Increase the RAM frequency in the BIOS Graphics
My laptop graphics frequency is 900, while the 1250's you could r9 m290x graphics.
Please frequencies from 900 to 1250 to increase the video RAM in BIOS, Graphics gx60 destroyer
bios:http://www.msi.com/support/nb/GX60_Destroyer.html#down-firmware&Win8.1%2064
Version : BR44392.202
I could increase my friends graphics program to change BIOS VBE 7.0.0.7b
Similar Messages
-
Hi I was wondering if it is possible to upgrade the graphics card on a MacBook Pro and the RAM without voiding the warranty? I have a gt 650m in my MacBook Pro, non retina, and to me, its not enough power for me, so i was looking around, and I found a retailer that would give me a nvidia gtx 660m for a decent price. Also, the ram needs to be at least 12gbs, to ensure that my computer would run fast.
If you can help, please tell me,
Thankyou.No, the video card cannot be exchanged - you have a pretty decent GPU there; not sure why you'd want to switch it out. You can upgrade the RAM to a maximum of 16GBs. Apple recommends upgrading in matching pairs, so I don't really think I'd try 4GB and 8GB stick.
Both Crucial and OWC have memory available for the new Macs. Both are reputable dealers and know Macs well and I would only buy from these sources (and I would buy Crucial, were it me).
Although your Mac didn't come with a users manual outlining the installation of the additional RAM, you can download the late 2011 model users guide as the models themselves are almost identical.
Good luck - write back with any questions.
Clinton -
My daughter's 13" late 2011 MacBook Pro has frozen (null sign displays) after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. I reinstalled Yosemite on the MBP HD, but it still hangs in mid install. Despite the fact that I can boot from the external, could it be the RAM that's the problem? I'd happily put 8 GB in if it seems probable that would solve the problem. I've tried all the suggested procedures that I've seen posted here. Disk Utility, and my older version of DiskWarrior indicate the HD is OK. I have DiskWarrior 5 on order.
Boot the MBP with the OPTION key down. If successful, you should see two HDD icons, Select the recovery partition (on the right).
From the 4 option menu select Disk Utility.
Run Disk Utility>First Aid, Verify and Repair.
If the disk cannot be repaired, it will have to be replaced.
Ciao. -
after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???
You can always shut it down manually via the Task Manager
(CtrlShiftEsc)...
On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]> -
From the RAM limit to the CORE limit...
I was thinking that Bidule (Plogue) is a good way to expand RAM Logic limit, but at the end it definetely shrinks to to be a way to add 2 or max 3 instruments to Logic possibilities (because of Rewire one core limit). If I use an Ivory and an Omnisphere plug I already get the Rewire core meter of Logic going near the top
(I have a 2x3 Intel Xeon Quad Core)
So, from the RAM limit to the CORE limit.....
And I think also that the hard criticised Spectrasonics Atmosphere and Trilogy plugins wrappers, now reveal very very useful for saving my Logic RAM expansion possibilities...
And about Logic 9..nothing mentioned on 64 bit support....If file size is the biggest concern, once you've cleared out
all items
you don't need any longer, try:
1. Doing a Save As, then a Save As again. Often, for whatever
reason,
this finally gets rid of old, unused objects.
2. Create a new project and import the existing project's
slides. This
can have the same effect.
In my experience, the first is better for reducing file sizes
and the
second is better for getting rid of any playback anomalies.
Otherwise, a better approach for what you're doing, again in
my
experience, would be to cut up the audio outside of Captivate
into one
file per slide (using a tool like Audacity), import them all
into the
library, then add each individually. That's our standard
process and
we've yet to experience these huge, bloated CP files (knock,
knock).
Erik
luke@nesc wrote:
> I have been using Captivate to imbed an audio recording
of a presentation into
> the slides for said presentation. The audio is in the
form of one large mp3
> file. When adding the audio, I select the option to
distribute over many files,
> and line up all the slides to the correct part of the
audio. If i need to edit
> the slide times or audio (this happens frequently
because captivate seems to be
> rather buggy when splitting up the single audio track
into one for each slide)
> the resulting Captivate Project file rockets in file
size. ....
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware -
MOVED: how to change the cpu frequency/voltage from bios for k8ngm2il(n force 410)?
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=98841.0Quote from: tech_junkie on 11-July-06, 16:03:26
recently purchased an --msi k8ngm2il(n force 410) motherboard and an amd 64 3200+(venice core) processor..but now i cant overclock the processor from the bios settings,when ever i try to change the fid settings from the bios settings and try to reboot, the settings go back to its default value!so i cant change the settings!! so does that mean that i cant change the fid settings and overclock my processor??please help!!please tell me how do i cahne the cpu frequency??please
do you save the settings before exiting bios? also make sure that you clear your bios once by removing the battery for 10 min, in order to clear all rezidual information. -
Can anyone help me I have to macbook pro 13" and 15" retina display double the ram too but the 15"
Hi I have a brand new logic board in this macbook and it's clean clean as a baby's bum yet it runs slowish can't figure out what to do anymore spent sleepless nights learning all about this macbook
My 15" runs slow, when the internal fan goes on the laptop reallyh really slows down grrrrhhhhhh help?Hardware Information:
MacBook Pro (Retina, Mid 2012)
MacBook Pro - model: MacBookPro10,1
1 2.3 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 512 MB
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software:
OS X 10.8.5 (12F45) - Uptime: 0 days 3:27:41
Disk Information:
APPLE SSD SM256E disk0 : (251 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 250.14 GB (230.95 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Anywhere
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
User Login Items:
None
Internet Plug-ins:
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
QuickTime Plugin: Version: 7.7.1
Audio Plug-ins:
AirPlay: Version: 1.7 - SDK 10.8
iSightAudio: Version: 7.7.1 - SDK 10.8
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
2% WindowServer
1% fontd
0% activitymonitord
0% PluginProcess
0% coreservicesd
Top Processes by Memory:
344 MB PluginProcess
254 MB WebProcess
106 MB Safari
57 MB WindowServer
41 MB syncdefaultsd
Virtual Memory Information:
5.32 GB Free RAM
1.13 GB Active RAM
153 MB Inactive RAM
1.39 GB Wired RAM
749 MB Page-ins
0 B Page-outs -
Hi,
I am developing a packet sniffer application, I am getting a packets from adapter and am updating the information in the Wpf Datagrid using a Background worker. it is a continuous process. So if run this application for hours, after 5 or 6 hours I am getting
a "Sytem.OutofMemoryException" as the RAM being full. Now my requirement is, the usage of RAM should have a some limit(suppose 750MB) for my application, once application reaches this, the usage of RAM should not increase and at the same time I should
not get "OutofmemoryException". I mean application should free cached memory of starting Rows of DataGrid, means I should not display the initial Rows and I should display the latest entries. how can I achieve this?
thanks,
EDIT:
Here I am using DataGrid.Items.Add() method to add the entries into the datagrid.
How can I change my code to Observablecollection items now?You could remove entries from the ItemsSource collection of the DataGrid once the number of items reaches a certain threshold of items.
If you for example use an ObservableCollection<T> as the ItemsSource of the DataGrid you could handle its CollectionChanged event and remove the oldest item when there are a total of say over 5000 (you may of course increase this value in your
partiuclar application of you require to be able to display more than 5000 items in the DataGrid) items in it. This will make sure that there will never by any more than 5000 items kept in memory:
const int MaxCount = 5000;
public MainWindow()
InitializeComponent();
ObservableCollection<string> collection = new ObservableCollection<string>();
collection.CollectionChanged += (ss, ee) =>
if (collection.Count > MaxCount)
collection.RemoveAt(0);
yourDataGrid.ItemsSource = collection;
Since there is no good way to determine exactly how much physical memory the objects in the ObservableCollection<T> occupy so you better choose a maximum
number of items to be kept in memory (like MaxCount = 5000 in the sample code above) and then remove the oldest one when the number of items reach this maximum.
Hope that helps.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. -
How do i make the ram preview render the whole thing not just part of it
i have a super-fast modern desktop computer so ram isn't an issue. i want the green bar to cover the whole thing, not leave gray and blue spaces.
unrelated but while i'm here: is there a way to increase just the gamma of just the in-program composition window since i like to keep my monitor dark for my eyes but always have to increase brightness when watching movies as a result.
also is there a way to increase the text size of the ui besides increasing the text size for the whole windows 8.1?How much RAM does your super-fast modern desktop have? AND what is the size of your composition?
If you're getting spaces between the green bar, your RAM Preview options may include skip frames.
If you don't have enough RAM to cache a large (or long) video, you can lower the resolution that you're attempting to RAM Preview (in your comp window if you're using Auto, or in the RAM Preview options). Unfortunately, it means that you'll be trading quality of the video playback for duration of frames played.
You can adjust the exposure of the video in the comp or footage windows by using the Exposure Button
Turn up the value to over/under expose the video, but it won't change the RENDER, just the way you look at it in the window.
You can toggle the icon on/off if you have a certain value you like to keep it set to.
Exposure Button & Value -
My P75-A7200 laptop with bad ram - Is the ram soldered to the motherboard???
Hello,
I have a quesiton about my laptop and issues I've been having.
It has been blue screening a lot over the past month or so and when I took it back to the store where I bought it for service, I was told that there was nothing that they could do to it since the ram was soldered to the mainboard and that it would have to be sent back to the factory for repair.
I'm just trying to find out more about my laptop and hopefully avoid a costly repair if possible. I thought my laptop had 4 dimm slots, if so, where do I find the slots and can I replace the ram???
Is it really soldered to the main board???
Thanks for any help.the link but it doesn't talk about the 2 dimm slots under the keyboard that I was reading about earlier today.
You must not have looked at the video! It's out of focus, but you can see that the RAM is replaceable and inserted in slots.
That video is for a Satellite P75-A7200. As you can plainly see, the RAM is not under the keyboard.
Even the spec says there are four slots!.
Memory
Configured with 8GB DDR3L 1600MHz (max 32GB)
4 main memory slots. Two slots are occupied.
-Jerry -
What is the start frequency for the digitizer 5142
Dears,
what is the start and stop frequency of the digitizer 5142 which is 100MS/s?Hello Ahmed.Abdulbaky,
When you say “start” and “stop” frequencies, I assume that you are inquiring about the maximum and minimum sampling rates of the 5142 digitizer. Is this correct? If so, then take a look at page 13 of the NI PXI/PCI-5142 Specifications, and you will see under Real-Time Sampling that the minimum and maximum sampling rates are 1.526 kS/s and 100 MS/s, respectively.
To answer your question from your other post, yes, you can change the sampling rate of the digitizer through the NI-SCOPE API. If you are using LabVIEW with the device, there is a VI called “niScope Configure Horizontal Timing.vi” that you can use to set the sampling rate, by wiring the desired sampling rate to the min sample rate input. This VI can be found in the functions palette under Measurement I/O » NI-SCOPE » niScope Sonfigure Horizontal Timing.vi.
Chris_G
Sr Test Engineer
Medtronic, Inc. -
I have bought a macbook air 11" with 2gb ram. I tested it out at the apple store and those products had only a 2gb ram and I did not have a problem with that. Although I believe this size ram will work for me, I am curious about whether I can increase it at a later time if I choose to do so.
The current MBA's memnory is not upgradeable.
Whatever memory allocation it was built with, is the only memory you will be able to have.
The only way to get 4 GB of ram is to return you air and buy another one with 4 GB.
If you just bought it, you may want to think quickly about the return policy, if you anticipate ever wanting that 4 GB.
But for many users, 2 GB will suffice. -
What's the ram capacity of the original air?
now that i've upgraded to lion my air is running much slower. i have 2x 1gb 667 MHz DDR2 SDRAM installed and wondered if i can, and should, upgrade to 2x 2gb.
The original Air is limited to 2 Gigs. The memory is not replaceable.
Captfred -
Im getting errors when i do a mem test on my hp a6000f.....ive replaced the ram and still get errors
im getting errors on mem test, Ive replaced the ram, still get errors. How do I disable the L2 cache....on hp a6000f, I dont see anywhere to do it while im in the BIOS/ CMOS setup
I get error code : BIOME-1Here is what you should do to trouble shoot your problem.
Open up the composition that is giving you problems
Your error message tells you that you are having problems with the Shatter effect so select the layer with the shatter effect and turn the effect off
Try a ram preview
If the ram preview is successful add a solid to your comp
Copy your shatter effect and paste it to the new solid you created
Turn off all other layers
Try a ram preview
If the ram preview crashes go back to step 6 and reset shatter and try again
If the ram preview is successful start adding the properties from your original shatter effect until you get a crash.
If the ram preview works the first time you try step 6 then there is something wrong with the combination of shatter and the original layer it was applied to so remove shatter from that layer, pre-compose that layer moving all attributes to the new layer then paste the working shatter from the solid to the pre-comp, turn off the solid and try another ram preview.
Do you kind of get the procedure here. When something is causing a crash first isolate that problem, try it on something simple, then try different things until you can reproduce the crash. Make sure you are saving copies of your project so you can easily go back.
If you can't figure out what settings in Shatter are causing the crash then we need to know everything there is to know about your composition and see a screenshot or the project file. If it is the footage that is causing the crash then you need to transcode, recompress, or in some other way change the format of the footage. There is nothing we can surmise from the details you have given us that give us any clue why shatter is crashing. It usually does not. I can't think of the last time it caused a crash for me. The only possible thing I can think of that would be causing a crash is that the number of particles is causing your system to run out of memory. -
Is this RAM compatible with the TS130?
I found this RAM by doing a search with the stats of the RAM that comes with the TS130 and it's much cheaper, but I'm not sure if it will work. I noticed that this memory is simply DIMM instead of uDIMM, so I want to be sure before I buy it. Thanks!
RAM you get must be designated for your age and type of model in question. Getting a specific timing such as
"....PC3 8500; the Amazon RAM is PC2 5300" is insufficient to guarantee compatibility. First identify exactly what model you have according to Apple, then buy RAM from a vendor that says the RAM is for the age of model in question. Here are tools to find your model and model age:
https://discussions.apple.com/docs/DOC-6413
And three vendors that sell by the age/model:
http://www.datamem.com/ http://www.crucial.com/ http://www.macsales.com/
There may be others. Do not buy valueRAM or any RAM without a lifetime warranty.
Maybe you are looking for
-
Clock type symbol and pending on report not printing how do I remove
HP Photo smart 6510 network printer print from Lumina Windows phone working fine for over week suddenly not printing. Checked status at e center and items are pending with a clock like symbol next to them, How can I remove this symbol and could this
-
How can I use a desktop local ISP connection to connect BB to internet?
I am traveling out of the US with my Tour 9630 and have no wireless service provider for data services in my present location. However, I have access to a local desktop machine with standard internet service through an ISP. Is there a way to connec
-
I backed up old phone to PC then did a sync to new 4S but when trying to update apps on phone it states - account not valid in Argentine store, must switch to U.S. store. I am in US and when I view account on PC it correctly shows me in US. Now what?
-
Which is better,websphere or weblogic?
Our company want to establish a network serving for PC ,wap ,pda and so on using j2ee.but I don��t know which is better Between Websphere application server and Weblogic. Who can tell me in detail?
-
Changing Pricing condition-JCV1
Hi all i want to change the following conditon in PO ( relevant part) where in the > CVD is calculated wrong. ( 16% of Basic customs duty). ( CVD ought to be > 16% of material cost + basic customs duty). i have specified in IMG schema condition to ca