Incorrect SIDs on transactional records

Hello,
We recently did a system copy of our BW production system to our BW QA system.
I then did a delta init and delta load into one of the cubes, without reloading master data first. After this, I noticed that all of our transactional data is appearing under the wrong Material (0MATERIAL).
When I look at the SID on the transactional record, it is different than the data copied over from production. All the SIDs in the /BI0/XMATERIAL table are the same as those in production. But the data is appearing under the wrong Material becuase the SID is different on the transactional records.
Does anyone know why/how this happened, and what we can do to repair it?
Thanks
Charla

Hi Charla,
First of all the SID's from the two systems in infocube will be different as you have loaded a new data in the transactional cube and also it depends upon the master data objects if present in the cube it will consider there master data also when loading the cube.
Just activate the master data and it should adjust the SID's.Then run the RSRV for the cube and it will repair the SID's of the cube also.
Also if you loaded a fresh data in the master data then it will work fine but if you have copied it from production then delete it and reload it again.
Hope it helps
Thanks

Similar Messages

How to find the number of transactions recorded in R/3

Hi guys,
I wanted to know the number of all the transactions recorded in R/3 in a time period.
Points for helping.
Thanks

Hi Prasun,
You can use tcode: STAT
Regards,
Ankit

Grey screen and "incorrect number of thread records"

I think I am in trouble. My eMac will not boot and gets stuck on the great screen with the Apple logo and the spinning windmill. I have followed the instructions in the Apple help article up to but not including "archive and install". I tried the advanced secure boot and the messages I got over and over were "HFSSWAPHFSPlusBTIternalmode: catalog record #30 keylength=34 expected=144 node=15278 File ID=4 volume= Macintosh HD device=/dev/disk 0s 10"
And
"Jan31 12:00:35 Launched: /System /Library/CoreServices/Loginwindow.app/Contents/MacOS/Loginwindow Port/dev/console exited abnormally: Trace/ BPT trap"
And
Jan31 12:02:13 Launched: Getty repeating too quickly on port/ dev/ console, sleeping"
I rest the PRAM and NVRAm as instructed.
I booted from the OSX 10.4 install disk and ran the verify disk and repair disk sequences several times. It did repair a number of things but it kept coming back to "
Message was edited by: Mont Rigaud Stud
Itkept coming back to "incorrect number of thread records". Even after running repair disk again several times it came back to the same thing and said
"the volume Macintosh HD could not br repaired after 3 attempts
ERROR: the underlying task reported failure On exit
1HFS volume checked
1 vOlume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired"
What should I do? I am NOT BACKED UP! How do I back up now? Can I usean external Hard drive? I really do not want to lose my photOs, email and business files.
I am typing my question on my iPhone, so that accounts for the poor capitalization.
Thanks
Doug

Will it boot in Safe Mode? See
What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392
Takes a while to run, but it usually "fixes" problems.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
 Cheers, Tom

Create Document from Data Load and Link to Transaction Record for Long Text

Hi,
I have a DBConnect Oracle datasource which contains a large text field. I would like to build a process that will, as part of the load, create a text file from the content of this large field, upload the file into BW and create the document association with the transaction record.
Is anyone aware of a HOW-TO to create the BW document entries and upload the files using ABAP? I thought that I had seen a HOW-TO or instructions approx a year ago, but cannot locate them now.
Thanks in advance,
Mel W.

Hi,
I hope this is the how to document you were looking for:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8046aa90-0201-0010-5e99-962948c83331
-Vikram

Is it possible to get iTunes to list "Sides" of a record? Side A, Side B, etc.?

Currently I have the separate sides listed as "Disc One", "Disc Two", etc, but I'd love it if there was a way to list the sides of a record instead. I just recently got the new Dum Dum Girls record and wanted to list it by side, so the only way I could find to separate it was by "Discs". Anyone know of a way to do this?

No. You're pretty much limited by what you see in iTunes now. Anyway, probably very few people under 30 can remember music media with two sides and it isn't part of their music world (ha, with digital downloads probably even the concept of a formal album will be gone in another 30 years, and almost certainly of a physical CD [certain big computer makers are already working on that with having done away with optical drives on computers]). I just use disc numbers if I feel I must maintain the integrity of the original formatting. Either that or you'll have to use some other field such as Grouping. Whatever happens you'll need to improvise.

Ask for helps and comments for a practicing ADF sample: Entering bank transaction records

Dear experts:
I'm redeveloping a practicing ADF sample application based on an exist application system of my company.
Here is the goal for this redeveloping:
What degree of productivity can adf achieve compare to eclipse?
And hereby is a small example I began from last Monday. some progress has been achieved, but pretty lot of difficulties remained,
so I post all neccessary informations to this forum, and ask for your kind helps and comments.
Thank you all in advance!
Introduction
The X company has some bank accounts in different banks, also it’s customers may have more than one bank account in different banks. Transactions between the X company’s bank accounts and it’s new or regular customers’ bank accounts happened heavily in daily. Bank transfer records in paper form will be collected and need to be entered into an in-house Financial System(NX1) of the X company every day.
This module will implement the function of Entering Bank transactions records for NX1.
In future, this Data Entering work for NX1 will be handled by some data exchange interface automatically.
And the following implementation will be based on ORACLE XE 11g, Jdev/ADF 12c.
This link can download the document for the example, I will upload Database scripts and JDEV application files tonight.
http://223.4.132.24:8180/BlobUtilServlet?tableName=FILE_TABLE&columnName=BODY&stuffID=020010110000001481&strNO=1&type=downfile&fileName=NXDemo1.doc&directOpen=true
(The above link is a website of our own. if you meet any difficulty when access it, please let me know: [email protected]).

Hi, Timo and Frank,
Thank you all for your kind replies and sound suggestions!
Now let me talk freely on this thread-and I will limit my topic scope within this Jdev/ADF Space’s theme but maybe in a more broad perspectives. And I will separate topics into different posts to avoid over length of each post. Hope you will have enough patience to read through this some long story!
Notice: Links in this article will refer to somewhere of OTN itself or a website of our own. There is no security concern on the server. For example:
http://223.4.132.24:8180/webfavorite.do?method=index&topTag=shou_A&txtTitle=ADF
(This link is collection of internet links and some abstract for each article on ADF. Not much contents on ADF in Chinese can be found.)
What you are up to?
First of all, I need to make some introduction of myself to answer “what you are up to”.
I come from China, living and working at Shenzhen city which is close to Hong Kong. And now I am running a small software company with 20 employees, our main business is to develop database centered applications which include in-house workflow/information management systems and websites/portals for organizations.
I have a pretty strong conviction that software technology should emancipate people from routine trivial mental works, just like engines in the industry revolution free people from heavily physical works. So I have a strong inclination for everything to be “automated”.
For running a company, this “automation” will not only bring the “aesthetics of everything running by itself”, but also will mean more productivity, quality and profits.—After all, no-living stuff is always cheaper than living creatures, let alone to say human beings.
However, when we software industry tried to automate business fields for our clients, the process of making software itself was still a manpower intensive, less-automation business. and this result a expensive products.
More than 15 years ago, when I began to work in an IT department of a big organization, I got to know the Oracle Designer/Developer 2000, and have being a diligent FORM/REPORT programmer for more than 4 years. I like the concept and practice of declarative design and automated generation.
And then more years past, and I left that organization and began to run a software company myself. And during these days, the mainstream technology of software development had been web oriented, Java/J2EE which I had no idea totally. But we have other guys who had expertise on it. So I just leave these works and decisions to them. And it seemed works at the beginning.
But after several years of business operation of application development for clients, I found this was a difficult-money-earn business. Even if our guys had worked hard, project schedules’ delay, over budget, clients’ complain was easily happened. Sometime we had more projects/contracts than what we can undertake, but we dare not to hire more people. I was confused:
-Was it a common situation in this field all over the world?
-What’s the key factor should responsible for?
-Where to start to improve the situation?
I know there are many factors should responsible, it’s a complex situation. Find more talented people and give better incentives for them to work hard is one choice—but it’s also a difficult task especially for a small company like ours. So to start from easy and confine solution’s scope is:
-We have these guys now, what we can do best?
(To be continued)

SM58 Transaction Recorded Very Slow

Dear Experts,
I have many tRFC in PI system in SM58 with status transaction recorded. This seems to be because there were an unusual data (file to idoc) from 1 interface that suddenly sends more data than usual. This happens at midnight, since then we have a queue at in SM58 with many transaction recorded (until tonight).
Strange things is actually that when I try to execute the LUW (F6), the transaction could be processed successfully, even though sometimes after pressing F6, the processing time could take some time (marked by the loading cursor). When the processing time is long, I just stop the transaction, re-open SM58, then the transaction that was executed before will be in the "executing" status and then I execute LUW for the transaction again and it never takes a long time to execute it.
Trying to execute LUWs and ticking the recorded status would end up no transactions executed.
Checking in SMQS for the destination, it is rarely that the actual connection reach the maximum connection. Seeing QRFC resource in SMQS, the Resource Status shows OK.
Going to SM51 then Server Name > Information > Queue Information, there are no waiting requests.
Actually the transactions are do processed, it just they are processed very slow and this impact to the business.
What can I do when this happens? How to really re-process those recorded transactions?
Could this be because the receiver resources? How to check for this?

Dear Experts,
According to this link,
http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=145719978
"Transaction recorded" usually happens when A. processing idocs or B. BW loads.
A.If it occurs when processing idocs you will see function module "IDOC_INBOUND_ASYNCH" mentioned in SM58.
Check also that the idocs are being processed in the background and not in the foreground.
Ensure that background processing is used for ALE communications.
Report RSEOUT00 (outbound)can be configured to run very specifically for the high volume message types on their system. Schedule regular runs of report RESOUT00 it can be run for
IDoc Type and\or Partner etc..
To set to background processing for Outbound idocs do the following:
-> go to transaction WE20 -> Select Partner Select Outbound Message Type and change the processing method from
"Transfer IDoc Immedi." to "Collect IDocs".
Reading that explanations, should the setting of IDoc processing to background (Collect IDocs) is done in PI or the receiver?
If the IDocs is processed collectively, will it make the sending IDoc process faster from PI to the receiver system? What is the explanation that if the IDoc is processed collectively, it would make the IDoc sending to be faster?
Why should we use RSOUT00 report when we already have SM58, and we can execute LUWs in SM58?
Thank you,
Suwandi C.

Query using system parameter LEVEL returns incorrect huge number of records

We migrate our database from Oracle *9.2.0.6* to *11.2.0.1*
The query below throws "ORA-01788: CONNECT BY clause required in this query block".
select * from (
+select a.BOARD_ID, code, description, is_displayable, order_seq, board_parent_id, short_description, IS_SUB_BOARD_DISPLAYABLE, LEVEL child_level, sp_board.get_parent_id(a.board_id) top_parent_id, is_top_selected isTopSelected+
from boards a, ALERT_MESSAGE_BOARD_TARGETS b
where a.board_id = b.board_id and is_displayable = 'Y' and alert_message_id = 5202) temp
start with board_parent_id = 0
connect by prior board_id = board_parent_id
ORDER SIBLINGS BY order_seq;
Based from online resources we modified "*_allow_level_without_connect_by*" by executing the statement.
alter system set "_allow_level_without_connect_by"=true scope=spfile;
After performing the above, ORA-01788 is resolved.
The new issue is that the same query above returns *9,015,853 records in 11g* but in *9i it returns 64 records*. 9i returns the correct number of records. And the cause for 11g returning greater number of records is due to system parameter LEVEL used in the query.
Why 11g is returning an incorrect huge number of records?
Any assistance to address this is greatly appreciated. Thanks!

The problem lies in th query.
Oracle LEVEL should not be used inside a subquery. After LEVEL is moved in the main query, the number of returned records is the same as in 9i.
select c.BOARD_ID, c.code, c.description, c.is_displayable, c.order_seq, c.board_parent_id, c.short_description, c.IS_SUB_BOARD_DISPLAYABLE, LEVEL child_level, c.top_parent_id, c.isTopSelected
from (
select a.BOARD_ID, code, description, is_displayable, order_seq, board_parent_id, short_description, IS_SUB_BOARD_DISPLAYABLE, sp_board.get_parent_id(a.board_id) top_parent_id, is_top_selected isTopSelected
from boards a, ALERT_MESSAGE_BOARD_TARGETS b
where a.board_id = b.board_id and is_displayable = 'Y' and alert_message_id = 5202
) c
start with c.board_parent_id = 0
connect by prior c.board_id = c.board_parent_id
ORDER SIBLINGS BY c.order_seq

IDOC's in TRFC ("Transaction recorded") Problem

Dear Gurus,
BW System = SAP NetWeaver 7.40 , Sap_Basis = 7.40 - 007 , Database = Hana , 1.00.80.00.391861 , Kernel = 741 , Sup.Pck.Lvl = 31
ERP System = ERP 6 EHP 4 , Sap_Basis = 701 - 0011 , Database = Oracle , 11.2.0.4.0 , Kernel = 721 , Sup.Pck.Lvl = 401
The IDOCs we send are sitting in TRFC queues, they are not sent to the target system. I checked all the ALE settings, they are fine. The processing mode is "Immediate".
When I go to SM58 I will find the entry for the transaction with status "Transaction Recorded". If I select the entry and press F6 (Execute LUW) the IDOC is sent to the target system and the queue becomes empty.
Also " 530997 - tRFC calls are not processed in transaction SM58" job is scheduled for 2 min period but same result !
What is the problem ? It should be goes automatically.
Best Regards

Dear Kumar,
We have enough DIALOG WP defined, now we will check 1280898 note and see what happens.
Best Regards

Macbook Air froze/turned it off to restart. Now it won't restart it goes to Gray screen with apple like it is loading, but when gets to the end it turns off. Try repairing it states incorrect number of thread records.Volume Macintosh HD found corrupt

Macbook Air froze/turned it off to restart. Will not restart just goes to gray screen like it is reloading and then shuts off. Have tried everything. When trying to reapir it says incorrect number of thread records, should be 108456 instead of 108455. Invalid voume directory count/the volumbe macintosh HD was found corrupt and needs to be repaired. How do I repair it?

Hello cgstephen
You would need to contact Apple or an Apple Authorized Service provider by checking out the page below. It will have everything you need to know about setting your MacBook Air up to get it repaired.
Service Answer Center - Mac notebooks
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=Macn otebooks
Regards,
-Norm G.

SM58 "Transaction recorded" status

If the idoc has reached the destination correctly ,then it should not get displayed in SM58 ,is that correct?
if yes then,
what should be done when "Transaction recorded" status is displayed in SM58?

If the idoc has reached the destination correctly ,then it should not get displayed in SM58 ,is that correct?
if yes then,
what should be done when "Transaction recorded" status is displayed in SM58?

SM58 "Transaction Recorded"

Hi I am seeing transaction recorded status for trfc's in SM58. I am not able to process them. Please help on how to process them. I see that RFC connection is active.
Thanks.

Hi Pcrao,
Thanks for your reply,
Kindly clarify the following
1. What ABAP program i should use in the Background job. If it is RSARFCSE how will i create the variant for this program.
Also there were some entries in SM58 3 days old entries which are in Transaction recorded. should i delete those entries
Can the old entires cause any issue
regards
Naveen

Getting message "Incorrect access to store record"

Hi, I am getting message "Incorrect Access to Store Record" and the record is getting rejected. I could see no help on this in technical document. Let me know if anyone know solution for this. Thanks Murali

Murali: You are attempting to load data to an intersection of a database that is a Target intersection of a Replicated Partition. The following steps will eliminate the error, but beware the fact that the cell(s) you update will be overwritten by the next replication. <OL>1. From Application Manager, edit the partition that causes the error. 2. On the Connect panel, click on settings and check the box that reads: "The target partition can be updated". Once this box is checked and the partition is re-validated and saved to the server, data can be loaded into the Target Partition.</OL> Again, beware the next replication!

Issue with the MIGO transaction recording

Hello All,
I am working on the MIGO transaction(Goods receipt purchase order) and i am doing the recording for this transaction but it is not recorded properly, the same screen information is recording twice even though i was given only one entry for that item.
what i am doing is i am just entering the document number and then the document date . After entering this header information i am
entering the quantity in unit of entry field and then clicking on the distibute qty icon.Later after distributing the quantity i am saving the data.
This is what i am recording but the same code is repeting twice in the recording. Can anyone suggest what will be the reason.
Thanks.

Hi,
MIGO is use Enjoy transaction so there will be always problem with BDC.
I will suggest you to use BAPI for same.
Thanks.
Dhiraj,

I want to delete the transactional record from database table

Hai,
I want to delete the transactional data from database table with out using the dialog programming is it there any trancation for this.
for master data we have the transaction code for delete the records. The t.code is 'OBR2'.
Plz help in that cse.
Thanks and regards,
P.Naganjana Reddy

Hai,
Plz help me urgent.
I am asking i want to delete transactional data from database table without using the dialog programming.
Thanks and Regards,
P.Naganjana

Incorrect SIDs on transactional records

Similar Messages

Maybe you are looking for