Incorrect patch level info

following the info provided in this thread to patch to 10.2.0.5:
patch to 10.2.0.5
I installed 10.2.0.1, which created the repository db:
SQL> select * from v$version
2 ;
BANNER
Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Prod
PL/SQL Release 10.1.0.4.0 - Production
CORE 10.1.0.4.0 Production
TNS for Linux: Version 10.1.0.4.0 - Production
NLSRTL Version 10.1.0.4.0 - Production
The readme instructions (pointed to in the previous thread) for patching to 10.2.0.5 GC says, "7.If your 10.1.0.5.0 database housing the Grid control repository does not have CPU Jan 2008 patch 6826532 applied then make sure that you apply this patch or if you have applied latest CPU Jan 2009 patch 7592360 on your database housing the Grid control repository then you need not apply the old CPU Jan 2008 patch 6826532."
Where did 10.1.0.5 come from? Can I not directly upgrade from 10.2.0.1 GC to 10.2.0.5? Do I need to patch to a intermediate GC to get that 10.1.0.5 repository?

In your case this is not needed becuase you have 10.1.0.4 database
Follow the rest of RN instruction and upgrade the oms to 10205

Similar Messages

Patch Level Info

Hi All,
Currently we are on SPS 14 (Patch #7) for Java and Patch #3 for KMC. How to look for this info from portal? Now we are planning to apply SP stack 16. This will push up the current patch levels. Is there any way we can find the patch level info for SPS16?
Please suggest.
Regards,
Subashini.

Hi Subhasini,
If you are using the EP in Netweaver 2004s or later, The portal version page under System Administration -> Support does not exist anymore.
Solution:
For finding out the version of installed products, launch the default page of the Web AS (http://<host>:<port>) and navigate to the "System Information" page. This page shows a table called "Software Components". For displaying the versions of all installed software and development components, click on the link "all components" in the upper right corner of this table.
With Regards,
Laksh.

Incorrect kernel patch level

Dear Experts,
I just upgraded kernel patch level to the latest one, i.e. 254, however the EWA report still read the old patch level (Your SAP kernel release (release 700, patch level 254) is not up-to-date).
Do we have to upgrade the ST_PI and/or PI_BASIS, the status is as follow:
SOLMAN:
PI_BASIS    2006_1_700   0008   SAPKIPYM08
ST-PI           2008_1_700 0000
Satellite:
PI_BASIS    2005_1_700 0010   SAPKIPYJ7A
ST-PI           2008_1_700 0000
Please advise.
Thank and Regards,
Rudi

Hi,
This "outdated check" is based on the compiling date of the
'disp+work package' of the kernel. The rules for how many days mean
outdated depend on the kernel release and the ST-SER Release and SP
running on the Solution Manager.
Please find below some corrections that extent the rules for beeing
up-to-date:
1076235 - RED Rating in Software Configuration, Kernel 700 old
1301137 - ST-SER 2008_2 SP02: Further Corrections
1304151 - Service Assistent: Adjustments for Kernel Check
You may want to have the latest ST-SER version in order
to ensure that the latest corrections are implemented in your system.
Hope this helps.
Cheers
SH

How do I check if I need SAP GUI 7.10 Patch-Level 7?

Hi,
I have installed SAP GUI 7.10 client.
After restarting the PC, I tried to install the Patch-Level 7 but I got the message:
This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not yet installed at all.
My version for the SAPGUI installer is 2008.0.0.187
From Windows, I looked at the version for the installed file saplogon.exe, it is 7100.1.0.1027.
Does anyone know if my SAPGUI would require Patch-Level 7?
Thanks.
HY

Thanks for replying.
This is my SAP logon info, do it looks alright?
Release: 710 Final Release
File Name: saplogon.exe
File Version 7100.1.0.1027
Build: 0
Patch Level: 0
These are my installed component. Could it be that none of the below components need to be patched?
1. SAP GUI Suite
2. R/3 Add-on
3. General Add-on
4. Legacy Components
5. CRM Add-on
Edited by: Han Yang Lee on Jul 9, 2008 4:39 PM

How do I see the Kernel patch level in Java ONLY instance?

Could someone please tell me How do I see the Kernel patch level in a Java ONLY instance?
In Abap, it is simple!
In Java I see in the System Info: Kernel Version: 7.00 PatchLevel 108458.44
BUT that doesn't correspond to the real patch level which I can see when I do disp+work which gave me 111

Hello Yechezkel,
I am not sure whether the patch number you are looking for is available.
Typically you can use "-v" to display the patch level of SAP kernel programs. When I run "jcontrol -v" or "jlaunch -v", the patch number is blank (at least on the 6.40 release I checked)
The SP level should be able to tell how current the Java instance is updated, especially for NetWeaver 7 systems always patched with JSPM stack.
Best regards,
Victor

Kernel upgrade to patch level 196, ECC 5.0, MSCS resource issue.

Hi,
We have 3 system landscape DEV, QAS & PRD on win 2003, oracle 10G, ECC 5.0.
Our PRD system is on MSCS with CI on node A and DB on node B.
Recently I successfully upgrade kernel off DEV & QAS system to patch level 196 of stack 18.
When I tried to upgrade the kernel of PRD system one of the cluster resource drive (The drive contains the usr folder) is automatically moving from Node A to Node B and I got the error u201Capplication server shut downu201D. We donu2019t have additional application server in the landscape.
Please suggest the solution.
Regards,
Rajesh

Hi Juan,
How are you? Thanks for your reply.
We are using ECC 5.0. I have found more errors in dev_w0 as follows,
ERROR => ShmCreate( ATTACH 62, 85588600) failed 1 [mpixx.c      843]
ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 3556]
in_ThErrHandle: 1
ERROR => tskh_init: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c   9621]
Info for wp 0
stat = 4
reqtype = 1
act_reqtype = -1
rq_info = 0
tid = -1
mode = 255
len = -1
rq_id = 65535
rq_source = 255
last_tid = 0
last_mode = 0
int_checked_resource(RFC) = 0
ext_checked_resource(RFC) = 0
int_checked_resource(HTTP) = 0
ext_checked_resource(HTTP) = 0
report = >                                        <
action = 0
tab_name = >                              <
LOCATION    SAP-Server sapcigrp_ECP_00 on host sapeccprddb (wp 0)
ERROR       tskh_init: DpInitMpi
TIME        Sun Nov 16 05:13:07 2008
RELEASE     640
COMPONENT   Taskhandler
VERSION     1
RC          17
MODULE      thxxhead.c
LINE        9806
COUNTER     1
PfStatDisconnect: disconnect statistics
Entering TH_CALLHOOKS
ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
TrThHookFunc: called for WP dump
ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed hxxtool3.c 254]
Entering ThSetStatError
Entering ThReadDetachMode
call ThrShutDown (1)...
***LOG Q02=> wp_halt, WPStop (Workproc 0 4000) [dpnttool.c   357]
Please suggest the solution
Thanks & Regards,
Rajesh

Problems installing SAP GUI 7.1 patch level 4 for Bex Analyzer

Hi all,
I have a problem installing the SAP GUI for BW - running office 2003, have tried to install without success. The old Bex tools seem to work, but not the new ones and when opening any of the tools report designer or web application designer I get the error : System configured incorrectly. The new functionality in Bex Analyzer do not respond when clicking on the icons.
Thanks,
Dirko

Hello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven

R/3 Patch level for SAP BW 3.5

I all could you send me information about the minimum sap r/3 patch level for BW 3.5?
thanks a lot...

Hi,
You would find the info on http://service.sap.com/instguides based on the OS and the database.
Bye
Dinesh

Kernel Patch level in JAVA Engin

Hello All,
I have planned to upgrade the kernel for JAVA engine (Version 640) and checked for the patch level. It appears as release 640 and i am not able to find the patch of the kernel(tried in system info page and jalunch -v option). Later I came through a thread in this forum which stated there is no patch level for Java Kernel. Is this right? If this is right then how do we upgrade the kernel for Java engine
Kindly clarify
Regards,
Anand

Hi,
In Java, kernel are identified in SPS not in terms of patch level like in ABAP systems. so whatever will your SP stack level of your portal, the same will be the kernel level of your portal.
So if you want to upgrade your portal kernel alone, you cant. You have to upgrade your whole Portal SPS to take your portal on new kernel and SP stack level. Latest SPS Available in the market place is 24 as of today.
With Regards,
Saurabh

How to see list of bugs to be fixed in future patch level?

It occurs often that the client needs to upgrade due to one application error, but after upgrading they discover more application errors in the latest patch.
How to see SAP notes for bugs to be fixed in future patch level for CA or US localization only?
This is the scenario: Client was upgraded to 8.8 SP0 PL11 and they discovered a bug (SAP note 1475645). SAP note 1475645 was released on 04.06.10 when the upgrade was in testing. SAP intends to fix it in a future patch, therefore it is not included yet in any info file. It was not found in testing and unfortunately the client found this bug in the live upgraded database.
It would have been good if before upgrading the live database I could have found this note and advised the client of the workaround.
I tried the notes search but this returns 821 notes.
If I search #8.8 program error# or #8.8 application error# I do not find all relevant notes. The reason is that the writing of the notes is not consistent - Note 1475645 does not contain #8.8#.
If I search using category - program error, search for: SAP intends to provide a patch
and search method: phrase, I get 821 notes.
They are in order of last change date which is good but still, this doesn't work because a clean up is required e.g...Note 1477578 still says "SAP intends to provide patches' even though the patch has been released already (PL12) and I have already reviewed the info file.
It would be very helpful for both support and upgrades if the SAP notes search can be improved:
- refine search by version i.e....2007 or 8.8
- refine search by localization i.e...those country specific could be filtered out.
- refine to date range i.e...last change date
- clean up text on note when patch fix is released
- write notes consistently so that same search method can be used
Alternatively, please provide the info file for planned future patches. That way I can check what application errors are not fixed and exist in the patch I am upgrading to.

Hello Maeve and Archie,
I have gone through your posts in this thread and I would like to give you some insight into what we as SAP are doing to improve in the above mentioned areas.
First of all we are continuously improving the testing on patches that we release to the market, to ensure that we are not introducing any new defects into the product. However as you have mentioned, even through the rigorous testing process that we have at place, the fix in one place might touch the functionality in other place and go to the market unnoticed.
To make sure this does not happen we are continuously monitoring all such cases and following up on them. This iterative process has ensured that there is a minimum of problems that are released to the market.
In addition our policy for patch content makes sure that the cases that were identified in the market are fixed in the first available patch.
For details on our Quality assurance you can view the session "Understanding SAP Quality Assurance" delivered by Jaroslav Brutenic our QA team leader. It can be found in the Development tab of the[ PKOM 2010 page|https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705765&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&_OBJECT=011000358700000101242010E].
In regards to the Note search for solutions delivered via patch, the methodology that we use is the following:
1. product defect is identified and scheduled to a future patch in our internal systems.
2. note is created that describes the defect and the solution that will be delivered via patch
3. once the patch containing the fix is delivered onto service market place the note is attached to the "Patch overview Note" with the name of the patch.
Therefore the notes that do not have the overview note attached are the ones that are already identified but not yet delivered in a patch.
Lastly, we are currently working on improving the patch info file to provide a better overview of the defects that were fixed in the current and previous patches. Please let me know in case you are interested in reviewing and providing feedback, I will e-mail you the file.
In case you have any additional questions please let me know.
Best Regards
Martin Han
Global Development Support Lead
SAP Business One Global IBD

List of features of new Patch level

Hello experts,
Can you advise how to find list of features of new patch level, would be great if someone shares the link.
Attached is one such sample. I am looking for features of PL 5 and 6 of 9.1
Thanks
Deepak

Hi both,
besides these info files or the corresponding overview notes which comes with every patch delivery, I just can recommend to check the Top Fixes document, highlighting the most important corrections which are being delivered in patches:
SAP Business One 9.1 Top Fixes on SAP PartnerEdge; SAP Business One 9.1 on Customer Portal
SAP Business One 9.0 Top Fixes on SAP PartnerEdge; SAP Business One 9.0 on Customer Portal
SAP Business One 8.82 Top Fixes on SAP PartnerEdge; SAP Business One 8.82 on Customer Portal
hope this helps,
Peter

How and where to check Patch level in XI

Hi,
Can any one let me know how and where to check Patch level for XI systems.
Ex: 14SAPXIAFC17P_14.sca
Also pls provide me with the procedure for applying above patch.
Shavali

Hi Shavali -
http://<host>:<j2ee_http_port>/sap/monitoring/ComponentInfo
also
http://<host>:<j2ee_http_port>/sap/monitoring/SystemInfo for core system info (J2EE or JVM patch level, etc.)
BTW, you need <i>SAP_J2EE_ADMIN</i> role for this.
Regards,
Jin

Patch Level Report Extraction

Hi there,
From an internal auditors' stand point, is there a way to check patch level of a SUN Solaris 10 servers? The goal of this check is to ensure that the servers are up-to-date with all latest patches.
Thanks,
V

Hi,
you can use the patchdiag tool (available by sun.com - download).
This tool require the patchdiag.xref file available on http://sunsolve.sun.com/pdownload.do?target=patchdiag.xref
for more info see http://sunsolve.sun.com/search/document.do?assetkey=1-9-240587-1

Patch level & SPS...

hi all,
Our server Support pack Patch level says..109886.44.
How do we calculate the SPS level with this..? Is there any hierarchy of patch level how we can calculate the stack level with this information ?
I am confused to calculate the patch level with this info..please help.
Thanks!,
Addy

Yoganand,
I don't have access to the backend to check with SPAM / System - Status or other ways..
As a portal consultant, how can i check thru the Portal or Java tools ?
( Is it only java home/system info ? )
When i was checking a trace file in OS level ( Solaris ) i see Kernel version 7 and Patch level 109886.44 In J2ee engine homepage it shows version 7 SP14 only.
My question is about the Patch level ??
Please clarify my doubt.
Thanks for your time..
Addy

How to find the patch level of a BI 7 system.

Hi Experts,
I am not able to add navigation attributes to an info cube in BI 7 system ....does the patch level applied to the system effect this functionality ? if so how can we upgrade the system?
How can we find the patch level details of a SAP BI 7 system ? The release notes doesnt give any information in regard to the patches. Is there any direct way of getting this information by ourselves without contacting the basis team.
Kindly let me know your valuable suggestions.
Thank you and much appreciated.
Regards,
Sharanya.

Hi Bala and Teja,
Part of my question was answered , Thank you for your help.
I see that the patch level is 17 on our BI 7 system..........but does it effect the functionality to add a navigational attribute to an info cube?
Can you suggest me any possible reasons for this issue, and also any solutions if you have please.
Thank you and much appreciated.
Regards,
Sharanya.

Incorrect patch level info

Similar Messages

Maybe you are looking for