inputs.

Hi,
All the Receipts And issues have been updated in J1I5 for september month.What i also found that in table for
RG23 summary of receipt and issue , the quantities has been updated for the particular month also in RG1
Excise details table all the entry are there for september month.The only problem is on Opening and Closing
balance table for Rg1. here in this , there is no entry for September month,but for october it is there.
How to correct this.
Regards
sujeet

Similar Messages

Opening and closing stock report

Hi,
i have to develop a report in abap of stock (Opening and closing stock) with each material, plant, business area & monthly date wise. I got some fields from mseg like material number, plant, business area but i didnt get fileds like opening stock, purchase, consumption & closing stock
in report fileds should be like
material number
plant
business area
posting date
opening stock
purchase
consumption
closing stock
kinldy help <removed by moderator>
Moderator message: Welcome to SCN!
Moderator message: please search for available information, ask a functional consultant near you.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 21, 2011 3:35 PM

Yes umesh from external 99% of your stock from mvt 101, 501 is very rare case & 561 is not from external source it is initial stock updation which will be done only once when you are going live & later 561 mvt will be normally blocked for use.
You can also sort in MB5B more than one movement type click on multiple selection (that is on yellow arrow icon) & in single value tab enter mvt 101 below that 501.
This will give you report for mvt types 101 & 501 in this way you can also sort reports for more than one mvt type.
Regards
Rang
Message was edited by:
Ranganath Mysore

Opening and Closing Stock -Calendar Day Interval

Dear All,
Regards.I got a requirement where I need to calculate the Opening and Closing stock -Daywise..Did checked the related threads which stated to create 2 Restricted KF's upon Calmonth.Hence i tried the same replacing Calmonth with Calday,but those 2 Restricted KF's are empty at the Query output level!!!!!!!!(Note : 0TotalQtystock shows the Closing stock by default)..It would be really helpful if someone could take time to update on this..
Manythanks
Arun

Hi,
Stock key figures are normally set to calculate closing stock with respect to time. e.g. day end stock, week end stock, month end stock.
To calculate Opening balance -
1. create a new calculated KF on your stock key figure with no calculations.
2. Set exception aggregation as "First Value" for this calculated key figure in the query definition.
3. Use this calculated key figure instead of main key figure.
This setting works for all the time characteristics present in the cube.
Regards,
Anup

Query for Opening And Closing Stock

Hi Experts...
I need a report for Opening and Closing stocks and Goods Receipt and Goods Issue for Raw Materials and Finished Goods and Consumbles ..instead of going for different reports for each we need a combined report which can display for all Raw Materials, Finished Goods and Consumbles and we need it for a specific date range Material type(Raw MAterials,Finished Goods, Consumbales)
and below is the format i needed.
                                                                       RAW MATERIALS /FINISHED GOODS/CONSUMBALES
                        Opening Stock                      Closing Stock         Goods Receipt                  Goods Issue
                         Qty   Value                             Qty   Value                     Qty   Value                      Qty   Value
Item Name
Regards,
Vamsi.

Hi Guys.
I need an Inventory stock report with Item name, Opening Stock,Goods issue Quantity,Goods Received ,Item Price,Location ,(Closing Stock)Total Value.
We need the input by Date Range and Item Group and Location(if Possible) Below is the Code i used to run the report.
Pls Update the Query...
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @Group nvarchar(10)
Declare @Whse nvarchar(10)
Set @FromDate = (Select min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]')
Set @ToDate = (Select max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]')
Set @Group = (Select Max(s2.ItmsGrpCod) from dbo.OITB S2 Where S2.ItmsGrpNam = '[%2]')
Set @Whse = (Select Max(s3.Warehouse) from dbo.OINM S3 Where S3.Warehouse = '[%3]')
Select @Whse as 'Warehouse', a.Itemcode, max(a.Dscription), sum(a.[Opening Balance]) as [Opening Balance], sum(a.[IN]) as [IN], sum(a.OUT) as OUT,max(a.Price) as 'Price', ((sum(a.[Opening Balance]) + sum(a.[IN])) - Sum(a.OUT)) as Closing from dbo.OITM I1
Left JOIN (Select N1.Warehouse, N1.Itemcode, N1.Dscription,N1.Price, (sum(N1.inqty)-sum(n1.outqty)) as [Opening Balance], 0 as [IN], 0 as OUT
From dbo.OINM N1
Where N1.DocDate < @FromDate and N1.Warehouse = @Whse
Group By N1.Warehouse,N1.ItemCode,N1.Dscription,N1.Price
Union All
select N1.Warehouse, N1.Itemcode, N1.Dscription,N1.price, 0 as [Opening Balance], sum(N1.inqty) as [IN], 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <= @ToDate and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription,N1.price
Union All
select N1.Warehouse, N1.Itemcode, N1.Dscription,N1.price, 0 as [Opening Balance], 0 as [IN], sum(N1.outqty) as OUT From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <=@ToDate and N1.OutQty > 0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription,N1.price) a ON a.ItemCode=I1.ItemCode
where I1.ItmsGrpCod = @Group
Group By a.Itemcode
Order By a.Itemcode
Regards,
Vamsi.

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Opening and closing stock balances

Hi
What report can i use to show the opening and closing stock balances of materials for the last 12 months.
Thanks
Vinesh

You can view the report in MMBE.
other than this you can try
MBEWH and MARDH
Also follow the link:
Re: op.& closing stock detail in MM
Thanks
Nisha

Material opening and closing stock for a given day- Tables or FM

Dear Friends
i have to make a report , related to Material opening and closing stock for a given day , i check the T-Code- MB5B ,
it is not giving correct date . is any functional module is available ? . i checked some table like mbew , mard . it is also not giving correct requirement . Please help

Hi
Goto transaction MC.9, Give your Material and,Plant and the date which you need to know the closing stock. Do make sure that in the high and low values you are giving the same date there. I guess no such FM are available for this. You can refer the [Link|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=15856] for some help.
Regards
Vinodh
Edited by: Vinodh_AN on Dec 15, 2010 9:19 AM
Edited by: Vinodh_AN on Dec 15, 2010 9:25 AM

Opening and closing Stock report at Storage location level- date wise

Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
Sam

Do I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam

Functional Specification For Opening And closing stock On Particular Date

Dear Gurus,
I am creating report for opening and closing stock on particular date in which batch and storage location should also be included. I want to know the tables and fields for the same.I have searched the forum and got report on month basis but I want this report on posting day basis.kindly suggest tables and fields. Thanks in Advance

Dear sir,
There are many other colums that client wants to add which are not present in MB5B transaction.columns which client wants to add are as follows...
Material Number
Material Description
Material Type
Material Group
External material Group
Movement Type
Plant
Storage Location
Customer Number
Customer Name
Vendor Number
Vendor Name
Posting Date     Receipt Doc. Number
Issue Doc. Number
Reference Issue Document Number
Opening Stock Quanity
Material Receipt Quantity
Material Issue Quantity
Material Closing Stock Quantity
Value Of Closing Stock
And for this I want tables and logic for the same. kindly provide the solution for the same.

Material wise reciept and Issue report with Opening and Closing Stock

Hi
I need a report,Material wise Receipt and issue with Opening and Closing stock.Is there any standard report available in SAP ?
Or we have to go for Customised Report.
Please reply

Hi,
MB5B gives total receipts - if i click on the receipts i can view the multiple material documents - BUT is there any way to drill down the reciepts or view the breakup of the receipts on the same screen OR is there any other report for this.
Regards,
Laxmi

Inventory opening and closing stock with value report

Hi All,
Is it possible to get details of both opening and closing stock with value of each items of last financial year (2009-10) in inventory report?
Mizan

Hi..
you can try this query
Declare @FromDate Datetime
Declare @ToDate Datetime
set @FromDate =
    (Select min(S0.Docdate) from OINM S0 where S0.Docdate >='[%0]')
set @ToDate =
    (Select max(S1.Docdate) from OINM S1 where S1.Docdate <='[%1]')
select * from
    SELECT T0.itemcode,
    min(T0.Dscription) as 'Item Description',
    min(B1.ItmsGrpNam) as 'Item Group', W1.Whscode, C1.Location,
    (isnull((
        Select sum(isnull(inqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode
        and O1.Warehouse=W1.Whscode
        and O1.docdate<@FromDate ),0)-
    isnull((
        Select sum(isnull(outqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode
        and O1.Warehouse=W1.Whscode
        and O1.docdate<@FromDate),0)
    ) as [Opening Stock],
    isnull((
        Select sum(isnull(inqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode
        and O1.Warehouse=W1.Whscode
        and O1.docdate>=@FromDate
        and O1.docdate<=@ToDate and O1.inqty>0
        and O1.transtype in (20,18)),0
    ) as [Purchase Quantity],
    isnull((
        Select sum(isnull(outqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
        and O1.docdate>=@FromDate and O1.docdate<=@ToDate
        and O1.outqty>0 and O1.transtype in (21,19)),0
    ) as [Purchase Return Quantity],
   isnull((
        Select sum(isnull(outqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
        and O1.docdate>=@FromDate and O1.docdate<=@ToDate and O1.outqty>0
        and O1.transtype in (13,15)),0
    ) as [sale Quatity],
    (isnull
        Select sum(isnull(inqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
        and O1.docdate<=@ToDate),0
        isnull((
            Select sum(isnull(outqty,0))
            from OINM O1
            where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
            and O1.docdate<=@ToDate),0)
    ) as [Closing Stock]
    FROM OINM T0
    INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode
    INNER JOIN OITW T2 ON T1.ItemCode = T2.ItemCode
    INNER JOIN OITB B1 ON T1.ItmsGrpCod=B1.ItmsGrpCod
    INNER JOIN OWHS W1 ON T2.WhsCode = W1.WhsCode
    INNER JOIN OLCT C1 ON W1.Location=C1.Code
    Group by T1.itemcode, T0.Itemcode, W1.WhsCode, C1.Location
) a
where (a.[Opening Stock]
        +a.[Purchase Quantity]
        + a.[Purchase Return Quantity]
        +a.[sale Quatity]+a.[Closing Stock]
       ) !=0
Regards,
Bhavank

Opening and closing stock with sales order and with out sales order

hello,
any body please help me my client want to check opening stock and and closing stock in areport.
material contains batch and some material with sales order and some are with out sales order. my client is asking this in a single layout. please tell me isthere any teport or bapi or function module to get this report.
this is very uregent. and layout is requesting like opening stock, production stock, sales stock and closing stock.
please guide me to get this report.
Thanks & Regads
Bhakta

Transaction MB5B
For sales order related use specila stock as E and use radio button indicator in stock type
For stock w/o sales order, use special stock indiactor as "space' and stock type valuated stock.
to get a perticular month,opening stock/closing stock enter the start date/end date as month start and end date.
See the o/p which will give the stock as required by you

Calculating opening and closing stocks at a plant (on specific dates)

Hi,
I am to develop an ABAP-report. On the selection screen, I'll have plant, material, and a date range (date_1 and date_2). The report should show opening stock on date_1, closing stock on date_2, and then there is more segregation based on movement types (along with both stock-quantity and stock-value). I am stuck at how-to's around calculating opening (and closing) stock on a particular date.
Secondly, transaction MB5B has 3 options : batch stock, valuated stock, special stock ... One of these options uses table MBEW and other uses table MARD ... Which (all) tables will I need to use so as to get both stock-quantities and stock-values ?
Please advise. Thank you.
Regards,

Hi
for second question answer is
you need to consider all batch stock, valuated stock, special stock ... One of these options uses table MBEW and other uses table MARD to get both stock-quantities and stock-values
hope it helps
Edited by: ppkk on Dec 10, 2008 10:58 AM

Table name for opening and closing stock

Hi gurus,
i want table name for opening and closing stock . How to calculate this opening and closing stock in report.
Murali.

Murali,
Check out in OINM, which maintains all the details of the stock transactions..
Hope it might help you..
Regards
Gattu

Incorrect Opening stock & closing stock updation in RG1 Register

Similar Messages

Maybe you are looking for