Incorrect SLA profile picking in the transaction

Hi Friends,
Need very urgent help….  we are implementing incident management.  As business requirement I have maintained two types of transactions – one for SAP incidents and another for Non-SAP incidents. I have configured two different SLA profiles for two transactions (SAP / Non-SAP) but when I create SAP Incident, it is taking NON-SAP  SLA profile & Response profile.
I have created two different service materials (INVESTIGATION & INVEST_SAP) for both transactions but always taking INVESTIGATION. Could anyone help me it’s very urgent …. .
Thank you
Regards
Sai

Hello Sai,
Please follow the guide Incident Management: SLA configuration hints for SAP Solution Manager 7.1
BR,
K.

Similar Messages

  • Error - No date profile assigned to the transaction/item category

    Dear Expterts,
    I am getting the error while trying to create a complaint (In-house repair) transaction.
    No date profile assigned to the transaction/item category
    Message no. CRM_BILLING015
    System Response
    Billing dates cannot be maintained.
    Procedure
    Assign a date profile to the transaction type or item category in Customizing.
    Make sure that this date profile contains all the necessary date types:
    BILL_DATE
    INVCR_DATE
    date profiles are assigned to both transaction type and Item category. mentioned date rules are in place in standard configuration itself. still the problem persist.
    Please help me to resolve the issue. Your help will be highly appreciated.
    Best regards
    Raghu ram

    Hi Pepe,
    Thanks for the response, these transaction types are already there. and 'Today' date rules are assigned to both date types.
    Still the problem exist.
    Best regards,
    Raghu ram

  • For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

    For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
    We are getting below error.
    The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
    COuld anyone please help us to know, How it can be resolved?
    We also have this below error.
    System Response
    If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
    If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
    Procedure
    The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
    Procedure for System Administration
    Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
    Additional Information:
    System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
    No authorization to log on as a trusted system (Tr usted RC=0).
    /TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
    For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

    If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
    Hope this helps.
    Thanks!
    Jhero

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • Incorrect product in the transactional cube for opportunity planning data.

    Hi,
    We're loading our Opportunity planning data of  CRM  in a transactional cube in BW side. Later this transactional cube data is then uploaded into a standard cube.
    For an opportunity, user enter some planning data for a given product (A). which was duly stored in transactional and then later in the standard cube.  Then  user deleted the product (A) and entered a new product (B) on CRM side.  However in the transactional cube, records for the previous product (A) also exist and the same flows to the standard cube as well.
    Fyi, delta load mechanism is in place for loading of both types of cubes.
    Could someone throw some light why the old item (product A) is still there in the cubes. coz this gives a wrong picture in the report, though the key figures for product A  are 0.
    Regards,
    Nagendra.

    A daily compression would remove the loading details of the cube that are visible to us for any back-tracking, Normally we do the compression for load requests older than 2 weeks.
    But the suggestion is good, incase i do not come up with any other soln, will think of implementing this.
    Maybe my delta load knowledge is not good enough.
    Please answer the following.
    What happens, when we're using standard data sources (with delta load) for loading data from (say) CRM to BW and for a given header guid, a item guid record is later deleted in CRM. On BW side, whether this item_guid record will still be present in the cube or be deleted.
    Regards,
    Nagendra.

  • NAMED_SEQUENCEs: The transaction is no longer active

    Hi all,
              I am currently trying to get Petstore 1.3.1 going on WLS 7.0.0.1 an got
              into quite some trouble (btw, does anyone have experience with this
              cofiguration?). After successful deployment in /application I tried the
              "populate database" link on ~/petstore/index.jsp and got:
              java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
                   at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
                   at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
                   at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
                   at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
                   at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
                   at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
                   at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
                   at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
                   at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
                   at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1723)
                   at java.lang.reflect.Method.invoke(Native Method)
                   at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
                   at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
                   at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
                   at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:155)
                   at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.createAddress(AddressPopulator.java:94)     at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.access$7(AddressPopulator.java)
                   at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator$1.create(AddressPopulator.java:73)
                   at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:145)
                   at org.xml.sax.helpers.XMLFilterImpl.endElement(XMLFilterImpl.java:595)
                   at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:158)
                   at weblogic.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1411)
                   at weblogic.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1613)
                   at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1219)
                   at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
                   at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
                   at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
                   at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
                   at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.populate(PopulateServlet.java:162)
                   at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doPost(PopulateServlet.java:118)
                   at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doGet(PopulateServlet.java:106)
                   at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
                   at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                   at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
                   at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
                   at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
                   at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
                   at com.sun.j2ee.blueprints.signon.web.SignOnFilter.doFilter(SignOnFilter.java:151)
                   at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
                   at com.sun.j2ee.blueprints.encodingfilter.web.EncodingFilter.doFilter(EncodingFilter.java:77)
                   at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
                   at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5366)
                   at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
                   at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
                   at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
              and similar traces for ContactInfo, CreditCard, Account, Profile, ...
              I nevertheless get to the main screen of the Petstore as if everything
              worked well. In fact, it seems like the DB got populated somewhat
              correctly; only tbe named sequence tables are unchanged (btw: are the
              named sequence tables expected to be auto-created with
              create-default-dbms-tables enabled?). The strange thing is that every
              correct row (in my case having the even IDs) is followd by an all (except the
              odd numbered ID field) "NULL" row. This does not happen in all
              ...EJBTABLEs --- Address and ContactInfo for example are affected, but Profile
              is not.
              It seems as if ordering a rattlesnake would work well, even though more
              of the same type of Execptions appear in the jdbc log. I suspect that the
              trouble will start when the 10 cached ID are exhausted.
              I just tried the Petstore 1.3 example provided with WLS 7.0.0.1 on a Linux
              machine and WLS 7.0 on an NT machine andfound petty much the same
              exception after enabling the jdbc log:
              java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
                   at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
                   at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
                   at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
                   at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
                   at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
                   at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
                   at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
                   at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
                   at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
                   at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1755)
                   at java.lang.reflect.Method.invoke(Native Method)
                   at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
                   at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
                   at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
                   at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:86)
                   at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPoCMRInfo(PurchaseOrderHelper.java:116)
                   at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPO(PurchaseOrderHelper.java:164)     at com.sun.j2ee.blueprints.opc.ejb.MsgBean.doWork(MsgBean.java:103)
                   at com.sun.j2ee.blueprints.opc.ejb.MsgBean.onMessage(MsgBean.java:72)
                   at weblogic.ejb20.internal.MDListener.execute(MDListener.java:348)
                   at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:282)
                   at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:263)
                   at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2309)
                   at weblogic.jms.client.JMSSession.execute(JMSSession.java:2232)
                   at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
                   at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
              Is there a problem with my general setup maybe, or is this exception to
              be ignored? Is that a known issue with Petstore 1.3/WLS7?
              Kai
              

    Tyson Norris wrote:
    Hello -
    We are attempting to use a design where a connection will remain in use over multiple
    transactions.
    Is there any way to get weblogic to allow this?No, at least not jts connections. Non-XA connections need our management to
    ensure all the work gets committed or rolled back atomically. It doesn't
    cost anything to always obtain jts connections in the context of the tx
    they are needed.
    Besides XA, you could get a plain non-transactional connection and do your
    own jdbc commits/rollbacks...
    Joe
    >
    We are currently experiencing the stack trace below, when a database read is
    attempting to use the same connection as the previously committed tx.
    Thanks for any advice.
    Tyson
    org.springframework.jdbc.UncategorizedSQLException: (HibernateAccessor): encountered
    SQLException [The transaction is no longer active - status: 'Committed'. No further
    JDBC access is allowed within this transaction.]; nested exception is java.sql.SQLException:
    The transaction is no longer active - status: 'Committed'. No further JDBC access
    is allowed within this transaction. java.sql.SQLException: The transaction is
    no longer active - status: 'Committed'. No further JDBC access is allowed within
    this transaction. at weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:118)
    at weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:127)
    at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:324) at weblogic.jdbc.wrapper.JTSConnection.prepareStatement(JTSConnection.java:426)
    at com.benefitpoint.cmp.hibernate.AbstractDataManager$2.doInHibernate(AbstractDataManager.java:501)
    at org.springframework.orm.hibernate.HibernateTemplate.execute(HibernateTemplate.java:150)
    at com.benefitpoint.cmp.hibernate.AbstractDataManager.execRawSqlPreparedStatement(AbstractDataManager.java:568)
    at

  • Petstore 1.3.1 NAMED_SEQUENCE problem: "The transaction is no longer active"

    Hi all,
    I am currently trying to get Petstore 1.3.1 going on WLS 7.0.0.1 an got
    into quite som trouble (btw, does anyone have expereince with this
    cofiguration?). After successful deployment in /application I tried the
    "populate database" link on ~/petstore/index.jsp and got:
    java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
         at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
         at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
         at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
         at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
         at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
         at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
         at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
         at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
         at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
         at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1723)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
         at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
         at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
         at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:155)
         at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.createAddress(AddressPopulator.java:94)     at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.access$7(AddressPopulator.java)
         at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator$1.create(AddressPopulator.java:73)
         at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:145)
         at org.xml.sax.helpers.XMLFilterImpl.endElement(XMLFilterImpl.java:595)
         at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:158)
         at weblogic.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1411)
         at weblogic.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1613)
         at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1219)
         at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
         at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
         at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
         at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
         at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.populate(PopulateServlet.java:162)
         at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doPost(PopulateServlet.java:118)
         at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doGet(PopulateServlet.java:106)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
         at com.sun.j2ee.blueprints.signon.web.SignOnFilter.doFilter(SignOnFilter.java:151)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
         at com.sun.j2ee.blueprints.encodingfilter.web.EncodingFilter.doFilter(EncodingFilter.java:77)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5366)
         at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
    and similar traces for ContactInfo, CreditCard, Account, Profile, ...
    I nevertheless get to the main screen of the Petstore as if everything
    worked well. In fact, it seems like the DB got populated somewhat
    correctly; only tbe named sequence tables are unchanged (btw: are the
    named sequences expected to be auto-created with
    create-default-dbms-tables enabled ?). The strange thing is that every
    correct row (in my case having the even IDs) is followd by an all (except the
    odd numbered ID field) "NULL" row. This does not happen in all
    ...EJBTABLEs --- Address and ContactInfo for example are affected, but Profile
    is not.
    It seems as if ordering a rattlesnake would work well, even though more
    of the same type of Execptions appear in the jdbc log. I suspect that the
    trouble will start when the 10 cached ID are exhausted.
    Any ideas?
    Kai

    I just tried the Petstore 1.3 example provided with WLS 7.0.0.1 and found
    petty much the same exception after enabling the jdbc log:
    java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
         at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
         at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
         at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
         at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
         at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
         at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
         at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
         at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
         at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
         at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1755)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
         at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
         at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
         at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:86)
         at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPoCMRInfo(PurchaseOrderHelper.java:116)
         at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPO(PurchaseOrderHelper.java:164)     at com.sun.j2ee.blueprints.opc.ejb.MsgBean.doWork(MsgBean.java:103)
         at com.sun.j2ee.blueprints.opc.ejb.MsgBean.onMessage(MsgBean.java:72)
         at weblogic.ejb20.internal.MDListener.execute(MDListener.java:348)
         at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:282)
         at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:263)
         at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2309)
         at weblogic.jms.client.JMSSession.execute(JMSSession.java:2232)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
    Is there a problem with my general setup maybe, or is this exception to
    be ignored?
    Kai

  • Portal Runtime Error while checking the Transaction in Portal

    Hi all,
    We r in the phase of setting the configuration of Portal. We did the the template installer but when iam checking the transactions in Portal ( System Administration--> Support--->SAP Apllication) , it is throwing me the following error.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Missing Property 'ClassName' in property file for layer'Transaction/WinguiSSOLayer'..
    See the details for the exception ID in the log file
    Can anybody help me in this regard.
    Thank in Advance.

    Hi Niyati,
    I guess check through -->
    Under "Personalize > User Profile" the checkbox "Activate Accessibility Feature" must be unchecked!
    as, people earlier also faced this issue and SAP provided this solution.
    Also an alternative solution for this is like --
    Go to:
    <Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\property\Transaction
    and see the content of the 'WebGuiSSOLayer.properties' file.
    One of the entries is ''ClassName'. The value on a 'valid' portal is: com.sapportals.portal.sapapplication.itsdetection.ITSDetectionLayer
    If it's not the case, then go to:
    <Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
    rename the file 'com.sap.portal.appintegrator.sap.par.bak' to 'com.sap.portal.appintegrator.sap.par' open the par file and edit the file ''WebGuiSSOLayer.properties' (add the relevant entry for ClassName).
    Save the file (still with the par extension)
    Restart the portal (if everything is OK then the bak extension will be added to the filename).
    Just try this, hope it works.
    Reward points if helpful
    Regards,
    Shailesh Nagar
    Edited by: Shailesh Kumar Nagar on Jan 22, 2008 7:16 AM

  • Doubt in layers of the Transaction

    Hi Gurus,
    Can anyone explain what is the difference between following 4 at the transaction level. How each individual will helpful in the transaction process....
    1) Item Categories.
    2) Item Category Group
    3) Item Categories Usages
    4) Item categories Determination.
    With example is greatfull......
    Regards,
    Sap Adherent.
    Moderation: Kindly search before you post

    Hi Pepe,
    Thanks for the response. 
    As you mentioned they have different statuses.
    In the status profile they maintained the lower and higher values (1-10) for all the listed.
    So, does this impacts the visibility of the drop down?
    I thought that, it (high/low) only acts not to allow the user to change the statuses from bottom to top.
    Regards,
    Fedor.

  • Error while executing the transaction QC22 (Quality Certificate for Batch)

    Hello Friends,
    While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
    Message no. ZQ010
    Diagnosis
    Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
    System Response
    The missing charactertistic will not be printed on the certificate,
    Procedure
    Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
    One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
    As i am new in QM, kindly explain we were to maintain the certificate profile.
    Waiting for the experts inputs.
    Thanks and Regards,
    Jitendra Chauhan

    Hi
    Try with QA33 you may have display authorization,  or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
    Regards
    Naveen.
    Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM

  • Dump in the transaction J2I6 in ECC 6.0

    Dear all,
    I am getting a dump in the transaction J2I6 when i select the radiobutton RG23D and then give the excise group,start date and enddate.When I select the radiobutton Excel Format ,it throws a dump as follows:-
    Packed field contains incorrect BCD format.
    Error anakysis says that ''An arithmatic operation in the current program J_2IRG23 attemps to process a field of type P that contains an invalid BCD format.
    What can i do?plz help

    Hi,
    There are some OSS notes related to your problem.
    Pls check the OSS NOte 1096189. It may resolve your problem. Other related notes are 1155341.
    Please check which one is relevant to your system.
    Regrads,
    Lokesh./
    Edited by: Lokesh Tarey on Apr 22, 2010 3:24 PM

  • HP Photosmart Plus B209 - will not print photos - tray is not picking up the paper

    The printer will not grab the photo paper when I attempt to print a picture.  It works just fine when printing other things, such as text from WORD or something from the internet.  Photo paper says "single sheet feed" on it, so I place one sheet in the tray.
    Any ideas?  Am I doing something incorrectly?  Thanks

    Hi hgr7,
    I understand that you are having an issue with the photo tray picking up the paper. I will try my best to help you with this problem. In this document for The All-in-One Does Not Pick Up or Feed Paper From the Photo Tray there are several steps to resolve this issue.
    I hope this helps, let me know.
    Thank you,
    I worked on behalf of HP.

  • Change the status profile assigned to the line item from PROFA TO PROFB

    Hi Experts,
    The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
    Item Category A -> Status Profile PROFA
    Item Category B -> Status Profile PROFB
    For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B.  However the status profile still remains PROFA.
    We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
    any quick inputs from any one please......
    Thanks in advance
    hemanth

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • Authorization problem when using the Transaction Launcher

    Hi All,
    We have an authorization problem when we call a transaction (EL37) in ECC from the IC Web Client.
    We believe that we have done all the necessary customizing in CRM and when we press the link in the Navigation Bar we are asked to logon to our ECC system. After logging on, we get an error message saying that "You do not have authorization for transaction EL37". If I then enter the transaction directly in the white command field in top of the ECC screen, then I have no problem calling the transaction.
    My user has SAP_ALL, so it shouldn't be a problem with the authorizations. Maybe it has something to do with the transaction IC_LTXE? I have also tried to add this transaction to my user profile, but that didn't help.
    Does anyone have a suggestion for how to fix this problem?
    Kind Regards,
    Gitte.

    Hi,
    I have found the solution for the problem myself. The transation code in the Transation Launcher Wizard must be written in capitals! We had entered 'el37' and have now changed it to 'EL37'.
    Best Regards,
    Gitte.

  • Assign User Profiles and Web Interface Transactions to Users

    Hi EM Gurus,
    Has anyone worked with not standard scenarios in SCEM?
    They are working well but I can't access them on interface web.
    In selection page (search page after logon), where choose tracking scenarios, only standard scenarios appear although I have assigned both scenarios to the user and made same configuration; Assigned and Defined Web Interface Transactions, Configured Fields for User Profiles, Defined User Profiles, Assigned User Profiles and Web Interface Transactions to Users.
    But only Standard Scenarios appear as choice of tracking scenarios that are displayed to the user as a dropdown box on the selection screen after logging on to the Web interface.
    Has anyone accessed not standard scenarios on interface web??
    Help, please!
    Thanks a lot.
    Rodrigo Freitas

    Hello Rodrigo,
    if you have assigned the scenarios to your user in transaction /SAPTRX/UCUSER you must go to the admin page and reload the profile manager.
    /admin in the URL of the WCL instead /ehsearch.
    Afterwards you should see them also in the drop-down box.
    Best regards,
    Steffen

Maybe you are looking for

  • I just sent the following to the President of Verizon

    Dear Mr. Mead, Thank you for taking the time to read this email.  I wanted to let you know what has transpired with my account in the last few months.  I currently use a phone provided by my company, therefore, we only have two phones on our account.

  • Logon Failed using Crystal Report XI

    I wrote a VB 6 app that has the CRViewer and calls (.rpt's). The ".rpt's" use a MS Access 2003 database. This database DOES NOT have any security in the way of passwords. This application runs on a "stand-alone" system NO SERVER IS INVOLVED. The prog

  • Using airport extreme in china - can't get it to work

    I just moved to china and have been trying to set up a new Airport Extreme dual band to my high speed internet connection but can't get it to work (bought the AE in the US and worked fine there). I have a Green light on the physical AE, and in Networ

  • Unable to launch burn dvd applicatio​n in my windows media center

    unable to launch burn dvd application in my windows media center

  • How can i keep the optimize settings in Muse

    Hello I just uploaded a web site www.coopdebici.com I was very carefully optimizing the images in adobe photoshop, and make them always at 100%. When the web site was oline i takes a lot to charge some images and i just realized that Muse increase a