Incorrect result between maintain master data and bex query, how can i fix?

Hi ALL,
i get some messages from the users there is incorrect result between SAP R/3 and Report on BW. i controlled the monitor and i saw there was a job for 0CUSTOMER_ATTRIBUTE that it finish correctly but the processing it was only in PSA, i started the full update immediately from PSA into Data Targets and is finished correctly. after when i control the content of the 0CUSTOMER (right click maintain master data) i get the correct attribute result that match the data in SAP R/3, but the problem is when i execute a query Bex on this master data it will not return the same attributes data.
Can SomeBody Help please
Bilal

hi,
For any master data attributes loaded you will have to run "Attributes Change Run" for that.Execute for Master data 0CUSTOMER.
The same is avilable in rsa1->Tools(top menu)->apply hierarchy/attribute run.
hope it helps,
regards,
Parth.

Similar Messages

  • I purchased 15GB of storage but it shows that I only have 14.8GB even after having purchased more. I also removed alot of data and apps. How can I fix this issue?

    I purchased 15GB of storage, but it shows that I only have now 14.8GB available? I also deleted apps and anything that would allow for more space. How can I resolve this issue?

    You. as many other people purchased storage in icloud instead of getting yourself a bigger device (iphone/ipad/ipod). Device storage does not increase with icloud storage purchase. Just like other people you may have to contact Apple for refund and in the future look into buying bigger sized iphone.

  • Ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

    ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

    I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

    Welcome to the Apple Community.
    A number of users have encountered this problem, for existing users the problem has largely been resolved by restarting the Apple TV. However since you are a new user it would be wise to check that your settings are correct to begin with. Ensure the router allows access over port 123 (TCP) and that you are using the DNS settings provided by the ISP and not your own.

  • Firefox opens but no content is shown, url says the website but the tab does not load up and says '(untitled)'. how can i fix this?

    firefox opens but no content is shown, url says the website but the tab does not load up and says 'untitle'. how can i fix this?
    == This happened ==
    Every time Firefox opened
    == after norton asked me to restart my laptop. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; eSobiSubscriber 2.0.4.16; .NET4.0C)

    Hi,
    Unfortunately we had a data base error today and lost some user accounts when we had to go back to our backups. If you have started this thread, your's is one of those. Since we can not recreate your account, please sign-up for a new account here to reply to the forum messages:
    https://support.mozilla.org/users/auth
    You can use the same username and email address as before. We are very sorry for the inconvenience.

  • Something is gone in Indesign menu. I dont know why, but the «textwrap» is gone and «stroke». How can I fix this?

    Something is gone in Indesign menu. I dont know why, but the «textwrap» is gone and «stroke». How can I fix this?

    When you switch active Extension Set or enable/disable extension(s), Extension Manager will create/update PluginConfig.txt. InDesign will read this file at launch to determine which extensions (plug-ins) should be loaded or not. If this file doesn't exist, InDesign will load all extensions. Also complicated dependency relationship exists among extensions. I am not sure how these extensions ran into incorrect state.
    If sometime you have to use Extension Manager, you have to reset the state BEFORE launch it. Otherwise Extension Manager will recreate this file based on incorrect database records and file state.
    1. Delete "Macintosh HD/Library/Application Support/Adobe/Extension Manager CS6/Configuration/DB/ExMan.db".
    2. Delete all files in  "Macintosh HD/Library/Application Support/Adobe/Extension Manager CS6/EM Store/InDesign CS6"
    3. Delete all files in  "Macintosh HD/Library/Application Support/Adobe/Extension Manager CS6/Mxi Flag/InDesign CS6"
    4. Move all files in "Macintosh HD/Library/Application Support/Adobe/InDesign/Version 8.0/nb_NO/Extensions/REMOVED" to the parent folder "Macintosh HD/Library/Application Support/Adobe/InDesign/Version 8.0/nb_NO/Extensions".

  • Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?

    Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    -Griff W.

  • I have the top of the range MacBook Pro. Yet every time I open iPhoto it grinds to a halt with iPhoto crashing 1 out of every 4 times I open it. Is this normal? And if not how can I fix it?

    I have the top of the range MacBook Pro (but not the latest one with the Retina display). Yet every time I open iPhoto it grinds to a halt with iPhoto crashing 1 out of every 4 times I open it. Is this normal? And if not how can I fix it? I have 55k photo's.

    No it's not normal. What version of iPhoto?  Post the first 50 lines only of the crash report
    Regards
    TD 

  • Firecox became very heavy on my system and it some pages freez for a second or tow second however my processor 2.4 and ram 256 how can i fix it ?

    Firefox became very heavy on my system and it some pages freeze for a second or tow second however my processor 2.4 and ram 256 how can i fix it ?
    == This happened ==
    Every time Firefox opened
    == after firfox 3 and later version

    i think your RAM is so low, i have 3gb ram and has some problem when firefox opened and worked for many hours.

  • In the new IOS 7, my IMessage and FaceTime won't let me log in using the correct Apple ID and password. How can I fix this?

    In the new IOS 7, my IMessage and FaceTime won't let me log in using the correct Apple ID and password. How can I fix this?

    Other users have reported same problem with 4G iPod/iOS 6.1.6 and I have not seen a solution. One user reported yesterday or the day before that it just started working again.

  • When I print on photo paper it only prints in black and white. How can I fix this?

    When I print on photo paper it only prints in black and white. How can I fix this?

    Does it print correctly on plain paper?
    What do you do differently to print on Photo Paper than to print on plain paper?
    iPhoto has no idea of what paper is being printed - that is totally a function of the printer and the print driver supplied with the printer - you need to look at the printer specific options and your printer manual and/or support forums
    LN

  • My iPod now loses my Klondike scores/settings after I "save and exit".  How can I fix this?

    After my last iTunes sync, my iPod loses my Klondike scores/settings after I "save and exit".  How can I fix this?

    I'd try a hard reset, you have nothing to lose.  If that doesn't help and you can shut off the iPod (i.e. the white screen becomes black) you can try to recover it: http://support.apple.com/kb/HT1808
    If that still does not fix the problem and it was Apple that replaced the iPod, return it to them, you have a 90 Day Warranty.  If you replaced the screen yourself,  I have no idea if you did something wrong in the repair or if the replacement screen was defective.  That is the main risk of a self repair.  I doubt whether Apple will do an out-of-warranty repair on an iPod that has been opened, but you can try.

  • Difference between Activating Master Data and Attribute Change Run

    Hi
    Is there any difference between Atribute change run and Activating Master data functionaaly???
    if wha it is???
    can any one explain clearly?
    Thanks
    Chinna

    When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
    When u create a characteristic and if u keep it as master data and activated..it is master data activation
    Activating Master Data
    When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
    For more information, see Versioning Master Data.
    Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
    Upon Activation there are two scenarios to choose from:
    The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
    If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
    1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
    2. Proceed as described in System Response upon Changes to Data: Aggregate.
    The system now automatically restructures and activates the master data and its aggregates.
    Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
    The Corresponding Master Data Is Not Used in Aggregates:
    Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
    The system now automatically activates the master data so that it can be used directly in reporting.
    If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
    if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
    Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
    Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

  • Difference between earliest master data and master data change bonus

    Hi,
          Can anyone tell me what is the exact difference between earliest master data change and master data change bonus? Whenver any infotype is changed, why are the dates updated in both the fields? Is  it not enough if only Earliest master data change field is updated? I was thinking that Earliest master data change bonus field is updated when IT267 is created, but even if i change the time data both the fields are getting updated. Please advise?
    Thanks

    Hi,
    Earliest master dat change date is date beyond which no master data change can be put in for employee in infotype.
    It is used to restrict any master data entry beyond certain date as restriction for employees that client has set and is moreover controlled at control record level but ocassionally used at employee level whenever payment was hold for long time and so on.
    Master data change bonus date is date which gets automatically filled in whenever there is any master data change.
    This date cannot be past earliest master data change date and will throw error if tried for employee to input.
    Thanks,
    Ameet

  • What is difference between tha master data and tranction data

    Hi, Gurus
    this is  sudhakar
    i want to no what is the difference between the transaction data and master data  give with examples .
    Thanks
    sudhakar

    Hi,
    The most important data classes are master data, transaction data, organizational data and system
    data.
    Master data is data that is rarely modified. An example of master data is the data of an address file, for
    example the name, address and telephone number.
    Transaction data is data that is frequently modified. An example is the material stock of a warehouse,
    which can change after each purchase order.
    Organizational data is data that is defined during customizing when the system is installed and that is
    rarely modified thereafter. The country keys are an example.
    System data is data that the R/3 System itself needs. The program sources are an example
    for more info go through..
    [http://help.sap.com/saphelp_nw70/helpdata/]
    regards,
    NR

Maybe you are looking for

  • How to get the frame number of a label in a different scene.

    I am completely stumped on this. I have my project setup as the gameplay in one scene, and another scene for the outcome. The outcome scene, say called, GameDone, has 2 frames. The first frame for win, labeled it WON, the second frame for lost, label

  • Set type attribute search help in Web UI

    Hello, I've created a set type attribute in the SAP GUI in CRM 2007 which links to value table BUT000. On the product in the SAP GUI, the F4 search help brings up the standard BP search help (COM_PARTNER). I've assigned the attribute to the web UI, a

  • Graphics don't display in pdf?

    When I view pdf's on my iPad 2, sometimes the graphics are fine, but often there are blank areas where some of the graphics should be. I create the pdf's in Adobe Acrobat 8 Professional by printing to a file from a variety of applications (Word, Powe

  • Best way to backup macbook

    Hello i was looking for some advice on backing up my macbook, i did think that i could plug an external drive and run time machine but as the external drive is also used for my windows machine, it says incorrect file system for time machine. I then d

  • Safari links open in new tab

    hello. I just encountered wierd behaviour, on my 2011 base 13 MBP. I'm pretty sure this wasnt happening before Example- I search for "downloads" in the google box on my toolbar. It loads the results. I click on the first result, which opens the link