Incorrect Printing

I'm using CS3 Suite and Windows 7, but this problem developed when I had XP. Whenever I print a pdf file (or InDesign) the product is not centered vertically on the page, but starts about a quarter of an inch or so from the top of the page and has a large margin at the bottom. It's centered horizontally OK. I get correctly centered prints using other programs like Word. I have an HP printer and their tech support says all my printer settings are correct.
With things like business cards and labels created in InDesign the print no longer matches up to the cards or labels. Does anyone know what is wrong?
Keith

The printer has borderless printing capability. The box is not checked.
Printer settings:
Paper Options:Size is Letter
Resizing Options: Print Document On Letter, scale to fit
Print Quality: Normal
Margins: There is only an unchecked box for Minimize Margins.

Similar Messages

Incorrect Print Parameter

Dear all,
I get the following error msg Incorrect Print Parameter when executing an ABAP Program Variant in a process chain. Why is it doing a print and what does this msg means? any insight?
ohya, the abap program DOES NOT call a printer function... its a Z*

1. You can try reinstalling Printer drivers.
2. Reconfigure printer on client machine
remove printer -> add printer -> local
3. Check the RDS server, Whether Printer redirection is enabled or not,
host machine: Computer configuration -> windows components -> remote desktop services -> remote desktop session host -> printer redirection
set "use remote desktop easy print printer driver first" to disabled
Restart client machine
Regards,
Manjunath Sullad

Incorrect Print Driver?

Recently, we began having problems printing a barcode label through a SATO printer. Essentially, the font is wrong, causing the barcode to be unreadable.
Basically, whenever we RDP from Win7 or a thin client (I say newer, but we have only tested on one), we seem to be getting the wrong print driver for our SATO printer. I tried searching around to find out how RDP decides what driver/settings to use, but have
not had much luck.
We have tried the following scenarios:
Print directly from XP: works
Print directly from Win7: works
Print through Citrix from XP: works
Print through Citrix from Win7: works
Print through Citrix on thin client: works
Print through RDP from XP: works
Print through RDP from Win7: fails
Print through RDP from thin client: fails
Print through Citrix from thin client (Same one): works
What could cause this behavior, and how do I fix it? Not using RDP is not an option.
Update:
I tested at my local site with a thin client, and it works. So now, one site's thin clients do not work, while another's do.

At my site, the server is running Windows 2008 R2.
The printer is not redirected. It is a shared printer installed on the print server (or in the testing scenario shared from my laptop, but same results). Regardless, any way I look at it, the driver is SATO CL412e. When I go into the About
tab I see the same version and build number as well.
This is why it is confusing. From everything I know to check, the print driver is exactly the same. However, the behavior definitely is not. How is it that when I RDP from my laptop (Win7) it somehow uses what appears to be a bold font,
but when I do so from literally any other scenario it is correct? In the case of the other site, even the thin client is incorrect (same behavior as Win7 RDP to server).

Incorrect printing of double sided pages on Officejet Pro 8600

When I print a document (generally from MS Word 2010) and ask it to be printed on both sides, the HP8600 gets it wrong!
(I had the same problem with my previous Officejet 8500). It prints page 1 on the first page BUT it prints page 2 on the next piece of paper on the same facing side as for page 1. So the back of page 1 is blank!! This is quite frustrating as I often want to print a long document on both sides of the paper and get the pages correct! So all the ODD pages are on the facing side and all the EVEN pages on the rear. The 8600 doesn't do this, nor did the 8500. I think when I print it using the Adobe reader and PDF documents it gets it correct. So it may be an inter action between Word, and the HP 8600 driver etc... Any ideas to correct this. I have only had the printer just over 4 months.

I used a Word document that was 3 pages long and printed it from MS Word 2010 and it printed incorrectly (page 1 on sheet 1 side 1, page 2 on sheet 2 side 1, page 3 on sheet 2 side 2). Then I saved it in PDF and printed from Adobe Reader and it printed correctly. But I noticed that Word printed it in reverse order whereas Adobe printed in normal order starting from Page 1. So I looked in Options/Advanced/Printing in Word 2010 and there was a box for Print pages in reverse Order that was ticked. So I un-ticked this Print pages in reverse order and re-printed from Word and lo and behold it printed it correctly! It looks to me as if Word has a 'bug' (sorry MS undesired feature) that when printing in reverse order sometimes gets the pages incorrect. It is useful when printing long documents to print them in reverse order as they are in the correct order with page 1 on top. But eh oh I will leave this off and see whether the problem disappears. But many thanks for your interaction and getting me to investigate. 'Praise the Lord' for forums.

Incorrect print head

Canon printer MG5370 unable to print with message given: UO52.
A 15 months old printer should not have this problem.

A lot of Canon printer’s users come across with the error message, “U052 This type of print head is incorrect.” It is a very common error on Canon printers and is fairly easy to troubleshoot.
There are two different scenarios related to U052 kind of error message.One is where the print head is not installed at all and then it is giving the ‘U052 This type of print head is incorrect’ error message.
And, the second scenario is where the print head is installed nut it is not functioning properly or probably not working at all. The below section will show step by step troubleshooting of both the scenarios.
Step By Step Guide to Resolve “U052 This type of print head is incorrect.”

Incorrect print orientation

I have a HP 7610 printer. Over the past week I try to print in portrait and the output is landscape and vice versa. I have checked Page Setup settings and the problem remains unresolved. The problem is the same with my MBA and iMac.

Also, just tried to print from another MBA, same problem.
That points to the image file itself. The orientation tag that is added by the camera appears to be incorrect. Where are these photos from? Were they edited in a 3rd party editor?
What orientation do the photos take when dragged onto a blank Safari window. Correct or incorrect?

Incorrect Printing in Classic - Correct in OS 9

I use TopDown as a flow chart program. I can modify the flow charts in Classic & save them. However, when I print the document only text is printed - all the connectors and boxes are not printed. If I try to print to a file the .ps file is grayed out and is not visable from the finder or terminal.
If I start up in OS 9 I can open TopDown and print the document correctly and also print to a file correctly. When I restart in OS X I can open the .ps file in Preview, see it is correct, and save it as a .pdf
For what it is worth I am printing to an HP LaserJet 4050N.
Any suggestions
Power PC G4 Mac OS X (10.4.7) 1.25 GB RAM

Hi, Stanley. I find that the shareware "printer driver" (Chooser module) PrintToPDF works nicely for me in Classic mode, enabling me to create a PDF file directly from any Classic application using the Print command. I can then open and print the file in Preview or Adobe Reader. For me, this isn't a workaround for a buggy program or hardware, but merely a convenience when I want to save a file as a PDF rather than in the native format of a Classic program. But it would serve your need nicely if you can't find a cure for whatever ails TopDown.

Incorrect printing of Unicode characters

C5180 prints some unicode chars (0x2283 and 0x25A1) as if combined with a carriage return.
On screen the line looks fine, but on my printer they are printed at the beginning of that (current) line.
I use them in a Java program and don't see where the error lies: Windows 7, Java 7 or HP. (3 changes in one)

Hi,
It is a printer issue. The printer needs to be configured to support the Chinese chanracter set.
Normally when we are able to view the chinese characters properly in the print preview but not properly displayed on the output it is surely a printer problem.
This kind of problem we faced many times.
Thanks
Ram

Bad or incorrect printer driver in SL

I have a network setup that includes a Fedora 11 box sharing my HP 5610 printer via CUPS. The Fedora box can print to the printer without issue. However, when I try to print from my MBP running SL, anything B&W doesn't print, it just spits out a sheet of paper, and anything color will only print magenta, and in the upper corner of the page. I'm fairly certain this is a driver issue with SL (although I can't prove that, I only have two computers right now so no way to test it), but I don't know how to solve it. The Generic Postscript is the driver that behaves as above. If I choose the HP driver, it doesn't even get to the printer. Can't find anything else in the driver listing that would make sense. I'm hoping someone has seen this before and can point me to a quick resolution. I'm also willing to accept potential config issues with CUPS, although this setup did work about 6 months ago with 10.5.X, but it's been a while. I'm going to try to find another machine that I can use to test this, but for now, I'm stumped. Thoughts?
-Pete

Pete,
The OfficeJet 5610 is not a PostScript printer, so unless your Fedora box is acting as a PostScript rip, I don't understand why that would be working. Technically it should just work if you use the HP driver for that printer, just make sure you are using the latest HPIJS driver your printer as well. There may be a driver mismatch issue.
Just trying to help.
Andrew

Deskjet D1560 - Incorrect printing of emails

I have bought a new PC with Windows 7 Home Basic (32Bit).
I installed my printer (HP Deskjet D1560) - Windows 7 had to download the update for the printer to be installed.
When I print emails from Ootlook 2007, the headings are printed but not the bodies.
Please help.

The "strange grinding noise" leads me to believe it is the printer or paper stock. I know you said you changed printers, but did you swap the printer having the problem with the one that never does? My HP color laserjet makes a strange grinding noise now that the fuser needs to be replaced (which I will be doing this weekend). Usually the louder the noise, the worse the printout looks...
Nothing in Crystal should cause a printer noise...
HTH,
Carl

Incorrect printer cartridge for photosmart b209a-m

Purchased a photosmart all in one B209a-m printer but the Black XL cartridges DO NOT fit!
They are the proper length and height but are much much wider than the standard black cartridge (Looking down at the top as they are standing side by side )!
Is there a hardware upgrade to accept black XL cartridges or is the HP Website lying? All the other color XL cartridges fit perfectly though. Doesn't make sense.
Help mister wizard!
This question was solved.
View Solution.

Good Morning!
I was so fustrated I took the printer back to "Max" where it was purchased and told that for some reason the base of the recepticle for the Black 564XL was not wide enough to accept the cartridge. HP has made a newer printer (516) that does however accept this cartridge. Now.... just to confuse the issue further... HP now makes a blackXL for my b209a-m but is the same dimensions as the standard cartridge all around. Only holds enough ink for 580 pages though. Better than the standard cartridge but not as good as the larger 564XL. Oh well... lesson learned. Maybe next year I'll get the 516 printer.
Thanks for your reply though!!! Wooo to the whooo!
Continued success in all you do!!!

AIO Remote app cant find HP 7150 aio printer on my wifi network, on Windows Phone 8

HI,
Yesterday I install You App AIO Remote on Windows Phone 8. I have connected to wifi HP 7150 aio printer, but phone cant find this printer... I have Lumia 1520 and Lumia 920 smartphones both is connect to this same wifi network like printer, but You app on both Lumias cant find printer, again but no problem is to connect to printer WEB interface from this both Lumias, so wifi network is correct configured.
I have two tablet more in this same wifi network, both with windows 8.1 x64 systems, on this, You Windows 8 modern App AIO Remote find this same printer without problem...
So what is wrong ? printer config ? eprint is on, ipp is on, bonjur is on, ip is static.
Please help Me becease I wait for this app and now i cant use them
Thanx
Peter

Hi Peter,
Welcome to the HP Support Forums. I understand that you are trying to use the new HP AiO Remote app for Windows phones to print to your Photosmart 7150 printer.
The Photosmart 7150 printer only supports USB connectivity, I have include the Photosmart 7150 Printer Specifications for reference. To be able to use the HP AiO Remote app the printer needs to be connected to a wireless network.
If you accidentally typed the incorrect printer model, please let me know which make/model/product number of HP printer that you have. How Do I Find My Model Number or Product Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to resolve the "Incompatible Print Cartridge" Message

Hello everyone
Have you ever received the "Incompatible Print Cartridge" message? This can be caused by defective cartridges, dirty cartridge contacts, or using the wrong cartridges for your printer or region. If you get this message after moving to a different country and using a different HP ink you will need to call HP support and have them explain how to change the region of your printer.
If, however, you have not moved and you are getting this message with a new or current cartridge there is quite a bit of troubleshooting that can be done. There is both an article and youtube video to help you through resolving this issue They are both excellent tools to help with troubleshooting. If the steps don't resolve your issue make sure to try a different cartridges as this helps isolate the issue to the printer or the cartridge.
The 'Incompatible Cartridge', 'Incorrect Print Cartridge', or 'Print Cartridge Problem' Message Disp...
Fix an "Incompatible Print Cartridge" Message - HP Officejet J4680 All-in-One Printer
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.
This question was solved.
View Solution.

If anyone has any questions let me know and I will be happy to help. The above video and article is for the Officejet J4680 but there are other version of the article for other printers that may have more cartridges than just two.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

How Do I Print Each Frame Separately in the new Firefox

Before the recent Firefox update, in the print screen used to be an option to print each frame separately. Now, that option is gone. Does anyone know how to have it print each frame separately in the new Firefox? I work with a webpage where if I try to print, the first page prints, but the others are all blank. In the past, selecting each frame separately fixed this issue.

Hi,
You can try to [https://www.mozilla.org/en-US/firefox/new/ update Firefox] to check. You can also right-click on the page > '''This Frame''' > '''Print this frame'''.
[https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?e=sph&redirectlocale=en-US&as=s&s=printing&r=0&redirectslug=Firefox+prints+incorrectly Printing problems]
[http://kb.mozillazine.org/Problems_printing_web_pages Problems printing web pages]
If the problem persists, you can consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''.
(To revert to the previous profile you were using, close the new profile (i.e. exit Firefox), start Firefox and choose the '''Default User''' profile. While the [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager] is open, you can also delete the newly reset profile (the one containing random numbers), or the former profile, as the case may be). If the reset is okay, it would be a good idea to delete the old profile as otherwise it would be left intact with the previous data until deleted.
[https://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles]
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]

All in One Printer C5180 stopped printing/scanning from mac 10.6.8

Hi
My All-in-One C5180 has stopped printing and scanning from mac 10.6.8. It had worked for the past few years but after not using it for 8 months (out of country) it hasn't worked since I came back. I have done as a few suggested, carried out a software update on mac and also downloaded a new driver from this site. Neither worked. The message appearing is " printer off-line" and the printer symbol has red exclamation mark.
Would really appreciate any help.
Thanks in advance
Anne

Correction to initial post: The 6 tiny sections incorrectly printed on a single sheet are actually from the bottom right-hand quadrant of the original PDF page - NOT the upper right-hand quadrant.

Incorrect Printing

Similar Messages

Maybe you are looking for