Incorrect packing status

Hi,
In the delivery document when i pack 3 line items out of 5, the status at delivery header shows ' C ' and at the items which are packed ie those 3 as ' C '. indicating completely packed. This is wrong at the header level because another 2 line items are not packed at all. So, it should indicate ' B '- Partially packed at header level.
Also we have applied as OSS Note to rectify the problem but could not resolve it.
Please help in this regard. We are on ECC 5.0.
Thanks in advance.
Sadhu Kishore

Hi Sadhu
I'm not sure if this is still an issue for you as the post is from January. Nevertheless, it appears that the behaviour is related to the packing control setting in the item category definition (transaction 0VLP). If you set ' ' (can be packed) then if some items are packed the header status will be 'C'. If you set the packing control to 'A' (must be packed) and then only pack some items then the delivery header packing status will be 'B'.
Regards
Michael

Similar Messages

Incorrect Delivery Header Packing Status

Dear Experts,
We did not expect the delivery header level Packing Status to change to "C" until all item were "C". However, the header level field changes to "C" when the first item on the delivery is packed.
Delivery Header Packing Status VBUK- KOSTK = C when the first item of the delivery is packed while there are many itmes to be still packed
Any valuable input on this will be appreciated.
Regards,
Shashidhar

Hi Shashidar,
Please check the customizing for item cat. ZELN for example
> Logistics Execution
> Shipping
> Packing
   > Packing Control By Item Category
    > Item cat.ZELN : ' ' Can be packed        <<<<<
                        A   Must be packed
                        B   Cannot be packed
Please change to 'A' (Must be packed) and try again.
regards,
Ramana

Packing Status at Delivery Header

We are in the process of creating a form that will include the details of the all delivery items packed on a handling unit. We want the output to be triggered automatically when the delivery has been completely packed.
We created a requirement to look at the packing status at delivery header level. There is a packing status field (VBUK-PKSTK) at delivery header level and packing status (VBUP-PKSTA) at item level.
We did not expect the delivery header level header to change to "C" until all item were "C". However, the header level field changes to "C" when the first item on the delivery is packed. I
I looked through the SAP Notes to see if there was something there to address this, but could not find anything.
I then searched the forums and found a message from 2007 saying that you must configure item categories with "must be packed" in order for this to work. I know we do not want to configure our system that way. We have many sites and most do not use handling units.
However, before I have my developer add code to check all statuses at item level prior to triggering an output, I want to make sure this is what has to be done. And I have not missed a note to correct this.
Thanks in advance.

HI,
Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Packing status becomes complete after using Pick HU

Hi Experts,
We use Pick HU for Outbound to pick products from warehouse to packing work center
but as soon as we use pick hu in warehouse order for Out delivery and confirm the WO to pack center
the status of packing becomes complete
which should be ideally complete after we repack the products in to ship hu
is there any thing i m missing to accomplish this?
Regards,
Roopendra

Hi Roopendra
I hope this is Correct as its belong to task and not activity.
And if you see activity OB02 then its has to complete at work center. This is about task.
Pack status on del for picking and not for packing activity.
Regards
Suraj

Packing status and delivery status

What are the fields for packing status and delivery status?

Hi,
Please check tables VBUK (header status) and VBUP (item status).
VBUK-LFSTK ((Delivery status)
VBUK-PKSTK (Overall packing status of all items)
VBUP-LFSTA (Delivery status)
VBUP-PKSTA (Packing status of item)
Regards,
Ferry Lianto

Outbound packing status is "Completed" before we pack in work centre

Hi,
Once picking is completed (source and destination HU is same) immediately system says "packing completed" , in fact the next step is packing.
Is it a right behavior in EWM?
If i use outbound without storage process, how the packing status in ODO would be set as completed without any HU.
Thanks,
Ganesan

Hi Ganesan,
I believe that the packing status is just dynamically determined based on the HU data in the delivery. The status does not consider the process oriented storage control. Therefor I think the behaviour is right.
Best regards,
Christian

Pack status misleading

Dear All
We have scenario of Pick, Pack Stage and Load where in loose items are picked to temporary reusable pick HU (Totes) and brought to Pack work center.
In the Packing station they are packed as per customer specific packaging , Finally staged and Loaded.
Issue is delivery gets the pack status "completed"immediately after the pick confirmation to Pick HU and not based on actual pack completion.
Is there any way to reflect the packing status after completion of packing in the work center.
I could have activated the flag " Do not put away HUs" in the Pack center storage type but we want to track the pick HU's adn the contents at the pack stations until they are transferred to packing cartons.
An extension to above question>>
Unlike the above scenario where the loose items are picked into the pick HU the scenario here is Picking of cartons to pick HU..
How to handle the requirement of Pick HU being with the resource after pick confirmation and the requirement is to just drop the picked cartons at the pack work center.
regards
Saravana

Hi Saravana
You correctly catch
WO creation category makes sense.
For eg..
WO creation category if it's pick path then the pack status not completed after picking
WO creation category if it's pick and Pack then the pack status can have completed status after picking.
This will work for you for you.
WO creation category if it's pick path then the pack status not completed after picking.
Process is just auto WT creation may not happen till it pack. need to check.
only here is first WT is take hu via pick hu from bin to pack bin.
wt 2 >>pack and complete pack step.
wt3 >> create WT for pack to staging and then wt4 load.
if you need any other help please let me know.
regards
Suraj

Regarding field VBUP-PKSTA (Packing status of an item)

Helo All,
Can anybody tell me from where does the field PKSTA in table VBUP gets populated?
This is regarding packing status of item.
Thanks in advance.

Thanks for your reply.
But when delivery is created, the field is populated from VBUP-PKSTA (Packing status).
My question is how entry is made in this table VBUP?
Is it when we create any master data or during any config?
Thanks.

Support Pack Status not updated in System Component Information

Hi Experts,
We have installed ECC 6.0 with Ehp3 and AFS 603 on AIX 6.1 and db6 V 9.1. We recently added the Vistex Incentive and Payback Module and Vistex Global Functions Add Ons. After the base install the Support pack 1-4 were applied for both Vistex components. For IRMGLB the status screen (System/Status) shows the SP highest Level = 03, while in SPAM screen it shows that Support Pack for for the Component IRMGLB is imported successfully.Because of this we can not apply the remaining Support Packs. For the other component (IRMIPM) Support Pack level 04 is correctly displayed.
Any idea what are we missing? Any help is greatly appreciated.
Thanks
Suhail

For future referers, Vistex says its a known issue.
Hello,
It is a known issue but it would not impact any of the functionality.
It can only be fixed in the subsequent release with conjunction with
SAP.
Thanks,
Vistex Support

Incorrect Action Status in Opportunity

Hi,
I have created a new action profile (by copying a standard one), assured the relation to the new opportunity type, maintained conditions etc. In testing:
- no planned activity is generated
- the action status is incorrect
I have double-checked all setting, I cannot figure out what is wrong. I will appreciate your help.
Regards,
Horatiu

Hi Horatiu,
Where exactly you are finding results such as:
no planned activity is generated
- the action status is incorrect
rgds
Hari

Incorrect fault status - why is it not possible to...

We have had a fault on our phone line since last week - VOL051-115******, initially it was a very noisy line which was also killing the meagre broadband speed we normally make do with. When the fault was reported a line test was run which was passed - I assume it just checks connectivity rather than line quality, and the fault was blamed on our internal cabling (which we don't have any of, it's all wireless from the master socket) plus the fault is still apparent when connecting directly to the test socket.
The line has now degraded so much that we do not even get a dial tone (none for the last 3 days) but the fault still blames our nonexistent internal wiring. How can I get this fault status corrected?, if it stays like this nothing is going to be done to fix the real fault. I can’t raise a new fault online because it says there is a fault already on the line which means the line test doesn't even get done so it looks like my only option is to sit in a phone queue for at least ¼ of a hour being charged by the minute because I am forced to use a mobile.

Hi
I suggest that you get back to the Faults dept on 0800 800 151 and inform them that you now have no dial tone in the test socket, they should be able to change the fault location on their system which should progress to Openreach to attend.
Can I also suggest you remove the VOL number from your original post.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Incorrect processing status in PR

Hi all,
We have a situation where the PR is showing the incorrectiong processing status. The user creates a PR from planned order. If the current price is not sure RFQs are sent. After sendign rfq teh PR processing status changes to RFQ. When quote is recieved, user may or maynot update the quote in ME47.
After this th PR is converted to PO. The problem happens is that PR still has status as "RFQ created". The status does not change to "PO created".
Please let me know what could be issue. Thanks.
Regards
AF.

Just check, there is a system message which do not allow converting one PR multiple times. I mean if PR is for 100 qty and you are creating 10 different POs with ref. to same PR for 100 qtys than by default it is allowed and these case system will only give status of the first document.
As RFQ, PO, contracts are ext. docs, PR will keep track of only the first one which is referenced. As you are creating RFQ, system is expecting that you will recieve quote and it will be converted to PO later.
And as you have not switched on these message for not allowing PR to be converted multiple times, system will allow you to create multiple POs.
Regards,
Dakshesh

Incorrect delivery status in sales order

Hi,
Sales order delivery status is not delivered though i have done delivery and billing and so how can i correct the overall status as completed in sales order
Regards
Ravi

Check in the transaction: V_UC incomplete delivery.
If the deliveries are appearing after you have marked check document flow update.
Also cehck for the deliveries whether it is billed fully or there are some of the sub items which are yet to be billed.
regards,
Amlan Sarkar

Incorrect Vacant status

Hi Nakisa experts,
I'm trying to display the correct icon for vacant positions in OrgChart (Nakisa 3.0) but all the positions are taken as occupied positions but there are vacant positions (at least in PPOME). I've checked some xml files but I couldn't find where I have to do necessary changes to get the correct vacant status. ¿Can anyone help me, please?
Thanks in advance,

In the early build versions of 3.0 there was a problem with how vacancies were determined.
This solution varied between the Live and Staged solution but each was resolved by an update to the Add On (to include 2 new function modules for Position Vacancy).
For 3.0 product version see OSS note 1589536 [VSN 3.0 SP1 ABAP Add-on required from some VSN 3.0 builds|https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1589536&_NLANG=E]
3.0 SP1 does not have this issue and SP1 is available on SMP:
Software Downloads
Browse Our Download Catalog
SAP Solution Extensions by Partners
SAP Talent Visualization by Nakisa
SAP Talent Org Chart
SAP Org Visualization 3.0
Regards,
Stephen

Incorrect warranty status

i have purchased my hp pavilion (p018tu) laptop on 6th of feb 2015 , but now as i am checking my warranty status it shows standard waranty ends on 11/15/2015. as it would be rightly end to be on feb of 2016.
so help me on this.

@vibesmorande ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Thank you for visiting the HP Support Forum.
I work for HP. However I speak only for myself, not for HP nor anyone else

Incorrect packing status

Similar Messages

Maybe you are looking for