Increase Ipod Classic Speed Performance

Yesterday, i just fooled around om my pc, and i found the option to defrag my ipod.
so i searched on the web if it was safe, and they gave me the green light.
so i just did it, and it is great!!! it really increased the speed of my ipod.
it got the sensation of the speed increase by the updates back by just a simple defrag, which i didnt do on my ipods for 3 years.
it seems that formatting and reloading works as well, but i havent tested that.
about 30% of the coloured part was fragmented and all was solved, so only white and blue in the colour-scheme afterwards.
maybe a tip to use against people whining for new speed increases in the firmware

I just did this and it does increase the general speed of the iPod! It doesn't make coverflow much quicker except album artwork i think loads slightly quicker...
It's also quicker when you select a song and getting the album artwork for it and when you go back from say games back to the home screen it's much quicker at changing the split screen...
Good find!
Thanks
Mike

Similar Messages

Music fade feature for Ipod Classic?

I was recently listening to a new Itouch and noticed that when I was listening to a song and then selected a new song without letting the current song finish, the music on the "Now Playing" song fades away. How can I get my Ipod classic to perform this function?

You can send feedback/feature requests directly to Apple at this link. However existing Classics and Touches are quite different devices so it may not be something that's technically possible on existing Classics. It might be something that could be introduced on a future version: Apple Product Feedback

Speed up iPod touch's performance

Just overnight, I've realised significant drop in my iPod touch's performance while playing games. Games that used to run perfectly smooth now 'lag', which makes the games unplayable. I don't remember doing anything different to my iPod, it was just one day 'fine', the next day 'not fine'. I've restored my iPod, and before I play a game I go into airplane mode, close all running apps in the background, and restart the iPod, but the game still does not run as well as it used to just a few days ago.
Any suggestions on how to improve the speed?

Take off unecesary apps, movies, music etc you no longer use that will speed it up considerably
I assume that you're using an 8GB 2nd gen (there is no 8GB 3rd Gen) since speed is a problem

Have ipod classic and after performing synch have lost almost 800 songs - how do i find the missing music please

have ipod classic and after performing synch on this occasion have lost almost 800 songs and they do not appear in my library either.

If the music has disappeared from your iPod and is not in your iTunes library, I'm afraid you are out of luck. If the lost music was imported from CD's are from outside the iTunes store, you'll need to reimport each of those tracks.
Otherwise, if the music was purchased from the iTunes store and you are using iTunes 10.3 or later and living in the US, you can redownload it again at no cost. See this article for more details.
http://support.apple.com/kb/ht2519
B-rock

My audiobook speed has halved to slow speed, but my ipod classic is fine and normal speed. How can I restore this speed to normal again and why has it done this?

what is it with altering the speed of play of audiobooks and voice recordings?
Why only the iphone affected and not the ipod classic?

I've just discovered the answer, tap the screen below the top play bar in a seemingly blank area then another set of controls appears which were previously hidden and on the right is a little box which controls the speed. Mine was at half speed. It is so not obvious..........I ahd to find this in the downloadable instructions online.

What do I need to buy in order for my iPod Classic 160GB to connect with my blue tooth speaker

What do I need to buy in order for my IPod Classic 160 GB to connect with my blue tooth Ultimate Ears Boom speaker?

Upgrading RAM and your HD will give you some performance gains, but depending on what you are doing, it may not be enough. Your best friend will always be processor speed. This has a direct relation to how many cores and the speed of the RAM.
However, if you are unable to spring for a new computer, then the options of running more RAM and a biggger, faster HD should ruduce some bottle necks.
Here is a site where you can check out what your computer can handle http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade They have some charts comparing speed gains with various components.
Are you using the track freeze option to manage the track count and subsequent demands on your machine?

IPod Classic 160 GB doesn't work for audiobooks in BMW X3 F25

Hello
I have been owning a 160 GB iPod classic for a while now. I have newly acquired a BMW X3 (2012 Model, F25). The problem is that when listening to audiobooks, the iPod doubles or triples the speed (and pitch) when I return to the car after having parked. So it runs fine at first, then I stop and park the car and return and then it sounds like Donald Duck is reading to me ;-)
The car comes with the USB interface to which once can connect media players like the iPod. I am using the original BMW "Y-shape" cable that has once connection on the iPod that then splits into an USB and a 3.5mm jack. I also tried cables from Belkin and the cable that came with the iPod, but all to no avail.
It is not the Audiobook faster/slower function of the ipod that is activated because that would not change pitch, it's like "the record is turning too fast", you can see the seconds in the car's display movig much faster than at a second's pace. The iPod subsequently retains this increased speed even if not connected to the car anymore and can only be slowed down again by resetting it.
I onw an older iPod photo 80 GB which does not exhibit this behavior.
The iPod classic 160 is at the latest software level and so is the car.
Any ideas?
Regards
Chris

Having the same issue. See https://discussions.apple.com/message/23993137#23993137.

80 gb Ipod classic

my ipod classic is not being read by my computer. My computer tells me to format it, and tried but it says that windows can't complete format. tried to change read-only by going to properties but i i don't know how.

Check your iPod with Diagnostics Mode
It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for Manual Test, then select IO > HardDrive > HDSMARTData to reveal your stats. For comparison here are mine taken when my 6th Generation Classic was about 2 years old:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press SELECT & MENU for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
Reallocated Sectors Count
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
Pending sector count
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
tt2

IPod Classic no music, freezing iTunes, not showing up, HELP????

I have a used iPod Classic 120GB. I bought it off my friend. I took it home and added my files (about 5,000 songs and 13 videos) to his stuff (about 6,000 songs) and ended up with it being about half full. I let it sync, then ejected and disconnected. But it said there was nothing on it. I went back and reconnected it to my iTunes. The iTunes froze, and I couldnt access the iPod in anyway. I disconnected it, and when I did it unfroze everything, and popped up in iTunes, saying that the iPod was missing.
I checked the iPod's "About" section and it said that it had 56GB of "Other". I took it back to my friend and he said he deleted the folder with everything in it. It is empty now except for 1.2 GB of who knows what, but still freezing my system and not showing up.
I have tried restarting it, and putting it into disk mode. Nothing worked.
HELP
Version: 2.0.1 PC
Message was edited by: black-belt-boy

jartis wrote:
HI, i am having the same issue with my ipod. Can you please tell me what you mean by putting on "disk mode" and deleting the files? Thanks
First let's make sure the drive is physically OK...
*Check your iPod with Diagnostics Mode*
It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
<hr>
Assuming you've ruled out a physical problem with the iPod's drive we can now move on to check for logical problems...
*Check iPod hard-drive for errors*
Hold Select+Menu on the iPod for about 6 seconds until it resets, then hold Select+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Open iTunes and in the Sync tab of the preferences menu check *Disable automatic syncing of all iPhones & iPods*. Now connect your iPod to the computer, wait until it connects, then close iTunes. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors* (Optional - takes ages but a good idea if you've reason to suspect physical damage). Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore. It might also pay to check the status of the source drive containing your media, particularly if no errors were found on the iPod.
And if that still doesn't help try Erase your iPod - The Super Fix for most iPod Problems. Basically a low level format of the iPod’s hard drive to get around whatever problems are stopping iTunes from restoring it.
Once you've restored your iPod don't rush to dump all the data back exactly as it was before. I have found that lots of large or complex smart playlists can sometimes trigger constant reboots or dumping of the iPod's library. In addition, larger transfers can fail leaving data in an inconsistent state. Try this technique for populating the iPod in stages.
*Break up large transfers*
In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos, playlists etc.
tt2

Ipod Classic 160gb transfer data software? Do Apple provide any facilities to recapture all music etc from an ipod classic and save them back into the itunes library or even better onto a separate pc memory or external drive for backup purposes?

I now have around 3,000 songs on my ipod Classic and still adding. I didn't want to save them in itunes library so I deleted them from there once I had them on the ipod. I have since found out that the ipod music cannot be transferred back to the itunes library nor can I extract them from the ipod directly. Do apple provide such facilities or softwareto do this and, if not, is there any recommended and safe software to perform it? I see from Google that there are plenty of programs available but I want to be sure that what I use is safe, reliable and not breaking any of Apple's terms and conditions. Any advice would be welcome.

Hello Chris Jones,
I just found this and I'm trying to figure it out so your post is an excellent starting point, thank you! Since you posted this in Feb are there any things you would change or you found out after doing it? And how is everything running?
As a data point, I just added a SSD as the startup drive to an older mac pro (1,1) which is only used for Logic Pro and the speed now is amazing. Now I want to see if I can off-load the same things you have dealt with. Any additional insight will be greatly appreciated and thanks again for taking to time to document it.
ld foster

Does leaving ipod Classic constantly docked damage the battery or the screen?

I have the iPod Classic 160GB. I rarely use it at home, I prefer to play CDs and vinyl, but use it when I'm on the go. So, when I'm at home it's constantly plugged into a docking station, with the 'charged' symbol on the screen all the time. Will this cause any damage to the screen (such as screen burn), or the battery?
Thanks

No. As long as you periodically discharge the battery when you are using the iPod then recharging it, you are using it correctly. Although most of the following relates to notebooks, some of it is quite relevant to your iDevice.
About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
Determining Battery Cycle Count
Calibrating your computer's battery for best performance
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University

IPod Classic not syncing past say ~500 songs, -50, -69, -1404 etc.

OK So I have the Ipod Classic 120GB model. I've had issues with it before, mainly after the first time I accidentally took the iPod out when it wasn't done syncing. Anyway the 2 or 3 times my library got wiped I was able to get it back (process of finding which songs were causing the sync to fail and reformatting iPod)
Anyway, a few weeks ago I was trying to give my brother some of my songs and I had used a program for my older ipod (a 5G Ipod Video 30GB) I'd used successfully in the past to copy the library to my computer called CopyTrans or something like that.
I tried it with the 6G and it got halfway done then the iPod froze or just failed, my brother got no songs on his computer (running XP) and my iPod got wiped. I wasn't mad since I figured I'd just restore it (running iTunes 10 on Windows 7).
It's been about a month and I have not been able to get my whole library on my iPod. I've tried reformatting under every setting, numerous restores, trying different iPod USB cables (for some reason my older one with the side release buttons works better at times, the others sync to fast and just freeze and fail sometimes).
My iPod will begin syncing usually fine, until it gets around ~500 songs or gets to certain songs then it will display Connected and just sit there (on iTunes 8-9 the whole iTunes would just freeze) iTunes 10 seems to keep running and the iPod section just freezes and for not as long, it usually comes back within 3-4 min, but with error codes and not syncing everything I asked it too.
I've even tried unchecking and converting the songs that mess up (Create an MP3/AAC version) which seemed to be working at first but now is not and I have numerous copies of songs in my Lib.
Any help is appreciated? Should I take it to an Apple Store? Is there any other methods to try or is my HD pretty much shot.

*Check your iPod with Diagnostics Mode*
It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
tt2

Blue screen when re-opening iTunes 9.0.3 w/ iPod Classic already plugged in

I was wondering if anyone else has experienced this or something similar.
I have already reported this as a potential bug to Apple at http://www.apple.com/feedback/itunesapp.html
This is regarding iTunes 9.0.3.15 for Windows
Potential bug: Windows blue screen (SYSTEMSERVICEEXCEPTION) when re-opening iTunes with iPod Classic 120GB already plugged into USB port.
I have been able to replicate this problem twice now. Here are the exact steps:
1. Plug iPod Classic 120GB (bought new in November 2008) into a USB port and iTunes opens and syncs (I have it set to manually manage my iPod).
2. Use iTunes for a bit, then click the eject icon next to my iPod in iTunes (when it's not syncing) but leave iPod plugged into the USB port (to charge).
3. Close iTunes and use Internet Explorer for a few minutes and close Internet Explorer (with no other apps running).
4. Open iTunes. iTunes connects to iPod (iPod screen shows "Connected").
5. Scroll through the iTunes Music Library in List view, click any music file and a Windows Blue Screen appears (SYSTEMSERVICEEXCEPTION), does a memory dump and then forces the computer to restart.
So far, the blue screen only occurs under these specific circumstances. I do not know if this problem existed before iTunes 9.0.3.15 as I have never tried the above steps in earlier versions. I just happened to be able to retrace my steps to notice the blue screen problem in 9.0.3.15
This is the first time I have ever encountered a Windows Vista blue screen error in the year and half I have used Vista.
I am running Windows Vista SP1 64-bit on an HP Pavilion dv7-1014ca notebook.
Here is my iTunes diagnostics log (with some lines removed for privacy reasons):
*START ITUNES DIAGNOSTICS LOG*
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 1 (Build 6001)
Hewlett-Packard HP Pavilion dv7 Notebook PC
iTunes 9.0.3.15
QuickTime 7.6.5
FairPlay 1.6.16
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
Current user is not an administrator.
The current local date and time is 2010-02-01 22:42:01.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 9600M GT
_External Plug-ins Information_
No external plug-ins installed.
_Network Connectivity Tests_
Network Adapter Information
Adapter Name:
Description: Intel(R) WiFi Link 5100 AGN
Adapter Name:
Description: Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-02-01 22:40:52.
_iPod/iPhone Connectivity Tests_
iPodService 9.0.3.15 is currently running.
iTunesHelper 9.0.3.15 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
XXXX'S IPO (G:\), iPod classic running firmware version 2.0.1
Serial Number:
Bus Speed: 61440
*END ITUNES DIAGNOSTICS LOG*

I've gotten the exact same error message and problem... When I connect my iPod Nano 3Gen, iTunes comes up -- syncing begins -- and then immediately triggers a blue screen with the SystemServiceException error and a crash dump is generated. I have been unable to find a resolution in 3-4 weeks of searching, including HP Technical Support, trolling the Windows 7 Support sites, and now, here. The Advice given by HP was to uninstall all USB drivers and let reboot reinstall them. That didn't work. Then they asked me to reboot my PC, hit F10 until the BIOS came up, and then find and disable the "enable legacy USB" capability -- except that no such setting is available in my BIOS. Obviously it's a driver issue, and just as obviously it's a Windows 7 / iTunes issue -- but no one is offering a solution, yet.

IPod Classic - ok with Windows, not with iTunes

Hi,
I have a Classic 160GO iPod.
Suddenly this problem appeared :
- no music or pictures were recognized by my iPod, but the disk space was used for "Other"
- this iPod is not known with iTunes
- This iPod is known as a removable hard disk, via Windows 7 (Main computer), Windows XP (secondary computer), a linux thing (a friend computer).
1. I already checked this iPod with the diagnostics mode (see https://discussions.apple.com/message/19048752#19048752)
result is :
- reallocs : 0
- Pending sectors : 32
My understanding is that my iPod hard disk is ok and valid.
2. I followed most of the recommended way to repaird the iPod as per Support (8 out of 10)
NOthing is working.
I confirm I have installed the latest version of iTunes.
3. I read the following page : https://discussions.apple.com/message/19158071#19158071 to find the relevant firmware.
But the iPod Classic 160GO is not in the list.
My questions
--> Do you have an idea to solve my problem ?
--> What could happend i I format my iPod with windows ? It would be only a hard disk after, wouldn't it ?
--> I f I format, is there a solution to re-install the iPod software (= firmware ?)
Thank you for your help.

The iPod hardisk is looks new from the Reallocs and ON Hours, but, it is rebooting more to get the correct spin for data verification, causing tImeouts, so the Pending Sector will increase.
There maybe something, near the iPod environment, that is causing the drive to fail, and overheat, if it has not already been damaged, or maybe it is just one Hardisk, that slipped through poor quality control.
You can bring the Retract, Realloc and pending number low, by doing low level format, see this article, but your problem of Hardisk rebooting to find a good cluster, wont go away
Just my thoughts.
Magnets are the primary cause of hardisk crashes, I would also suspect, using your handphone, while it is near the iPod would also be bad, see the YouTube video on hardboiled eggs using handphone.

IPod Classic not recognized by iTunes, claims to be wiped of all content, and causes computer problems when connected

I have an 80 GB iPod Classic that has suddenly developed severe problems. I'm running iTunes on Windows 7 64 bit.
It was working fine until last night, when I connected it to iTunes to add 6 songs. (Four of these were bought on Amazon.com and 2 ripped from CD's). It accepted the songs and played them fine when connected. When I clicked the icon in iTunes to eject the iPod, it came up with the "OK to Disconnect" and progress bar as usual. However, this time the progress bar didn't start to fill in. It just sat there.
After several minutes the progress bar finally filled in and returned to the menu... but instead of displaying the cover flow on the right side as usual, it showed a gray box with "No Music."
When I tried to re-connect it to my computer, iTunes would not recognize it. My computer also wouldn't recognize it at first... after several minutes, it came up as a generic removable device. Attempting to right-click on it or eject it from Windows was unsuccessful.
The iPod itself displayed "Connected" and alternated the plug image with the spinning arrows. It never said "Synchronizing" as it usually does.
Furthermore, my computer's performance degraded severely while the iPod was plugged in. iTunes itself froze, and even my other applications (such as my web browser) would not work correctly. This all cleared up as soon as I unplugged the iPod. If I tried to initialize iTunes while the iPod was plugged in, it would not open. It opened immediately when I unplugged the iPod.
Finally, despite claiming to have no music or other contents (it had contained only my iTunes music library, which is about 26.5 GB), in Settings the iPod claimed to have only 5.3 GB of free space.
Resetting the iPod with Select/Menu made no change. I was able to put it in diagnostic mode and check the hard drive, which gave these results:
Retracts: 381
Reallocs: 0
Pending Sectors: 10
PowerOn Hours: 417
Smart/Stops: 381
Temp: Current 24c
Temp: Min 15c
Temp: Max 48c
When I put the iPod up to my ear I hear a steady, faint high-pitched sound and an occasional very faint crackling noise. When it shuts down the sound continues for a few seconds, then ends with a kind of squeaking sound.
The iPod is more than 5 years old, so I'm prepared for the probability that it's fried. But I'd like to try everything before I go ahead and spring for a new one.

The iPod's hard drive probably has data corruption. That does not necessarily mean there is a hardware problem. Hard drives, including the ones in computers, can develop data corruption.
Try putting the iPod into Disk Mode
http://support.apple.com/kb/ht1363
If it goes into Disk Mode, run iTunes on the computer and connect the iPod. To eliminate other potential issues, you should disconnect other USB devices (you can leave standard keyboard/mouse connected), and connect the iPod to a direct USB port on the computer.
iTunes may prompt you to do a Restore, which you should do. This will erase the iPod, re-install its software, and set it to default settings. If the problem was only data corruption, and there is no hardware problems, the iPod should have a "fresh start." You can sync it from your iTunes library.
If the iPod does not go into Disk Mode, or if doing a Restore fails, the iPod's hard drive may be faulty.

Increase Ipod Classic Speed Performance

Similar Messages

Maybe you are looking for