Increase distance between objects w/o resizing the objects

Is it posible to increase distance between objects in illustrator cs3 without resizing the individual objects?
For example, I have a series of circles separated from one another by about 20 pixels, aligned into a grid-like formation. I would like to increase or decrease the distance of the circles from one another, without changing the size of the circles themselves.
Thanks,
Regina

As Chris said, use the Distribute functions of the Align Palette. Assume a 5 x 5 array of circles separated by 20 points in each direction. You now want the array spacing to be 30 points.
1. Black Pointer: drag a marquee selection across the top row of 5. Then click once on the leftmost one.
2. Align Palette: Show Options. In the distance field of the Distribute area, enter 30. Click the Distribute Horiizontally button.
3. Select and group each of the other four rows.
4. Select the four rows and one of the top row's circles. Click once again on the selected top row circle.
5. Align Palette: Make sure the 30 value is still there. Click the Distribute Vertically button.
JET

Similar Messages

REP-1070 Object not found in the object store ...

When trying to open an report file (.rdf) in Reports 6 it won't open. I get the error REP-1070 Error while saving or opening ... Object not found in the object store.
I know that in the report there is an OLE object, is that the problem? How can I save the source code when I can't open the file?
Please help!
/Linda

Hi vdha,
Try this..
Get the user account under which the host instance for the send port is configured.
Log-off from your server. Log back in using the service account. The account which is been used in the host instance.
Go to MMC..Select “My User Account” as opposed to “Computer account” as you did.
The import the certificate under “Personal “ folder and “Trusted Root Certification Authorities ”
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Distance between a li marker and the text

I know I'm being a little lazy....
What is the way (best or only) to control the distance
between a marker for an li (disc, square, etc.) and the text for
that li?
Thanks
Tom

Pad the <li> tag.
li { padding-left: 25px; }
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"TCarp" <[email protected]> wrote in message
news:fnkhu0$q7l$[email protected]..
> Thanks John
>
> That was one of the articles I read trying to find the
answer to my
> specific
> question about controlling the spacing. It talks about
controlling the
> DIV and
> the UL but doesn't go into a discussion about the LI,
specifically
> controlling
> the distance between the marker and the text (at least I
didn't see it
> even on
> the re-read).
>
> I guess it's time to set up a test page and drive
through all the
> parameters.
>
> Thanks anyway
>
> Tom
>

OBJECT SKIPPED while transporting the objects from DEV to QA.

Hi All,
While transporting the objects to Quality, I'm getting a warning saying Objects are skipped.
Can anyone please explain how to get rid of this error? We are facing this issue almost for all the transports which we are moving and the objects do not get transported to the next environment. We have to ask BASIS to use overwrite functionality while transporting to fix this each and every time we face an error.
If any SAP notes are available then please share it to me.
Thanks in Advance.

Hi Srikanth,
Objects of the selected object types exist in your system as changeable even if this system is globally set to not changeable. As a result, these objects are no longer connected to the transport system.
check here........
http://help.sap.com/saphelp_nw04/helpdata/en/0e/a7343e8c7f6329e10000000a114084/content.htm
for this try contact basis team.
Thanks,
Vijay.

How to specify character style to anchored objects markers depending on the objects formats?

I have a long document contains much of anchored text frames with custom positions and want to delete them by aplying character styles to their markers.

Create a new character style to apply it. And change the character style name in this code to yours, then execute it.
main ();
function main (){
    app.findGrepPreferences = NothingEnum.NOTHING;
    app.findGrepPreferences.findWhat = "~a";
    var objectsArray = app.activeDocument.findGrep();
    for (var c = 0; c < objectsArray.length; c++) {
        if (objectsArray[c].textFrames.length > 0) //The anchored object is a text frame
            var targetTextFrame = objectsArray[c].textFrames.item(0);
            var textFramePosition = targetTextFrame.anchoredObjectSettings.anchoredPosition;
            if (textFramePosition == AnchorPosition.ANCHORED) // the object have custom position
                //Create a new charater style and change the character style name to yours.
                objectsArray[c].appliedCharacterStyle = app.activeDocument.characterStyles.itemByName("Delete");
Then make a GREP search for this character style, and if you want delete them all by Change All button.

Object Visualization and accessing the object's attributes

Hi all,
I am trying to configure SWFVISU to allow us to call an ABAP Web Dynpro which displays an adhoc object attached to a workflow in the UWL.
I've had success with a business object of a task which is not an adhoc object by binding an attribute to the task container and creating a custom attribute in the UWL. However this is not possible with Adhoc Objects as there could be 0..n objects at runtime.
I've seen plenty of threads that refer to using ${item.externalObjectId} as part of the visualization parameters, ie in Visualization Parameters:
APPLICATION     FMCA_WDY_FPF
DYNPARAM                          WDCONFIGURATIONID=FMCA_WDY_FPF_CONF&RETURN_ID=${item.externalObjectId}
NAMESPACE                          sap
SYSTEM_ALIAS     SAP_ERP_Public_Sector
however in this case the attribute we need access to is an attribute to the Object Class, not the Work Item.
Is there any other variable substitution we can use in the Object Visualization to reference an attribute of the Object Class itself?
Thanks in advance
Alex

Hi,
Please visit the below link. This might help you.
http://weblogs.sdn.sap.com/cs/blank/view/wlg/20379
Thanks and regards,
SNJY

Object referred to by the object key, does not exist

I am trying to create a transport request for an Item Catagory & get the following error message :
Object R3TR TABU TVAPT, referred to by the object key, does not exist
Message no. TR600
Diagnosis
    The object keys of the request/task cannot be edited because the object R3TR TABU TVAPT) which is referenced by the object key is not in the request, nor is it going to be added to the request.
System Response
    The function terminates.
Procedure
    If the error occurs in an application transaction, extend the missing object entry in the Transport organizer (SE09). If the error occurs again, contact the application hotline.

Hi Nitin,
Please check this SAP Note <b>90799</b>.
Perhaps it will help.
Regards,
Ferry Lianto

Interactive form as Callable object error on testing the object.

Hello experts,
I am trying to use a adobe interactive form as a callable object in guided procedure and when I do the testing the error I am getting is:
"Callable object implementation did not return output parameters"
Result: Technical exception
Details: Service call exception; nested exception is:
java.net.UnknownHostException: pwdf3102: Service call exception; nested exception is:
java.net.UnknownHostException: pwdf3102: Service call exception; nested exception is:
java.net.UnknownHostException: pwdf3102
I did check all the configuration setting and everything seems to be all right.
Appreciate any suggestions.
Muthu Sundarresan.

There should be default entry like
127.0.0.1 localhost.
Make an entry below that with your ip address and the hostname. Reward some points pls.

How can i compute the distance between every two strias

how can i compute the distance between every two strias?The distances between every two strias in an image are almost equal .I have a picture for you in the accessory.there are many trias in all kinds of orientation in an image.fistly,i should find the most consious area,because it is simple to compute . Secondly,To improve precision,i should compute the distance of a group of trias,then conpute its average value.i dont know how to compute .pls teach me,thanks very much!
Attachments:
11.jpg ‏12 KB

there is a typical image.
Attachments:
21.jpg ‏23 KB

How to find the objects in an application

Hi
We are trying to increase the performace of our server
During testing we observed that the memory usage is increasing , we wanted to know what are the objects are created at any time
Is there any way to do this , and are there any opensource tools which helps in this process
We presently use prstat , vmstat and pmap commands to watch memory growth is there any other commands which can help us
Thanks
Vijay

jconsole - SUN tool
-agentlib:hprof - additional stats on memory usage
-XX:+PrintGCDetails - additional stats on GC

Envelope distort to center of the object only possible?

Envelope distort to center of the object only possible?
Okay, can anyone please give me a hint how to achieve the effect shown in the image? If not with Illustrator what software can do this effect?
It's like an envelope distort but like the object (small circles) is not entirely wrapped into the envelope.
I tried moving the corners of the applied envelope towards the center of the object but it resizes the entire shape along with it...

Set up the dot pattern (or whatever the art is)
Choose Object > Envelope Distort > Make with Mesh
Enter 2 rows and 2 columns and click OK
This will add 1 mesh point to the center of the artwork.
Use the Direct Selection Tool (the white arrow) to select only that center mesh point.
Double-click the Scale Tool and enter a value larger than 100% in the Uniform Field.

Illustrator thinks I want to resize an object...

Hi, so this is an issue that really annoys me and I'm not sure if there's a solution for it and/or if someone has complained about it.
Basically, if I make a small shape, something about 50x80px and I try to grab the shape to move it to a different location, illustrator just assumes that I want to resize the object and acts as if I grabbed the corner points. I specifically try to click away form the resizing points and it still does it. Its really annoying because the only way I can grab the object is by zooming in and making sure the cursor is now a lot smaller than the shape to move the object. The problem with doing this is that by zooming it forces me to scroll with the object to the place I want to be.
When this happens, my cursor doesn't change to the 'resizing' cursor... the one with the 2 small arrows pointing opposite directions. It stays as the regular cursor.
I am using the Illustrator CC updated to the latest as of this date.

Vhalor,
I believe it is safest to hold Alt/Option when you use the Direct Selection Tool, to avoid the danger of dragging only some Anchor Points.
I wonder whether it is time for the list.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

MInimun Distance between points

Hi all, can you help me understand this program so that I can started:
public static int[] minDistance(int[] x,
int[] y)
Given N points in the plane with integer coordinates, determine the minimum distance between two distinct points in the input. The points will be given by two arrays of the same length, one containing the x-coordinates and the other containing the y-coordinates. Return the indices in the array of a pair of points at minimum (positive) distance from each other, least index first. If more than one pair of points have the minimum distance from each other, return the lexicographically first pair (i,j) of indices of closest points.
Constraints The two arrays will have the same length N, which will be at least two. The numbers in the input arrays will be between -10000 and 10000. Note that you are not guaranteed that there will be no duplicates in the list, but the requirements state that only positive distances are compared.
Examples
(1) { 0,1}, {0,1}. This input represents the two points (0,0) and (1,1). Return {0,1}.
(2) { 0,1,0}, {0,1,0}. Return {0,1} as before, not {0,2}. The point (0,0) occurs twice in the input list, but this does not cause the minimum distance to be zero.
(3) {0,1,2,3,4,5,6,7,8,9,10}, {0,12,34,-48,15,347,8,5,3,2,1}. Return {8,9}; the points with those indices are (8,3) and (9,2).
(3a) {0,1,2,3,4,5,6,9,8,7,10}, {0,12,34,-48,15,347,8,2,3,5,1}. Return {7,8}
Thanks..........

BTW, what's Sedgewick?He's an author.
http://www.cs.princeton.edu/~rs/
A little googling on my part reminds me that it was "divide and conquer" that he was talking about (too many) years ago.
http://www.facweb.iitkgp.ernet.in/~arijit/courses/autumn2006/cs60001/lec-compugeo-2.pdf

Resizing the image

If I want to resize the object(say from 320x240 to 50x50), without disturbing its contents. How do I do that?
-Hane

If I want to resize the object(say from 320x240 to
50x50), without disturbing its contents. How do I do
that?
-HaneWhat? That can't be done.
Kaj

How to see the object while moving on the artboard?

hello everyone;
maybe a silly question; how to see the object while moving on the artboard? i dont wanna see only the objects bounding box(outline of the object). i wanna see the object it self. thank you.

What have they gone and messed up now?
When I drag an object (with bounding boxes turned on), the object moves and the bounding box stays still until I stop dragging, upon which it snaps to the object’s new position.
If I don’t have bounding boxes turned on (as I usually work), the object moves when dragged.
If what Bedri says is right, they’ve gone and mended something that wasn’t busted.

Increase distance between objects w/o resizing the objects

Similar Messages

Maybe you are looking for