Increase IFS/CMS Performance by changing db Parameters

Can anyone help me by identifying which Oracle database parameter should i change to increase performance relating to working with files in cms?
Such as file retrieval, editing and saving.
Not raletd to optimising the network.
Thanks

Did u find how to do that ?
i need it too.

Similar Messages

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
David.

Paragraph breaks are good for readability. ;-)
Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

Increase Performance without changing profile parameter

Hi folks,
How to Increase the Performance without changing profile parameter ?

One of the easiest ways to gain some performance is to turn off any unnecessary services running on the server. Depending on the platform, you can gain some memory by just removing these (turn off sendmail or postfix if you are not sending any messages [monitoring or otherwise]).
J. Haynes
Denver, CO

Is there a possibility to change step-parameters during debug execution ?

Would be helpfull to be able to change step-parameters during step-by-step dubugging execution.
Has someone got an idea ?

Hi bestware,
I am assuming you want to provide some sort of debug from your Operator Interface.
I've been looking at using the SequenceFilePreStep and SequenceFilePostStep to provide some sort of debug.
Using the SequenceFilePreStep callback you could place some code in here to evaluate the step running (about to be executed) and display an appropiate Dialog box to allow the user to change any of the available parameter.
My simple example tests if the step is a NumericLimitTest step type and if so, allows the user to change the Upper Limits only (said it was simple).
Now to Looking at the Locals and Parameters in the Sequence of the Step about to be performed. You will have to look at RunState.Caller.Locals and RunState.Caller.Parameters. Get a list
of the variables, find out the type and provide the suitable interface to be able to modify the contents.
Look at here http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=506500000005000000FF750000&HTHREAD=000030207&UCATEGORY_0=_8_&UCATEGORY_S=0 and see what Dan has been doing in this area.
Hope this is a start.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
Debug_Example.zip ‏6 KB

Can we change the parameters of the authentification's popup ?

Hello,
I'd like to know if we can change the parameters of the window popup of
authentification, when accessing a servlet, or an html page for example.
I created a realm, but i'd like to link it with my servlets or pages.
Thank you !

Actually I want to increase the screen size such that the browser scroll also expands and the pop up shows up and when the popup closes resizing happens.
Can you help me with some code samples of how to effect the above requirement?

How to change NLS parameters in Oracle XE?

Hi
I have to change some parameters in database using Oracle XE server but I don't know how to do it. I must change these parameters:
NLS_CHARACTERSET
NLS_NCHAR_CHARACTERSET
How to do it?
Thanks for help.

Thanks, but I'm newbie and I have to ask you about more details :)
What do you mean when you saying: init file (or spfile)? Where can I find these files?
Registry entry (NLS_LANG) is correct, but when I'm using web based administration application I can see more NLS settings. Unfortunately I can't change them :(
Using XE version I can't (I'm not sure about that) create another instance, there is only one instance created by installer. Is it possible to change NLS settings in this case?

How to change NLS parameters in SQL Developer?

I think that Oracle National Language Support is quite confusing. How can I easily change NLS parameters for SQL Developer (for all connections) to match exactly those that my database is using?

Hello,
SELECT 5/8 x FROM dual;F9 -> 0.625
Change decimal separator in preferences
F9 -> 0,625
It is different when I execute a query/script with F5, then I always get 0.625
SELECT * FROM nls_session_parameters
WHERE parameter = 'NLS_NUMERIC_CHARACTERS';
PARAMETER                      VALUE
NLS_NUMERIC_CHARACTERS         .,
SELECT 5/8 x FROM dual;
         X
     0.625
Change settings
SELECT * FROM nls_session_parameters
WHERE parameter = 'NLS_NUMERIC_CHARACTERS';
PARAMETER                      VALUE
NLS_NUMERIC_CHARACTERS         ,.
SELECT 5/8 x FROM dual;
         X
     0.625Even changing the settings with ALTER SESSION makes no difference
ALTER SESSION SET NLS_NUMERIC_CHARACTERS = ',.';
SELECT * FROM nls_session_parameters
WHERE parameter = 'NLS_NUMERIC_CHARACTERS';
PARAMETER                      VALUE
NLS_NUMERIC_CHARACTERS         ,.
SELECT 5/8 x FROM dual;
         X
     0.625
ALTER SESSION SET NLS_NUMERIC_CHARACTERS = '.,';
SELECT * FROM nls_session_parameters
WHERE parameter = 'NLS_NUMERIC_CHARACTERS';
PARAMETER                      VALUE
NLS_NUMERIC_CHARACTERS         .,
SELECT 5/8 x FROM dual;
         X
     0.625It seems the script output does not care about my settings :-(
Regards
Marcus

Change step parameters in teststand edit mode

Hello,
I would like to know if it's possible to change the parameters in a step in edit mode of teststand.
I have attached a sequence with one step, in this step I want to select DMMx.
After the selection I want to teststand to fill in the parameters in the step so I can the choose which type of measurement and such.
If this is not possible how could I make something like this possible.
As you may see this will be a HAL, and the only option I can see which would do this is bij a string array but I don't want to type in the commands in string.
Attachments:
ring.vi ‏14 KB
Sequence File 1.seq ‏5 KB

Hi Darkxceed
My recommendation for doing a HAL i TestStand would be to use an object oriented approach.
Create a class hirachy of your instruments like the following inside of LabVIEW:
Then use Dynamic Dispatch to make TestStand choose the instrument of interest. There is an example of using Dynamic Dispatching in TestStand here:
TestStand Using LabVIEW OOP Truck Example
https://decibel.ni.com/content/docs/DOC-24098
This solution will offcourse require you to read up on creating applications using object oriented programming in LabVIEW. We at NI have a course that walks you through both the theory and practical implementation. It is called Object Oriented Programming in LabVIEW. If you have a SSP agreement, you should be able to find it as Self Paced Online Training as a part of your contract.
There is also a good introduction to OOP in LabVIEW and HAL here:
https://decibel.ni.com/content/docs/DOC-32506
(There is a video embedded in the PDF)
Best Regards
Anders Rohde | CLD | Platinum Applications Engineer | National Instruments Denmark

How to Change Database parameters as suggested by EWA report

Dear Experts,
As per EWA report , i have been asked to change several DB parameters as per note 0124361 . Should i go aghead and change the parameters ? What is the procedure of chaging those parameters? what is the real process that should be followed ? Please revert.Points guaranteed.
Regards,
Somya

Run "brspace -f dbparam"
Select option 1 "Change parameter value" and change the parameters. After changing select option 3 to create a new init.ora.
If you change parameters that have the scope "spfile" oracle requires a restart. If you only change parameters with scope "both" you don't need a restart of oracle. This changes are affected on the fly.
To restart oracle:
connect / as sysdba
SQL> shutdown
SQL> startup
You don't need to stop SAP if you only change oracle parameters. SAP reconnects automatically if the database is up.

Perform some changes on standard SAP webdynpro for ABAP application

Hi,
We do need to perform some changes (new buttons, new tabs, adding new code etc) on a standard SAP product developed on Webdynpro for ABAP.
Which is the best approach to do so? I have reading about enhancement framework and it seems to be right solution to do so. Am I correct?
Any best practice to acomplish our target is very welcome.
Looking forward to hearing from you.
Kind regards,
Imanol

You are on right track thinking about enhancement framework.
My approach is would be in the following order.
Personalization/customization
Enhancement
Modification

How to change the parameters(rot x,y,z &dictance) to get Kinect Fusion Explore Multi Static Cameras sample work?

Recently,I start to pay attention to the function 'Kinect Fusion Explore Multi Static Cameras sample' In SDK 1.8.
Here ,I use two kinects ,but I have no idea how to change the parameters(x,y,z &dictance) in the red rectangle to make it work successfully.
By the way,I hava calibrated the two kinects' camera and get the related perameters.

sorry，I can't add the image to my question...~~~~(>_<)~~~~

Change J2ee parameters on WAS 640-J2EE add in -config tool

I have started the config tool to change java paramters per SAP.
However I notice that config tool shows dispatcher and server and below that an instance (xxx-318782 for example) which has a dispatcher and server also.....
Why is this and which do I modify to change java parameters?
Alos where can I find the setting, it is somewhere under services directory?
Thanks
John R

Hi,
the dispatcher and server nodes that appear right below the root of the tree in the Config tool contain global properties (services and managers' properties). This means those properties are used globally instead of the default properties. For more info, refer to this page: http://help.sap.com/saphelp_nw04/helpdata/en/36/e71bbee9ab4677a744d4c4484b0bf4/frameset.htm
Next, the dispatcher and server you find under the instance xxx, are actually the elements that you've installed for your system. Changing a property on any of them applies locally, i.e. to the corresponding node (server or dispatcher).
To set java parameters, you need to click on the dispatcher or server (depending on which element's java props you need to modify). On the right side, under General tab you'll see the Java parameters field. Here is the relevant documentation: http://help.sap.com/saphelp_nw04/helpdata/en/39/7796e0a7be604ab63c2924045710a8/frameset.htm
Hope that helps!

Change request parameters

Hi,
I have a servlet and would like to change the request parameters before forwarding that request to another servlet.
But how can I change the parameters? I thought it would work with request.setAttributes, but the parameters are not being changed. How can I change the parameters then???

Hi Joberc
1. Did you read javax.servlet.Filter API of Servlet 2.3.
It allows us to do some filtering in between and forward to another servlet
http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/Filter.html
You can also search for code sample and see how it works.
2. As for your specific question and if possible, can we view your code to see
-- Paul.

Change step parameters order

Is it possible to change the parameters order?
Or are they locked and only defined by the connector pane?

Hi Darkxceed
My recommendation for doing a HAL i TestStand would be to use an object oriented approach.
Create a class hirachy of your instruments like the following inside of LabVIEW:
Then use Dynamic Dispatch to make TestStand choose the instrument of interest. There is an example of using Dynamic Dispatching in TestStand here:
TestStand Using LabVIEW OOP Truck Example
https://decibel.ni.com/content/docs/DOC-24098
This solution will offcourse require you to read up on creating applications using object oriented programming in LabVIEW. We at NI have a course that walks you through both the theory and practical implementation. It is called Object Oriented Programming in LabVIEW. If you have a SSP agreement, you should be able to find it as Self Paced Online Training as a part of your contract.
There is also a good introduction to OOP in LabVIEW and HAL here:
https://decibel.ni.com/content/docs/DOC-32506
(There is a video embedded in the PDF)
Best Regards
Anders Rohde | CLD | Platinum Applications Engineer | National Instruments Denmark

Increase Apply Process Performance

Dear All,
I want to know how can I increase Apply Process Performance in Oracle Streams Setup.
I use Windows 2003 and Oracle 10g R2

Check metalink Note:335516.1
HTH...

Increase IFS/CMS Performance by changing db Parameters

Similar Messages

Maybe you are looking for