Incorrect storage space?

Hi,
My 16gb iphone 5 keeps complaining about being short on storage space.
I've checked the usage and every app adds up to about 4GB 9the 2 biggest apps only have 2.1GB (Music) and the Camera only takes 1.1GB?????
Surely the iOS doesn't take up circa 11GB?

can you plug it into iTunes on a computer to sww how much space each category is taking up?
Here is an example of mine:

Similar Messages

  • Storage Spaces: SSD tier size incorrect when using EnclosureAware option in a pool

    Hi folks,
    We're about to deploy Storage Spaces in our test environment, but we encountered an issue while configuring Enclosure Awareness on Storage Pools.
    When we create a Storage Pool (over 3 JBOD's) and set the option EnclosureAwarenessDefault to $True, the SSD tier size automatically decreases / shrinks to 12GB (sometimes 18GB sometimes 0GB).
    Without EnclosureAwarenessDefault, we get 1110 GB of SSD size available.
    The same behavior is seen when enabling -EnclosureAwareness on Storage Space (virtual disk) level.
    A summary of our configuration:
    3 SOFS connected twice to each JBOD (LSI 9207-8e - SES 3 ) = HCL certified
    3 JBOD arrays (Quanta M4600H) (Firmware Management SCSI Enclosure Service (SES-2) = HCL certified
    Each JBOD array has 16 HDD and 4 SSD.
    SOFS are fully patched, including KB 2913766
    Below 2 screenshots:
    EnclosureAwareDefault = $True
    https://onedrive.live.com/redir?resid=BB5A32452CA3BD6C%21436
    EnclosureAwareDefault = $False
    https://onedrive.live.com/redir?resid=BB5A32452CA3BD6C%21437

    Hi Partner,
    Thank you for your detailed information and sorry for the delayed response.
    After consulting with some senior engineers, please check the following:
    Server manager does not let you set the column count of the space, which means that it is automatically selecting 6 as the column count, as there are 12 SSDs.  Unfortunately, the column count must be less than the number of disks of each type in each
    enclosure (limited by 4 SSDs), otherwise space creation will fail, and estimation will produce a small, somewhat random number.  If you create a space through powershell and specify –NumberOfColumns 4 then it should work.
    Hopefully it helps.
    Feel free to let me know if you have any question. Thank your for your time.
    Best Regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Incorrect percentage of storage space

    (MBP user) When I click my cloud icon at the top right, it indicates that I have used 26% (5.3 GB) of my allotted storage space on the server. However, there are no files present in my CC folder. Why is it showing I am using that much space when I have nothing in the folder?

    Do you have any files in your Archive?
    To the left of the sidebar on the right of the Files page you should see three view icons - Grid (the default), List and Archive.
    The Archive is like the Recycle Bin on Windows or the Trash on Mac OS X. Files in it still count against your storage space unless you Permanently Delete them.

  • Ipad Storage space, incorrectly using iCloud?

    I have an iPad mini and I keep getting notices about my storage being used up. When i go to settings and check the usage it shows 11.9GB are being used by my photos. I have less than 30 pics saved on the actual device and everything else on my iCloud. but in the settings I also show I have 5GB of 5GB available for storage space. I don't understand!! When I am on my device and in the pictures app I see the cloud that says "shared" beneath it. All my pictures are there. Is this not the cloud? When I select a picture and select "iCloud" it sends it to whichever album I have selected in the shared space. Is this not the iCloud? What am I doing wrong!?

    Any photos that you can see on your iPad are stored on your iPad, even if they are also stored in iCloud.  This is done to allow you to be able to access them when you are in locations where you can't connect to the internet.  In other words, adding the photos to a shared stream will not keep them from also being stored on your iPad.  This is likely change later this fall with the introduction of iOS 8 and iCloud Photo Library (see https://www.apple.com/icloud/preview/).

  • Storage Spaces UI missing disks when a controller reports the same UniqueID for all attached disks (e.g. Supermicro AOC-SASLP-MV8)

    Summary: The Storage Spaces UI has several problems when there are more than 21 physical disks available to Storage Spaces.
    I have 28 SATA disks connected over 6 controllers. 2 are used for an Intel motherboard RAID1 for OS (PhysicalDisk0), so that leaves 26 data disks for Storage Spaces. [The plan is to get to 36 data disks in due course by adding disks (this 36-bay chassis: http://www.supermicro.com/products/chassis/4U/847/SC847A-R1400LP.cfm)]
    Initially, there were 23 data disks (5x 1TB, 1x 640GB, 14x 500GB, 3x 250GB) as PhysicalDisk1-23 (in that order), which I put into a storage pool. I created a parity disk over all 23 disks. It looks like it is working fine, albeit very slowly on writes.
    I've now added 3 more 4TB disks, as PhysicalDisk24-26, and taken them offline, and have now noticed errors in the Storage Pools UI in the Server Manager. For example:
    * No more than 21 disks ever show up in the "Physical Disks" area in the lower right. When the 23 disks are connected, only the first 21 show up in the pool I created. With 26 disks connected, only the first 20 show up in the pool, and only 1 more of the
    new 3 (PhysicalDisk26) shows up in the Primordial group.
    * In the Properties of the parity Virtual Disk created over the 23 disks, the disks are shown incorrectly. Again, only 21 disks are shown, and PhysicalDisk26 is incorrectly shown as part of the virtual disk. See image:
    * Using the New Storage Pool Wizard, I cannot add more than 1 of the new 3 disks to a new Storage Pool (only PhysicalDisk26 is available). And the details incorrectly refer to PhysicalDisk21. See image (a WDC WD2500JD-22H is a 250GB disk, not a 4TB disk).
    Thus I cannot use the new disks in a new storage pool.
    According the blog post at http://blogs.msdn.com/b/b8/archive/2012/01/05/virtualizing-storage-for-scale-resiliency-and-efficiency.aspx:
    Q) What is the minimum number of disks I can use to create a pool? What is the maximum?
    You can create a pool with only one disk. However, such a pool cannot contain any resilient spaces (i.e. mirrored or parity spaces). It can only contain a simple space which does not provide resiliency to failures. We do test pools comprising multiple hundreds
    of disks – such as you might see in a datacenter. There is no architectural limit to the number of disks comprising a pool.
    However, the UI currently does not seem to correctly work with more than 21 physical disks. Please advise.
    Using Server 2012 RC.
    Hardware: Supermicro X8SAX (BIOS v2.0), Intel i7-920 2.67GHz, 6x 2GB DDR3-1333 (certified Crucial CT25664BA1339.16SFD)
    Disk controllers: 2x RAIDCore BC4852 (PCI-X, final 3.3.1 driver) (15 ports used), 2x Supermicro AOC-SASLP-MV8 (PCIe, 4.0.0.1200 Marvell driver to allow >2TB disks) (6 ports used), Sil 3114 (PCI, latest 1.5.20.3 driver) (1 port used), motherboard Intel
    in RAID mode (4 ports used for data, plus 2 for OS RAID1).

    An update. I added 16x SATA disks across 2x Supermicro AOC-SASLP-MV8. All 16 disks report the same UniqueID.
    I have 25 disks in the pool now (23 as parity; 2 as journal added via PowerShell). 10 of these are on the two AOC-SASLP-MV8 controllers. Only the first 16 disks show up in the UI, so 9 are missing from the UI - which is consistent with this UI bug where
    only one disk per UniqueID shows up. PowerShell does work to manage the SS.
    PS C:\Users\administrator.TROUNCE> Get-PhysicalDisk | format-list FriendlyName, UniqueId, ObjectId, BusType
    FriendlyName : PhysicalDisk6
    UniqueId     : 00280000004000004FB116493C169A1A
    ObjectId     : {7ab38e00-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk7
    UniqueId     : 00280000004000001AE48E5088028D0D
    ObjectId     : {7ab38e02-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk8
    UniqueId     : 002800000040000020C9A6680224E32F
    ObjectId     : {7ab38e04-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk9
    UniqueId     : 0028000000400000FDE73E7254A60C4C
    ObjectId     : {7ab38e06-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk23
    UniqueId     : 0050430000000000
    ObjectId     : {7ab38e08-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk22
    UniqueId     : 0050430000000000
    ObjectId     : {7ab38e0a-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk21
    UniqueId     : 0050430000000000
    ObjectId     : {7ab38e0c-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk20
    UniqueId     : 0050430000000000
    ObjectId     : {7ab38e0e-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk5
    UniqueId     : 0028000000400000272BA74A52309853
    ObjectId     : {7ab3900f-ab87-11e1-bbbd-002590520253}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk19
    UniqueId     : 0050430000000000
    ObjectId     : {7ab38e10-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk4
    UniqueId     : 00280000004000009DE164099941430A
    ObjectId     : {7ab39011-ab87-11e1-bbbd-002590520253}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk18
    UniqueId     : 0050430000000000
    ObjectId     : {7ab38e12-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk11
    UniqueId     : 0028000000400000967EB0559AB4E351
    ObjectId     : {7ab39013-ab87-11e1-bbbd-002590520253}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk17
    UniqueId     : 0050430000000000
    ObjectId     : {7ab38e14-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk24
    UniqueId     : 0050430000000000
    ObjectId     : {7ab38e16-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk10
    UniqueId     : 0028000000400000B22A722C8AD2557B
    ObjectId     : {df23f916-c19f-11e1-bbf5-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk16
    UniqueId     : 0028000000400000DA4D24536A847E52
    ObjectId     : {7ab38e19-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk15
    UniqueId     : 00280000004000005DEDFF007783A242
    ObjectId     : {7ab38e1b-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk14
    UniqueId     : 002800000040000018C9CF6EBE605911
    ObjectId     : {7ab38e1d-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk13
    UniqueId     : 0028000000400000B64436290D155A48
    ObjectId     : {7ab38e1f-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk0
    UniqueId     : IDE\DiskOS1.0.00__\4&180adc7b&0&0.0.0:Trounce-Server2
    ObjectId     : {df23f925-c19f-11e1-bbf5-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk31
    UniqueId     : 0050430000000000
    ObjectId     : {df241daf-c19f-11e1-bbf5-002590520253}
    BusType      : RAID
    FriendlyName : PhysicalDisk32
    UniqueId     : 0050430000000000
    ObjectId     : {df241db2-c19f-11e1-bbf5-002590520253}
    BusType      : RAID
    FriendlyName : PhysicalDisk27
    UniqueId     : 0050430000000000
    ObjectId     : {df241cbe-c19f-11e1-bbf5-002590520253}
    BusType      : RAID
    FriendlyName : PhysicalDisk28
    UniqueId     : 0050430000000000
    ObjectId     : {df241cc1-c19f-11e1-bbf5-002590520253}
    BusType      : RAID
    FriendlyName : PhysicalDisk34
    UniqueId     : 0050430000000000
    ObjectId     : {df241dc4-c19f-11e1-bbf5-002590520253}
    BusType      : RAID
    FriendlyName : PhysicalDisk29
    UniqueId     : 0050430000000000
    ObjectId     : {df241cca-c19f-11e1-bbf5-002590520253}
    BusType      : RAID
    FriendlyName : PhysicalDisk33
    UniqueId     : 0050430000000000
    ObjectId     : {df241dcf-c19f-11e1-bbf5-002590520253}
    BusType      : RAID
    FriendlyName : PhysicalDisk30
    UniqueId     : 0050430000000000
    ObjectId     : {df241cd3-c19f-11e1-bbf5-002590520253}
    BusType      : RAID
    FriendlyName : PhysicalDisk2
    UniqueId     : 002800000040000037638531D4A17419
    ObjectId     : {7ab38df8-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk3
    UniqueId     : 0028000000400000AB7400464090110C
    ObjectId     : {7ab38dfa-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel
    FriendlyName : PhysicalDisk1
    UniqueId     : IDE\DiskWDC_WD6400AAKS-00A7B2___________________01.03B01\4&180adc7b&0&0.1.0:Trounce-Server2
    ObjectId     : {7ab38dfc-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : RAID
    FriendlyName : PhysicalDisk12
    UniqueId     : 00280000004000005396CC47AA8AD97B
    ObjectId     : {7ab38dfe-ab87-11e1-bbbd-806e6f6e6963}
    BusType      : Fibre Channel

  • Macbook pro shows incorrect storage information on SSD.

    I am using a macbook pro. The storage information is shown wrongly. Control I shows the correct information but finder and space bar on the hard disk show incorrect storage information. Used space is actually 122 GB which is shown as 140 GB. Even omnidiskkeeper shows the breakup of 122 GB but the storage information summary shows 140GB.

       Re-index Macintosh HD.
       Spotlight reindexing will take a while to finish.
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409

  • 30gb video ipod showing incorrect storage capacity

    Hi,
    I have a 30gb ipod. When I connect the ipod & open itunes or ipod updater, the ipod appears with an incorrect storage capacity.
    The updater shows all other information correctly, except for Capacity, which shows at 65.0GB
    With nothing on the ipod, Itunes shows used: 4.49GB, free: 58.99GB. If I try to transfer any files I get a message saying that there is not enough free space to transfer the files.
    I have restored to factory settings, re-installing all software, changing usb ports etc but nothing seems to have helped...
    Any suggestions would be greatly appreciated!
    Thanks,
    Matt.
      Windows XP  

    How about this?
    http://docs.info.apple.com/article.html?artnum=93499

  • Storage Spaces - unmark hard drive as "retired" after SATA controller failure

    Hello,
    I am having a problem with Storage Spaces - it won't start recovering the mirror set.
    The mirror set got degraded because one of SATA ports on the controller went bad (I/O errors with any hard drive on that port).
    After the hard drive is reconnected to another port, Storage Spaces still shows the drive as 'Retired'.
    I can unmark the disk by running Set-PhysicalDisk -UniqueID id -Usage AutoSelect
    Then, I can access a Simple (non-mirrored) thin-provisioned virtual disk located on that physical disk, and there are no I/O errors in Event Log, or any other errors.
    But after I attempt to initiate Mirror set repair (Repair-VirtualDisk -FriendlyName mirror), the physical disk becomes 'Retired' again, although no I/O errors have occured.
    Seems that somewhere in the metadata there is incorrect information about actual disk health state, and I need a way to reset it.
    Thank you.

    Thank you for reply.
    Figured out a workaround which solved the problem, however, it is somewhat crude (use at your own risk!):
    1. If there are any non-redundant (simple) virtual disks in the storage pool, back up the data somewhere (they have to be deleted and recreated from scratch)
    2. Disable the spaceport driver (sc config spaceport start= disabled), so you can see the hidden GPT partitions of type 'e75caf8f-f680-4cee-afa3-b001e56efc2d'.
    3. Reboot.
    4. Wipe the affected physical hard disk using diskpart (use
    clean command)
    5. Enable the spaceport driver (sc config spaceport start= boot) and reboot
    6. Now you can add the affected hard disk yet again
    7. At this point - the affected hard disk is listed twice - one in the 'Retired' state, the other is 'Healthy'.
    8. Initiate the repair of the affected mirror virtual disks, and wait for completion
    9. Now you can delete the 'Retired' disk.
    All that said, it would be great to have an option to un-retire a hard disk in place, without going through all that hassle.
    Set-PhysicalDisk -UniqueID id -Usage AutoSelect does not really work (the disk becomes Retired again when starting repair).
    Remove-PhysicalDisk also fails with 'Not supported' error (unless you do the above workaround).
    Thank you.

  • Incorrect storage info

    When I navigate to about this Mac and then to storage info, it reports a completely wrong size for photos, audio,  and movies. It reports as having 82 gigs of photos, 16 gigs of audio, 13 gigs of movies and 11 gigs of apps. Yet my hard drive capacity is 120 gigs. Other applications correctly report that I have 79 gigs free space.
    I have reformatted my computer and started using command + R and disk utility to erase hard drive and reinstall OS X.
    I DID NOT install or MIGRATE my applications and installed OS X as completely new.
    I have used omnidisksweeper.
    I have reindexed my hard drive using terminal commands AND also using this support page method: Spotlight: How to re-index folders or volumes
    I have used disk utility to repair hard drive. Any other suggestions?
    I have an attachment of the incorrect storage being reported if needed.

    It appears you're running the Yosemite Public Beta. You really need to provide Apple with Feedback (Problem Report).

  • Storage spaces + Hyper-V with multiple 1GBe nics for storage?

    Hi guys!
    So I just got my private cloud hardware. I actually put in the order before summer, but due to firmware and certification issues on my desired SuperMicro JBODs delivery was seriously delayed. So much that I've completely forgotten my networking ideas. I
    need help/verification. Or at least a URL - most described setups are 10 GBe nowadays... Or even a "not gonna work"  :-)
    My setup is supposed to be a 3 JBOD, 2 head node storage spaces/sfos cluster providing storage to a 4 node Hyper-V cluster. I didn't have a budget for a 10 GBe setup, but got a great price on a lot of 1 GBe nics. After allocating management, Hyper-V, etc
    I have 3x 1 GBe ports left on all Hyper-V and Storage servers. 
    I think my original plan was to create three subnets and add one nic from each server. And then I guess I've imagined some kind of SMB3 magic discovering these paths between Hyper-V and storage and just aggregating bandwitdh and providing fault tolerance
    by sprinkling fairy dust. Must have been the heat...
    So now I'm "replanning" and I realize that I'm going to create a failover cluster at the storage level providing a cluster name and IP. I'm thinking the management subnet where domain info resides is appropriate, but then what about the other three
    subnets? I don't want to flood my management subnet with storage traffic, but do want bandwidth and resilience. Did I make a design error, and how do I make the best of the situation?
    Disclaimer: My previous experience on virtualization clusters is ISCSI SAN and 2008 R2 Hyper-V clusters. Storage Spaces is completely new to me :-)
    And due to overlapping technologies I struggled a bit on placing this thread. Hope I got it right

    Hello,
    i did not understand how many NICs you have in each Host. Hyper-V Cluster with 1 GBe NICs work as long as you know that it is not 10 GBe.
    In this article is the complete Hyper-V Cluster design in checklist form. I think you should work with this list for some further ideas:
    http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
    Sorry that i cant give a better answer, but i lack information about about your environment.
    Regards,
    Thomas
    Thomas Hanrath [MCT | Regional Lead Germany] |
    http://www.hanrath.de
    Microsoft Learning Blog |
    http://blog.microsoftlearning.de
    MCSE | Private Cloud

  • I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

    I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

    You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
    Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

  • TS3694 MY IPhone will not let me back up or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?

    MY IPhone will not let me back up my phone or download the IOS 7 update because it says i do not have enough storage space. But I deleted all of my apps and pictures just to update it and it still wont let me do it. What should I do?

    Contact iTunes to re-enable your account at expresslane.apple.com
    You can reach them by chat or email.

  • Memory Dump :FBL5N No roll storage space of length 1753104 available for internal storage.

    Dear Friends,
               I am getting below error during T-Code FBL3N Report. No roll storage space of length 1753104 available for internal storage.
    Our Server' RAM size is 24 GB,and existing parameters are as below
    ztta/roll_area: 6500000
    ztta/roll_extension:2000683008
    abap/heap_area_total:2000683008
    abap/heap_area_dia: 5000000000
    abap/heap_area_nondia: 2000683008
    em/initial_size_MB: 4092
    Please suggest Parameter to be change.
    Details Dump log ST22
    Runtime Errors         TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
    Date and Time          04.03.2014 10:18:48
    |Short Text                                                                                        |
    |    No roll storage space of length 1753104 available for internal storage.                       |
    |What happened?                                                                                    |
    |    Each transaction requires some main memory space to process                                   |
    |    application data. If the operating system cannot provide any more                             |
    |    space, the transaction is terminated.                                                         |
    |What can you do?                                                                                  |
    |                                                                                                  |
    |    Try to find out (e.g. by targetted data selection) whether the                                |
    |    transaction will run with less main memory.                                                   |
    |                                                                                                  |
    |    If there is a temporary bottleneck, execute the transaction again.                            |
    |    -                                                                                             |
    |                                                                                                  |
    |    If the error persists, ask your system administrator to check the                             |
    |    following profile parameters:                                                                 |
    |                                                                                                  |
    |    o  ztta/roll_area            (1.000.000 - 15.000.000)                                         |
    |           Classic roll area per user and internal mode                                           |
    |           usual amount of roll area per user and internal mode                                   |
    |    o  ztta/roll_extension       (10.000.000 - 500.000.000)                                       |
    |           Amount of memory per user in extended memory (EM)                                      |
    |    o  abap/heap_area_total      (100.000.000 - 1.500.000.000)                                    |
    |           Amount of memory (malloc) for all users of an application                              |
    |           server. If several background processes are running on                                 |
    |           one server, temporary bottlenecks may occur.                                           |
    |           Of course, the amount of memory (in bytes) must also be                                |
    |           available on the machine (main memory or file system swap).                            |
    |           Caution:                                                                               |
    |           The operating system must be set up so that there is also                              |
    |           enough memory for each process. Usually, the maximum address                           |
    |           space is too small.                                                                    |
    |           Ask your hardware manufacturer or your competence center                               |
    |           about this.                                                                            |
    |           In this case, consult your hardware vendor                                             |
    |    abap/heap_area_dia:        (10.000.000 - 1.000.000.000)                                       |
    |           Restriction of memory allocated to the heap with malloc                                |
    |           for each dialog process.                                                               |
    |    Parameters for background processes:                                                          |
    |    abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)                                    |
    |           Restriction of memory allocated to the heap with malloc                                |
    |           for each background process.                                                           |
    |    Other memory-relevant parameters are:                                                         |
    |    em/initial_size_MB:         (35-1200)                                                         |
    |           Extended memory area from which all users of an                                        |
    |           application server can satisfy their memory requirement.                               |
    |    Note which actions and input led to the error.                                                |
    |                                                                                                  |
    |    For further help in handling the problem, contact your SAP administrator                      |
    |    .                                                                                             |
    |                                                                                                  |
    |    You can use the ABAP dump analysis transaction ST22 to view and manage                        |
    |    termination messages, in particular for long term reference.                                  |
    |                                                                                                  |
    |Error analysis                                                                                    |
    |    The internal table "\CLASS=ZCL_IM__GTA_TAX_CODE\METHOD=IF_EX_FI_ITEMS_CH_DATA~C               |
    |    HANGE_ITEMS\DATA=GT_BSIK" could not be enlarged further.                                      |
    |                                                                                                  |
    |    Memory location: "Session memory"                                                             |
    |                                                                                                  |
    |    You attempted to extend the data structure for the management of the                          |
    |    memory blocks for table "\CLASS=ZCL_IM__GTA_TAX_CODE\METHOD=IF_EX_FI_ITEMS_CH_D               |
    |    ATA~CHANGE_ITEMS\DATA=GT_BSIK". However, the 1753104 bytes required for                       |
    |    this were no longer available in the specified memory area.                                   |
    |                                                                                                  |
    |    The amount of memory requested is no longer available.                                        |
    |How to correct the error                                                                          |
    |                                                                                                  |
    |    Try to decide by analysis whether this request is                                             |
    |    reasonable or whether there is a program error. You should pay                                |
    |    particular attention to the internal table entries listed below.                              |
    |                                                                                                  |
    |                                                                                                  |
    |                                                                                                  |
    |                                                                                                  |
    |                                                                                                  |
    |                                                                                                  |
    |    If the error occures in a non-modified SAP program, you may be able to                        |
    |    find an interim solution in an SAP Note.                                                      |
    |    If you have access to SAP Notes, carry out a search with the following                        |
    |    keywords:                                                                                     |
    |                                                                                                  |
    |    "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY" " "                                                          |
    |    "ZCL_IM__GTA_TAX_CODE==========CP" or "ZCL_IM__GTA_TAX_CODE==========CM001"                   |
    |    "IF_EX_FI_ITEMS_CH_DATA~CHANGE_ITEMS"                                                         |
    |                                                                                                  |
    |    If you cannot solve the problem yourself and want to send an error                            |
    |    notification to SAP, include the following information:                                       |
    |                                                                                                  |
    |    1. The description of the current problem (short dump)                                        |
    |                                                                                                  |
    |       To save the description, choose "System->List->Save->Local File                            |
    |    (Unconverted)".                                                                               |
    |                                                                                                  |
    |    2. Corresponding system log                                                                   |
    |                                                                                                  |
    |       Display the system log by calling transaction SM21.                                        |
    |       Restrict the time interval to 10 minutes before and five minutes                           |
    |    after the short dump. Then choose "System->List->Save->Local File                             |
    |    (Unconverted)".                                                                               |
    |                                                                                                  |
    |    3. If the problem occurs in a problem of your own or a modified SAP                           |
    |    program: The source code of the program                                                       |
    |       In the editor, choose "Utilities->More                                                     |
    |    Utilities->Upload/Download->Download".                                                        |
    |                                                                                                  |
    |    4. Details about the conditions under which the error occurred or which                       |
    |    actions and input led to the error.                                                           |
    |                                                                                                  |
    |System environment                                                                                |
    |    SAP-Release 700                                                                               |
    |                                                                                                  |
    |    Application server... "NEWPRD1"                                                              |
    |    Network address...... "10.0.0.1"                                                              |
    |    Operating system..... "Windows NT"                                                            |
    |    Release.............. "6.0"                                                                   |
    |    Hardware type........ "16x AMD64 Level"                                                       |
    |    Character length.... 16 Bits                                                                  |
    |    Pointer length....... 64 Bits                                                                 |
    |    Work process number.. 19                                                                      |
    |    Shortdump setting.... "full"                                                                  |
    |                                                                                                  |
    |    Database server... "NEWPRD1"                                                                 |
    |    Database type..... "ORACLE"                                                                   |
    |    Database name..... "PRD"                                                                      |
    |    Database user ID.. "SAPSR3"                                                                   |
    |                                                                                                  |
    |    Terminal................. " "                                                                 |
    |                                                                                                  |
    |    Char.set.... "C"                                                                              |
    |                                                                                                  |
    |    SAP kernel....... 700                                                                         |
    |    created (date)... "Sep 17 2012 22:56:00"                                                      |
    |    create on........ "NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00"                              |
    |    Database version. "OCI_10201_SHARE (10.2.0.4.0) "                                             |
    |                                                                                                  |
    |    Patch level. 353                                                                              |
    |    Patch text.. " "                                                                              |
    |                                                                                                  |
    |    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"               |
    |    SAP database version. 700                                                                     |
    |    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows                |
    |     NT 6.0, Windows NT 6.1, Windows NT 6.2"                                                      |
    |                                                                                                  |
    |    Memory consumption                                                                            |
    |    Roll.... 16192                                                                                |
    |    EM...... 1826770240                                                                           |
    |    Heap.... 0                                                                                    |
    |    Page.... 40960                                                                                |
    |    MM Used. 1815573536                                                                           |
    |    MM Free. 2717408                                                                              |
    |User and Transaction                                                                              |
    |                                                                                                  |
    |    Client.............. 500                                                                      |
    |    User................ 1651                                                                     |
    |    Language key........ "E"                                                                      |
    |    Transaction......... " "                                                                      |
    |    Transactions ID..... "ED4EA3E3AB0AF11DA318E61F131BC713"                                       |
    |                                                                                                  |
    |    Program............. "ZCL_IM__GTA_TAX_CODE==========CP"                                       |
    |    Screen.............. "SAPMSSY0 1000"                                                          |
    |    Screen line......... 6                                                                        |
    |Information on where terminated                                                                   |
    |    Termination occurred in the ABAP program "ZCL_IM__GTA_TAX_CODE==========CP" -                 |
    |     in "IF_EX_FI_ITEMS_CH_DATA~CHANGE_ITEMS".                                                    |
    |    The main program was "RFITEMGL ".                                                             |
    |                                                                                                  |
    |    In the source code you have the termination point in line 64                                  |
    |    of the (Include) program "ZCL_IM__GTA_TAX_CODE==========CM001".                               |
    |    The program "ZCL_IM__GTA_TAX_CODE==========CP" was started as a background job.               |
    |    Job Name....... "RFITEMGL"                                                                    |
    |    Job Initiator.. "BASIS"                                                                       |
    |    Job Number..... 09115400                                                                      |
    |Source Code Extract                                                                               |
    |Line |SourceCde                                                                                   |
    |   34|          MANDT TYPE BSEG-MANDT,                                                            |
    |   35|          BUKRS TYPE BSEG-BUKRS,                                                            |
    |   36|          BELNR TYPE BSEG-BELNR,                                                            |
    |   37|          GJAHR TYPE BSEG-GJAHR,                                                            |
    |   38|          BUZEI TYPE BSEG-BUZEI,                                                            |
    |   39|          QSSKZ TYPE BSEG-QSSKZ,                                                            |
    |   40|          KTOSL TYPE BSEG-KTOSL,                                                            |
    |   41|          HKONT TYPE BSEG-HKONT,                                                            |
    |   42|         END OF TY_BSEG,                                                                    |
    |   43|                                                                                            |
    |   44|         BEGIN OF TY_FINAL,                                                                 |
    |   45|           BUKRS TYPE BSEG-BUKRS,                                                           |
    |   46|           BELNR TYPE BSEG-BELNR,                                                           |
    |   47|           GJAHR TYPE BSEG-GJAHR,                                                           |
    |   48|         END OF TY_FINAL.                                                                   |
    |   49|                                                                                            |
    |   50|  DATA: CW_ITEMS TYPE RFPOSXEXT,                                                            |
    |   51|        GT_BSIK TYPE STANDARD TABLE OF TY_BSIK,                                             |
    |   52|        GW_BSIK TYPE TY_BSIK,                                                               |
    |   53|        GT_BSAK TYPE STANDARD TABLE OF TY_BSAK,                                             |
    |   54|        GW_BSAK TYPE TY_BSAK,                                                               |
    |   55|        GT_BSEG TYPE STANDARD TABLE OF TY_BSEG,                                             |
    |   56|        GW_BSEG TYPE TY_BSEG,                              &nb

    sap basis wrote:
    |Information on where terminated                                                                   |
    |    Termination occurred in the ABAP program "ZCL_IM__GTA_TAX_CODE==========CP" -                 |
    |     in "IF_EX_FI_ITEMS_CH_DATA~CHANGE_ITEMS".                                                    |
    |    The main program was "RFITEMGL ".                                                             |
    |                                                                                                  |
    |    In the source code you have the termination point in line 64                                  |
    |    of the (Include) program "ZCL_IM__GTA_TAX_CODE==========CM001".                               |
    |    The program "ZCL_IM__GTA_TAX_CODE==========CP" was started as a background job.               |
    |    Job Name....... "RFITEMGL"                                                                    |
    |    Job Initiator.. "BASIS"                                                                       |
    |    Job Number..... 09115400                                                                      |
    First of all try to optimize code.

  • After upgrading to 8.1 Pro from 8.0 Pro, my Storage Spaces and Storage Pool are all gone.

    Under 8.0 I had three 4-terabyte drives set up as a Storage Pool in Storage Spaces.  I had five storage-space drives using this pool  I had
    been using them for months with no problems.  After upgrading to 8.1 ( which gave no errors ) the drives no longer exist.  Going into "Storage Spaces" in the control panel, I do not see my existing storage pool or storage drives. I'm prompted
    to create a new Pool and Storage Spaces.  If I click the "Create Pool" it does not list the three drives I used previously as available to add.
    Device Manager shows all three drives as present and OK.  
    Disk Management shows Disks 0,1,2,6.  The gap in between 2 and 6 is where the 3,4,5 storage spaces drives were.  
    Nothing helpful in the event log or the services.
    I've downloaded the ReclaiMe Storage Spaces recovery tool and it sees all of my logical drives with a "good" prognosis for recovery.  I've not gone down that road yet though because it requires separate physical drives to copy everything to
    and they want $299 for the privilege.
    Does anyone have any ideas?  I'm thinking of doing a fresh 8.1 install to another drive to see if it can see it or reinstalling 8.1 to the existing drive in the hope that it will just suddenly work.  Or possibly going back to 8.0.
    Thanks for your help!
    Steve

    Hi,
    “For parity spaces you must backup your data and delete the parity spaces. At this point, you may upgrade or perform a clean install of Windows 8. After the upgrade or clean installation is complete, you may recreate parity spaces and
    restore your data.”
    I’d like to share the following article with you for reference:
    Storage Spaces Frequently Asked Questions
    (Pay attention to this part:How do I prepare Storage Spaces for upgrading from the Windows 8 Consumer Preview to Windows 8 Release Preview?)
    http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#How_do_I_prepare_Storage_Spaces_for_upgrading_from_the_Windows_8_Consumer_Preview_to_Windows_8_Release_Preview
    Regards,
    Yolanda
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • After upgrading to IOS 5 my storage space in "other" is using 4.1GB of space..

    After I updated to IOS 5, my storage space lost a huge amount of space.. The "Other" category is showing 4.1GB and I don't even see what it is that is using that space..

    "Other" is for things that don't match the remaining categories defined by Apple.  Quite often, a large "other" is the result of an app orphaning data on your phone.  The app no longer cares about the data, but the phone says it wasn't properly deleted, so the phone keeps it around.  It is possible that you also have a third party map program that has stored a large amount of map data as "other" for off-line usage.
    In most cases, you can only recover this space by epfroming a factory restore, then re-installing your apps and data manually.  My 2.5 year old iPod Touch has about 450MB of "other" and my iPhone 4 has about 580MB.  I keep an eye on them and as long as it isn't causing me problems, I tend to not worry too much.

Maybe you are looking for