Increase the scroll activation areas

When re-ordering images within the filmstrip or grid view, one can drag an image onto the edge line of the panel and LR view will scroll through the images. The area that currently allows for this is quite small. For example, in the filmstrip, it would be intuitive if one could grab an image and hold it over the left or right arrows to activate scrolling. I vote to enlarge these scroll activation areas. Thanks.

If you are working with OOPs check BCALV* and RSDEMO* in SE38

Similar Messages

Increasing the size of designated text area in a photo book

I am using IPhoto version 9.5.1 on a MacBook Pro (10.9.2). I am trying to increase the designated text area so that I can increase the font size. This will allow for the final product to be more legible. Currently, I am featuring a student per page. The designated text areas are 4 separate sections on these pages. I would like to include on each page the following.
Aviator
Person's Name
Algebra I
Homecoming Dance
When I increase the font size in those 4 designated areas, the red caution triangle with exclamation point states, 'This text doesn't fit the designated text area!'
I have two questions.
1. How do I increase the text area so the larger text will fit and print properly?
2. Is there an overall command that I can input these increases to the text area so that the 36 papes have the same changes in the designated text areas? Otherwise, I will have to make those changes for each individual pages that are featuring a student.
Comptroller

You can "adjust" a photo frame or text box size on a page with the following key combinations:
Command + Option +⬆arrow: increase frame height.
Command + Option +⬇arrow: decrease frame height.
Command + Option + ➜ arrow: increase frame width.
Command + Option + ⬅ arrow: decrease frame width.
To adjust its position on the page use these key combinations:
Command + Control + ➜ arrow: move frame to right.
Command + Control + ⬅ arrow: move frame to left.
Command + Control + ⬆ arrow: rotate frame counter clockwise.
Command + Control + ⬇ arrow: rotate frame clockwise.
You can conver the standard frame (on the left) to this one (on the right)
Always be sure to create a PDF file of the book for proofing before ordering a book. This Apple document describes how to create the PDF file: iPhoto, Aperture: Previewing an order in iPhoto or Aperture. Keep the PDF file to compare it with the printed copy when it arrives.
If you have Pages you can easily create custom book pages as images and add them to a 1 photo per page layout by following this tutorial: iP11 - Creating a Custom Page, with the Theme's Background for an iPhoto Book
OT

Increase the pointer area

that's it.. is it possible to increase the mouse pointer area?
not the cursor image, but the area upon which the click takes effect!
i'd like to make it easier to grab the window edges and so on..

maybe i'm just too used to windows' precision enhancement algorithm, which works great when you speed up your pointer. i see i'm not the only one who misses that: http://ubuntuforums.org/showthread.php?t=277063
nevermind, i'll learn to be more precise

In Firefox 5.0.1, why are websites off-center now? And where are the scroll bars?

After updating to Firefox 5.0.1, website content presents off-center, font sizes are either too big or too small, and the scroll bars are missing. I am running OSX 10.5.8 on a Mac Mini.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Snagit v10 build 788 - unable to capture input - scrolling active window

Hello,
I use Snagit v10 build 788.
I cannot use the "Scroll Active Window" option on Firefox 4 Beta.
It does not work.
I get the Snagit message : "Unable to capture input".
Using Internet Explorer or on an other PC the Firefox v3.6, the "Scroll Active Window" option of Snagit v10 is working.
How to solve it ?
Thanks
Caius

FIXED!
Guys, you will not believe how easy this is to fix! After hours of frustration I finally discovered a Firefox add-on called '''Screengrab'''. Install Screengrab, then right click in Firefox, choose Save, Complete Page - and you get a perfect scrolled page capture!
Even better, you can open it in Snagit to work on it further (Screengrab saves it as a png)

How can I get the scroll bars to be more visible/contrasting?

The scroll bars are difficult for me to differentiate from their background. Can I change their colour or darkness to make them more visible?

Firefox uses the native scroll bars by default.<br />
You can try to select another window theme in your Linux distribution that has better scroll bar appearance or see if installing a Firefox theme helps.
* https://support.mozilla.org/kb/Using+themes+with+Firefox
*https://addons.mozilla.org/firefox/themes/

Front panel scroll bars are missing

Hi
Can somebady tell me how to get my front panel scroll bars back. Block diagram is showing them but front panel is not. i can probably open another vi and copy and paste my application. Thanks

suni wrote:
Can somebady tell me how to get my front panel scroll bars back. Block diagram is showing them but front panel is not. i can probably open another vi and copy and paste my application. Thanks
What is your LabVIEW version?
All the above responses only apply if your front panel does NOT contain splitter bars. Once you have splitter bars, things get a bit more complicated and you can easily create a situation where the scroll bars are also off in edit mode and the VI properties cannot get them back directly.
What you need to do is right-click in the splitter bar and select e.g. right pane (or whatever) as follows:
Message Edited by altenbach on 09-17-2008 03:56 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
recoverScrollers.png ‏17 KB

Keeping Control of Active Area Dimentions

As the subject reads, I am having a hard time keeping control
of my button
dimensions.
I am starting with a 12pt "About" text and converting it to
button symbol.
The Up and Over state reads 16x46, in the Active Area I
unchecked the "set
active area automatically" and set my own dimensions of
20x48. Now, when I
place the button symbol in the stage it reads 17x48!
I forgot to mention I added a bit of glow to the over state,
but it is
almost negligible.
To top it off, the slice name is a million digit number,
instead of a slice
number format.
Is there a better technique to have a tighter control of my
buttons?
Thank you for your assistance,
Ricky

Good question. This bugs me, too.
I usually either zoom in, or enter values numerically in the Option Bar.

Mavericks ruins navigation. Why did they eliminate the scroll bar?

Mavericks has ruined navigation. You can no longer color code files (except with tiny dots that appear far away from file names in the margin); the scroll bars sometimes appear. Sometimes they don't. Its very difficlt to grab window borders to resize the windows. What is the point of all this?

bemuse wrote:
Mavericks has ruined navigation. You can no longer color code files (except with tiny dots that appear far away from file names in the margin); the scroll bars sometimes appear. Sometimes they don't. Its very difficlt to grab window borders to resize the windows. What is the point of all this?
If you are using an old-style mouse, you might be frustrated. But with any recent pointing device the scroll bars are not really needed. I don't use the scroll bars much because...
I can scroll with my mouse scroll wheel
I can scroll with the trackpad built into all MacBooks
I can scroll with the keyboard using arrow keys, Page Up/Page Down, spacebar...
In other words, with all of these better and faster methods, having to move your mouse all the way over to the edge of the screen to pick at a scroll bar or little arrow is now a relic of the 1980s and is much less efficient than using the direct touch gesture or scroll wheel methods.
As for the window border grabbing, that is a compromise. If you enlarge the target area of the window borders, you reduce the target area for controls within the window or palette itself. The best solution for window resizing is to simply have a little patience, slow down until the resize arrows appear and then grab. Overall, window resizing is more flexible than it has ever been since you can grab any edge now, instead of just one corner as in the older OS Xs.

JTree's getRowForLocation, how to get the scroll offset?

I have noticed, that calling getRowForLocation from the mouse event, can give me some unexpected behavior when the scroll bars are visible. What's happening is that when I call getX() and getY() on the mouse handler, it's not offset into the scrollable area. So I end up with row 0, when in fact it's the top row visiable in the scroll pane, but not in the tree.
Any suggestions, pointers?

Use a selectionLister???import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.event.*;
public class Test extends JFrame {
JTree jt = new JTree();
public Test() {
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    Container content = getContentPane();
    content.add(new JScrollPane(jt), BorderLayout.CENTER);
    jt.addTreeSelectionListener(new TreeSelectionListener() {
      public void valueChanged(TreeSelectionEvent tse) {
        TreePath tp = jt.getSelectionPath();
        if (tp!=null) System.out.println(tp.getLastPathComponent());
    setSize(100, 100);
    setVisible(true);
public static void main(String[] args) { new Test(); }
}

The letter in composed message are to small - how to increase the size

The letters in message composed are too small.
How to increase the size of letters?

if you hold control button on keyboard and scroll the mouse wheel, it zooms in and out on webpages.

Windows Azure Active Directory MA - Maximum number of items that can be serialized or deserialized in an object graph is '500000'. Change the object graph or increase the MaxItemsInObjectGraph quota.

Trying to use WAAD with FIM 2010 R2 SP1 (4.1.3496.0) and during export several objects cause a warning/info with:
Maximum number of items that can be serialized or deserialized in an object graph is '500000'. Change the object graph or increase the MaxItemsInObjectGraph quota.
I looked, this appears hard coded into the MA, anyone know what causes this? My best guess is something like a large group membership? Does anyone know what the limits around the WAAD MA are?
Here is the indepth error logged during the failure:
ProvisioningServiceAdapter::ExecuteWithRetry: Action: Export, Attempt: 0, Exception: Microsoft.Online.Coexistence.ProvisionRetryException: Unable to communicate with the Windows Azure Active Directory service. Tracking ID: e94e6020-8434-4aa7-9a29-b2edf7fe6b2e
See the event log for more details. ---> System.ServiceModel.CommunicationException: There was an error while trying to serialize parameter http://schemas.microsoft.com/online/aws/change/2010/01:syncObjects. The InnerException message was 'Maximum number
of items that can be serialized or deserialized in an object graph is '500000'. Change the object graph or increase the MaxItemsInObjectGraph quota. '. Please see InnerException for more details. ---> System.Runtime.Serialization.SerializationException:
Maximum number of items that can be serialized or deserialized in an object graph is '500000'. Change the object graph or increase the MaxItemsInObjectGraph quota.
   at System.Runtime.Serialization.XmlObjectSerializerContext.IncrementItemCount(Int32 count)
   at WriteArrayOfstringToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , CollectionDataContract )
   at System.Runtime.Serialization.CollectionDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeAndVerifyType(DataContract dataContract, XmlWriterDelegator xmlWriter, Object obj, Boolean verifyKnownType, RuntimeTypeHandle declaredTypeHandle, Type declaredType)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeWithXsiType(XmlWriterDelegator xmlWriter, Object obj, RuntimeTypeHandle objectTypeHandle, Type objectType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle, Type
declaredType)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
   at WriteSyncObjectGroupToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , ClassDataContract )
   at System.Runtime.Serialization.ClassDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeAndVerifyType(DataContract dataContract, XmlWriterDelegator xmlWriter, Object obj, Boolean verifyKnownType, RuntimeTypeHandle declaredTypeHandle, Type declaredType)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.SerializeWithXsiType(XmlWriterDelegator xmlWriter, Object obj, RuntimeTypeHandle objectTypeHandle, Type objectType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle, Type
declaredType)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerialize(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
   at System.Runtime.Serialization.XmlObjectSerializerWriteContext.InternalSerializeReference(XmlWriterDelegator xmlWriter, Object obj, Boolean isDeclaredType, Boolean writeXsiType, Int32 declaredTypeID, RuntimeTypeHandle declaredTypeHandle)
   at WriteArrayOfSyncObjectToXml(XmlWriterDelegator , Object , XmlObjectSerializerWriteContext , CollectionDataContract )
   at System.Runtime.Serialization.CollectionDataContract.WriteXmlValue(XmlWriterDelegator xmlWriter, Object obj, XmlObjectSerializerWriteContext context)
   at System.Runtime.Serialization.DataContractSerializer.InternalWriteObjectContent(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
   at System.Runtime.Serialization.DataContractSerializer.InternalWriteObject(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
   at System.Runtime.Serialization.XmlObjectSerializer.WriteObjectHandleExceptions(XmlWriterDelegator writer, Object graph, DataContractResolver dataContractResolver)
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeParameterPart(XmlDictionaryWriter writer, PartInfo part, Object graph)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeParameterPart(XmlDictionaryWriter writer, PartInfo part, Object graph)
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeParameter(XmlDictionaryWriter writer, PartInfo part, Object graph)
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeParameters(XmlDictionaryWriter writer, PartInfo[] parts, Object[] parameters)
   at System.ServiceModel.Dispatcher.DataContractSerializerOperationFormatter.SerializeBody(XmlDictionaryWriter writer, MessageVersion version, String action, MessageDescription messageDescription, Object returnValue, Object[] parameters, Boolean
isRequest)
   at System.ServiceModel.Dispatcher.OperationFormatter.OperationFormatterMessage.OperationFormatterBodyWriter.OnWriteBodyContents(XmlDictionaryWriter writer)
   at System.ServiceModel.Channels.Message.OnWriteMessage(XmlDictionaryWriter writer)
   at System.ServiceModel.Channels.BufferedMessageWriter.WriteMessage(Message message, BufferManager bufferManager, Int32 initialOffset, Int32 maxSizeQuota)
   at System.ServiceModel.Channels.BinaryMessageEncoderFactory.BinaryMessageEncoder.WriteMessage(Message message, Int32 maxMessageSize, BufferManager bufferManager, Int32 messageOffset)
   at System.ServiceModel.Channels.HttpOutput.SerializeBufferedMessage(Message message)
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Online.Coexistence.Schema.IProvisioningWebService.Provision(SyncObject[] syncObjects)
   at Microsoft.Online.Coexistence.ProvisionHelper.InvokeAwsAPI[T](Func`1 awsOperation, String opsLabel)
   --- End of inner exception stack trace ---
   at Microsoft.Online.Coexistence.ProvisionHelper.CommunicationExceptionHandler(CommunicationException ex)
   at Microsoft.Online.Coexistence.ProvisionHelper.InvokeAwsAPI[T](Func`1 awsOperation, String opsLabel)
   at Microsoft.Azure.ActiveDirectory.Connector.ProvisioningServiceAdapter.<>c__DisplayClass1.<Export>b__0()
   at Microsoft.Azure.ActiveDirectory.Connector.ProvisioningServiceAdapter.ExecuteWithRetry(String actionName, Action action).

Hi gdedshg,
>>Maximum number of items that can be serialized or deserialized in an object graph is '65536'. Change the object graph or increase the MaxItemsInObjectGraph quota
When meet the above exception, please try to do the following configuration:
On the server side:
Add the following to the server's config file:
<behaviors>
<serviceBehaviors>
<behavior name="MyServiceBehavior">
<dataContractSerializer
maxItemsInObjectGraph="2147483647" />
</behavior>
</serviceBehaviors>
</behaviors>
And reference it in the service using the following code:
<services>
<service
behaviorConfiguration="MyServiceBehavior"
name="serviceName">……
On the client side:
Add the following:
<behaviors>
<endpointBehaviors>
<behavior name="MyClientbehavior">
<dataContractSerializer
maxItemsInObjectGraph="2147483647"/>
</behavior>
</endpointBehaviors>
</behaviors>
And reference it in the endpoint using the following code:
<endpoint address="serviceAddress"
behaviorConfiguration="MyClientbehavior"
For more information, please try to refer to the following article:
http://blog.aggregatedintelligence.com/2011/01/wcf-maxitemsinobjectgraph-error.html .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Scroll window, define active area

hey,
ive found this great scroller on www.flashkit.com
and started to mess around with it,
its posted here.
http://www.popmontreal.com/TEST/city_test2.swf
is it possible to activate only the area witnin the border,
so that scrolling will stop when your mouse leaves that area
thanks!,
anton

any direction would be appreciated...
this is the AS that is used,
onClipEvent (enterFrame) {
if (_root.mainVar == 0) {
homeX = (-_root._xmouse)+600;
} else {
homeX = (-_root.mainVar)+600;
thisX = _x;
diffX = homeX-thisX;
if (_root.mainVar == 0) {
moveX = diffX/60;
} else {
moveX = diffX/40;
_x = thisX+moveX;
is it possible to use an onClipEvent (mouseMove) with _ymouse
& _xmouse to define an active area ?
thanks,
anton

HT3149 iPhoto 09 When I click on the preview pane to move a photo into edit, it shows up black and the edit buttons are not active. How do I fix that?

When I click on the preview pane to move a photo into the edit pane, there is no image just a black square and the edit buttons are not active. A few images in an event will move to the edit pane but most will not. I cannot work with those images that do not enter the edit pane..no attaching to email, make a card, slideshow, etc.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

How do you tell if the advanceddatagrid scroll bars are showing?

How do you tell if the advanceddatagrid scroll bars are showing? This is because the grid crashes when mouse scroll events are firing when theres not enough data so that scroll bars are not showing

Basically when you have enough data in a datagrid so that it cannot all be displayed at once, you have the scrollbars showning allowing you to scroll.When you can see all the data or rows at once you cannot see the scrollbars. What I need to test for is whether these SB's are currently showning.
Hope that is clearer.

Increase the scroll activation areas

Similar Messages

Maybe you are looking for