Increase in Loading time for LV search in 2011

Initially when I loaded LV2011 my quick drop and the search took nearly 5 seconds but now it takes nearly 20 seconds to load so is there any reason for this kind of performance. Also I don't have anyother big software loaded or running in my PC. I have added few toolkits from VI package manager may be that is the reason?.
The best solution is the one you find it by yourself

RavensFan wrote:
In my message in the other thread, I commented that I thought 20 seconds wasn't all that long. But I thought you were commenting on the loading time for LabVIEW itself. That does seem like a long time for any of the internal LabVIEW dialogs to come up.
(Actually, I find several internal dialogs seem to take longer to load the first time then they should including the properties dialog. But not 20 seconds long.)
Hopefully, with this message thread in the LabVIEW forum, others can comment and offer suggestions on how to determine what the issue your having is.
Yes now I have plenty of toolkits ( Thanks for spotting me in the other thread )
Jeff you hit the bullseye. The loading was set as Load palette when needed.
Thanks
The best solution is the one you find it by yourself

Similar Messages

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

Slow load times for itunes u

We have noticed that lately iTunes U for UW-Whitewater (uww.edu) has been extremely slow, and sometimes even timing out. We have been trying this from various different locations and computers. It appears to be something on the apple side. Has anyone else seen this?
Apple Engineers: Any updates as to what might be going on?

Greetings Guys;
We had the same issue yesterday, but the issue seemed to be affecting only the iTunes desktop application. When I would preview using the iPad, load times were normal. The issue seems to have been resolved this morning.
Syd Rodocker
Tennessee State Department of Education

How to decrease loading time for 0Mat_Plant

Hi Experts,
I am currently looking to decrease loading time of 0Mat_Plant. I have gone thru performance material available and checked following things listed below :
Plz note following:
1) Standard delta is avail but it has been enhanced and there are Z fields. So if i use delta, them I might be missing delta for Field.
2)Can we switch OFF number range SID buffering to avoid memory allocation on daily basis ...somehow through ABAP program?
3) BUffering can be switched OFF, but there is delta load also alonwith full load. So performance would decrease for delta records. But no of records for Full load is 188000 and for delta is just 1700 around. SO will this helps in decreasing overall time? Any idea?
Load is taking around 90 minutes in my system (Full Load)..
I m not clear abt data package size and if it will help me or not..
What more can we do??
Any help would be appreciated and points would be assigned......
Thanks in advance
Gaurav
Message was edited by:
Gaurav

Hi Nagesh,
Here are my replies;
1) Loading time is only for 0mat_plant..
2) R/3 job finishes quickly....no prob seems to be with this..
3) I m not clear about "locked trfc..but there are no errors in trfc...and there doe snot seem to be IDOC clogging problem...
4) Not sure what yu mean by trfc "released"....
I checked R/3 JOb log and its pasted below ( though for other datasouce)....
I want to know wht does it implies.....in general i hve few questions listed below after the log..::
BEGIN BW_BTE_CALL_BW204020_E 13.514
END BW_BTE_CALL_BW204020_E 13.514
BEGIN EXIT_SAPLRSAP_002 13.514
Datasource:0MATERIAL_ATTR, In: 13.514 , Out: 13.514
END EXIT_SAPLRSAP_002 13.514
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
IDOC: Info IDoc 2, IDoc No. 442405, Duration 00:00:00
IDoc: Start = 26.06.2007 19:34:06, End = 26.06.2007 19:34:06
tRFC: Data Package = 1, TID = 0A01A001012F4681A2A7362D, Duration = 00:0
tRFC: Start = 26.06.2007 19:35:03, End = 26.06.2007 19:35:04
BEGIN BW_BTE_CALL_BW204020_E 0
END BW_BTE_CALL_BW204020_E 0
BEGIN EXIT_SAPLRSAP_002 0
Datasource:0MATERIAL_ATTR, In: 0 , Out: 0
END EXIT_SAPLRSAP_002 0
Asynchronous transmission of info IDoc 3 in task 0003 (0 parallel tasks
IDOC: Info IDoc 3, IDoc No. 442406, Duration 00:00:00
IDoc: Start = 26.06.2007 19:35:04, End = 26.06.2007 19:35:04
Synchronized transmission of info IDoc 4 (0 parallel tasks)
IDOC: Info IDoc 4, IDoc No. 442407, Duration 00:00:00
IDoc: Start = 26.06.2007 19:35:04, End = 26.06.2007 19:35:04
Job finished
I want to confrm my understanding abt extraction process when infopackage gets triggerred...
Infopackge gets triggered....->R/3 job gets created/triggered....-> Info iDoc regarding request sent to BW..-> Application document(??)) posted..(( posted to what???.... passed to Trfc??....and then to psa which is seen in monitor??))...
Like wise after successfull passing of datapackage to BW ( not posting to pSA) , next datapackage is sent..... and so on...
What is TRfc?? .as far I know its function modules created to pass data to bW thru RFC call...(??)...
IF you can give me clear picture of whts happening behind the scenes, it would be great.. or helpful links would do....it would be help me to enjoy wht you ae saying and how to tune more...
THanks for your patience and help...
Already assigned points to you..
PS: I hve turned OFF buffering for master data records greater than 100, 000 and saved approx 25% for each master data records....
Regards
Gaurav

Increasing Report Loading Time

I am currently generating a report table through Visual Studio 9 and uploading it to our SQL Server. Before I go any further, I am a complete novice/beginner with this and it is my first time, so sorry if what i'm saying doesn't make complete sense. The
project deploys and I can open it, but it takes around 45 seconds to a minute to just load about 100 rows of data. What are some things that I can do to speed up this process?
Thanks in advance.

Hi TIGSlayer1,
In Reporting Services, the total time to generate a reporting server report (RDL) can be divided into 3 elements:
Time to retrieve the data (TimeDataRetrieval).
Time to process the report (TimeProcessing)
Time to render the report (TimeRendering)
Total time = (TimeDataRetrieval) + (TimeProcessing) + (TimeRendering)
Those 3 performance components are logged every time for which a deployed report is executed. This information can be found in the Executionlog view in the ReportServer database.
References:
Troubleshooting Reports: Report Performance
ExecutionLog2 View - Analyzing and Optimizing Reports
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Load time for a 1hr m2v and wav timeline

Hardware: Intel P4 3.2ghz, 3GB ram, Nvidia FX 5700, Asus P4C800 mobo, m-audio delta-66 sound
I'm experiencing a lengthy wait time to load a 1hr video and sound track as timeline. It has been loading for over 25 minutes now and thelittle splash screen reports over an hour to go... as I write this note.
I'm curious if that is about normal an this kind of hardware? I ask because I loaded the same video and sound file into DVD architect in less than a minute. and I've had really bad trouble with Encore CS4 crashing repeatedly. Or locking up and having to be killed.
I moved the whole shooting match to a different machine and am able to at least run Encore, but wondered if the lengthy load time is a signe of trouble on this machine too.
Oh, and nothing else going on while the video is loading... (just normal stuff running as always)

the_wine_snob wrote:
Harry,
Tell us about the I/O sub-system, i.e. your HDD's, their size, speed, controller type and how they are allocated. The operation of Importing is highly dependent on the I/O.
I forgot to mention the OS too. WinXP pro sp/3
HDD:
1 IDE 250 GB partition1 65 GB OS, partition2 185 GB data
2 Sata 200 GB No partitions
All are 7200 rpm (or whatever the 7200 stands for)
The work is located on 1st sata drive (E)
Common stuff for the hardware its on. Also I recall loading stuff in `the blink of an eye' when I was using CS2 Encore (On this same machine, but no longer no installed)
I see a monster thread here about Nvidia cards and Encore crashing. I do have an Nvidia FX 5700 as mentioned earlier, and it has the latest drivers available at nvidia site.
Also I have hardware acceleration set at 50 percent... Encore will not run with it set 100 percent.
Acceration itself should not come into play when importing right?

Long loading times for Safari on iPad Air with iOS8

I've had long loading times in Safari sInce upgrading to iOS8 on my iPad Air 128 GB. Are any of you having the same experience?

Sometimes I question myself, how come that iOS being held in beta for over quarter or even over a half a year, and most certainly long enough in alpha, still comes out so much raw and buggy every release? Sometimes it feels like it's only getting worse concerning the debugging.
I wanted to address the HR manager of the Apple Inc. to query him/her about HIS/HER dedication to the overall work being done. Why, the ****, does Safari get slow, why, the ****, is it unpredictable to define whether a sound stream in Safari's tab will end upon tab closure or not. Morever, why do iPhone iMessages fail to mark a message or a chain as a read one even thought you just really did it. Beyond that miriad of similar questions I have just another three, since when is it official Apple support position to advise you to wipe out your device and install everything back from iTunes, not the cloud? But what is more important, how come that support representative tells you first to back up your buggy iPad, wipe it out and restore from that backup both with iTunes? Finally, we all know how Apple does cherish it's developers, can somebody tell me how, for heavens sake, this website ever possible to exist then — Texts From Xcode?
I don't want neither need to mention that switching between tabs in iOS7 (I have had no chance to test it in iOS8) in Safari never gave you any sure answer whether your tab will be reloaded when you get back or not: whether have you copy any post before leaving, to paste back on return or not.
After all I do still love Apple, I do love people's ideas. I do love the overall outcome, but I want to tell Mr. Cook one phrase I heard when I used to be a head of a department in a medium size company and had to deal with continuous fails of the personnel and most often ended up doing much things myself, it was not the exact situation as with Apple although I hope you can trace a path: If a manager has to do anything besides managing he or she failed to manage one major issue — the personnel one.

Extremely long load times for Cisco's WEBEX.

Thanks

My company attends numerous meetings with our customers/suppliers and WEBEX is giving me headaches. 5-15 minute load times. Conference room PC is running win7 and I've tried both google chrome's webex app and just running webex from IE to no avail. These connections do go through eventually but I'm constantly hounded about why they are taking so long and I don't know why. Have any of you experienced this or have any clue as to a possible root cause?
This topic first appeared in the Spiceworks Community

Load Time for executable

Hi,
I've just built an exe from a vi that loads very quickly. It takes about 10s to display the icon in the task bar and then more than 40s to display the front face.
I've disabled everything in my vi so that the only thing made at start up is an apparition of the front face from 100% transparancy to 0%. In the exe i just include my vi.
Do you have an idea to fix this?
Attachments:
diagram.JPG ‏148 KB

Remi
Here are attached the CPU charge of the vi itself and the vi in exe. I've checked the while loop and added some timings which improves a lot the load time of the vi and a little the load time of the exe.
I don't use high resolution images on the front panel.
I'm using Labview 8.5 under windows XP SP3. I don't know exactly the version of the driver installed (I couldn't find).
The application is acquiring data on a RFID system and after some analysis fills a database. In the meantime, a bigger part of the database is read and displayed on the main front panel.
It has been designed by launching 6 times the same acquisition vi (which is composed of 2 loops one generating data and one consumming datas) in order to try to rich real time treatment.
Best regards,
Julien
Attachments:
CPU charge.PNG ‏359 KB

How to increase load time for mobile client platform on handhelds?

Hello Experts!
I have developed an application for my mobile client on handheld, but i have a problem with performance, my problem is on load of client, elapsed time to load this ambient is 25 seconds, somebody have a solution to increase a performance to load Mobile client on handhelds?
Regards
Ronaldo Rampelotti.

I was given this a long time ago back when I was developing on SP3
Not sure if they are all valid or more have been added.
I thought I posted this awhile ago, but can't find it maybe it got deleted.
These CSS properties are ALL or NONE, you cannot specify by View or by some class id.
I think there are suppose to be improvements in next version of MI client.
Name of the property
default
     stylesheet.default.backgroundcolor
     stylesheet.default.foreground
     stylesheet.default.font.name
     stylesheet.default.font.size
     stylesheet.default.height
     stylesheet.default.bordercolor
brandingarea
     stylesheet.brandingarea.backgroundcolor
     stylesheet.brandingarea.bordercolor
     stylesheet.brandingarea.font.size
     stylesheet.brandingarea.foreground
     stylesheet.brandingarea.height
     stylesheet.brandingarea.brandingtext
button
     stylesheet.button.backgroundcolor
     stylesheet.button.font.size
     stylesheet.button.foreground
     stylesheet.button.height
label
     stylesheet.label.backgroundcolor
     stylesheet.label.font.size
     stylesheet.label.foreground
     stylesheet.label.height
caption
     stylesheet.caption.backgroundcolor
     stylesheet.caption.font.size
     stylesheet.caption.foreground
     stylesheet.caption.height
inputfield
     stylesheet.inputfield.backgroundcolor
     stylesheet.inputfield.font.size
     stylesheet.inputfield.foreground
radionbutton
     stylesheet.radiobutton.radiobutton
linktoaction
     stylesheet.linktoaction.backgroundcolor
     stylesheet.linktoaction.font.size
     stylesheet.linktoaction.foreground
     stylesheet.linktoaction.height
statusbar
     stylesheet.status.backgroundcolor
     stylesheet.status.errorcolor
     stylesheet.status.messagecolor
     stylesheet.status.warningcolor
table
     header
     stylesheet.table.header.backgroundcol
     stylesheet.table.header.foreground
     stylesheet.table.header.height
     stylesheet.table.header.font.size
     content
     stylesheet.table.content.backgroundcolor
     stylesheet.table.content.foreground
     stylesheet.table.content.height
     stylesheet.table.content.font.size
     footer
     stylesheet.table.footer.backgroundcolor
     stylesheet.table.footer.foreground
     stylesheet.table.footer.height
     stylesheet.table.footer.font.size
imagebutton
     stylesheet.imagebutton.backgroundcolor
     stylesheet.imagebutton.font.size
     stylesheet.imagebutton.foreground
image
     stylesheet.image.backgroundcolor
I don't know about the client arguments, usually that was a guess\try and find out.

Slow load time for Quick Time in Mail

Does anyone know why when you receive a video file (like WMV) in Mail that Quick Time takes so long to load it? It did not use to take so long before Snow Leopard. If you click on play before it is loaded, you get audio only. Are there any work arounds or something other than Quick Time that can be used?

From Adobe Support: 17 secs response time is a normal time interval for the "Print Settings" dialogue.

Very Slow Load Times for PDF Document

Hi,
I have a PDF document that takes forever to load in preview (on the order of a minute or more). It is eight pages, but when I try to go to the last two pages, each of which has a drawing created by using Autoshapes in Microsoft Word, again they take a minute or more to load.
The document looks to have been created by Acrobat 6 for Windows from a MS Word document. Adobe Reader 7.0.7 on another machine loads the document correctly and speedily (well, as speedily as Adobe Reader can...).
Are there known problems with this type of graphics, MS Word drawings, in a PDF document? Is there any way I can make the document load faster?
Thanks,
Jeff Corbets

Hi there
I have a tutorial on this process available at the link below:
Click here to view
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Long load times for large video tracks

Is there a recommended file size to stay under for video tracks in iTuens U? I know the hard limit is 500Mb per upload, but it seems as though any file that is more than about 10 minutes in length takes upwards of 10 minutes or longer to load. A short video (under 5 minutes) will load immediately. Is iTunes content not really streamed?

No, it is not streamed. But iTunes U isn't setup to be a streaming service. If you sniff packets (I didn't want to, but our security guy made me because of a local issue ... long story), you'll see that content is grabbed by way-of-an HTTP GET. There is a certain sense to that ... iTunes and iTunes U are, effectively, aggregators of content. You can get iTunes U to stream ... sort of ... but it is not a true streaming service (and, in fairness, it wasn't designed to be).
There is a trick you can play with encoding ... I don't have my notes with me (someone will remember) ... wherein you can ask that content be encoded to play as quickly as possible ... "instant on". There are a couple of apps, I believe, that help automate the process. It is not the same as streaming, but is helpful in situations in which you want a streaming effect.

Brand new iMac, and the load time for internet use is very poor

Brought my new iMac home today. 2.7 GHz intel core i5
Got it set up with my wireless and i am very unimpressed with the internet and loading speed. My phone, 1 lap top, and 1 ipad use wireless in our house along with the iMac. i have a cisco linksys E2500 is that sufficient enough all of my usage? No gaming more than what a todler would play on. Basic internet use and editing pictures.
My question i guess is, is it my router or are iMac's just not that fast?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Increase in Loading time for LV search in 2011

Similar Messages

Maybe you are looking for