Increase Ram memory

Hello, Please advise that its possible to Increase my laptops RAM and How do I select the exact memory card if the RAM can be increased or provide the exact Memory card I can replace or increase the RAM with. RAM
Memory slots
Total memory slots 2
Used memory slots 1
Free memory slots 1
Memory
Type DDR3
Size 4096 MBytes
Channels # Single
DRAM Frequency 665.1 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (tRP) 9 clocks
Cycle Time (tRAS) 24 clocks
Command Rate (CR) 1T
Physical Memory
Memory Usage 45 %
Total Physical 3.95 GB
Available Physical 2.17 GB
Total Virtual 9.81 GB
Available Virtual 7.34 GB
SPD
Number Of SPD Modules 1
Slot #1 Motherboard
Manufacturer Hewlett-Packard
Model 17FD (CPU1)
Version 0593110000204610000620100
Chipset Vendor Intel
Chipset Model Sandy Bridge
Chipset Revision 09
Southbridge Vendor Intel
Southbridge Model HM65
Southbridge Revision 05
BIOS
Brand Hewlett-Packard
Version F.1C
Date 1/23/2013
PCI Data
Slot PCI-E x16
Slot Type PCI-E x16
Slot Usage In Use
Data lanes x16
Slot Designation J5C1
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 0
Slot PCI-E x4
Slot Type PCI-E x4
Slot Usage In Use
Data lanes x4
Slot Designation J6C1
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 1
Slot PCI-E x1
Slot Type PCI-E x1
Slot Usage In Use
Data lanes x1
Slot Designation J6C2
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 2
Slot PCI-E x1
Slot Type PCI-E x1
Slot Usage In Use
Data lanes x1
Slot Designation J6D2
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 3
Slot PCI-E x1
Slot Type PCI-E x1
Slot Usage In Use
Data lanes x1
Slot Designation J7C1
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 4
Slot PCI-E x1
Slot Type PCI-E x1
Slot Usage In Use
Data lanes x1
Slot Designation J7D2
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 5
Slot PCI-E x16
Slot Type PCI-E x16
Slot Usage In Use
Data lanes x16
Slot Designation J8C2
Characteristics 3.3V, Shared, PME, Hot Plug
Slot Number 6 Operating System
Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i3 2330M @ 2.20GHz 53 °C
Sandy Bridge 32nm Technology
RAM
4.00GB Single-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard
Hewlett-Packard 17FD (CPU1) 54 °C
Graphics
Generic PnP Monitor (1680x1050@60Hz)
P224W (1680x1050@60Hz)
Intel HD Graphics Family (HP)
1024MB ATI Radeon HD 6490M (HP)
Storage
698GB Western Digital WDC WD7500BPVT-60HXZT3 (SATA) 38 °C
3GB USB Device (USB)
Optical Drives
hp CDDVDW TS-L633R
Audio
IDT High Definition Audio CODEC

Hi, All information you need: RAM
Memory slots
Total memory slots 2
Used memory slots 1
Free memory slots 1
Memory
Type DDR3
Size 4096 MBytes
Channels # Single
DRAM Frequency 665.1 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (tRP) 9 clocks
Cycle Time (tRAS) 24 clocks
Command Rate (CR) 1T It currently has 4GB in one slot. You can simply buy 1 more 4GB stick using information in bold and install on slot #2 Regards.

Similar Messages

Extending RAM Memory/ increasing temperarture

Hello,
on behalf of extending RAM memory, my iBook G4 (1,42Ghz 14,1" 512MB) manual provides using PC2100 DDR 266 rather than PC2400 DDR 333 modules.
As I was told these RAM modules are quite old I bought a
PC2700U DDR 333 and put it in. My question is whether I can do it this way.
The iBook recognizes this module but I have the feeling that the notebook is getting really warm or even hot while operating..
Thank you for your suggestions,
Artjom

It is only your imagination. The PC2700 is actually operating at PC2100 speeds. Therefore it is creating no greater heat than install PC2100 RAM.
Furthermore, since OS X has more RAM to work with the hard drive is probably having to do less work and your iBook is operating a little cooler overall.

I want to increase my ram memory how do I know which one to buy

This are all the details on my computer. I need to buy more memory, im not sure whats the maximum on RAM memory neither where or which to buy.
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i5
Processor Speed:          2.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.68f99
Serial Number (system):          C1*******V13
Hardware UUID:
Sudden Motion Sensor:
State:          Enabled
<Edited by Host>

You have a Late 2011 MacBook Pro 13". Make sure the RAM you buy says it is compatible with that age of MacBook Pro and screen size, and has a lifetime warranty.   http://www.crucial.com/ and http://www.macsales.com/ both offer worldwide high quality RAM. Do not buy ValueRAM. Do not post your serial number again. The Model Identifier is sufficient to tell us which model you have.

How to increase the memory for my weblogic server in Jdeveloper 12.1.2.0.0 ?

Hey everyone,
So as my title says, i'm trying to increase the memory for my weblogic server in my windows 7 64 bit machine, with 8GB ram.
The values appear to be: JAVA Memory arguments: -Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m
I've done some search from this forum and i've added this to my jdev.conf:
AddVMOption -XX:MaxPermSize=1536M (in this one i've only changed the value)
AddVMOption -Xmx1536M
AddVMOption -Xms1536M
And i've changed this: MEM_ARGS="-Xms1024m -Xmx1024m" in my startNodeManager.sh file
I'm still getting the same line in my server but i need to change the values since i'm not getting the server to run my application very well (it gets stucked in loading my databases and graphs) and i think it will continue untill i get a heap exception error.
Any ideas of how to change this?
Regards,
Frederico.

Thanks Alejandro .
I'm going to ask you another question and this one is quite important.
Whenever i run my project a couple of times, i'm not able to retrieve the page, it just gets stuck on loading.
It just stops the loading, like its a really really slow page. I'm not using a lot of rows in my database so i don't take to much memory but it doesn't load and i know everything is fine but i just added some graphs after testing it.
Do you know why?
In the console it says that everything is fine and shows the link for the page but it never loads completely until it gives a error because it does not respond in 600 seconds.
Strange right?

Is there a way of Apple increasing my memory and processors?

Is there a way of Apple increasing my memory and processors so that my 2010 MacBook will run faster? I use 3D programs and filmmaking editing software, and my laptop, as awesome as it is, can't quite keep up with what I do. The programs I am using:
Blender (Open source 3D software)
Final Cut Express
iMovie '09 (usually editing off an external hard drive)
I make most of my films in HD too.
I heard that you can manually replace the RAM and stuff, but Im not too keen on it. Being me, I might brake something. But does anyone know of a safe and secure place to buy extra RAM and memory and processors for a 2010 MacBook.

The only way to upgrade processors is to buy a new Mac. In your case a MacBook Pro would be more appropriate for the tasks you're undertaking.
Your MacBook will only take a maximum of 4GB RAM.
In addition to etresoft's recommendation, Crucial Memory is reliable and equally good service. I think this is the RAM for your model, but to be on the safe side, use the "scan my system" option to getthe exact match.
http://www.crucial.com/store/listparts.aspx?model=MacBook%202.4GHz%20Intel%20Cor e%202%20Duo%20%2813-inch%20White%29&Cat=RAM
Message was edited by: noondaywitch

I've not found the option to increase shared memory of intel hd graphics card in BIOS

Hi! I don't find that option. I have the 2.08 version, but the 3.01 is out there. The graphics performance is not very well now. Is there a way to increase this memory to 256 mb or more? Thanks in advance

hi freinn,
Welcome to Lenovo Community Forums!
This is on Auto by default.
The amount of memory shared to your graphics is dependent on how much RAM you have. Also even if you max out the RAM capacity there will no big jump on the shared memory just few MBs will be added
The Manual is not available even if there is an updated BIOS.
Even if a Manual option is available still you can only share the same maximum as the one on Auto. Not a big jump.
i hate to say it but that's how it will be
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

N8 - Ram memory

Ive got a problem with the Ram Memory on my Nokia N8.
When i switch the phone on i have 115mb free and 131 used, this is fine and the phone works quite quickly.
However over the next few days i lose about 20 to 25mb a day resulting in less than 50mb free after only a few days which makes the phone very slow and not responsive.
I use the phone for the same things every day, calls, texts, emails, playing videos / music, taking photos and a bit of internet surfing. After closing an app the free memory goes back up but obviously something is happening to use the memory and not give it back!!!!
Id like to know what is using this memory and is there anything i can do to stop it other than switching the phone off and back on every day??
I have no such problems with my 808 so im well confused as to what is happening!

Perhaps it is Anna. It is always recommended that one updates to the latest version of firmware, as it brings reliability, performance and functional improvements. Belle and Belle Refresh greatly increase the performance and stability of the phone and make it much prettier. I'm sure that if you update, the RAM problem will go away.
But the downside to firmware updates, as you have also stated,is that some of your old apps may not work, as compatibility is not guaranteed. In these cases, you will need to contact the app developer themselves to ascertain the status of the app and its compatibility.
In conclusion, the choice is up to you. I have Belle Refresh on my N8, and i'd take that any day over losing compatibility with some apps.

Increasing video memory from the A40-211

Hello all,
I've got the Satellite A40-211. The Intel chipset also takes care for all the graphic stuff, so it needs a little bit RAM memory as video memory. This is possible up to a maximum of 64MB. The problem is that the chipset now uses a maximum of 16mb as video memory, but I want to increase this to 64MB.
Where can I find the settings for this in Windows Xp Home?
Thanks for all the help!
Bart

Hi, its not possible to increase the video memory yourself !
Let me say that your Notebook has an dynamic Memory Management
Your Computer System reserved only so much Graphic Memory as he needs, to accomplish all tasks running on your A40.
...this Dynamic Video Sharing is not bad, as I think !
More Infos about your Graphic Chip youll find on the pages of Intel.
nice evening...

How to increase the memory of oracle

Hi,
I am having oracle database version 11.0.1.6 on windows server 2003 R2.
My Server Ram size is 12 GB.
select * from V$SGAINFO;
Fixed SGA Size     1335136     No
Redo Buffers     12529664     No
Buffer Cache Size     1073741824     Yes
Shared Pool Size     176160768     Yes
Large Pool Size     8388608     Yes
Java Pool Size     16777216     Yes
Streams Pool Size     8388608     Yes
Shared IO Pool Size     0     Yes
Granule Size     8388608     No
Maximum SGA Size     1297321984     No
Startup overhead in Shared Pool     58720256     No
Free SGA Memory Available     0
I want to increase my memory for oracle because i need to insert 31 billion rows into a table with nologging. I am inserting them chunk by chunk and commit after each chunk. But it is taking 62 hours to insert the rows. So i think if i increase the memory i could reduce the time to insert the rows.
I really am not sure whether i am thinking in the right way. Please advise. If i want to increase the memory please let me know how to increase it.
Thanks in advance

Are all columns in the WHERE clause indexed?
Are statistics current & accurate for all tables & indexes?
post EXPLAIN PLAN for SQL below
PROCEDURE Pro_unpvt_usm_dr
IS
BEGIN
    FOR k IN (SELECT DISTINCT pr_id
              FROM   unpvt_im_dr_e0322) LOOP
        INSERT /*+ append */ INTO unpvt_usm_dr_e0322
        SELECT pr_id,
               nr,
               col,
               Corr(n, m) val
        FROM   (SELECT a.pr_id,
                       a.nr,
                       b.nr col,
                       a.n,
                       b.val m
                FROM   unpvt_usm_drpre1_e0322 a,
                       unpvt_im_dr_e0322 b
                WHERE a.pr_id = k.pr_id
                       AND b.pr_id = k.pr_id
                       AND a.col = b.col)
        GROUP BY pr_id,
                  nr,
                  col;
        COMMIT;
    END LOOP;
    dbms_output.Put_line('POPULATED UNPVT_USM_DR_E0322');
END pro_unpvt_usm_dr;

Increased RAM size

Hi all,
i have increased RAM size to 32 GB in our production server. currently we have 40 GB of SWAP. now i want know how to distribute the RAM size to database , SAP and operating system. please let me know the parameters for increase.
Operating system : SuSE 10 SP2
Database : oracle 10.2.0.2
SAP : SAP ECC 6.0 SR2 (ABAP stack only)
ztta/roll_area        6500000
ztta/roll_first       1
ztta/short_area       4000000
rdisp/ROLL_SHM        32768
rdisp/PG_SHM          32768
rdisp/PG_LOCAL        150
em/initial_size_MB    5120
em/blocksize_KB       4096
em/address_space_MB   4096
ztta/roll_extension   2000000000
abap/heap_area_dia    2000000000
abap/heap_area_nondia 2000000000
abap/heap_area_total 2000000000
abap/heaplimit        40000000
abap/use_paging       0
please give you valuable suggestions and whether it is required to increase the swap size
regards
Ramesh
Edited by: Ramesh Sammiti on Oct 26, 2009 10:54 AM

As this is production system, you better go with SAP's recommendations.
You do Zero memory (Default memory parameters) open an OSS message and probably
you can do quick sizer modeling also.
service.sap.com/quicksizer
All the best,
Nagaraju

Can i increase ram of my macbook air 2012 11".

can i increase ram of my macbook air 2012 11". I purchased it from apple premium reseller in neighbouring city, they didn't tell me there is a 8 gb model also otherwise i could purchase it. so does these apple store provide changing something in my model as the ram is solded out ? i cant purchase a new mac so early coz my book hasent completed a year !
my problem is that, OS X Mountain Lion takes 2 gb memory.
If i run safari, i watch youtube, load multiple tabs about 5-6 ( facebook twitter youtube yahooanswers google-ing ) at same time ( one by one but i keep it open ) this takes atleast 700 mb ram
and mail runs at startup and i need it it takes 100 - 150 mb ram
some ram goes in active-inactive-wired i mean if i dont know but some background processes may be in it ..
and if i load iphoto or transfer files from HD to Ex-HD, i feel it is getting slower.
if i just open photoshop. a message comes to quit some apps. ***,
i never keep lot processing like video converting or dont use final cut pro like apps.
i dont have problem with processor, its 1.7 dual core i5. i feel its fast enough for my work.
but i need upgrade from 4gb to 8 gb. please give some advice
thanks for reading and double thanks in advance for answering ! plez help

Your only option is to sell the one that you have and buy a new one with 8 GB of RAM.

Dashboard using too much ram memory

Whenever I use the dashboard, after a couple of minutes it starts consuming more than 1GB of RAM memory, so that it doesn't let me work. I have to force quit the Dashboard... The mac is almost new. Any solution?

I have tried to analize better what happens. In the dashboard I only have a calendar, a calculator, a clock and one postit (but there is nothing writen on it). If I use something in the dashboard, for example, the calculator, and I do some multiplications, after a couple of minutes the use of memory of the dashboard starts to increase. I closed any other program and in some minutes I have sen how it increased until I stopped the process when it was using more than 2GB! (you can see it in the picture). It's very strange! (Thank you very much for your help!)

I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?

I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?

The RAM in the retina model can not be upgraded.

How to increase virtual memory 10.5.8 imac?

I have 180 GB free on the hard disk.
Processes: 107 total, 2 running, 2 stuck, 103 sleeping... 430 threads                                                      16:31:59
Load Avg: 0.48, 0.51, 0.55    CPU usage: 7.36% user, 14.34% sys, 78.29% idle
SharedLibs: num =   12, resident =   37M code, 768K data, 3320K linkedit.
MemRegions: num = 62876, resident = 444M +   14M private, 158M shared.
PhysMem: 195M wired, 522M active, 117M inactive, 835M used, 189M free.
VM: 12G + 389M   5668464(2) pageins, 3301833(0) pageouts
thanks

I remember increasing virtual memory with my Power Machintosh 6500; just to play The Sims! Before Apple killed Mac OS 9, virtual memory modification used to be a feature. So now I guess they either feel we have enough RAM or they have provided dynamic vRAM.
You may be able to test the fact Niel provided, by punching in this line of code in terminal, when you've maxed out your RAM:
sysctl vm.swapusage

What type of RAM memory does my Presario 2417 LA notebook admits

I need to increase the RAM memory of my Presario 2417 LA notebook

Hi:
Is the notebook at the link below what you have?
http://h10025.www1.hp.com/ewfrf/wc/product?product=1129156&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
If so, maximum memory is 2 x 1 GB of PC2700 memory, which is listed to the right of the Memory Max line on the above link.
Paul

Increase Ram memory

Similar Messages

Maybe you are looking for