Increase RAM usage

In the pref file ti states that: "Note: After Effects will not use more that 2GB of RAM... See After Effects Help for information about enabling this option."
I have 4 GB ram. I have searched AE Help, Microsoft, adobe and Google, ..,. for 3 hours now. I cannot find out HOW to do this. Everyone talks about it but no one tells HOW.
I really would appreciate it if someone, anyone would be kind enough to give me a hint as to where I might fine information on HOW to do it. It is so frustrating that Adobe help files does not tell you how to find anything or use the search terms in stating that you can find something. It sure would make it easier to use their programs if they stated how. But maybe it is just that I am not a tech guru, only a lowly user.
Thank you,
Clif

I used the title of your forum post as a search query and the first search result was for the page in Help that has the information that you're looking for:
Community Help search for 'increase RAM usage'
On the
"Memory usage and storage" page, there's a link to Jonas's site for instructions for Windows XP, and there's a comment from Justin Buser that contains detailed instructions for Vista.
Please tell us what terms and methods you were using in your search so that we can make this information easier to find for people who are searching in the same way that you were.
Were you using the
Community Help search
, as recommended in the banner at the top of this forum?

Similar Messages

Limiting OS RAM usage

I am looking for some tips or best practices to get the most efficient use out of my RAM, particularly when it comes to the OS. I have a Latitude E6530 with 16GB of RAM. I started out with 4, then went to 8GB, then to 16. I run the same number of programs
in my daily routine, yet it seems that the more RAM I install, the more the OS gobbles it up. Since I run the same programs daily, I would not expect RAM usage to fluctuate very much and expect these apps to consume about the same daily. It seems like the
only thing that can be consuming more RAM is the OS. When I was at 4gb, I hovered around 70-80% RAM utilization, went to 8GB, same results, now at 16GB, and almost hitting that number again. I understand the OS needs a certain amount of RAM to operate, so
is there a way for me to limit what the OS takes so I can have more for programs that may need it? Will the OS "give some back" if needed to extra programs I may decide to run when I am at a high utilization mark? What I don't want to get into
though is a constant swap condition, especially with core OS components that need to stay in RAM. Whats the best way to go about this?

it will be better if you start from "general" about RAM management
http://windows.microsoft.com/en-us/windows/optimize-windows-better-performance#optimize-windows-better-performance=windows-7
actually its not only based on how much RAM that you are using, but how you prevent another program or HW attached (even external graphic card or LAN card) used windows service that maybe will increase RAM usage.
You can start using Windows performance tools to investigate
http://technet.microsoft.com/en-us/library/cc749249.aspx
try to compare different condition like, a few program running during start up (clecan boot), disable security software, no other 3rd party HW attached, no internet connection, upgrade latest driver for all HW or else
my opinion, Windows will only using RAM that needed to run start up, increasing RAM usage for windows process depend on the software running and HW attached
for more details and complicated process :) , you can read and implement this with your development environment
http://msdn.microsoft.com/en-us/magazine/cc163437.aspx

Ever increaing RAM usage of flashPlayer not shown in memory profiler of FlashBuilder

I have a flash application created with Flex in FlashBuilder which uses the Stage3D-API (Away3D-Library is used).
In this flash application 3D-objects are created and added to scene and they are also removed/disposed again, and then they are created/added again.
Performing these scene altering operations the RAM usage of the flashPlayer process (monitored in Windows7-Taskmanager) steadily increases by big amounts (lets say 20MB).
On the other hand the Memory-profiler does not show any such increases at all. Regarding to memory profiler the application still uses bascially the same amount of memory (the line stays flat).
There are some objects marked as loitering, but they donet seem to build-up. And their total amount is (if at all) 0,3MB.
After a while of 3d-scene altering operations (adding, removeing objects) the application/flash-player crashes, most possibly to not being able to allocate more RAM (Taskmanager shows RAM almost completely used up by flashPlayer-process). The application does not exit due to 3d-resource related limits like vertex-buffers, but here are now my questions:
Questions:
a) Are there areas of RAM-usages a (stage-3d) application uses up, which can not be profiled by FlashBuilder?
For exmaple: Is it possible that some objects (maybe stage-3d related) that hold onto some areas of memory/RAM which do not show up in memory profiler?
c) Is the versioning of used components (flashPlayer, FlashBuilder or used Flex-SDK) in an way relevant when memory profiling an application? It it possible that i dont properly see the used memory by my application because i might have old version of involved components?
d) Do you have any other idea what might be the cause here for increased RAM-usage or why it does not show up in memory profiler? I mean at least i expected to see it in memory profiler.
e) Generally i understand that the flashPlayer allocates RAM as it sees fit, and that its not the same amount of memory my application currently uses. But if my application seems not to use/demand any more memory (at least thats what the profiler tells me) i dont understand why flashPlayer allocates more and more memory - even to the point of crashing. Any ideas here?

Long shot but...
When I had an issue with Flash Builder 4.6 PC mobile in regards to the java heap problem I discovered myself that my project had content which apparently blew out the FB threshold. In particular my mp3 files (3 units) were of too much high quality (360 kbps), I had to scale down the files to 128 kbps. This is an extreme shame.
I am currently running these threshold tests to see if my mp3s can be of better kbps. I did hack my CONFIG scripts in the sdk folders in the installation location but that did not solve my issue. LESSON LEARNED: FB apparently employs the web logic where reduced files equal better performance.

RAM usage increases with time, problem?

Hi all,
Whislt I've been playing with linux on the side for a few years the past few weeks have been my first foray into using linux as my main OS, in the form of Arch. It's been a steep learning curve but I'm enjoying the experience and wealth of information. Previous flirts with Linux have been groping in the dark, pasting code from the internet and avoiding the terminal where possible.
Since going Arch full time I've noticed the RAM usage seems to increase when I leave it alone for a few hours. I'm running an old, around 2005 I think, Advent Laptop with 512MB, or 466MB according to free -m, RAM. I've allocated 2GB to swap which it dips into occasionally.
Typically I've been leaving open luakit & urxvt whislt running Awesome. If I leave it for a few hours and return the RAM has jumped from 30% or so to 80 or 90%. A reboot solves this.
I had a look around the interwebs but this is the first time my wed-fu has not unearthed one of those wonderful arch articles/post on what to do.
Any suggestions, or anything I can do to clarify the issue?

It does indeed, but only while the system is being actively accessed, as far as I know. An idle system (i.e. with no filesystem access) will have a stagnant file cache.
So I guess the question here would be, is your PC idle while you're "leaving" it? Do you use it as a fileserver, webserver, database, etc, or do you ssh in perform various tasks? Does 'free' report your free '-/+ buffers/cache' value as something minute?

Does installing Desktop Experience on Windows Server 2008 R2 SP1 slow down the server / increase processor usage?

Hello.
I'm running a tekkit classic (Minecraft) Server on a dedicated server I got from OVH, Im just wondering - Im currently using ClamAV for an antivirus, But I would like windows defender.
Im wondering if installing Desktop Experience on my dedi would increase processor usage or slow down the dedi even slightly.
System Specs:
RAM: 32GB DDR3 ECC 1600MHz
CPU: Intel Xeon E3-1245v2
HDD: 2x2TB SATA (Both used, specified as different drives)
OS: Windows Server 2008 R2 SP1
Theres only 1 indev tekkit server currently running on there, Im getting 0-5% processor usage. I may be setting up more modpack servers - but im wondering if installing desktop experience would increase the processor usage or slow the dedi down.
Thanks.
Joseph

Hi Joseph,
This is the forum for Microsoft BizTalk Server, you've asked your question in the wrong forum.
I suggest posting your question in the Windows Server forum
http://social.msdn.microsoft.com/Forums/en-US/home#forum=winserver2008appcompatabilityandcertification&filter=alltypes&sort=lastpostdesc&content=Search
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu

Shocking - OBIEE 11.1.1.5 Ram Usage

Hi Experts,
I have installed OBIEE 11.1.1.5 on Windows server 2008 R2 having 4GB RAM and i3 3.0 GHZ Intel Processor on 64 bit machine , and it uses physical memory upto 96% most of the time when my all services are up..
please suggest is ther some problem or shall i increase my RAM or is ther any way to reduced the RAM usage..
Cheers
Ankit

Ankit,
This is normal behaviour by 11g on your configuration. 4Gb is the minimum requirement. To make it more efficient, get your RAM sized increased and you will see the difference.
Hope this is useful..

Adobe Captivate crashing / RAM Usage

I've noticed that Adobe Captivate seems to consistently crash on my system when my system has reached a certain amount of RAM usage. (For me it's around 2.2GB, and I have a total of 3GB.) While in Captivate, my RAM usage increases significantly when playing slides in the viewer, and moving the playhead back and forth. It barely increases at all when doing anything else in Captivate.
Why does this happen and how can I fix it?
Also, after a while of being in the same project, when I try to record new slides, Captivate crashes without reason, and what I have to do is go into an earlier version of the same project, and capture slides in that project, where it works fine.

Hi,
I suspect it might be due to process Virtual Memory exhaustion. Can you do the following steps to verify it.
Download & install "Process Explorer" (PE) from microsoft's website. Now when captivate crashes and when the crash dialog box comes, start process explorer and see the "Virtual Size" for AdobeCaptivate.exe.
If the "Virtual size" column does not come by default in PE then make it visible by selecting "View -> Select Columns -> "Process Memory" tab -> "Virtual Memory" checkbox" .
Let me know what is the virtual size when Captivate crashes.
Regards
Rahul

[T410i] RAM usage, hight temperature, battery

Hi all, in this pc I've got two OSs. Ubuntu 12.04 and windows 7. With the fist I haven't got any problems, the RAM (3GB) usage is usually around 33%, but always under 50%. The temperatures are high, but it is quite normal, maybe the termal paste has low power to cold down them.
The problems arrive with windows 7. I disabled a lot of startup application, but after the boot, RAM usage is already over 50%. With Avira-realtime, after 2 minutes the percentage was over 80%. I disabled it.
Mozilla used a lot of memory too, now I'm just writing this post with chrome and nothing else, and the RAM usage is at 72%.
The CPU temperatures are always over 48°C (Here in Italy it is summer) but with ubuntu are less.
These problems are increased with battery, It is impossible to use the pc. I did a scan with malwarebytes (in safe mode) and everything seemed ok. How can I solve at least the RAM problem in win 7?
Regards

peets wrote:If you have a lot of memory, why not make use of it? I'm assuming this is a home/desktop computer. It's nice to have features like caching of web pages, music, etc. or fancy 3D effects, if it doesn't slow down your regular use. I use up lots of RAM to speed up my daily computer use.
256 MB of ram. I too enjoy a featurefull desktop, but speed is equally imperative. e17 gives you something of both worlds.
quick question. It seems the only thing I really need from my xorg.conf is the keyboard configuration as it figures out the rest pretty well without a configuration file. Could I delete everything else from xorg.conf and have it autoconfigure the rest?

Extreme ram usage leading to slow browsing experience.

Hello
I have been using firefox for a long time. this problem has persisted but it was not much of a problem then as it is now. The problem is as follows:
I have two windows open. one window has 30 tabs open and the other has 12 tabs open. The problem is that even if i do not use any of those windows, you can observe the ram usage, in task manager, it is consistently increasing. When this usage reaches 2800mbs, the browser starts to get slow and as it reaches 3200mbs, the browser is literally freezing for like 20 seconds by saying "Not responding" and then coming back to life and then after a few page change again it happens. this is really annoying.
In order to solve this issue i have to force close the browser and reopen it and restore the previous session to get my pages back and make them work at a decent speed.
My friends who use google chrome, they have even more tabs open and their browsing experience is quite smooth. I personally like firefox more as i am used to it and also its add ons are good, but this problem is really annoying.
Just to let you know if you start to think that my laptop cannot handle this load
My laptop specs are:
Core i7 2670qm
13gb ddr3 ram
1tb hdd
nvidia gtx560m 2gb
Kindly look into this matter and let me know if there is a fix to this issue.
Hope to hear from you soon.
Thank You

Did you check your extensions?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

As soon as Firefox opens, it starts increasing memory usage until it maxes out, and it won't actually close unless I end the process in the task manager.

Even if I'm not doing anything, no matter how few tabs I have open, Firefox will slowly increase in memory (RAM) usage until it's using nearly 100% of my computer's RAM, and everything basically freezes. Even when I close the window, the process continues to run, and I have to end the process in the task manager in order to get it to stop using RAM. I've tried disabling all my add-ons, and that does not help.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Scratch disks and RAM usage

i would like to understand the relationship between scratch disks and RAM usage in Photoshop.
While i was working on a fairly big psb file (2gb), photoshop kept prompting that I was out of memory, but in fact the utilization was only 75% (i had 16gbs total, photoshop was only using 7gb, and i allowed PS to use up to 14gb in total). when it says out of memory, it was actually my scratch disk at fault ( i only set 1 scratch disk, which was my 120gb SSD running out of space).
any idea how I can optimize PS to use up all my RAM first before even touching my scratch disk? (short of using a RAMdisk, please).
thanks!

I am curious about this also. I just reinstalled W-7--have 11 G of physical memory--a ton of hard drive empty space also, and I have been wondering why PS_CC is so slow--since basically I have only put my Security and Browser in addition to Adobe back on the Dell XPS computer..... At least now it does show the downloading percentage (like .psd file) , but that must be what is happening. I do think that some of these "frozen" screens I have been experiencing, was because the program was using scratch disk, instead of the Ram... I came up from CS-5, and can't describe it in detail, but just realize how slow PS-CC is in most everything. Going back and see if reallocating will help...

Where to see CPU and RAM usage in IPAD 1

Hi:-)
While i have Apps running , I would like to be able to see CPU and RAM in use..and ideas how/where?
Thanks

There are several apps in the app store that can show you cpu and ram usage of your device, e.g. "system info"

High RAM usage when system is 'idle' (EtreCheck)

Hey guys,
First timer here. Ok here's my question :
I recently bought a secondhand Macbook pro 15 inch. For me it's a huge upgrade coming from a 2009 13 inch Macbook pro. Because a friend of mine wants to buy my old one I was doing some diagnostics on the 13 inch, which has 4 GB of RAM, and found out it had a lot of inactive RAM usage and wired usage, almost 2 GB, due to a lot of launchdaemons etc which were hogging the RAM. I used terminal to kill these agents and deamons and now that system is running smooth again. Maybe it's wise to mention that the 13 inch runs on ML.
3 days ago I did a clean Yosemite install on the 15 inch, swapped the HDD for a SSD. And already the activity monitor shows a whopping 4,28 GB of RAM usage while I'm typing this with just safari open. I thought I could do the same trick as I did with my 13 inch but it didn't help, had some java deamons and helpers and deleted those. In terminal I looked up everything via launchctl list and there's nothing unusual going on as far as I can see. I had VirtualBox for one day but uninstalled it using their uninstaller. I have no clue what's eating all this RAM. Please help me out so I can be a proud owner of my second macbook for atleast 5 years to come. Thanks in advance.
EtreCheck version: 2.1.8 (121)
Report generated 15 februari 2015 08:45:30 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
 MacBook Pro - model: MacBookPro9,1
 1 2.6 GHz Intel Core i7 CPU: 4-core
 8 GB RAM Upgradeable
 BANK 0/DIMM0
 4 GB DDR3 1600 MHz ok
 BANK 1/DIMM0
 4 GB DDR3 1600 MHz ok
 Bluetooth: Good - Handoff/Airdrop2 supported
 Wireless: en1: 802.11 a/b/g/n
 Battery Health: Normal - Cycle count 685
Video Information: ℹ️
 Intel HD Graphics 4000
 Color LCD 1680 x 1050
 NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
 OS X 10.10.2 (14C109) - Time since boot: 0:52:24
Disk Information: ℹ️
 Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk1) / : 498.88 GB (457.96 GB free)
 Core Storage: disk0s2 499.25 GB Online
 HL-DT-ST DVDRW GS31N
USB Information: ℹ️
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Computer, Inc. IR Receiver
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Inc. BRCM20702 Hub
 Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
 Iomega eGo HDD 800mbit - 800mbit max
 disk2s1 (disk2s1) <not mounted> : 32 KB
 disk2s2 (disk2s2) <not mounted> : 29 KB
 disk2s3 (disk2s3) <not mounted> : 29 KB
 disk2s4 (disk2s4) <not mounted> : 29 KB
 disk2s5 (disk2s5) <not mounted> : 29 KB
 disk2s6 (disk2s6) <not mounted> : 262 KB
 disk2s7 (disk2s7) <not mounted> : 262 KB
 disk2s8 (disk2s8) <not mounted> : 262 KB
 Iomega_HDD (disk2s10) /Volumes/Iomega_HDD : 319.94 GB (30.10 GB free)
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Launch Agents: ℹ️
 [unknown] com.oracle.java.Java-Updater 06.40.36.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [unknown] com.oracle.java.Helper-Tool 07.05.30.plist [Click for support]
User Login Items: ℹ️
 iTunesHelper Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
 FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
 Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 JavaAppletPlugin: Version: Java 8 Update 31 Check version
 Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
 Flash Player [Click for support]
 Java [Click for support]
Time Machine: ℹ️
 Time Machine not configured!
Top Processes by CPU: ℹ️
 4% WindowServer
 1% fontd
 0% sysmond
 0% AppleSpell
 0% notifyd
Top Processes by Memory: ℹ️
 198 MB com.apple.WebKit.WebContent
 172 MB Safari
 94 MB mds_stores
 86 MB WindowServer
 43 MB Dock
Virtual Memory Information: ℹ️
 4.07 GB Free RAM
 2.79 GB Active RAM
 816 MB Inactive RAM
 904 MB Wired RAM
 1.25 GB Page-ins
 0 B Page-outs
Diagnostics Information: ℹ️
 Feb 15, 2015, 07:53:01 AM Self test - passed
 Feb 12, 2015, 09:53:18 AM /Users/[redacted]/Library/Logs/DiagnosticReports/Live_2015-02-12-095318_[redact ed].crash

This machine has not run out of RAM.
Virtual Memory Information: ℹ️
 4.07 GB Free RAM
 2.79 GB Active RAM
 816 MB Inactive RAM
 904 MB Wired RAM
 1.25 GB Page-ins
 0 B Page-outs
The page outs indicate the OS has not recently swapped any memory to disk.
Apple made changes to 10.9 that are the same on 10.10. Memory will be used as much as possible. It is the fastest storage on the system, keeping it free is a waste of your time - data loads fastest from RAM.
This is a good explanation…
http://arstechnica.com/apple/2013/10/os-x-10-9/17/#compressed-memory
The system also frees 'cache' memory when another process has more need to use it. Eventually it will swap to disk (which is slow) so the OS also compresses memory before swapping is needed.
Please avoid killing launchd jobs, many will simply restart or relaunch again later. Eventually you may kill one that hangs the OS & corrupts the disk via a forced shutdown.
I do suspect you may see issues when RAM does get low, but there is no evidence of that here. The memory pressure graph will show red when swapping - every other colour is fine. Wait until you see red & then note the top memory users.
If you don't want java installed you need to find removal instructions & get it all off the system, simply stopping the update checks will leave Java in an old state - terrible for security.
Also do you know what 'Live' is? It crashed recently, if it keeps doing that it may be worth a look, however it may just be one if the things that was effects by the killing spree

Why does closing all open windows (15) and leaving only one drop ram usage from 1.5 to 1.4Gb and not more.

Why does closing all open windows (15) and leaving only one drop ram usage by only 100mb from 1.5 to 1.4Gb.
What is in this 1.4 gb ?
I don't care much about ram, It's just that cpu usage spike like crazy by the end.
''Edited to remove swearing - TonyE''

Hi musicfan, Sorry you are having problems with Firefox. Maybe you should have asked earlier and we could have fixed it.
Reading your comments I do not see that rolling back to an insecure Firefox 22 will actually help you much. You are probably best using IE, unless you have also damaged that.
*[[Export bookmarks to Internet Explorer]]
You should not use old versions they are insecure. Security fixes are publicised and exploitable.
* [[Install an older version of Firefox]]
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html
Most others will not be having such problems. We are now able to say that with confidence because after developers missed a regression in Firefox 4 telemetry was introduced so that data was obtained. It may be an idea to turn on your telemetry, if you have not already done so, and decide to stick with Firefox.
*[[Send performance data to Mozilla to help improve Firefox]]
Trying safe mode takes seconds. Unfortunatly if you are not willing to do even rudimentary troubleshooting there is not anything we can do to help you.
*[[Troubleshoot Firefox issues using Safe Mode]]

High kernel_task RAM Usage in Yosemite 10.10.1

Hello All,
No matter what I'm running, I always have high RAM usage with kernel_task. I've looked around the other threads and never found a definitive solution. I wouldn't call it crippling to my system but I would like to resolve the issue. Below is a screenshot of my activity monitor, and my Etrecheck run. Please let me know anything I can do to reduce the RAM usage of this process.
Problem description:
High kernel_task RAM Usage (800MB - 1.5GB)
EtreCheck version: 2.1.5 (108)
Report generated December 18, 2014 at 10:49:34 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:36:30
Disk Information: ℹ️
WDC WD1001X06X-00SJVT0 disk0 : (1.12 TB)
EFI (disk0s1) <not mounted> : 210 MB
SSD (disk0s2) / : 119.69 GB (61.10 GB free)
Macintosh HD (disk0s3) /Volumes/Macintosh HD : 1.00 TB (529.88 GB free)
HL-DT-ST DVDRW GS31N
ST1000LM024 HN-M101MBB disk1 : (1 TB)
disk1s1 (disk1s1) <not mounted> : 32 KB
HD-PATU3 (disk1s3) /Volumes/HD-PATU3 : 1.00 TB (196.18 GB free)
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
BUFFALO INC. HD-PATU3
Configuration files: ℹ️
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.rane.driver.sixtyeight.10.6 (1.1.2f4) [Support]
[not loaded] com.rane.driver.sixtyone.10.6 (1.0.0f1 - SDK 10.6) [Support]
[not loaded] com.rane.driver.sixtytwo.10.6 (1.0.0f1 - SDK 10.6) [Support]
[not loaded] com.rane.driver.sl2.10.6 (1.0.1f3) [Support]
[not loaded] com.rane.driver.sl3.10.6 (1.3.2f6) [Support]
[not loaded] com.rane.driver.sl4.10.6 (1.0.1f3 - SDK 10.6) [Support]
[loaded] com.serato.usb.kext (2.3.0) [Support]
/Volumes/Macintosh HD/Applications/MATLAB_R2015a.app
[not loaded] com.mathworks.sldrtkrn (5.0.0 - OS X 10.8) [Support]
/Volumes/Macintosh HD/Applications/SoundTap.app
[not loaded] com.NCHSoftware.driver.SoundTapVirtualAudioDevice (1.0.0d1) [Support]
/Volumes/Macintosh HD/Applications/Tunnelblick.app
[not loaded] net.sf.tuntaposx.tap (1.0) [Support]
[not loaded] net.sf.tuntaposx.tun (1.0) [Support]
[not loaded] net.tunnelblick.tap (1.0) [Support]
[not loaded] net.tunnelblick.tun (1.0) [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[failed] com.facebook.videochat.[redacted].plist [Support]
[invalid?] com.valvesoftware.steamclean.plist [Support]
[loaded] net.tunnelblick.tunnelblick.LaunchAtLogin.plist [Support]
User Login Items: ℹ️
MacOS Folder (/Applications/Steam.app/Contents/MacOS)
Alarm Clock ApplicationHidden (/Applications/Alarm Clock.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 25 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
Unity Web Player: Version: UnityPlayer version 3.5.6f4 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
AdobePDFViewer: Version: 10.1.13 [Support]
DirectorShockwave: Version: 11.6.6r636 [Support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
SeratoVirtualAudioPlugIn: Version: 1.0.11 [Support]
Hear: Version: 1.1.1 - SDK 10.5 [Support]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
SIXTY-EIGHT Audio Control Panel [Support]
SL 2 Audio Control Panel [Support]
SL 4 Audio Control Panel [Support]
TimeMachineScheduler [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
SSD: Disk size: 119.69 GB Disk used: 58.59 GB
Destinations:
HD-PATU3 [Local]
Total size: 1.00 TB
Total number of backups: 44
Oldest backup: 2013-12-25 21:46:07 +0000
Last backup: 2014-12-16 21:41:48 +0000
Size of backup disk: Excellent
Backup size 1.00 TB > (Disk size 119.69 GB X 3)
Top Processes by CPU: ℹ️
 12% Google Chrome Canary
 1% WindowServer
 0% fontd
 0% hidd
 0% GoogleTalkPlugin
Top Processes by Memory: ℹ️
275 MB Google Chrome Canary
241 MB iTunes
172 MB mds_stores
155 MB Finder
134 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.95 GB Free RAM
3.59 GB Active RAM
777 MB Inactive RAM
1.85 GB Wired RAM
2.81 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 18, 2014, 10:13:38 PM Self test - passed
Dec 18, 2014, 10:05:52 PM /Library/Logs/DiagnosticReports/backupd_2014-12-18-220552_[redacted].cpu_resour ce.diag [Details]

The kernel_task memory usage is normal.

Increase RAM usage

Similar Messages

Maybe you are looking for