Incorrect russian code page in messages in iAS 9i and Oracle8i R3

The Oracle iAS 9i and Oracle 8i Release 3 for Windows NT has strange code page for this platform: ISO-8859-5 (UNIX Russian), but must be CP-1251 (Windows Russian). I can't install iAS on Windows platform, because messages in installer not correspond platform code page and unreadable :(
May be you know any patches for correct this problem?
null

Hello again Jan,
I think this might help...
From Note 187898.1 (http://meatlink.oracle.com) ->
"When you specify the preference PARSER=YES to enable
PL/SQL definitions to be parsed during server generation,
missing BEGIN and END statements will be added at the beginning and the end of a PL/SQL block, missing DECLARE statements added for triggers, etc.
When the preference PARSER is set to Yes, generation of the larger packages takes a lot of time - this might use up your CPU and virtual memory (Bug 1569508 fixed in 6.5.84 ) and ALSO will be unable to add begin/end
correctly if there are any syntax errors in the <declarations> or <statements>.
Hence you might see the CDS-11321, CDS-11307 warnings
and finally PLS-103 compilation error when generating
to the database. All these packages have somewhere in
it PL/SQL code having 'begin' or 'end' words within the
code (as strings).
This was recorded as a bug and fixed from 6i Release 4.3
or 9.0.2.1.0 onwards. You could use PARSER=NO instead
(especially if you're using a previous version that
included the bug).
Hope this helps.
Regards,
Dominic

Similar Messages

Layout tab msg: 510 bytes transmitted, code page 0000 Message no. FES032

Hi Guys,
Whenever I click on the layout tab in SFP getting the following msg at the msg bar.
510 bytes transmitted, code page 0000
Message no. FES032
and also preview tab is not there.. its also disabled in View menu.
Anyone come aross similar issue ?

Hi.. I am trying to answer questions as well..
Its probably SAP GUI issue..
Is it something mandatory I have get points to ask questions here.. !!
Cheers

Cyrillic fonts (Russian Code page) error at native email message client on PB (when replying on gmail)

Hi, everyone.
I've an error with russian code page when replying e-mails from native message client on PB (tested at gmail account).
It looks like code page of replying text at outgoing message changes:
Windows (1251) -> KOI-8R
and become unreadable.
Images with error description:
http://imageshack.us/photo/my-images/32/26281431.jpg/
Mirror:
http://s2.postimg.org/pu7eqbj21/image.jpg
Does anybody have this problem and solution?
Thanks for any help.

Hi, everyone.
I've an error with russian code page when replying e-mails from native message client on PB (tested at gmail account).
It looks like code page of replying text at outgoing message changes:
Windows (1251) -> KOI-8R
and become unreadable.
Images with error description:
http://imageshack.us/photo/my-images/32/26281431.jpg/
Mirror:
http://s2.postimg.org/pu7eqbj21/image.jpg
Does anybody have this problem and solution?
Thanks for any help.

Server returned code (500) with message Internal Server Error and content

Hi cracks,
I am trying to run the web service
InternalRequestSRMUpdateRequestConfirmation_In
an get following error :
Server returned code (500) with message <Internal Server Error> and content type <text/html; charset=utf-8>.
any idea?
rgds
Vincent

yes,
you got crash aka shortdump in your system.
- webserver: didn't crash, because it issued an error 500, so it works
- remains either the soap runtime, which usually doesn't dump but throw errors and the application itself.
I'd look into the tracefiles (ST11) or tie the debugger to the service in question (SICF) and try to find out hat happens/d.
anton

Regarding code page conversions

Hi ,
I have a query on code pages in unicode evironment.
first of all sorry for big mail on my question
There were a couple of issues when we have upgraded from 4.7 to 6.0 . These issues were mainly in the code page conversions from one code page xxxx to yyyy and the dataset transfers.
the problem which im facing is trying to understand exactly what is this code page doing in the back ground and these multilingual conversions all about .
there is a custom code page that my client has made in his landscape and now in majority of the interfaces we need to handle the code based on this code page .
for ex in the open dataset statement we add legacy text mode code page p_code ignoring conversion errors message lv_message .
i see some of the characters especially scandinivian korean chinese and japanese giving some major problem during the file transfers to unix and ftp environment .
case 1.
now we are referring to a custom code page 9xxx . now take a character as ä , now when i write a transfer statement
with referene to this code page it is displaying as # in unix path.
now taking the hexa decimal value of this character if i search in the custom code page (tcode scp with the hexa value of such characters ) there is a value already present in this code page 9xxx, now when i have a value maintained why am i gettina a # in the unix server .. how to check the consistency /validity of this code page
case 2.
some hungarian characters like o with a tilt on top cause conversion error dumps during the transfer . again the code page has this hexa value in it .
why in this case the conversion from 4102(basically utf-16)
to code page 9xxx is failing . why it is calling 4102 in this case ?
ignoring conversion error bypasses this strange chars (cxsycodepage*dump) but how to hold the correct value at any point of time in the desired server i mean at last i need to transfer o with a tilt instead of a # .
Please give some in depth work around solution instead of some vague answers .
Will appreciate your effort and time for this .
Thnx much .
Br,
Vijay.

hi
I am facing same problem when reading the file from application server.It gives me short dump.Can u tell me how can i resolve the code page error issue.In dump analysis i am getting error "NOt able to covert code page '4110' to '4102'

Incorrect code page in SE63

Hi,
Several of my Long Text (SE63) Other Long Texts: SAP Forms cannot be translated in SE63.
EX: trying Z_ORDERCONF from EN to SV
It gives me an error "Incorrect Code Page" and nothing more happneds.
During the weekend our SAP Admin did an upgrade to SAP DEV and we run now on SAP_BASIS 620 0060 (before 0059).
Don't now if this has anything to do with my problem...
//MA

You must set up the code page for all target languages. Perhaps OSS notes 73606, 15023, 42305 can help you.

Smartform Translation using SE63 returns Error 'Incorrect Code Page'

Hi,
I have created a smartform in english & want to translate to Language IT, FR, DE.
I am able to translate it using SE63 for DE but unable to translate to IT, FR.
The error in status is <b>'Incorrect Code Page'</b>.
Language Attribute is set to : Translate to all Languages.
In SE63 the Source Language: EN, Target Language: IT
The Languages installed in the system is EN & DE only.
My questions on this issue:
1. Is it required the language fonts for IT & FR be uploaded & then the Translation in SE63 work fine ???.
2. Is some other parameter needs to be set.
Rgds
Vincent

If you need to translate the Smartform to any target language the Target Language must be intalled in the SAP System. The error occurs because IT, FR is not installed in the SAP System.
Installing the Language Code pages will solve the problem.
Hope That Helps
Anirban M.

Open data set / code page

Hello ,
I am sending file to print server and i am accounting problems with special characters
In first version of program ( please see the code below )
"OPEN DATASET g_filename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT."
The special characters l from German and French   alphabet were NOT printed properly , and we had some nonsense results . Other '"Normal "characters like A , B... are printed without errors .
To prevent this error i wrote new line of code for open data set ( below ).
"OPEN DATASET g_filename FOR OUTPUT IN   LEGACY TEXT MODE CODE PAGE '4110' IGNORING CONVERSION ERRORS."
This was working only when FTP was NOT used , when FTP was used i had following short dump.
I am working in SAP release 6.0
Please Advice
SHORT DUMP Message :
What happened?
    The conversion of texts in code page '4102' to code page '4110' is not
    supported here.
    The current ABAP program 'SAPLZPRN_AUTO_LBL' had to be interrupted because
     incorrect
    data would have been created by the conversion.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CODEPAGE_CONVERTER_INIT', was
     not caught in
    procedure "Z_TRANSFER_FILE" "(FUNCTION)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Possibly, one of the codepages '4102' or '4110' - needed for the
    conversion - is unknown to the system. Another option is, that a Unicode
     codepage was specified for a file in LEGACY MODE, which is not allowed.
    Additional parameters for the codepage conversion (as , for example, the
     replacement character) might have invalid values. You can find further
    information under 'Inernal notes'.
    If the problem occurred at opening, reading, or writing of a file, then
    the file name was '/te/mm/labels/0488_20091208_051317_EC008119_01_001.dd'.
     (Further information about this file: " X ")

Hi,
Also check the character set supported by the Printer. Printer configuration should also be checked on SAP side to determine character set and code page using SPAD.
Regards,
Nishad

Could not find code page for receiving system

Hi Experts,
When I scheduled a PC i got this Error Msg. What is the real cause and how can i correct it?? Thanks
Dave
"Could not find code page for receiving system"

Hi Praveen,
The detailed error msg says the following.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.

Infopackage Idocs in status 2 - could not find code page for receiver system

Hi,
We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
We did not encounter this issues on our previous migration test runs..
Hope someone can help
Christophe

Hi,
Thanks for responding. We finally found out what the problem was.
We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
Regards
Christophe

Code page issue - Unix file(s) content display in a report output

Hi All,
I am trying to retrieve file from Unix server and display in my report output.
I have written code as below:
OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET filename INTO i_tab-line.
ENDDO.
CLOSE DATASET.
1. Now i am able to display files of type .txt in report output but with line numbers above each line.
How can i avaoid it! I want to display as it looks in AL11 view.
2. If i am displaying files of type .PDF it is giving dump with below message:
A character set conversion is not possible.
At the conversion of text from code page '4110' to '4102' is not possible.
- a character was found that cannot be displayed in one of the two code pages;
- or it was detected that this conversion is not supported.
How can i display the .PDF (or) all types of files in my report as it is viewable in AL11.
Can anybody solve this this.
I have tried UTF-8 & NON-UNICODE options with ENCODE also they are also giving same dump.
Can anybody resolve these issues!
Thanks in advance.
Thanks,
Deep.

Hi All,
Any resolution for above posted issue!
Thanks,
Deep.

Skillbuilders modal page - success message not closing in Internet Explorer

Hello,
I'm using Skillbuilders modal page plugin on Apex 4.1.
The plugin works great in all browsers except in IE, where I'm unable to close the success message by clicking on the "x" in the upper right corner.
I'll explain further.
I have a report on, say, page 10, and I'm editing each row in a modal page (page 11). Upon saving the changes, the modal page closes and a success message is shown on the page 10. I can see the message both in Firefox and IE, however, I am unable to close it in IE.
When I inspect the success message using Firebug in Firefox, I see that I have:
<div id="messages" style="display: block;">
<div id="success-message" class="success">
<img class="remove-message" onclick="$x_Remove('success-message');" alt="" style="float:right;" src="/i/delete.gif">
Action processed.
</div>
</div>However, when I inspect the success message in IE, I see:
<div id="messages">
</div>The success message is shown on the page, but it doesn't show in the page source code, and clicking on the "x" doesn't close it.
I've tried it with several themes, the problem persists.
Does anyone have any idea what might be the problem here?
Did someone have a similar problem?
Thank you!

I've been looking at it, kind of gutted that indeed the semi-colon means nothing. Was sure that was it, and then didn't bother to test it in the template anymore as it ate so much time already. That should teach me...
Anyway, I was puzzled too. Apparently it has to do with IE8 and jQuery appending code to the document, whether it is .append or .before. The element is there and all, but the onclick just does nothing. Why did it work after editing it? Probably because IE was then able/willing to pick the attribute up.
I've fiddled with it over and over, trying to find something ,googling it, but couldn't really find a certain cause nor fix. Putting in the anchor? Nope. Onclick reacting only on second click? Nope. Just do an alert? Nope. Just nothing works at all. I really just gave up. IE8 is just such a headache that by trying to "fix" it in its ways you're off worse.
In the end I fixed it in another way. My template is different than yours but the technique is the same.
I removed the onclick attribute from the success message region, on both page templates. If it ain't gonna work I don't want it there (good riddance too). I changed the href attribute too by just putting "#" in, which is probably just me being pedantic. This is my result success message template:
<section class="uRegion uWhiteRegion uMessageRegion clearfix" id="uSuccessMessage">
<div class="uRegionContent clearfix">
    <a href="#" class="uCloseMessage"></a>
    <img src="#IMAGE_PREFIX#f_spacer.gif" class="uCheckmarkIcon" alt="" />
    <div class="uMessageText">
      #SUCCESS_MESSAGE#
    </div>
</div>
</section>To be able to close it, I added some javascript in the page header:
<script type="text/javascript">
    $(document).delegate(".uCloseMessage", "click", function(){$(this).closest(".uMessageRegion").remove(); return false;});
</script>This is much in the way of a dynamic action with scope "live". I didn't want to bother with having to put a dynamic action on each page, and is why I did it this way. It works fine in each browser too, so hurray.
Your solution works too of course, it's much the same. I wouldn't call it a "workaround" too, since it didn't work initially anyway. I wouldn't look further and stick with what works best for you. :)

IDoc Status 02 ( Could not find code page for receiving system )

Hi All,
I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
Error description.
Could not find code page for receiving system
Message no. E0266
Diagnosis
For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Procedure for System Administration
Possible causes are:
1. The entry no longer exists in the table of logical destinations.
2. The target system could not be accessed at runtime.
3. The logon language is not installed in the target system.
4. In the destination system, no logon language is maintained
Please help.
Thanks - Vinay.

Hi Vinay,
Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination is working fine and your able to connect to target system and also check correct port is assigned.
Regards,
Vinod.

Error in code page mapping for Source System

Hi All,
We are Loading data into BI system from MDM System.
It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
Message Class: RSDS_ACCESS 13.
We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
Any pointers for this error will be Helpful.
Regards,
Mayank

Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
any advice.. ?
Edited by: Edi Erwan Abu Talib on Jun 22, 2009 8:22 AM

How to output FTP file with Code Page 8400?

Hi gurus,
       As we know we can use GUI_DOWNLOAD to download fiel with specific Code Page,
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
     filename          = 'E:\TEXT.TXT'
*      confirm_overwrite = 'X'
      codepage          = '8400' "Chinese
    CHANGING
      data_tab          = i_file
    EXCEPTIONS
     file_write_error = 1
      OTHERS            = 24.
IF sy-subrc EQ 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
But my question is how to output file into FTP server with specific code page 8400?
call function 'FTP_R3_TO_SERVER'
    exporting
      handle         = p_handle
      fname          = p_filename
      character_mode = 'X'
    tables
      text           = i_file
    exceptions
      tcpip_error    = 1
      command_error = 2
      data_error     = 3
      others         = 4.

Thanks but it is not my anwser
I want to output file to FTP Server with specific code page like
GUI_DOWNLOAD

Incorrect russian code page in messages in iAS 9i and Oracle8i R3

Similar Messages

Maybe you are looking for