Incorrect screen name displayed

On forums discussions my full name is displayed instead of my screen name. How do I correct this. I do not want my full name on display. My screen name is entered on my profile.

Well, there are some strange people who post under their real names. I am one of them, but cannot speak for John. For all I know, John T Smith could just be his screen name...

Similar Messages

Screen name display bug

Just discovered that if you enter a screen name with, say, an apostrophe in it, the forum software actually displays the backslash escape character before it. I'm guessing the same would have happened with a double-quote character.
Either support punctuation in screen names or don't, Adobe.

On Mac There are Forbiden Characters that are not allowed in Hard drive, Directory, File and Folder names When you using Office and also affects other application as well:
Some of the forbidden Characters are:
Numbers before names, Superscript/Subscripts, " ' \ | / < > { } [ ] << >> : and ::
Numbers after Names are okay. None of these characters can be used in name of Hard Drive, Directory Names, and any File Names.
And on servers no names can have the name File or Fileserver in any path names.
You can use _ (underscores).

How does User get Identified by Screen Name and NOT by Real Name in submitting a Forum Post?

I have noticed that when I post a question or discussion item to one of Adobe's Forum Communities, I am identified as the author of my post by my actual legal name, not by my Screen Name that I set up in my profile when I registered. The same applies for the posts of others--they are identified by their legal names, not their screen names. What is the purpose of the Screen Name we set up when we registered, if not to shield the identity of the individual from others reading the post, if that person does not want to have their true identity publicly disclosed in, or publicly associated with the post? If I sign my post using my Screen Name, but then it is identified with my legal name when I post it, what good does it do to have a Screen Name? Is there some way to have the software not use my legal name, but identify my posts by my Screen Name only, if I so choose that option? (Of course, Administrators at Adobe can always (presumably) identify the (real name) author of the post, via the registration information associated with a Screen Name, should the need arise.)
Sincerely,
SpaceAdventurer

Thanks for the reply, mytaxsite.co.uk. And thanks for the screenshot showing me that my name is displayed to you as "spaceadventurer," which is what I had intended / wanted.
I understand now, from reading through most of the original and replies to the post,Real name instead of Screen name displayed, where I noticed you replied several times, that the Screen Name / real legal name works this way on Adobe’s forums:
When you are logged in - YOU (and only you) see your real legal name everywhere on the forums / web site, and associated with all of your posts
When you are not logged in (to Adobe / forums with your Adobe username / password), you always see your name associated with your posts as your Screen Name only
Everyone else always sees your screen name, everywhere, on all posts, regardless of whether they (everyone else) are logged in or logged out. (Unless, of course, you set up your profile to have your Screen Name be your real legal name. Then everyone will always see your real legal name associated with your posts.)
When logged in, in the “Edit Communities Profile” web page (from the menu that appears when you click your Avatar in the black Adobe menu bar at the top of the screen), in the “Privacy” tab on that page, there is a “widget” called ‘Preview your profile’ in the upper right-hand corner of that tab. This widget is supposed to show you how you or others, depending on which selection you make from the dropdown in the widget, will see your Profile (and therefore, your name) from their computers. In fact, no matter which selection you make from the dropdown, the display of your profile that is produced ALWAYS shows your real legal name, which is misleading, because that is not in fact, what others will see. Others, whether “Registered Users,” “Friends,” or “Everyone,” will ALWAYS see your Screen Name only. (Except for the exception I mentioned in the immediate previous bullet.)
There is a way to change your Screen Name, should you feel the need to do so. The steps to do that are detailed in response no. 75 to the "Real name instead of Screen name displayed" forum post.
Does it sound to you like I have captured the gist of the main learnings that can be gleaned from that post ("Real name instead of Screen name displayed”)?
Thanks,
SpaceAdventurer

Why does my real name appear instead of my screen name?

Why does my real name appear instead of my screen name?

It only appears for you when your signed into the forum.
(nobody else but you can see your real name)
more info:
Real name instead of Screen name displayed
This is what i see:

Why is my screen name not displayed?

Hello,
When I signed up for the community forums I selected a screen name but my full name, not screen name, shows up when I post a question. I don't see full names displayed for any other users, why does my full name show up? How can this be fixed?

Your full name shows only to you; we see your screen name of packetstar.
Use the drop-down next to your user name at the top of the page and select Edit Profile, then Your Profile and Privacy tabs if you want to tweak your settings.

The recipient name displayed on my received emails is incorrect

For the last week or so, all the emails that I have received to my account have the name of one of my friends displayed as the recipient, rather than my name in the address panel at the top. When I hover my mouse over the recipient name, both my friend's email details and my email details can be seen.
When I forward the email with the incorrect name displayed as recipient, the incorrect name does not appear. However, I am most concerned at the potential security and nuisance possibilities for my friend (and for me by the way). There is obviously something in the display settings that has gone awry, but I have searched the email account set up for a solution and cannot solve the problem.
Can anyone help, please?

My problem has not been solved by removing my name from my friend's address card. The recipient information now includes my email address, but is still directed to my friend's name.
I have checked in my address book, as suggested, to see which entry is designated as me, and the only email entry against my name is my work email, not my personal email address, which is the one with the problem.
I have tried to add another sender to my address book, but the function seems not to be responding to my request. Any advice?

Can I disable the LCD screen from displaying the Network Name or Password of my device?

Can I disable the LCD screen from displaying the Network Name or Password of my device? I feel that having this information readily available to any who can turn on my device is a security flaw.
I have change the network name and password and would like to secure that information .

Worked with VZW tech support and finally found where you can disable or mask the display of the network name and password on the Jetpack LCD screen. You need to access the admin screen of your jetpack (http://my.jetpack/) . From there, navigate to Jetpack Settings --> Click on Wifi tab -- Click on the Wi-Fi Options link halfway down the page and it will show the two settings that control the display of network name and password.
As they say, a picture is worth a thousand words...here are screen shots showing how to get to these settings. ...
The LCD display will show ********* for the network name and password if the two checkboxes above are unchecked. I really think these settings should be disabled to be begin with.
Oh well...posting here to share with those interested...

Regarding Selection-Screen Field Display

Hi All,
I have issues with Selection-Screen field display.
The Actual issue is i had declared a selection screen field as: s_exgen FOR embk-exgen.
EMBK-EXGEN is actually 20 Char length field.
But in output display it is being shown as 18 Char field though i can type in all 20 characters.
But display restricted to 18 Characters only.
Can anybody give me the solution for the same!
Thanks in advance.
Thanks & Regards,
Prasad.

Hi,
You can decrease the visible length of the field but you can not increase more than database field length. check SAP help on this :
select-options: s_exgen FOR embk-exgen VISIBLE LENGTH 5.
... VISIBLE LENGTH vlen
Effect
This addition allows you to shorten the visible length of the corresponding screen field on the selection screen to vlen.
Variant 2
SELECT-OPTIONS sel FOR (f).
Additions as in variant 1.
Effect
In this variant, (f) must be a field containing the name of the actual reference field at runtime. The system creates the LOW and HIGH fields as character fields with length 45. However, their appearance on the selection screen is inherited from the reference field whose name is contained in field f at runtime.
Regards
Appana

Interactive report: third screen not displaying

Hi Experts,
I am doing a interactive report in ALV grid...and my requirement is
when the user clicks on SPMON which is displayed on the initial screen the first screen
should display and in first screen when the user clicks LIFNR second screen should display..
I am able to display initial and first screen but second screen is not displaying...I am
pasting a pinch of my code please have a look and advice me..
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
For second screen : which is not working
FORM USER_COMM_1 USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC2'.
      IF R_SELFIELD-FIELDNAME = 'LIFNR'.
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM_1
Please advice
Karthik
Edited by: Karthik R on Apr 29, 2009 12:22 PM

Use both conditions in USER_COMM.
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
                           R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
    WHEN '&IC1'.
      IF R_SELFIELD-FIELDNAME = 'SPMON'.                      " Field name SPMON
        READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_1[].
        CLEAR IT_TAB_1.
        LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
                           AND ART = IT_TAB-ART.
          MOVE IT_FIRST-WERK       TO IT_TAB_1-WERK.
          MOVE IT_FIRST-LIFNR      TO IT_TAB_1-LIFNR.
          MOVE IT_FIRST-MEANQ      TO IT_TAB_1-MEANQ.
          MOVE IT_FIRST-BASME_QM   TO IT_TAB_1-BASME_QM.
           APPEND IT_TAB_1.
          CLEAR: IT_FIRST, IT_TAB_1.
        ENDLOOP.
        REFRESH IT_FIELDCAT1[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
        USING:
          'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
          'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
          'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
          'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_USER_COMMAND             = 'USER_COMM_1'
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT1[]
         TABLES
            T_OUTTAB                          = IT_TAB_1[]
      ELSEIF R_SELFIELD-FIELDNAME = 'LIFNR'.              " ELSE FIELDNAME LIFNR
        READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
        REFRESH IT_TAB_2[].
        CLEAR IT_TAB_2.
        LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
        SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
          MOVE IT_SECOND-ART        TO IT_TAB_2-ART.
          MOVE IT_SECOND-SPMON      TO IT_TAB_2-SPMON.
          MOVE IT_SECOND-MATNR      TO IT_TAB_2-MATNR.
               APPEND IT_TAB_2.
          CLEAR: IT_SECOND, IT_TAB_2.
        ENDLOOP.
        REFRESH IT_FIELDCAT2[].
        S_LAYOUT-ZEBRA = 'X' .
        S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
        PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
                USING:
                  'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
                  'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
                  'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           I_CALLBACK_PROGRAM                = SY-CPROG
           IS_LAYOUT                         = S_LAYOUT
           IT_FIELDCAT                       = IT_FIELDCAT2[]
          TABLES
            T_OUTTAB                          = IT_TAB_2[]
      ENDIF.
ENDCASE.
ENDFORM.                    "USER_COMM
Regards,
Gurpreet

Month name displayed in month calendar view for previous month

In iPad IOS 7.04 iCal month view the month name displayed at the top of the window is incorrect. The previous month name show when viewing a calendar month. Test by selecting year view and the any month from the year. The month view will be for the selected month, but the month name will be for the preceding month. The incorrect month name in month vie is also displayed if the month view is scrolled to new months.
I observe this on my iPad II.
Ha s anyone seen this error? Does anyone know if Apple has seen this and has a plan to correct it?

Imhave the same exact problem on my iPad2. It was not fixed in the recent iOS 7.1 release, even though modifications were made to the calendar app. Very frustrating, since this is such an easily observable problem.

How to find the screen name in a screen?

Hello experts
I am using loop at screen to make my selection screen dynamic
please tell me how to find all screen-name of a screen.
thanks in advance.
Chitta Ranjan Mahato
Moderator message: please think about it before asking, you are naming the selection fields yourself in your program, if still in doubt, just debug your "loop at screen"
Edited by: Thomas Zloch on Nov 9, 2010 12:57 PM

I am writing a program where in selection screen there will be two radio button named application server and presentation server when user choose application server screen changes dynamically and the block containg related to appliction server will be displayed in selection screen. to achieve this i have write code like
at selection-screen output.
if <radiobutton-name> = 'X'.
loop at screen.
{color:green}
if screen-name = 'radiobutton-name'.
{color}
if scree
thanks
chitta ranjan mahato

Sync error incorrect account name or password

I attempted to activate sync between my desktop and my Android phone today. I have used Firefox as my desktop browser for probably about a decade. I had synced this computer once before without issue to a previous phone, but I did not like the mobile app on the phone I had at the time and I deleted the sync on both devices and my account. Now, I love your mobile app for my Android phone and wanted to give sync another try.
Since I had deleted the previous account, I attempted to start from scratch today. Firefox allows me to enter an email address and password into the create an account screen without issue. Once I get to the sync screen where it says it's attempting to upload to sync, I get an error at the bottom of the screen that states "Sync encountered an error while syncing: Incorrect account name or password. Sync will automatically retry this action. [Preferences]"
I have tried to update my password, but an error comes up which says that the server rejects the password every time I attempt to update it. My email/account name for sync is "[email protected]", and I am using a password that is more than eight characters, consisting of letters and numbers. I can log into my sync account without problem, but my computer will not sync and gives the same errors every time I attempt to sync. Out of sheer frustration, I have deleted my account and tried to start from scratch over a dozen times throughout the day, and the same error always occurs. I have also cleared my internet data to see if that would correct the issue. I would really love to be able to sync my devices. I have left my sync account active in the hope that you can help me correct this problem. Any assistance would be greatly appreciated.

I had this problem, but fixed it. The culprit was '''custom privacy/history settings that were set to clear saved passwords on exit''', i.e:
Options > Privacy > History > "Firefox will: Use custom settings for history" > "Clear history when Firefox closes" > Settings > Data > Saved Passwords
This made firefox clear all saved passwords (which is generally what I wanted, as I use LastPass for password management), including the Mozilla Services Password (which is NOT what I wanted, as I still want to use Firefox Sync).
To see if you're having the same problem:
# After setting up sync, make sure that you have two lines in Saved Passwords (which you can find under Options > Security > Saved Passwords) starting with "chrome://weave" and mentioning Mozilla Services.
# Restart Firefox and check if the Mozilla Services passwords are gone. If they are, check if you have the same custom privacy settings that I have.
For the devs: If I may suggest a solution, I would make the Mozilla Services password entries excempt from the clear-saved-passwords option. (Yes, I realize that adding exceptions to the rule, like this, is probably easier said than done.)

Incorrect PDF being displayed periodically in the browser

I want to start by thanking anyone who could shed light on this problem.
We have a web application that dynamically generates PDF files per a user request in a web application. 98% of the time the proper PDF gets opened in the browser correctly, whether it be IE or Firefox. The other 2% of the time, no matter what url data was requested from, an incorrect PDF is displayed. This incorrect PDF that gets displayed is one that was requested and opened in a previous request and could still be open in a browser tab. Once this state is reached all PDFs that are requested do not line up with the requested PDF, meaning they are all incorrect. Once the browser is refreshed the problem stops happening for another stretch of time.
I have read posts that discuss placing a random number in the url to "trick" the browser plugin from thinking it already has the PDF. We have done that. In fact this issue appears to not be impacted at all by the url. For example, when this problem happens I can go to https://appname/one/pdf and get the PDF that was requested and sent back when I went to https://appname/two/pdf. These are two clearly different urls even without the random number that we placed on the end as a parameter and I still receive the PDF from the second URL.
We debugged the server side code and we are 100% sure that we are sending the correct PDF back to the client by streaming the PDF to a file on the server prior to sending it back to the client.
One thing I have noticed is that currently we are not specifying the Content-Disposition header when we return the PDF to the browser. This means that there is no filename being provided to the front end and the plugin. Is it possible that the Adobe Reader plugin eventually gets confused as to what file to display if there is no specific file name provided for the PDF from the server, with the keyword there being eventually as it is an intermittent problem?
We can easily set the Content-Disposition header to be attachment; filename="somename.pdf" but given the intermittent nature of this bug we would like to get some feedback as to if this fix is logical given this issue. If it is not logical we would appreciate any other information that may help us troubleshoot this issue. The alternative is to rewrite the document generation code to output HTML, and I really do not want to do that.
We are using the Adobe Acrobat 9.4.5.236 add-on to Firefox 10.0.3, Adobe Reader 9.4.0, and Internet Explorer 8.0.6001.18702. All of these versions are not able to be upgraded, meaning this is the baseline we have to support. We also operate, still, on Window XP Professional Service Pack 3.
One last comment, client side operations by the user are not valid solutions either. I have already suggested asking the user to uncheck the open in browser option in Adobe Reader but our customer does not find that to be a valid solution. To date we have not been able to recreate the issue when the PDF is opened in Adobe Reader proper and not the browser.
Thanks again for any help and information.

In case someone, other than me, stumbles across this post. The solution I suggested in the opening post did not work. When a user opens a PDF using the Reader Plug-in in Firefox they still have the potential to see the previous PDF. The interesting thing is, as it appears right now, that this only occurs when a user closes a Firefox tab that contained the previous PDF and then triggers a different PDF to be opened in Firefox. What seems to be happening is that the Reader Plug-in ignores the file it is supposed to open and recycles the PDF that was in that tab before it was closed. Which is funny because the URL of that tab points to the new file that was downloaded into the temp directory but the contents of the tab is still the previous PDF. Not sure if the plug-in just doesn't clean out the previous contents or what but it clearly is an issue that resides in the Adobe Reader Plug-in for Firefox.
I am not sure what we are going to do at the moment but if we find a solution, other than don't open the PDF in Firefox, I will be sure to post it here. However, for right now there is nothing coming to mind.

Variable names display problem

I have three transparent text captions that are set to display from slide 1 through to slide 32 (using the option "display for rest of project").
The variables I am displaying are:
In the header:
$$cpInfoProjectName$$ - displays the name of the lesson module.
$$cpInfoCurrentSlideLabel$$ - displays the name of the current slide.
And in the footer:
Page $$cpInfoCurrentSlide$$ of $$rdinfoSlideCount$$ - displays the current slide number and the total number of slides in the lesson.
The problem is that the variable names display long enough to look somewhat unslightly. It might be for about 1/3 of a second but it is long enough to screen capture (attached just in case I am not clear enough in my description) this appearance before they resolve into their values.
This is rather annoying, since a student will see this occur for every slide.
Is there anything that can be done to fix this? Perhaps using a text caption is not the best way to display these variables?
Hmm... I wonder if creating a small persistant flash insert would be better?

I have seen that aswell Shawn. It seems like the variables are a bit slow to be populated with the correct value and then it will show the $$variable_name$$.
A Flash component would solve it and it won't take more than 5 minutes to make them all.
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

How to make a field in custom screen as display field in screen exit

Hi ,
I have created a screen exit for CO02 with a field for item text in header level as input field , when value is given and save button is cliked it gets updated in database but the problem is same field shows as input field in CO03 ( display mode ) .
Code which i have used .
in PBO
if sy-tcode = 'CO03'.
loop at screen .
if screen-name cs 'SUBSCREEN' or screen-name cs 'RESB-POTX1'.
( subscreen - screen name given in screen editor and resb-potx1 field name given in screen editor )
SCREEN-INPUT = '0'.
modify screen.
endif.
endloop.
endif.
and even i tried in PAI too .....
if sy-tcode = 'CO01' or sy-tcode = 'CO02'.
update resb set POTX1 = RESB-POTX1
where aufnr = i_aufnr.
elseif sy-tcode = 'CO03'.
*oop at screen .
*f screen-name cs 'SUBSCREEN' or screen-name cs 'RESBD-SORTF'.
SCREEN-INPUT = '0'.
modify screen.
endif.
endloop.
endif.
but itshows as input field only ........how to make that custom field as display field in CO03

HI Andy,
Try this out.
FIrst check the sy-dynnr, if it is same as your custom screen number
in PBO of your custom screen
if sy-dynnr = 'YOUR_NUMBER' and sy-tcode = 'CS03'.
loop at screen
if screen-name = 'YOUR_SCREEN_NAME'
screen-input = 0.
modify screen
endif
endloop.
endif.
if it wont work they try using Tcode SHD0
Hope this will serve your purpose.
Regards
Ramchander Rao.K

Incorrect screen name displayed

Similar Messages

Maybe you are looking for