Incorrect Warranty date

I have 2 systems that were purchased in Feb. 2013. One has died. HP shows warranty expired in Aug. 2013. How do I get the date corrected I have been working on this for 2 weeks, and now am almost out of actual warranty.

@lobrien
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
Cheers,
KarolB
I work for HP

Similar Messages

Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

Hi All,
I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
Thanks,
Sudha

Hi,
Are you saying first create notification,then service order
and then Sales order.
But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
Thanks & regards,
chetan.

Process in restarting a FRP-run: how to prevent incorrect analytics data

Hi,
Today we encountered an issue where stock-data where not transfered to F&R. As a result OrderProposals generated during FRP-run were based on incorrect stock stock-values. As a result also the OrderProposals resulting from the FRP-run were considered incorrect and have been deleted by the business.
After stocks were processed correctly to F&R, a new FRP-run was done for the first 4 sequences in /FRE/FRP_MID_BASIC. (Note that we have these first 4 steps executed in the time critical window, and the Analytics step as a separate job directly afterwards).
Result is ofcourse new, correct, OrderPropsals but also a second run of the Analytics step on the same planning-day. As a result, in table /FRE/ANA_WEEKLY the STOCK_COUNTER is increased 2 times during one planning-day, which will cause incorrect data at the end of the week regarding average weekly-stock level.
It appears, every time the Analytics-step in /FRE/FRP_MID_BASIC is executed on a day, the STOCK_COUNTER field is updated. (this can be reproduced). The result will be incorrect Analytics data if that happens, but on the other hand: not executing the Analytics step a second time during the planning-day will also result in incorrect Analytics data as in that case it would in my situation have contained the stock-data from yesterday(as the initial issue was that current actual stock-data was not sent to F&R)
Is this a bug in F&R, or am I missing something? If there is a guide on what steps to execute under what conditions if FRP-run has to be executed again, or how to correct any (incorrect)Analytics data built up during previous runs?

a reply/answer would be appreciated....

I am having problems importing my Iphoto pics into new Photo programme. I am inporting approx 11,000 pics that all seem fine in Iphoto but the iport rejects around 7,000 of them with incorrect mete data. What can I do to import these?

I am having problems importing my I photo pics into new Photo programme. I am importing approx 11,000 pics that all seem fine in I photo but the import rejects around 7,000 of them with incorrect mete data. What can I do to import these?

I have the same problem.
Thread here: Import fails - "Unable to get metadata"

Actions- Incorrect Entry Date and Corrected Entry Date

i am going by the link below
http://help.sap.com/saphelp_erp60_sp/helpdata/en/48/35c5a94abf11d18a0f0000e816ae6e/frameset.htm
But I am not able to find "Incorrect Entry Date" and "Corrected Entry Date" Actions anywhere. Not even the drop down of Actions List
Where are they acually?

As said by our Gurus PA41 is used to change the Corrected entry and incorect entry
u can do the same thru PA40 if u select 70 and 71 action types this screens are nothing bu the screens u see in PA41
for ur info

Warranty date for materials ( Spare parts)

My client procures spares for the plant. few spares have warranty periods. i want to enter the warranty dates. and later warranty period is to be searched for the perticular material.
Pls help me where i can enter the warranty details
Krishna

Hi Friend,
1.In the material master plantdata2 tab maintain the serial no profile(MM01)
2.Go to Txcode iq01 create the serial no,there u have to maintain the warranty periods.
3.go to txcode bgm1 u have to create the master warrany.
4.goto txcode ik11 for claim the warranty.
I think these steps are usefull for u.
Thank's
MVS
Edited by: prasad medarametla on Sep 1, 2008 4:52 PM

PROCESS CHAIN error "Incorrect start date"

hi sap gurus,
I have parent chain in that a newly created meta chain is creating problem.I am getting error in the process chains since two days i am not able to solve this.Can anybody try to help me.
error: Incorrect start date: 00.00.0000; Start time 00:00:00 RSM 847
After that the process chain is turning red,but when i manually execute the process chain its running properly.
Please help me its urgent.

hi gurus,
Its working fine now.
Solution:
first exchange the variant with the smae and then activate and run.After that it will work in the process chain.
Thanks a lot to every body,especially MOHAN KRISHNA,

FP70- Reporting of Incorrect Bank Data

Hi
Under SAP ISU FICA, transaction FP70 can be used to process the ADDACS file received from banks in UK.
However SAP does not allow creation of manual lot in FP70.
Can someone recommend how can we create a incorrect bank data lot and test the configuration of activies against each return reason?
Regards
Sameer

Experience Required : 3+ yrs
Location : Kolkata ( Candidate anywhere from India who is willing to relocate to Kolkata can APPLY)
Required Skills
Previous experience of working on FI-CA project is mandatory. SAP Development skills including strong interfaces skills, working experience with BAPIs, RFCs, IDOCs, working experience in Print Workbench
If your profile matches to our requirement pls revert me back with your updated resume / u can reach me on below mentioned number else u can forward this mail to the collegues or friends who is looking for a change in job........
Regards,
Sushma A
Melstar Information Technologies Ltd
A CMM Level III and ISO Certified Company
Bangalore
Tel : 080 2522 5737 Ext: 115
mbl: 9019686842

Search results showing incorrect modified date

Hi All,
I have a one difficulty in search results.
Document showing incorrect modified date in search results. And this happens for one document only.
We have customized the search/results.aspx page, Our document is showing correct modified date in document properties,All Items.aspx like 31/4/2013.
But when i search with document name in search, result showing incorrect modified date like 24/6/2004.
I checked with database in SQL, every thing is fine.
I have updated the Modified date through powershell script for one document and after that this recent modified date is showing in search results.
But after updating the Modified date through powershell, issued document not showing the recent modified date in search results. still showing as 24/6/2004.
I should not do edit property and save, to create new version.
I don't know what is happening in search crawl. All ready full crawl running daily basis.
I want to check whether this issued document is crawling or not. Could anybody help me to get out of this. what is the main cause of this issue.
Thanks & Regards
MD.Liakath ali

Hi,
I'm seeing the same issue after upgrading the SharePoint 2010 to SharePoint 2013.
When I search any upgraded document in SharePoint 2013, the document's "Last Modified Date" was showing an incorrect value in Search Results page but other metadata of document like "Last Modified User" is showing the correct
value so the problem is not with document crawl, something wrong with Last Modified Date property in Search results.
I have seen below comment as answer but I didn't understand the solution to fix this issue for all upgraded documents.
The most likely cause is that there is metadata on the documents that is set to that date which is overriding the other dates in the search result. SharePoint isn't particulary imaginative so it's got to be finding that date from somewhere.
Do we have any solution for this issue? Is this issue will be addressed in SharePoint 2013 SP1?
Note: No issues with documents, which uploaded after upgrade.

Incorrect Document Date in a Posted AP Invoice

We have an AP invoice that was posted with an incorrect Document Date. - 12/20/1011. The date is causing problems with exporting the results of an SQ01 Query Results to MS Excel. I have been told by SAP Support that the date canot be changed because "The reason behind this system design is to protect criticalaccounting document data and to avoid fiscal period close problems, e.g., audit control, out of balance situations" . Here are my Questions:
1) Why would the application alllow a document year of 1011 to be posted?
2) How does the document date impact the fiscal period close?
3) How can the date be changed? Reversing the document doesn't resolve the problem.
4) How do I prevent this from happening again?
Thank you for your replies.

Hi Mari,
Thanks for the reply.
I can understand the resason for not being able to change the Posting Date. But what are the reasons for not being able to change the Document Date? What is the fiscal reason for not being able to change the Document Date? Please provide an example. Reversing the document doesn't work in this case as the SQ01 report would still include the incorrect date.
Regards,
Gary

Incorrect GL Date in Invoice Distributions

Hi,
A client has an issue where the GL Date in the Invoice Distributions screen (28-Feb-13) isn't lining up with the GL Date entered in the Invoice Header and Lines screens (01-Mar-13). Because of this, GL reporting shows the expense in the FEB-13 Period, when it should be in the MAR-13 period. I'm thinking the incorrect GL Date in the Invoice Distributions screen is a user error in entering data, but is there any other way this could have happened (Setup)?
Any help would be greatly appreciated.
Thanks,
Chris

Hi Chris
Ideally whatever GLdate you enter @ INvoice header gets populated @ Invoice line level, however user can change/modify during entering details@ Invoice line level
Have you tried creating one Inovice in a test Instance where the dates are mismatching from Header and at Line level , if not can you try once creating a manual AP Invoice
Thanks
Krishna

Warranty Date field in the equipment master data

Hi everyone!
I wanted to display the warranty date field in the equipment master data (IE01). I have already made the configuration and added the additional tab and screen thru this path:
Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > General Data > Set View Profile for Technical Objects
But still, the tab is not added and the warranty date field is not found in the "Define Field Selection for the Equipment Master Record". please help me with this. We need this data because we are not using serial numbering and warranty master data that's why a way to track the warranty date is thru this adjustment in the equipment master data screen.
Thank you very much.

Marlon,
Make sure that you have assigned this specific profile to the Equipment category of the associated equipment that you are creating under SPRO > PM> Master data> tech object > Equipment > Equip category.
Regards
Narasimhan

Asset incorrect capitalization date

An asset is created with an incorrect capitalization date with date feb 2007. now they found out the cap date should be 12/01/2007, so the asset is posted with addl depreciation for 10 months . how to credit depreciation
What is the ideal way to correct it.
Fyi..2007 is already closed.
Any clarification is appreciated.
Thank you

Thanks for your response..I realize I just have to write up depreciation using ABZU, but do I need to make any changes to the asset master to the depreciation start date
Also when I use ABZU/ ttype 700 to writeup does it recalculate depreciation.
Thank you

To get the warranty date

hai guys,
               i have a field called mfg date in the format dd/mm/yyyy.from this i have to get warranty date.
the formulae is warranty date = mfg date + 18months + 10days.
can anybody provide me the logic for this.

Hi Mahesh,
Check this:
DATA:
w_date      LIKE p0001-begda,
w_days      LIKE t5a4a-dlydy,
w_months    LIKE t5a4a-dlymo,
w_years     LIKE t5a4a-dlyyr,
w_calc_date LIKE p0001-begda.
DATA:
BEGIN OF w_temp,
    w_mfg LIKE sy-datum,
END OF w_temp,
it_temp LIKE TABLE OF w_temp.
w_temp-w_mfg   = '20080102'.             " here mfg date hardcode
APPEND w_temp TO it_temp.
w_days   = '10'.
w_months = '18'.
LOOP AT it_temp INTO w_temp.
w_date = w_temp-w_mfg.
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
    EXPORTING
      date      = w_date           " mfg date
      days      = w_days                 " 10 days
      months    = w_months               " 18 month
      signum    = '+'
      years     = w_years
    IMPORTING
      calc_date = w_calc_date.
WRITE: w_calc_date.
ENDLOOP.
The value for mfg date i have hardcoded and moved into internal table .
Regards
Adil

Oracle contracts generating incorrect start dates/pricing

Hi,
Oracle contracts generating incorrect start dates/pricing
Semi Annual Invoices being automatically generated with the incorrect start date/pricing.
We have 8 years of pricing instead of 6 yrs. Contracts are being terminated and recreated to correct immediate billing issues.
Please help me out Why Oracle contracts generating incorrect start dates/pricing.
Thanks In Advance,

Which Apps release is this happening in?

Incorrect Warranty date

Similar Messages

Maybe you are looking for