Increase number of rings before answer phone

Hi
Nokia 6500
How do you increase the number of rings before the call automatically goes to answerphone? I keep missing my calls.
It's a REALLY simple question I know, but I have searched the net and read the manual and can't find an answer.
Does anyone know if it can be done and how?
Many thanks in advance.
Lex

sallyald wrote:
sallyald wrote:
This has worked on other makes of phones but how do I get the ** on a nokia asha 210? Pressing ** does nothing but when a number is pressed the keypad appears.
doc3748 wrote:
hi
i had a real problem and found this answer on av forum which worked.i thought of sharing with you all as i too was being driven crazy by the number of missed calls as it would go on divert after only 5 seconds
for o2 it is **61*901*11*20#
where 901 is the voice mail no and 20 is the seconds delay you wish before divert kicks in.
it can be set as 5,10,15,20 or 30 .
hope this helps.
Hi,
Was having difficulty asking the phone function of the phone to type **. Not quite sure how this happened but I pressed the bottom left hand key with the arrow pointing north east, pressed the **, realeased buttons, pressed ** and the screeen showed **
Thanks.
Ooops, posted too soon. Al this does now is saves the command as a phone number

Similar Messages

Increase number of rings before pickup

How do I increase the number of rings before pickup on the iPhone4?

Apple needs to provide better advice to its iPhone customers on this issue -- there is nothing on this topic in the iPhone manual.
My iPhone 4S rings for 4 rings (about 10 seconds) before the call transfers to voicemail. I would like the time to be extended to about 15-20 seconds.
After spending more time than I would like to determining that the manual does not address this topic, and searching the internet, I called my wireless provider (Verizon), who said they extended the ring time on their switch, but it failed to register on my iPhone. The Verizon rep conferenced in an Apple rep, who said the iPhone could not be changed in this respect.
This is basic stuff -- even if it does involve some interaction between Apple and the wireless service provider. It is one of the first things I have attempted to modify on my phone (immediately after I programed in my voicemail). If the phone cannot be modified in this respect, Apple should say so in its manual, and not have everyone be forced to figure out how to try to fix this problem for themselves.

Increasing Number of Rings Before Voicemail Pickup

I can't figure out how to let it ring longer before going to voicemail on my 3G iPhone. Any thoughts? Thanks.

You would need to call ATT and request that they adjust the number of rings.

Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

Updating my iPhone 5 software has shortened the number of rings before the answer phone kicks in, how do I extend the time delay?

If the codes Tanzim mentioned don't work, just call your carrier and ask them to extend your time until voicemail picks up, to 30 seconds. They do this routinely.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to extend the number of rings before phone goes to answering machine?

On 5S, How to extend the number of rings before the message machine turns on?

Check with your carrier. It is not an iPhone controllable setting.

How to set the number of rings before voice mail answers?

How to set the number of rings before voice mail answers?

For me its:
1. Open the phone app and dial *#61# on the Keypad. Press the Call button.
2. Locate this text on the screen: "Setting Interrogation Succeeded, Voice Call Forwarding, When Unanswered, Forwards to +" and record the 11-digit number after the + symbol.
3. Touch the Dismiss button. Now enter this code on the Keypad: *61*+ followed by the 11-digit Forwards to number recorded in step 2, followed by *11 and *ringtime#. Ringtime is the number of seconds you want your iPhone to ring before voicemail picks up. Your finished code should look something like this:
*61*+18555513466*11*30#
In the example above the ring time is set to 30 seconds. Press the Call button.
4. You should receive the message: Setting Activation Succeeded. Press Dismiss and next time you receive a call it will ring for the new amount of time before going to voicemail.

Number of rings before going to answerphone

I have a Nokia 6300 and was wondering if there is any way to increase the number of rings before it goes to answerphone.
Many Thanks
Dartmoor48

Answered many times before.
For example:
/discussions/board/message?board.id=phones&thread.id=50285
/discussions/board/message?board.id=swupdate&thread.id=38895
/discussions/board/message?board.id=phones&thread.id=8734
These topics were found by running a uick search for voicemail timeout on this forum.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Increase number of ring

Hello,
I would like to ask, how do I increase a number of rings before it will jump to the next agent phone, im using spa 9000
Thanks

Hi there! I guess eepro is correct. I visited the article and it explained the syntax on how may times it will ring the extension numbers.Cheers!

Increase number of rings

How do I increase the number of rings before the call goes to voice mail My phone goes to https://www.assuranthealthsales.com/downloads/fhsdownload/30244-plus.pdf after 2 rings.

Call your carrier. It's controlled by them and is based on time, not number of rings.

How do you limit the number of rings before your answerphone kicks in?

People calling me have sometimes complained that if I am not available to take the call, they have to wait for many rings - and hence a long time - before the messaging system kicks in. And sometimes, callers give up, assuming I don't have voicemail. I know you can limit the number of rings on other phones, but I haven't founf out how to do it with my iPhone. I'm sure it's easy though!!

Your carrier sets this by time, not the number of "rings" since different ring tones take different times/ring. The typical setting is 30 seconds, sometimes up to 40 seconds. Contact your carrier to shorten it.

How do you set the number of rings before going to voice mail?

I can't find the option to shorten the number of rings before going to voice mail, any ideas?

It's preset by some phone software but you still may have some sound settings for the answer time. Go to settings and check under call answer settings.

3315 - Number of rings before diversion to voicema...

Is there any way of setting the number of rings before diversion to voicemail?
Currently my 3315 rings about 6 times and then diverts. This is too quick for me and I want to make it (say) 12 rings.
I cannot find anything on this function in the owner's guide.
Thanks!

I also received this belated but nicely detailed response from Nokia Support, so I'm posting it here for posterity:
In response to your enquiry, the extension of a ring time is a network related feature. Hence, network features are not listed in the phone's user guide.
You may contact your network provider to request for the ringing time to be extended to the maximum time (normally its 30 seconds).
If this has been done, you can check if the time delay has been set to the maximum time from the phone.
1) Menu>scroll to Call Divert and press select
2) Scroll to Divert if not answered and press Select
3) select Activate and press OK
4) select Voice mailbox number and press OK
At this point, if the call feature has been activated, you will be able to see step (5) as per below. Otherwise, contact your network provider to request them to activate the call divert service and repeat the steps.
5) Active:Voice Calls, press Details
6) scroll to Delay and press OK
7) You will be able to see the time in which the phone will ring before diverting the call to your voice mailbox.

Reduce number of rings before Voicemail

I would like to reduce the number of rings before my voicemail comes on on my Blackberry Z10. It is forwarded from my desk phone and that means that customers are waiting an excessive amount of time before my voicemail kicks in on my BB. I called my carrier (Rogers) and they said they were unable to do this. I'm not sure if their tech support was correct in this, as I've seen on other forums that this is the process by which you change the length of the ring tones.
Is there a way to reduce the number of rings before voicemail on my Blackberry Z10 in my settings?
Thanks

*61 *NNN NNN NNNN *11 *X#
Where X is ranges from 5 to 30 seconds before a call get forwarded to the voice mailbox
And NNN NNN NNNN is the VoiceMail number provided by the Carrier
You can locate the Carrier Voicemail Number in
Phone Settings/Call Forwarding/Forward If Buzy

How do I change the number of rings on my phone?

how do I change the number of rings on my phone?

Call your provider and ask them to do it.
This is not controlled from the iphone.

8330 Call Forwarding...How do I set the number of rings before calls are forwarded?

8330 Call Forwarding...How do I set the number of rings before calls are forwarded? Right now it instantly forwards my calls but I don't want that. I want to change it so that let's say that if after 5 rings I don't answer the call is forwarded. I've looked everywhere for an answer but have had no luck. Any help would be appreciated. I am with Virgin Mobile if this makes a difference.
Thank you
Message Edited by 8WDDdotcom on 08-01-2009 02:39 PM
Message Edited by 8WDDdotcom on 08-01-2009 02:44 PM

Well, call forwarding is a feature provided by your carrier -- it is not a function of the device. However it works for your carrier is how it works. Actually, from what I understand about call forwarding, it normally is an all-or-nothing circumstance...calls forward to the number you've asked them to be forwarded to, keeping you in a DND status. Regardless, though, if your carrier tells you how it works on their system, there's nothing that the device can do to override that. Unless there is some kind of 3rd party app that would do it, bypassing (somehow) the carrier network CF feature...but I've never heard of such a thing.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Increase number of rings before answer phone

Similar Messages

Maybe you are looking for