Incorrect plus/minus sign in MB51

Hi All,
In MB51 report we are getting an incorrect minus sign in the display. When I run the report for mvt type 102 the quantities are displayed in RED color but the minus sign after it is missing. The sustem is considering it as plus.
What could be the problem?
Regards,
V S

check SAP notes.
e.g. OSS note 1317700 Incorrect plus/minus signs in display for transaction MB51
and  Note 1319863 - Incorrect plus/minus signs in display for transaction MB51
if you cant find any that fits to your system, then open an incident at SAP yourself

Similar Messages

  • JTree not showing plus/minus signs

    Hi,
    I'm having a strange problem with JTree when implementing my own DefaultTreeCellRenderer: the renderer is shown correctly, but the plus and minus signs are gone!
    My getTreeCellRendererComponent implementation actually creates a new JPanel and returns it instead of the default one. Can that be the problem? How can I make these plus/minus signs come back?
    Thanks, U

    I have seen something a little different on my CustomCellRenderer where the plus minus sign is replaced with some default arrow icon and where it comes from I have no clue. I basically have a 3 level deep tree and its at the B level where this icon appears.
    http://www.matthewscorp.com/images/JTreeError.jpg
    For the life of me I can't figure this one out. I have tried all ideas like set all the renderer icons or the LAF properties icons and still this blue arrow appears. Any ideas would help on both mine and the original poster.

  • Accordian panel with plus and minus signs to indicate state of panel

    I want the text to show [+] next to the title of the panel when it is collapsed and [-] when it is expanded
    just like http://www.reddit.com/r/indesign/comments/1jewqq/custom_kerning_applied_to_a_single_charac ter/
    the comments on this page can be expanded or collapsed by clicking the plus or minus sign
    how do i do this?

    I've started filling the accordion with my content and the
    cookie works fine. But I see some things I'd like to have changed
    if possible?
    a) When I load the page all accordion panels flips open at
    the same time and they stay open until the page has loaded. It's
    probably not visible in the demo because it's only a few bytes to
    load there. After the page has loaded the cookied panel stays open
    and the rest of the panels close. Is it possible to hide the
    loading of the panels somehow? This is kinda messy right now.
    b) I'd like to use the cookie to control the panels but only
    during the current session. When a new session occurs I'd like to
    start with all panels closed a) (or use the script that states
    default panel). The standard accordion use a small script to set
    the default open panel. I tried modifying this script but it looks
    like the accordion is following the laws of the cookie and is now
    ignoring this script.
    Panel 4 set to be default (0, 1, 2, 3):
    <script type="text/javascript">
    var Accordion1 = new
    Spry.Widget.Accordion.prototype("Accordion3");
    </script>

  • Plus/Minus Squares in .chm file

    Hi Everyone...
    Two questions, thanks in advance for the help.  FYI:  Using RoboHelp HTML, ver 8 with a project that has multiple folders and topics; also using it in a shared environment with multiple users, using RoboSource for version control.
    1.  Any ideas as to how I can enable the "Plus/Minus Squares" option in HTML Help - Advanced Settings?  I want to generate a .chm file that has the plus and minus signs next to the book icons.  I found the settings in the HTML Help Options - Microsoft HTML Help but they're grayed out.  Trying to figure out how I can enable them so I can generate the .chm with the signs in help file output.
    2.  I have two topics that "disappear" everytime I go out of RoboHelp and come back in.  I need to import them each time I open the project.  I can see them in RoboSource.  I can't find any way to unhide them -- I swear there was a way to just "unhide" them from RoboSource that I've used in the past but can't remember how I did it (senior moment, that won't end....).
    Thanks!!

    Hi there
    I'm not sure exactly why, but this goes back to the eHelp days. In their infinite wisdom, the developers decided that you would never ever want Plus Minus Squares unless you FIRST wanted Lines From Root!
    So enable the Lines From Root and the Plus Minus squares should become enabled.
    On the topics you don't see, I'm wondering if at some point you saw a message about files being outside the project and therefore not being shown in RoboHelp. If so, there was a dialog with a check box you could select that says "Don't show me this again". And sure enough, you aren't seeing the message that alerts you there are missing files.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcererStone Blog
    RoboHelp eBooks

  • Quick selection tool always contains minus sign

    I am obviously not a very experienced Photoshop user and I have a question about the Quick Selection tool. I am using CS6 on a Mac with OS X 10.9 Mavericks.
    I watched a couple tutorials and my system is behaving differently. In the tutorials I watched, when the quick selection tool is chosen the "brush" contains a plus sign. If too much area is selected, that can be corrected by holding the option/alt key and this changes the brush to a minus sign. On my computer, when I select the tool the brush always contains a minus sign. I think the tool is working OK but I wonder why I never see the plus sign inside the brush.
    Please advise.
    Thank you.

    Be sure the tool isn't set to subtract in the options bar. Otherwise, try resetting the tool by right- or control-clicking the blue arrow just to the right of the tool preset (under the blue PS icon in the below screenshot) to reset the tool.

  • Plus & minus keys not available in address panel

    I just started using Mac mail and was able to add new addresses to the address panel, but lately the plus and minus signs are not available in the address panel window. How do I get them back? Thanks.

    Hello, and welcome to the Discussions.
    What address panel? In Mail you can add the address of a sender of and email via a command, but to otherwise add an address in the Addressbook, you must open the separate Addressbook application. The panel of AB reached from within Mail only support getting an address that is already in the AB.
    Ernie

  • Cen't delete user--minus sign greyed out

    I'd appreciate help with the following: I'm trying to deleter a user account. I can click on the user account and highlight it, but only the plus sign is in black--the minus sign is greyed out. I have unlocked the lock, so that's not the problem. Can anyone help?
    Many thanks!

    If you have Fast User Switching turned on, you cannot delete a logged in account from the Accounts pane of System Preferences. Switch to that account and log out of it, or restart the computer.
    (19744)

  • Datasource has a minus sign

    Hi,
    I created a datasource on R3 and saw it from RSA6. I checked the Datasource Overview and saw it is there, but the sign for the activation column is a minus and not a plus. I tried to assign datasource to an infosource, and the datasource did not show up in the list of the available datasources.
    How can I fix this? I was able to run RSA3 on R3 and got some data. It's the BW side that it can't see the datasource.
    Thanks

    Hi Sat,
    I just created it and tried to assign it right away but initially I didn't see it either, that's when I tried to check RSA6, RSA3, Datasource Overview, etc. I am sure that it is not being used elsewhere.
    I compared it with other datasource and it has a minus sign instead of the green plus sign.
    Thanks

  • I transferred data from my external hard drive to my restored Mac Book Pro via migration assistant and now my external hard drive in time capsule has red minus signs. How do I get rid of that without getting rid of any of my data?

    I used Migration Assistant to transfer my data from my external hard drive via Time Capsule to my restored Mac Book Pro. When I now go into Time Capsule I there are red minus signs in the corner of all the folders that are contained in my back up. How do I get rid of this and access my previous back-ups?

    Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
    You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
    ..Step by Step to fix your Mac
    Another method is to copy the entire folder, then change it's permissions.

  • I increased my font with zoom for the first time & got it too large. It will not decrease using Control & minus sign.

    I use Firefox 4. Windows XP. I have tremors & must have accidentally clicked on something that made it open up with weird colors like it was in safe mode. It was in 8-bit so put it back on 32-bit and 1280 x 1024 pixels. Then the font was so small it is almost unreadable. Tried to change it in Firefox Tools, Options, & Content. This did not work. I then used Zoom after checking in Help but got the font so large I can't view my email right. It will not decrease when trying Control with the minus sign as suggested.

    Did you change the resolution in Control Panel > Display ?
    What is the native resolution of your video display (monitor)?

  • HT5137 I updated to ios7.0.2, when I double click on home button it brings up an app list but when I hold my finger on an icon it won't show any with a minus sign, is it no longer necessary to close apps?

    In ios 7.0.2, when you double click the home button it brings up the icons but won't allow you to show them with minus signs, is it no longer necessary to do this?

    jim96776 wrote:
    is it no longer necessary to do this?
    It was never necessary except in certain unusual circumstances.

  • Iphone 5 - can't delete albums in the albums no minus sign when in edit

    I need to free up storage on my Iphone 5...when I am in ALBUMS ...I chose EDIT and NO MINUS sign appears to the left.  I have old photo albums from a blackberry torch and photos from various camers got loaded up I am guessing through Itunes on a PC that no longer works.  I do not want these photos on my phone I have them stored on a external drive.  I love my phone I just don't want all these darn photos taking up so much room.  What the heck can I do??? ahhh! HELP

    You need a 3rd party iPhone file browser such as TouchCopy. See: https://discussions.apple.com/docs/DOC-3141. This covers more than photos, but it should still be useful.
    Note, however, that if the photos were taken with a higher resolution camera than the iPhones the images that you copy back to your computer will be lower quality than the originals, as images in the Photo app are optimized for the iPhone's screen.

  • Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps wit

    Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps with ios7

    Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past.  With the new operating system you also swipe downward to get the search bar to find an app

  • Minus Sign in front

    Hello all,
    I have a requirement where in I need to bring the minus sign in front for the amount field in ALV Grid Display.
    I used the FM CLOI_PUT_SIGN_IN_FRONT, but after I pass back the values, the sign gets set at the end. Moreover, I cannot create a character filed because the business might want to do sum on it.
    Please advice.
    Regards,
    Salil
    P.S. the below piece of code
    DATA : gv_bill_rev  TYPE string,
             gv_balance   TYPE string.
      LOOP AT gt_master INTO gs_master.
        gv_bill_rev = gs_master-bill_rev.
        gv_balance  = gs_master-balance.
        CLEAR : gs_master-bill_rev,gs_master-balance.
        CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
          CHANGING
            value = gv_bill_rev.
        CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
          CHANGING
            value = gv_balance.
        MOVE : gv_bill_rev TO gs_master-bill_rev,
               gv_balance  TO gs_master-balance.
        MODIFY gt_master FROM gs_master INDEX sy-tabix
                                        TRANSPORTING bill_rev balance.

    You can directly specify an edit mask for output.
    Field EDIT_MASK in the field catalog is a 60 character field in which you can specify an edit mask.
    fieldcat-edit_mask = 'V___.__'
    The V at the left indicates that you want the sign to appear at the left.  The _ will be replaced by the values of the number.  Put as many underscores as required.  You may also want to specify commas (,), if desired, for thousand's separators and a period (.) for the decimal point, if needed.
    Alterntively, if an appropriate conversion exit exists to put the sign in front, you can assign the conversion exit in the field catalog table.
    Field CONVEXIT in the field catalog can be used to specify the name of the conversion exit.
    Brian
    Edited by: Brian Sammond on Jan 27, 2009 8:08 PM
    Simplfy example edit mask because forum was displaying it funny

  • Minus Sign in the Downloaded DME file using F110 Transaction

    Hi All,
    From the F110 Transaction I navigate to the DME Administration from the menu bar in order to download the DME file into my system. I could open the txt file that is downloaded. Now my requirement is to add a minus sign to the invoice amount of the txt file.
    I tried debugging the program to find out where the data is populated but was unable to. I can see the FM GUI_DOWNLOAD that downloads the file but the internal table contains hexadecimal data.I don't understand how this is converted to the text data.
    I'm unsure of what to do.... Any body has any suggestions.
    Regards,
    Shipin Paul

    Hi Anmol,
    Your answer helped me a lot. I am really thankful. But my issue is not solved.
    I went to the DMEE Transaction and gave the correct format and the tree type as input.
    Inside the format i went into the amount element as you have mentioned and included an exit module with the respective coding.
    Then i execute the transaction F110 with the Run date and Identification.
    I then navigate to the menubar Enviroment->Payment Medium->DME Administration so as to download it into my system as notepad.
    I select one of the entries and press the download button. But it does not stop at the exit which i included in the DMEE Transaction
    even though i have created a breakpoint there..
    Do you have any idea about this.
    Regards,
    Shipin Paul

Maybe you are looking for