Increase disk space allotted to Windows

I have a Mac Mini with following config: Mac OS X 10.5.8; 120 GB HD, 2GHz Intel Core 2 Duo, 1GB 667MHz DDR2 SD RAM. I have installed a licensed version of Windows XP SP2 and allotted it 10GB of space. Now I find the space woefully inadequate.
_How can I increase the disk space allotted to Windows without having to reinstall Windows?_ For a re-installation would mean downloading all the updates from SP3 till date all over again, also the drivers etc.
P.S. I need Win XP on the Mini for my children. They are taught Win XP at school.

Amit Mac wrote:
Will try the same. But is there any 'free' software to do the same job reliably.
Sorry to say but no.
The only 'free' alternative would be a complete re-installation of BootCamp Windows with an increased partition size.
Stefan

Similar Messages

  • How do I increase ipad disk space allotted to the downloads of a particular app like Comics?

    How do I increase ipad disk space allotted to the downloads of a particular app like Comics?

    Support discussion for iPad
    iPad
    http://www.apple.com/support/ipad

  • Disk space for a Windows 8 Boot Camp partition?

    Hi,
    Hope your are all doing good
    Could you could please help me with how much hard disk space do i need for windows 8 bootcamp
    Current  Os ( Mountan lion) 
    Applications intended to be used Win 7/ Win 8
    Office 2013 & office 2007 ( Only Word , Power point and Excel )
    no files will be saved on the ssd in either mac or windows
    Hard Drive docking station  : 1 TB +  ( For storage ( Videos etc )
    ***** If i am unable to install win 8 (ssd) and use a clone from my old hdd of win 7 is it ok or should i compulsory do a fresh install
    System Specifications
    Macbook PRO Late 2011 (15 inch md318ll/a )
    Processor : I7 2.2GHz
    Ram : 8gb (crucial)
    hard drive : 256 gb (Samsung Evo SSD)

    Do a fresh install. 60GB minimum is my recommendation. If you want to save data on the drive then 100GB would be better.

  • Increase disk space for Oracle Linux VM

    Hi
    I am using the "Pre-built Virtual Machine for SOA Suite and BPM Suite 11g". The total available space at / is 654.62 MB.
    Now how do I increase the disk space at /.
    Thanks
    BK

    According to http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html this is a Virtualbox disk image and your question is about resizing a Virtualbox disk image, which is probably better placed in the VM forum e.g. Virtual Desktop Infrastructure and SunRay Clients
    To my knowledge there is no easy command to simply resize a disk image using the VirtualBox Virtual Disk Manager and you will have to either add another disk and play with Linux LVM, or clone the existing disk image to a larger disk image. i.e. VBoxManage clonehd --existing oldhd.vdi newhd.vdi
    Both steps are not easy to explain. I suggest to check the VirtualBox documentation at http://www.virtualbox.org/manual/UserManual.html or search the internet for information about how to resize a vdi disk image.

  • Oracle 10g increase disk space

    Hi all,
    I am very new with oracle and can not find an answer to this question:
    Is it possible to increase the disk space after installation, e.g. by configuring of an additional disk?
    (If yes, in what way)
    The scenario is:
    After some time after our Oracle installation the disk wiil be full and we wiil need to increase the disk space without to lose the existing data.
    Many thanks in advance!
    Pita

    Hi,
    first of all - thanks a lot for your help and new questions :)
    -- You can add a datafile to the existing tablespace keeping the new datafile to the location where there is enough space.
    What is about the old datafile (old data), can I keep two data files assingded to the single tablespace?
    -- 1)You can use 3rd party tools like Acronis Disk Director Suite to increase the drive space without formatting
    2)You can have new drive and you can move your datafiles to that new drive.
    I don't want to copy the existing data to the new drive.
    Is it possible to configure an additional drive for the same tablespace
    Best regards,
    Pita

  • HT4818 How do I increase my space on the Windows partition side of my Mac?

    Help!  I have installed a Windows partition using Bootcamp.  I need to increase the amount of space for The Windows portion.  Right now it's 20GB.  After I've installed QB 2012 and Norton Anti Virus I am out of room!

    Welcome to Apple Support Communities
    You have to uninstall Windows. In Lion, open Boot Camp Assistant, delete the volume and create that again. Finally, install Windows

  • Not enough disk space on a Windows-formatted External Drive?

    I keep getting 'not enough disk space' message in Tiger when trying to back up my data to an external HD, formatted for windows (I share it with Bootcamp-based windows partition).
    Now, the disk is 100 GIG and I'm only trying to back up 10 GIG. The disk is almost empty, and the disk's trashcan is empty.
    I had same issues with a flashdisk at my father's. It was 2 GIG, and I was copying 500 megs of pictures. OSX kept telling me the disk didn't have enough space! Embarrassed, I had to copy photos in batches of 20. Of course, my Mac was ridiculed thoroughly.
    I appreciate any help!

    Hello,
    Your problems may very well be related to the NTFS file system used by Windows.
    The Mac OS has very limited support for NTFS partitions. It cannot write them at all. And, it only supports reading to a limited extent.
    If you want to be able to read and write Windows formated partitions, you should be using the FAT32 format for your Windows drives. The Mac OS can read and write FAT32 drives without any trouble.
    But, there are some Mac OS files and archives that absolutely cannot be written to a FAT32 drive either. So, you cannot backup your entire Mac OS hard drive to a FAT32 drive.
    The Mac OS "PKG" file type will usually refuse to be written to a FAT32 drive. And, there are a lot of PKG files in the Mac OS installation. And, many of the software update downloads are also in PKG format.
    If you want to backup your entire Mac OS hard drive to another drive, then that drive will also need to be formatted as a Mac OS X Extended volume.
    But, if you are just wanting to share files between a Mac OS X and Windows XP installation, then you can safely use FAT32 for that shared drive / partition.
    I hope this helps.
    As for the comments that you endured, you should have asked him if his PC would even try to read a Mac OS formatted drive / disk. See how much laughing he does then.
    Now, there are special programs that will enable Windows to read Mac OS disks. But, Windows cannot do it on it's own.
    But, that brings us to another option for you. If you wanted to have all your other partitions fully compatible with the Mac OS (as in formatted as Mac OS X partitions), then you could do that. Then, use a program such as MacDrive on your Windows XP installation to enable you to read and write the Mac OS formatted partitions.
    You can read more about that here:
    http://www.mediafour.com/products/macdrive6/bootcamp.asp
    I hope this helps.

  • How do i recover disk space after deleting windows partition?

    I have a macbook pro running on maverick. I removed the windows partition using bootcamp assistant, but I did not gain the disk space back. The disk space is 500gb but it's still showing 250gb?

    Yes, that matters. So your partition map looks something like this:
    You see one single space surrounded in blue with the disk name in the center, sort of like the above. But, you say that this space is only 250 GBs of your 500 GB drive. In other words the space in the Size field reads 250 GBs, mol? Am I correct in my understanding?
    I suggest you might give this a try: repair the hard drive using Disk Utility. Then restart the computer. See if that recovers the space. It would also help if you could send me a screen image like mine but of your Disk Utility display on the same settings.

  • Increasing Disk Space on VMware ISE

    hi,
    i would like to increase the disk space for Vmware based cisco ise to 600gb.
    Increasing the raw disk space is fine on VMware, but how will the ISE or Linux OS modify the partition to recognise the extra disk space
    thank                

    Refreshing an old thread, but I was faced with this recently.
    If you're prepared to roll up your sleeves with Linux, I've figured out a procedure. In my case I couldn't rehost the license since it's an NFR version - and yes Tarik is correct a restore doesn't bring in the license.
    Some instructions here.
    http://communities.labminutes.com/security/ise-expanding-the-data-partition/

  • To increase disk space i can eliminate all caches, safe or no?

    I often need to increase disc space, is it safe to delete caches? what else is saFr to delete?

    Move the system to SSD device
    Move all the media libraries and data to a "data" drive
    Do a Safe Boot
    Use Carbon Copy Cloner

  • Not all free disk space available for windows partition in Boot Camp

    Hi,
    I want to install Windows 7 via Bootcamp on my MacBook (2009, Mavericks OS, BootCamp Assistant 5.1.2) and unfortunately it has been a huge struggle until now to achieve that. The whole reason for this is that I had Windows XP as the second OS on my MacBook, but I wanted to increase the Windows partition with Disk Utility. Unfortunately this permanently damaged my Windows partition so I couldn't use it anymore.
    What I did next? I decided to delete the old Windows XP (which isn't supported anymore by Mavericks) with Disk Utility, which afterwards tells me that I have 1 partition left: The Mac partition.
    From there on I wanted to install Windows 7 with the newer Boot Camp. The problem is that in fact Finder tells me that my Macintosh HD has 58,54 Gb free space, so I would like to assign at lease 30 Gb to the to-be Windows partition. However, Boot Camp only gives me the option to assign 20 until 24 Gb, other values I can't assign.
    Can anyonetell me why this happens or what could be the problem? I need to have more than 24 Gb available for my Windows as this was the whole reason why I once wanted to increase my old Windows partition, that's where all the problems came from.
    I appreciate your help, thank you!
    Here is what Disk Utility tells about my partitions:

    TTBOMK the only way you can increase the Windows partition is to repartition the drive back to a single partition
    Then reinstall Mountain Lion
    Restore all data from backup
    Create new larger partition with Boot Camp
    Install Windows
    Restore data from backup
    Allan

  • Increasing disk capacity designated for Windows OS

    Dear Apple Community,
    I have installed Windows on my Mac Book Pro, but forgot to increase the disk capacity during the process. As a result, now there is not any free space to copy data or install programs and etc.
    Can please someone suggest good application or tool which will allow me to increase the capacity of Windows Drive (bootcamp) wihout reinstaliing it?
    Thank you very much in advance for your kind help!

    Thank you Shobhit for your reply.
    Does it  mean  that 400G is not close to being enough if I want to complete all of the step according to  BP_CRM_V170_Demo_System_Export_V2.pdf, including TRex installation ?
    Did you install the TREX 7.10 for CRM in your case?
    Thanks and regards,
    Li etsuhin.

  • "Low disk space" error in Windows..HOW DO I FREE UP SPACE ON MY HP RECOVER (D:)

     HP G61 VY438EA#ABU . Windows 7 64-bit.I,AM WIFI FROM MY MODEM ..
    I have an hp G61 ever time i switch on my laptop it keeps coming up with the massage  saying that i kneed to free up disc on recover drive (D.
                         IT SAY'S THAT I HAVE 348mb free of 12.5 CB I HAVE TRIED TO BACK UP ON TO AN EXTERNAL HARD DRIVE BUT I AM WORRIED ABOUT WHAT I CAN NOW DELETE . CAN SOMEONE PLEASE GIVE ME ADVISE ON HOW TO FREE UP A BIT MORE SPACE ON MY RECOVERY DRIVE PLEASE. THANK YOU from {Personal Information Removed}

    Hi,
    Please see the document regarding this issue on the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01508532&cc=us&dlc=en&lc=en
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Upgrade to Win 7 (64bit) from Vista 32 - Not enough H Disk space after running Windows easy transfer

    Hello all!
    I upgraded from Vista 32 to Windows 7(64bit) using the custom install as per instruction found on Lenovo and the upgrade has gone well.  My machine is running much better and faster now.  However, I tried to transfer my files with easy transfer and I have run out of room on the HD.  After the install, my C drive had about 35 Gigs with no other programs installed except for Win 7.  This seems to be too much memory used for win 7 OS.  I am thinking that other data like past restore data may be taking up a lot of room?  Also my Easy transfer file is 79 gigs which also appears to large of a file.  I have not been able to use Easy Transfer because of lack of drive space.  Can I reformat my HD and run a new win 7 install from the Win 7 upgrade software CD?
    Thanks in advance?

    Problem Solved!!!
    This problem was related to the NVIDIA chip defect on the mother board. Please see:
    http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T61-Nvidia-Quadro-NVS-140M-garbled-displ...
    Thanks!

  • P2V and increase disk space

    hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
    Thank you so much for help
    steven

    So, forgive me if I miss use some terms but what I'm trying to do is populate a variable inside a method with objects. My assumption is that it's a string and when you input an object it returns null. Below is a snippet of the code. The first time $This.Vavlues is where I'm having some trouble. My goal is to give the method a user name and a table and it generates a SQL query for me. :)
    Powershell [void] InsertQuery($Table,$Values) { $This.Values = Get-ADUser -Identity $Values -Properties * | select SamAccountName,UserPrincipalName,SID,Mail,DistinguishedName,lastLogon,Description $This.Values = "'" + $($This.Values.SamAccountName) + "'" + ',' + "'" + $($This.Values.UserPrincipalName) + "'" + ',' + "'" + $($This.Values.SID) + "'" + ',' + "'" + $($This.Values.Mail) + "'" + ',' + "'" + $($This.Values.DistinguishedName) + "'" + ...

Maybe you are looking for

  • Download error in (osx) adobe desktop app (corrupted download link).

    Here is a discription of the problem. Please consider that some of the wording might not be correct, as I do have to translate the error message from German into English. Using OSX 10.9.2, when clicking inside the adobe desktop app (top of the screen

  • How to detect if the display pdf in browser is checked for Adobe Acrobat 9

    How to programatically detect if the "Display PDF in browser" option is checked/unchecked in the Adobe Acrobat 9 Pro preferences? In earlier version it was possible to determine with navigator.plugins. Please help.

  • Develop menu missing

    I would like to monitor the activity of Safari 5.0.5, and am running OS X 10.5.8 with original 512 megs of RAM but cannot seem to find the Develop menu.  Heck, I can't even find the Web inspector. What am I doing wrong? The HELP menu suggests the fol

  • Confuse N80 OR N80IE

    Any one can HELP me!!! product code 0535064 its N80 or N80IE.... Just update NEW firmware version v4.0632.0.38 13-10-2006 RM-92 Nokia N80(548.01) why i cant update v4.0707.0.7 can change product code???

  • How do i take off the imovie name in the credits of a trailer

    I'm using iMovie 10.0.7 and my ios is yosemite 10.10.2