Incorrect Status in Pricing issue_short dump
Hi,
All of sudden when we create sc non catalog, its giving short dump. Its uncaught exception ie Its CX_BBP_PD_ABORT exception..only error message that i found relevant is " incorrect status in pricing".. I checked IPC and its active and running..
I did manual check for IPC (simulation of pricing using manual check) and it gave the same "incorrect status in pricing"
Did anybody came across this issue.. Is this something to do with UOM's? I was able to create catalog sc and internal goods/services based sc...only non-catalog sc is giving short dump..
I searched couple of notes and couldn't hit the right one and i dont want to activate simplified pricing so that we can avoid IPC altogether.
Appreciate any hits/clues..
Thanks
Krish
Hi Robin,
Thanks for reply. We are on SRM Server 5.5.
I am wondering if this error is something to do with any missing UOM's in SRM. I see one message in these short dumps..
"ST" physical unit not available"..
Already checked 781669 note..but it seems this is old note and not applicable..as we are already on SAPKIBKT11 patch level.
Raised OSS and waiting for reply.
Thanks
Krish
Similar Messages
-
Dump in production system :Incorrect status in pricing
Hi All,
We have patched out SRM5.5 server system recently with 15 and 16 patch.
After the patch we are getting many dums in production system.
When i check in the ST22 ,the error syaing that
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
*Incorrect status in pricing*
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_BBP_PD_ABORT"
"SAPLBBP_PDH" or "LBBP_PDHU08"
"BBP_PD_ABORT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
and i have checked the IPC ,it is also active only,.
We have got his issue all of suddenlly,
Can any one tell us what could be the issue.
Regards
cbHi All,
thanks a lot for your response ,
I have done the Simulation which shows everything is fine and i have chcked with BBP_CND_CUSTOMIZING_CHECK t-codes even that is also correct only .
we are plannning for rasing the issue with SAP.
Besides that the system might have activated the BADI simple pricing active (or something like that). This would give trouble as well with the IPC (they can't both be active).
@Robin which the badi we can check.
once agina thanks a lot for your replys.
Regards
cb -
Errror when in SC ( Incorrect status in pricing )
Hi Experts,
Please advice what I done wrong in customization. I'm configuring system to Classic scenario.
When i try to add items to shopping cart I'm getting the following error. Pls advice me what settings i have to done for the below problem.
Thanks and regards
Hardhik.
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_BBP_PD_ABORT
Date and Time 06.01.2002 17:00:54
Short dump has not been completely stored (too big)
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_BBP_PD_ABORT' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLBBP_PDH' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Incorrect status in pricing
Missing Handling of Application Exception
Program SAPLBBP_SC_UI_ITS
Trigger Location of Exception
Program SAPLBBP_PDH
Include LBBP_PDHU08
Row 73
Module type (FUNCTION)
11Normally, this dump happens when BBP_CND_CHECK_CUST transaction is
carried out and there is an IPC (Internet Pricing Configuration )
incident.
In this case, you have to pay atention in the following details:
Have you attempted restarting the IPC? Are you using the correct
version (note 533877)? Is the IPC active ? Is IPC running in VMC (
Virtual Machine Container) ?
Otherwise, the reason could be that the VMC installation have been
corrupted:
I.e: certain files were missed in the installation. Therefore pricing,
and consequently shopping cart creation fails.
For a quick solution I propose to apply the latest AP 7.00 pricing
patch from service marketplace (please follow note 880749 how to apply
an AP patch). As a patch is always a full installation of all required
Java parts, pricing should work fine afterwards.
Additional notes to take a look:
673372 - explains about the Short dumps UNCAUGHT_EXCEPTION in SRM 3.0,
4.0, and 5.0
Regards,
Daniel
- if helped please give points - -
Incorrect status in pricing in process SC.
Hi masters.
the vesion SRM 7.0 was updated the version SP5 to SP8 of ABAP and other components like java. after that changes the sistems was Ok. but now no working when try make sc since catalog or free text the sistem show a dump Incorrect status in pricing.
ran the transaction bbp_cnd_check_cust
and no show problem since catalog price simulation or manual price simulation.
some idea what happening.
thanks.
Edited by: Oscar vazquez on Nov 26, 2010 7:33 PMHello,
I have seen this issue solved after executing the following procedures:
- Restart the VMC;
- Update to the latest AP pricing patch.
Kind regards
Ricardo -
Error message "incorrect status in pricing"
When creating a shopping cart based on free text, the system aborts with the above mentioned message and "The termination type was: RABAX_STATE" . We can not find the problem. When we run BBP_CND_CUSTOMIZING_CHECK, we get the same error message when we simulate manual pricing. We can however create a shopping cart based on product. When we run RSVMCRT_HEALTH_CHECK we get 4 green lights, so the basis installation seems correct. If you have any suggestions, please let me know.
Ed Muhlradt
IFFHi
<b>What is the error dump details in ST22 Transaction ? Please paste the same here.</b>
Other related points to check ->
Please check the unit of Measures are correctly maintained in the T006 table.
The problem can be solved by implementing a program correction from the following note :
781669: Correction of BBP_CND_CUSTOMIZING_CHECK
Please refer to following SAP Notes:
Note 860935 - pricing customizing exits are missing
Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
Note 1024374 - Unexpected pricing error for pricing irrelevant item
Note 992259 - NullPointerException in Command GetFilteredCsticsAndValues
Note 860935 - pricing customizing exits are missing
Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
Note 854170 - Activating the component "VM Container"
Note 593109 - Short dumps UNCAUGHT_EXCEPTION in SRM 2.0 (EBP 3.5)
Note 880749 - Patching of VMC based AP 7.00 engines
Note 854170 - Activating the component "VM Container"
Note 844816 - Information for Upgrade from IPC 4.0 to SAP AP 7.00
Note 854170
Note 844817
There must be some problem with VMC. Most probably java connection problem.
Pl run program RSVMCRT_HEALTH_CHECK in SE38. You should see green for all 4 messages in the result. Try implementing the latest IPC patches following the instructions from note 880749, then restart the VMC.
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
[/code]
Hope it helps.
Please reward full points, incase it suits your requirements.
Incase it does not help, please raise an OSS message with SAP.
Regards
- Atul -
Hi experts,
we are on srm7.02 classic scenario,dump occurs when creating shopping cart.
regards,
srinivashi ,
Srinivas
if the SC type is free text, then Maintain "ST" dimension, this is mandatory if you want to procure free text item using shopping cart
to activate the simple pricing follow the note 1359426
Regards,
kiran -
Incorrect status in FM report for paid invoices
hello,
I'm working in ECC 6.0 with Former budgeting.
I have several invoices which are created in 2008 but paid in 2009 or in 2010. There are then different fiscal year impacted.
When the invoices are paid, they don't have the value type Payment - Amount type Paid in FM report (FMRP_RFFMEP1AX - All Postings). The invoices still have the status Invoices Original.
As the invoices dont have the status Paid, they are carryforwarded to the next year.
How can I correct that?
When I use the transaction FMF0, the invoices are updated with the current year (2011) in FM report.
And this is not correct.
Is there any customizing to avoid the incorrect status of paid invoices in FM report?
Thank you for your help,
Kind regards,
ChiachenHello Chiachen
Please, check your settings in t-code OF29: do you have the flag 'Deactivate check on fiscal year change' On? if you have this flag marked, this could be a reason why you are facing this issue.
You can find good information in the F1 help of such field.
In addition, please review note[400924 Recommendations and rules for the payment transfer in FM|https://service.sap.com/sap/support/notes/400924]
cheers
Mar -
There are IDocs with incorrect status.How to rectify it?
Hi All,
I was trying to do full load for 0vendor_attr.
The error message is getting displayed as mentioned below:
" Error when updating Idocs in Source System*
Diagnosis
Errors have been reported in Source System during IDoc update:
Incomplete control parameter for commmunication wi
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here using the BW Monitor.
Removing errors:
*How you remove the errors depends on the error message you receive." *
Please revert.The Error messages in detail:
Incomplete control parameter for commmunication with the BW system
Diagnosis
The control parameters for communication with the BW server are not
complete. A BW PlugIn upgrade could be the cause of the problem.
System response
Procedure
Depending on the Release of the BW server, proceed as follows:
BW Server Release 1.2B: Source system: Update InfoSource metadata
BW Server Release >= 2.0A: Source system: Activate
Please revert at the earliest what needs to be done int his case. -
Posting run cannot be posted Incorrect status
Hi,
we are running transaction for Posting to Accounting : Create Posting Run.
For many employees the posting was done properly but few says No Document Created. and the error
Posting run cannot be posted : Incorrect Status is flashed.
Please shed some light on this... What should be the error?Hi,
when u run the tcode for posting
- enter Payroll area
- Give" S" in "" Type of document creation""
- Enter the posting variant
Execute
- If you get the error in initial screen
click on the red button -
u'll get a message.
doubleclik and you'll get the details of the error.
Else
-Goto Document Overview
Double click on the line
- Go to the bottom of the document and you can read the error.
Double click on red button anu u'll get the detail.
Hope this helps.
Regards,
Param -
Oracle contracts generating incorrect start dates/pricing
Hi,
Oracle contracts generating incorrect start dates/pricing
Semi Annual Invoices being automatically generated with the incorrect start date/pricing.
We have 8 years of pricing instead of 6 yrs. Contracts are being terminated and recreated to correct immediate billing issues.
Please help me out Why Oracle contracts generating incorrect start dates/pricing.
Thanks In Advance,Which Apps release is this happening in?
-
Process chain status shows incorrect status
When ever i receive bad data requests from R/3, BW pulls the error requests into a separate PSA and pass-thru the good once in another PSA and then into datatarget.
However the overall status is green for the job/package and the package when executed in ProcessChain does not show an errors. But the errors are not noticed until user notices it in the qyuery.
How to capture such errors and notified, is their any automation possible? I have setup e-mail on process chain failures but these kind of errors are not captured because the overall status of request is GREEN.
Here is the status on infopackage.
Incorrect data records - error requests (total status GREEN)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target and can be used in reporting.
The incorrect records were not written to the data target, but were posted retractively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors, and post the error requests.Hi Gopikrishna,
Please check if "Error Handling" in the Update Tab of your Infopackage has been enabled, I guess it is.
If this has been enabled , then the error recs will be isolated and only the Correct records will be posted into the Data Target. It is the responsibility of the BW Administrator to identify such errored records, correct them and Post it back to the DAta target. Because error handling is used, the Monitor will show Green, as all the error recs have been separated.
To avoid this, you have to remove Error Handling from the INfopackage, then you will see the Load failing and the Process Step in the process chain would turn RED with the corresponding error messages.
Regards,
Praveen. -
Hi, a cordial greeting.
I turn on this opportunity to present a case being presented with the subsequent delivery split.
Then the details:
1.- We have a couple of deliveries (A and B) in a shipment.
2.- To one generates a TO (A), but for the partial quantity of each item delivery. The other delivery (B), was not generating any OT.
3.- It confirms the previous OT.
4.- Delivery (A) that were processed its partial quantities, we made subsequent delivery split. It uses the BAPI BAPI_OUTB_DELIVERY_SPLIT_DEC.
5.- According to the split profile, confirmed quantities, are in the original delivery (A). The delivery result of the partition, it´s excluding from shipment, and the original delivery which keeps the split remainder, remains in the original shipment.
6.- The new delivery (C) is generated with the items and quantities that were not included in the TO of the first delivery (A).
7.- In this delivery (C), it sets the Transportation Planning Status as Completely Processed (VBUK-TRSTA = "C") at the header, but this is not included in any shipment.
Described the situation, the problem occurs in the Transportation Planning Status that is fixed in the new delivery, which is incorrect, since it should set the status Not Processed (VBUK-TRSTA = "A").
It should be noted, that if the subsequent split delivery is effected by the VLSP transaction to delivery to the above conditions, the new delivery fixes the Transportation Planning Status like No Processed.
Appreciate the help you can offer in this case.
GreetingsDear,
Update VBUK-TRSTA field-by-field.
Under the following conditions, the update should not run in the update task:
If indicator "Execute billing" is set in the activity profile and new deliveries have been included in the transportation; or
if indicator "Execute billing" is set in the activity profile and the overall status of the shipment cost calculation of the transportation has changed.
Also note Customer-specific rules for the specification of the transportation planning status can be taken into account with user exit EXIT_SAPLV56U_007.
Regards,
R.Brahmnkar -
Reverse Document Error showing as incorrect status
Have posted the document for the month of november 2009 through HR-FI integration. After that tried to reverse the same but that time period was not open and its showing as Incorrect reversal. But after opening the particular period and trying to reverse the same document but its showing that since the status is incorrect it cannot be reversed. Now i want to reverse those documents? how to resolve this?
SureshHi,Kumar,
I have the same problem, so could you tell me how to solve this problem?
Thanks a lot.
Olivia Yang -
E-Rec 6.04 Incorrect status of external candidate user password.
Hi,
We are on E-Rec 604 with seperated standalone e-rec system.
I have a problem with the password of external candidates. When an external candidate is registered in the application, introduce user and password and all mandatory fields and all work ok. He can enter in his profile, introduce all fields, apply offers, etcu2026
But when he log off and try to access again, the password is incorrect. If the external candidate Request a new password all works ok and when introduce this one and change this initial password, this new one let him to access in the future login in the correct way.
I realized that this is because the USER in R3 of the external candidate is cretaed with the field Password Status set to Initial password (set by administrator) and I think it is wrong, the status must be Product. Password. Instead, when request new password and set the new one the field status is Product. Password., the correct statusu2026
I´m very confused I don´t know what can I did wrong.
The type of the user is Dialog and the user that create all the external candidates user is the WF-BATCH my workflow useru2026 I think perhaps this is the reasonu2026 This is the correct user to create the external users?. Perhaps.. I set the assigned agent bad in any Workflowu2026?
Somebody could guide me, please?.
Best Regards,
EstherHi,
it seems you have a workflow in background sending out a smartforms based email after registration.
This smartforms seems to have a password generation mechanism, which overwrites the password of the user with a new initial one.
Please check that.
Best regards
Sebastian -
Incorrect status indication in OEM.
Hi,
Oracle Enterprise Manager 10g (OEM) seems to indicate incorrectly the status of the database instance/the agent connection in windows 2003. I was able to connect and manipulate oracle database using SQLPlus/SQL Developer, but the OEM kept indicate that the Database instance, and the agent connectivity are down. Has anyone noticed this, and has any explaination for it?
Thanks.EM has it's own configuration for the databases that it is monitoring - that is how it knows what to monitor and where the agents are. Did something change? I have seen this sort of behavior when I created a database with an underscore in its name (dbca doesn't seem to like this and removes the underscore). I then modified the database specific scripts to incoude the underscore in the name, but did not do the same for EM since those scripts were not saved when I saved the db creation scripts. I found by looking in the EM logs that it was trying to connect to the wrong dbname. Sorry, I don't have the names of the config files handy but you should have a sysman directory and then a directory for your instance name and then a config directory. The EM config files are a combination of xml and property files.
Maybe you are looking for
-
AP payment batch is running very slow
Dear All, We have an issue with AP payment batch, wherein the batch is unning very very slow. The DB is currently on 11gR2 with application on CU2. After having a close look into it we have seen an SQL ID dq3nnqyx0u7ht. Please help us if any patch is
-
Sharing an iTunes Library on one Mac?
I've one Mac on which Bob would like to use the iTunes Library of Alice with Alice agreement. Alice has already enabled the sharing on her account. But Bob doesn't see anything when looking for shared Libraries. How is this possible? dan
-
Trying to connect the scale parameter with a bouncing ball
hi, to all and thanks for reading this is my first post I'm looking for a way to link the scale parameter of a ball to achieve a bounce effect. Im trying to use the new link behavior -I used the replicator to replicate a ball then I add the edge coll
-
G/L Account not maintained.
hai, Can any one tell me how to handle the error G/L account not maintained when Sale order is rised in va01. with regards Anuradha
-
i am stuck at some of the points and have no clue to what i should do. Please, if you could find it out from someone already there they should know somthing. 1. What do you do with flag indicators and different code attributes in your entity tables.