Increase visible size of Screenshot Attachments

I was happily sending "screenshots" (.png) on Apple Mail which were large enough for the recipient to view the details quite easily. (almost actual size)
Like a fool, I decided to try and reduce the visible size to a smaller footprint..
The result of which is that the recipient can no longer view my attachments because they are now TOO small.
I've hunted high and low on the Apple Mail Menu to try and find a way of "INCREASING" the footprint size of my screenshots back to a level of viewing I had originally before I messed around with it..
Originally, as far as I can remember, I "right clicked" on the actual screenshot (.png) to bring up a menu which gave me the option to reduce it's visible footprint size but since reducing the size the "right click" menu seems to have dissappeared.....
I know it must be a simple task but can someone help me out please ???

Thanks for that...
After posting I was scouring the Forum for a solution and found just what you've just said in another Post...
Thanks anyway for the quick reponse.....
I'm feeling a little bit stupid, such a simple remedy when you know where to look !!!!

Similar Messages

Where can I Increase the size limit for attachments

Good Morning:
I am working in OCS R2 (9.0.4). Where can I Increase the size limit for attachments in the messages sent. Also can I set this parameters to user level or the change affect every user in the system?
Thanks a lot.

babowa wrote:
The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
It's a b*&^ch getting old . I still use the screen zoom instead of decreasing resolution, but maybe soon ...

How to increase the size of attachments?

When I try to upload a file over 2mb, the following error occurs:
Task failed.
Caused by: Task '0' in activity '/PlanejamentoDeVenda#Default-1.0/Interactive[DefinicaoDoMetodoDeEntrada]' for instance '/PlanejamentoDeVenda#Default-1.0/3/0' could not be successfully executed. The task failed while executing method 'JSP_Router'.
Caused by: The method 'JSP_Router' from class 'xobject.Fuego__AutoGen__Screenflows__.__ImportacaoDaPlanilha' could not be successfully executed.
Caused by: Process execution engine execution error.
Caused by: The task could not be successfully executed.
*Reason: 'fuego.server.exception.AttachmentMaxSizeExceededRuntimeException: Attachment max size is exceeded. Max size = '2097152'. Current file size = '5654528'.'.*
*Caused by: Attachment max size is exceeded. Max size = '2097152'. Current file size = '5654528'.*I have added to workspace.properties a new value for entry fuego.workspace.servlet.Attachment.MAX_ATTACHMENT_SIZE such as: 11309056, but the error continues.
Have also tried to put in the BPM Object that represents the file as separated but the problem also remains.
Someone would tell me how can I increase this size?

duplicated.
Edited by: krock on Jan 15, 2009 12:33 PM

Increasing Email Size Limits for some users

Hi All,
For some users (management) i needed to arrange that they are able to send bigger files then the default 10MB limit to each other.
I used this procedure to do so,
https://www.simple-talk.com/sysadmin/exchange/increasing-email-size-limits-for-your-high-profile-users-in-exchange-2010/
In a nutshell:
Set Global Transport Org. Config to 200MB
Set Transport Send and Receive connector to 200MB
Created a Distribution group adding the MT members and me (for testing)
Created a transport Rule for the 10MB limit for all users and exception for the distribution group
(Believe me, i am not happy with the 200MB size limit)
All seems to work but i have one issue that i cannot tackel or maybe it is by design.
-Managemant can also send big files to all
users who do not have this privelige, this is not someting i want, sending 100MB+ attachments to over 150 users.
Is this by design or do i mis something?
Thanks,
Ron

Hi RonGielgens,
Attachment size in exchange has to be set on
Global settings
Connectors (send and receive connectors)
Mailbox
The global settings will affect all the others. of course connectors will affect specific servers and mailbox one user. You have to set the global to the absolute max size you want to allow in your organization.
after you do this you will need either to set the 10MB on each mailbox
Get-Mailbox | Set-Mailbox -MaxSendSize 10MB -MaxReceiveSize 10MB
Then change the limit on specific mailbox
or another way is to create a transport rule that will reject the email if the attachment size it > 10MB unless the sender/recipient is the required user or group.
so basically create 2 transport rules
1. reject messages sent to anyone with attachment > 10mb unless the recipient is userX
2. reject messages sent from anyone with attachment > 10mb unless the sender is userX
Normal case it should not allow.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

How to increase the size of the exported dashboard in powerpoint

When I am trying to increase the size of the dashboard in the powerpoint then the fields are overlapping in the powerpoint slide.
Actually in the preview the size of the fields is clear and font is visible. But in the ppt if the report size is not increased then the font is not clear, and when increasing the report in the ppt then the fields are overlapping.
How to resolve?
Thanks in advance

Siva,
This is very common issue.
Try increasing the font size and align your components in design mode, and try resizing the dashboard in ppt as well.
Hope this helps...
-Anil

How to increase font size in the report when emailed as PDF

How do I increase the font size of the report when I distribute the report as PDF to the users. I tried using different paper sizes in the LayOut tab in Broad Caster and Orientations. When I open the PDF from the mail I see the report shrinked and not readable, but when I magnify the report the numbers are visible with no loss in quality. I cannot give the users to print a shrinked PDF file. I would like to see a visiable font and print the same size what I see.

The size of the font is increased by selecting a bigger page size while emailing. This will automatically increase the size of the page.

Reducing pixel dimensions increases document size.

In photoshop cs6. Working on an image of 15000x18662 pixels, with about 100+ layers. doc size 800mb/6.43GB. To optimize speed, I reduced the file size to the absolute minimum I need which is 13200x16423. However now the file size grew bigger 620.2M/6.45GB. Some layers extend beyond the visible image area, so I cropped the image "deleting cropped pixels" , but this increased the image even further to 6.50GB. What's going on here?
Why is the file size increasing when I decrease pixel size?
Why would deleting cropped pixels increase file size?

This is a user to user Forum.
If no one who has bothered to read the original post considers it of enough interest to investigate or advise that is up to them.
Can you provide the original image?
Depending on the interpolation settings on the content downsampling might result in a lessened effect of the applied compression.
You seem to give the approximated values from "Document Sizes" in the status bar – what is the actual file’s size?
Quote from the Reference:
Document Sizes Displays information on the amount of data in the image. The number on the left represents the printing size of the image
—approximately the size of the saved, flattened file in Adobe Photoshop format. The number on the right indicates the file’s approximate
size including layers and channels.

How to increase the size of textbox in the .jsp page of Human Workflow

Hi All,
I need to increase the size of the textbox in the .jsp page of Human Task.
I am showint some text in the textbox which are currently not editable, and as the length of textbox is small, the complete text is not visible.
If anyone know how to customize the jsp page of Human Task, please share.
Regards,
Vivek

Thanks Eric,
but i think this one is different.
I am trying to edit the source of .jsp page in JDev. which has the code for textbox as below:
<%=getField(payload, form, context, thisDisabled, locale, task, "CustID", "/ns0:task/ns0:payload/ns1:Customer_Verification_Data/ns1:Company_Information/ns1:CustID", "string")%>
now how can i add some class format in .css file and how will i access that particular class in this textbox.
Thanks,
Vivek

Sampling increase buffer size

hello, I'm trying to sample my scxi module (SCXI-1100 32Ch analog input module) at 10Hz... so I'm taking my samples in a timed while loop... I was wondering if I had this wired correctly... I'm sampling 16 inputs of the scxi-1100... inside my timed while loop I have set up "NChan 1Samp"..... I keep getting the increase buffer size error.... but I'm only taking 1 sample.... I'm not sure where I've gone wrong... I'm including a picture.... much thanks.
Attachments:
sampling.PNG ‏27 KB

Hi Fibo,
Thanks for the post!
If you require to do continous aquisation you need to read Nsamples.. i.e. to pull all the samples collected out of the buffer when you loop re-iterates.
I would recommend looking in the example finder (Help>>Find Examples...Hardware Input/Output>>DAQmx>>Analog..
Im pretty sure this would explain the buffer zier error.
** Its fine to have two create channels, if you want to change the settings relating to each channel. You just cant have mutiple Analog Tasks.
Let me know what you think,
Kind Regards,
Message Edited by Hillman on 10-15-2008 09:14 PM
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Need some Idea for my final year project to increase buffer size

hi...i need some idea from someone to give some idea, advice or some excersice/toturial about " how to increase buffer size" on my final year project, i have try find the solution..but it's still have problem on my oscilloscope.VI. I was design my final year project using LabVIEW 8.6 and now i state my design for someone to refer my project.
Thank You
Attachments:
Oscilloscope A.llb ‏166 KB

Don't know if this is what you're searching for, and I don't know if there is such a function in LV 8.6, but I'm using LV 2010 and under DAQmx Pallete, you go to "Advanced Task Options", there is a function "Configure Output Buffer", in which you can configure the buffer size you want.

I use iwires to connect macbook to lg tv to watch netflix.How do I increase screen size on tv.I have tried display options on settings- not working

I use iwires to connect macbook to lg tv to watch netflix.How do you increase screen size on rv.I have tried display settings ,but not working

I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..

In mail, how do you increase font sizes in a reply. Cannot find things like "underline", "italic" etc either. Where are they? Entourage was easier!!

In mail, how do you increase font sizes in a reply. Cannot find things like "underline", "italic" etc either. Where are they? Entourage was easier!!

Preferences/Compsing/set to Rich Text (only then you can use bold etc).
Then Rightclick the toolbar in Mail, and clcik Customize the toolbar.
Put the icons (with or without text) that you want on your toolbar.

Bold chars & increase font size in ALV Top of Page - OOPS

Hi,
I am using ALV OOPs to display my data.
I am splitting the container and using top container to display headings in following way:
data:   top TYPE REF TO cl_dd_document
CREATE OBJECT top
    EXPORTING
      style = 'ALV_GRID'.
lv_fontsize = cl_dd_document=>large.
lv_text = 'HEADING'.
CONDENSE lv_text.
CALL METHOD top->add_text
    EXPORTING
      text         = lv_text
      fix_lines    = 'X'
      sap_fontsize = lv_fontsize         "cl_dd_document=>large
    CHANGING
      document     = cv_top.
But the heaidng is not displayed with high font size and is similar to the text with cl_dd_document=>medium
How can I increase font size of heading.
Thanks!

Hi Vasu,
Use SAP_STYLE parameter in the method.
Value will be HEADING or KEY.
Regards,
Amitava

How to increase font size in report

Dear ABAPers,
I got one requirement that i hav to increase font size in report.
I am using Write statement in report.
PL guide me regarding this.
Regards,
Simha.

hi shakya,
I have tried that,
i think font size cannot be increased.....it wil auto adjust based on ur no of coloumns and records.... try to reduce the no of coloumns u r displaying, then it will auto adjust itelf.
With regards,
S.Barani

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages. Thanks again.

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages.
Thanks again.
PS Are you working on a version for the iPad and iPhone with Add Blocker? That would be great!

Here are some zoom add-ons which might provide a workaround:
[https://addons.mozilla.org/en-US/firefox/search/?q=image+zoom&cat=all&x=0&y=0 Image Zoom]
As regards your question about iPad and iPhone, you'd be better off posting that question here: [https://forums.mozilla.org/addons/ Mozilla Add-ons Forum]
P.S. ''Apologies for not responding earlier''.

Increase visible size of Screenshot Attachments

Similar Messages

Maybe you are looking for