Increase XL Reporter's Decimal Places to more than 2

Hi All,
Can anyone advise on how to increase the default decimal places in XL reporter to be more than 2?
The figures i retrieved from SAP Financial Template for the stock account is 1234567.81 but XL report shows it as 1234566.76.
Does showing a differences of 0.05 value.
I did a sum for the stock account from JDT1 using query. it is also showing me 1234567.81.
So, I am assuming that XL reporter is using 2 decimal places by default.
Please help my balance sheet is not balance.
Regards
Jessie

I found that there is a SAP Note written to increase the decimal in SAP XL Reporter.
See SAP Note 896207.

Similar Messages

Can't export from ECC report to Excel 2010 with more than 65 K Rows

I see several posts about Excel 2007 and the 65K row limitation, but we are rolling out Office 2010 (Excel 2010) and find that it still will not allow download of more than 65,000 from an ECC report screen.
Excel 2010 is supposed to handle over a million rows, and user is receiving an error message that they can not do this.
Will SAP allow download to Excel 2010 of more than 65K rows?
Are there Excel settings, or GUI levels / settings we have to have ?
Ruth Jones

Details from the end User:
When you export line items from any detailed line item transaction in SAP that supports exporting to an excel format, SAP will only allow you to export 65K+ lines, equal to the number of line items that were available in the Excel 2003 format. If you have more than that many line, you have to download the file as u201Cunconverted.u201D While you can then open the u201Cunconvertedu201D file in excel, it is not properly formatted correctly, and may contain page headers and footers that need to be deleted. In Office 2007/2010, excel was extended to 1 million+ line items. When will SAP excel integration be upgraded to expand beyond the old 65K limit on number of exportable line items in excel format?
For example, transaction FBL3N is used to display line items in GL accounts. Line items are routinely exported for further analysis in Finance. GL accounts often have more than 65K line items. When you try to export these results to a spreadsheet format, you will get a message that the list is too large to be exported. However, if you select the unconverted format, you will be able to export the file. Here is an example: (Note that this is only one example with one transaction, there are many more SAP transactions that have this same issue.)
From the Menu, she if following the path List --> Export --> Spreadsheet
Receives the pop-up box entitiled: "Export List object to XXL", with words, "An XXL list object is exported with 71993 lines and 20 columns.   Choose a processing mode". Radio button choices of Table or Ptivot Table. She chose Table.
Then receives a message that (at the bttom of the page), List Object is too Large to be Exported.   Help says this is message PC020. But offers no further information.

Can we increase the length of a IO to more than 60?

Hi Experts,
I want have a requirement where in the incomming data for a particular IO is more than 60 in length. In order to mapp it in BW we have to increase the length of the IO to 80.
But, the problem is the standard is only 60 length max.
I want to know is there a way we can increase the length of the IO?
Your help is much appreciated.
Regards
BN

Hi,
Have a look at this thread
Maximum length of the long text is 60
Regards,
Amruth

Change "Recent Places" to more than 5 items?

I really like the "recent places" dialog box when saving items across applications. But I wish I could see more than five items in the list.
Is there a way to change it to 10 or 15 places?

DavidM3, any luck?
Wondered if you ever found a solution to this, or if anyone can direct me to a thread revolving around this conversation in particular?
I've been searching for an answer to this functionality for months with no avail, and with not being able to find anyone even asking the same questions as me. I like that you are able to expand the recent places drop down with the aforementioned Terminal command, but that's only in the Save As / Open dialogs. I'm interested in that same functionality for a basic Finder window (not within an application). What's interesting is that in the image below, you can see that Apple has included a feature similar to what we want, but only contains the breadcrumb trail to what folder we are in currently. As you know, that is what composes the top half of any drop down menu in Save As / Open dialog windows. But the bottom half is recent folder locations, including network (server) AND local folders. This is crucial and would be a super speedy improvement to my workflow. I know people say to use Smart Folders/ Smart Searches but that doesn't include network locations—only local.
If anyone has any knowledge of how to maybe get a Finder hack or 3rd party app to create this functionality, I would be eternally grateful! Maybe this is a feature I could request of the noble people behind the app XtraFinder (a great little app for those looking for expanded Finder functionality).

Reports not getting generated for more than 100 records

Hi,
On 8.1.1.1 with BI Publisher 10.1.3.4.1, some of the Reports are not running when it has more than 100 records and throwing error.
Below are the some of the specific errors captured in XMLP log
EAITransport EAITransportDebug 4 00000df64e7130a4:0 2011-09-15 18:25:54 *** HTTP response Headers from Data Send request:
HTTP/1.1 500 Internal Server Error
Date: Thu, 15 Sep 2011 12:55:17 GMT
Server: Oracle Containers for J2EE
Connection: close
Content-Type: text/xml; charset=utf-8
Transfer-Encoding: chunked
ObjMgrLog Error 1 00000df64e7130a4:0 2011-09-15 18:25:54 (soapbinding.cpp (564)) SBL-EAI-04304: Unknown part ':oracle.apps.xdo.webservice.exception.OperationFailedException' for operation 'uploadReportDataChunk' exists in SOAP message.
ObjMgrBusServiceLog Error 1 00000df64e7130a4:0 2011-09-15 18:25:54 (outdisp.cpp (209)) SBL-EAI-04308: Operation 'uploadReportDataChunk' of Web service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.apps.xdo.webservice.exception.OperationFailedException: java.io.FileNotFoundException
Please let me know what would be the reason for this issue?
Thanks in advance for your help.
Thanks

Are you using 'PublicReportService'? Check the integration for Siebel Reports 8.1.1.1 and BI Publisher 10.1.3.4.1 the port 'PublicReportService_v11' is specified. Did you import this WSDL as directed?
i.e., export from BI Publisher http://<host>:<port>/xmlpserver/services/PublicReportService_v11?wsdl
Not certain this is the cause but I have not got the same issue.
Edited by: user1634268 on 27-Sep-2011 10:38 - did not read the original error correctly first time

Not able to get correct BIP report output in case of more than 6000 records

Hi,
When we are trying to generate the BIP report in siebel 8.1.1, for the list of records whose count exceeds 6000 records, we are gettin a error as
"Error <?> invoking method "<?>" for Business Service "<?>"(SBL-OMS-00203)
W have done all the optimizations recommended by siebel like
1)BIP Report Wait Time = 250
2)Database Polling Interval=1
3)Maximum Tasks parameter=100
4)Maximum MT Servers parameter=2
5)DSMaxFetchArraySize=-1
6)Scalable mode in XDo cfg=True
Than also we are getting the above error.
Do any body have any solution or how we can optimize the report because the same report is working with less than 6000 records and giving details of all the records correctly but if records are increased beyond that than we are getting error as specified above.
Thanks

The code below looks correct. Is that the expected behavior of your app?
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
<![CDATA[
public var ValueP2:Number = 0;
private var grossValue:Number = 0;
private var totalValue:Number = 0;
private var finalTotalP2:int = 0;
public function test():void {
if (Number(TextInput2.text) == 1 || Number(TextInput2.text) == 2)
ValueP2 = 1;
totalValue = grossValue + ValueP2;
else if (Number(TextInput2.text) == 3 || Number(TextInput2.text) == 4) {
ValueP2 = 5;
totalValue = grossValue + ValueP2;
else if (Number(TextInput2.text) == 5 || Number(TextInput2.text) == 6) {
ValueP2 = 9;
totalValue = grossValue + ValueP2;
trace("totalValue "+totalValue);
finalValueP2(totalValue);
public function finalValueP2(tVP2:int):int {
var tallyP2:int = 0;
if (tVP2 < 3)tallyP2 = 1;
if (tVP2 >= 3 && tVP2 <5)tallyP2 = 2;
if (tVP2 >= 5 && tVP2 <10)tallyP2 = 3;
finalTotalP2 = tallyP2 * 7;
trace("finalTotalP2 " +finalTotalP2);
return(finalTotalP2);
]]>
</mx:Script>
<mx:TextInput id="TextInput2" enter="test()"/>
</mx:Application>

Issue on Hyperion Report when we are showing more than one pivot section on

Hi All,
I am showing two pivots on the report section.
One pivot is having variable number of rows (let’s say P1) and other is having fixed number of rows (let’s say P2).
While creating the report section we are showing P2 below P1. (for any particular selection of filter P1 was having 5 rows including Total and P2 is having fixed number of rows.)
But while processing the report for any other filter selection the number of rows in P1 got increased and it got overlapped on P2 as P2 will not shift downwards when P1 expands.
Pivot behaves as images on report section so we are not having properties like scroll bar or any other control on report section for pivot.
Please suggest some action items to be done to overcome this problem.
Thanks in Advance.
Ujjawal

Thanks Stuart,
I am using Hyperion Interactive Reporting Studio version 9.3.1. I tried to get the functionality by the method described by you. But I was not able to get 'Position' from the property window. I am having 3 tabs in Properties window i.e. Border and Background, Picture and Alignment. In alignment i tried but it is only for text alignment.
Can you please elaborate your answer?

How can I save a website as a favorite place under more than one file folder? I think I used to have this ability, now it'll only save it in one place.

What this does for me is allow me to find rarely accessed websites by looking under different kinds of categories of favorite places. If I'm restricted to only one location for the data it makes it harder to find.
Thanks in advance for any help you can give. It may still be possible to do this, and I just don't know how. In the past, if I created a new file folder and saved a webpage to the new folder, it would persist even after I saved it a 2nd time to a different folder. Now, if I save it to a 2nd folder, it will disappear from the 1st folder.

You can do a Copy & Paste in the Bookmarks Manager (Shift+Ctrl+B) to create a copy of a bookmark. 
You can also drag the website's favicon on the left end of the location bar to a folder into the Bookmarks menu drop down list or to a folder in the Bookmarks side bar (Ctrl+B) or onto the Bookmarks Toolbar. 
In the side bar you need to click to the left of the icon to prevent Firefox from opening the bookmark.
*Old Add Bookmark Behavior: https://addons.mozilla.org/firefox/addon/8479

The i movie progressbar is stuck in one place for more than an hour

and under the bar written "building project"
will i be able to access my projects again if I will force the program to quit??
(The last thing i did before it started to load was to mark the clips from one project and than i swiped to another project and pasted the clips over there right after that the loading bar apeared and got stuck on after a few seconds)

and under the bar written "time remaining: less than a minute" (safari and anything else runs fine)
will i be able to access my projects again if I will force the program to quit??
(The last thing i did before it started to load was to mark the clips from one project and than i swiped to another project and pasted the clips over there right after that the loading bar apeared and got stuck on after a few seconds)

More DECIMAL places for MM price-Not Global

I have read the many postings on decimals. However, I have not seen the exact scenario I'm inquiring about.
I want to increase the decimal places from 2 to 4 for the cost of materials we purchase (i.e. supplier price), but I do NOT want to set this as a global aspect for the company when dealing with numbers/currency.
It's not just a simple matter of setting a different unit of measure, because let's say we order a reel of capacitors - the reel may come in qty of 1,000 or 2,500 (only one example). So, we really need to set price by (ea). The problem is that many of our parts price at .0014 (example) and in SAP that shows a cost or price [depending on where you're looking] of zero. Plus, the Purchasing agent sends a PO with incorrect price information.
It would be very helpful if anyone could tell me how to increase the number of decimal places for specific fields as opposed to globally.
Thanks you!!

The right tool to do that is the pice unit. This is in the system for ecatly that purpose, to provide more precision in prices. It has nothing to do with unitz of measure that is used for logistical purposes.
If you have a price 0f 0.0014 each you can set a price unit of 1000 and will have a price of 1.40 for 1000. You still can have only 500 or even 1 on stock. the calculation done if you receive your 2500 will be 2500 * 1,40 / 1000 which is of course the same as 2500 * 0,0014
best regards, Udo

Decimal places in the BCC field

Hello,
I created a field in the xml to save a field of type double, but only allows up to three decimal places.
<property name="freight" data-type="double" column-name="freight" display-name-resource="freight" category-resource="categoryBasics" >
<attribute name="propertySortPriority" value="50" />
</property>
with sql for the column freight
freight
number(28, 20)
NULL
I noticed that this also occurs in other fields in BCC,
Is it possible to increase the number of decimal places for a property?
thanks.

Hi,
I created the view mapping as your orientations and looked like this
<add-item item-descriptor="itemMapping" id="AmImTest">
<set-property name="itemName"><![CDATA[test]]></set-property>
<set-property name="description"><![CDATA[AssetManager Test itemMapping]]></set-property>
<set-property name="mode"><![CDATA[AmMmDef]]></set-property>
<set-property name="viewMappings"><![CDATA[ivM1]]></set-property>
<set-property name="formHandler"><![CDATA[AmFhDef]]></set-property>
<set-property name="itemPath"><![CDATA[/atg/multisite/SiteRepository]]></set-property>
<set-property name="name"><![CDATA[AssetManager]]></set-property>
</add-item>
<add-item item-descriptor="itemViewMapping" id="ivM1">
<set-property name="propertyMappings"><![CDATA[propertyViewMapping=pvM1]]></set-property>
<set-property name="attributeValues"><![CDATA[includedProperties=av1]]></set-property>
<set-property name="displayName"><![[scopus.geralProperties]]></set-property>
<set-property name="name"><![CDATA[ item View Mappi]]></set-property>
</add-item>
<add-item item-descriptor="attributeValue" id="av1">
<set-property name="value"><![CDATA[id,name,description,freight]]></set-property>
</add-item>
<add-item item-descriptor="propertyViewMapping" id="pvM1">
<set-property name="propertyView"><![CDATA[pv1]]></set-property>
</add-item>
<add-item item-descriptor="propertyView" id="pv1">
<set-property name="description"><![CDATA[BIZUI Basic editor for double properties with more than 3 decimal characters.]]></set-property>
<set-property name="attributes"><![CDATA[inputFieldMaxlength=pvAtrDef1]]></set-property>
<set-property name="mode"><![CDATA[aMgrMmView]]></set-property>
<set-property name="isComponentPropertyView"><![CDATA[false]]></set-property>
<set-property name="isReadOnly"><![CDATA[false]]></set-property>
<set-property name="type"><![CDATA[double]]></set-property>
<set-property name="name"><![CDATA[SCO BIZUI with more than 3 decimal characters.]]></set-property>
</add-item>
Did I missed something?

Decimal places diferent in BO SUM function than from DB

Hi,
I have a column from a Netezza database with 2 decimal places, if I apply a sum() function in BO (report) the decimal places are 4.
The strange part is that if i do exact the same query in a DB2 database the decimal places are always two (like in DB) even if i use a sum function in report.
There is some configuration regarding the database i'm using to set the decimal places in the report level to be the same than in DB?
Edited: I've been studing the problem and I found using a odbc instead of a jdbc makes all the columns have 2 decimal places, and the sum problem doesn't happen. Now my issue is the division. How is possible that with the exact same values with two decimal positions, in BO and exporting to excel the last decimal place is different in some cases
Example:
Lets say A/B with A=13549678065,560000 and B= 21629484348,690000. With Netezza result is 62,6444803173527 and Db2 62,6444803173528
Thanks for your time.

I've never seen this particular problem before. Quite strange. It sounds more like an OLAP or SQL Server issue, not BPC.
I'm not aware of any configuration on SQL server that allows you to control the decimal separator.
I had a similar problem in the past, when my customer refused to follow the install guide instructions, and insisted that the server be set to non-US English regional settings. If I recall, the issue had to do with date formats not decimal separators. They ended up un-installing and re-installing the entire OS (with US English setup, the second time around), and then it worked fine. This was back on 5.0, and perhaps the situation has changed since then. There's a section in the master / install guide that covers the server-side language & regional settings in some detail.
But before you look at that, try something easier -- is it possible that the cube is somehow corrupted? Do you get any errors when you process the application? Perhaps there is some data in the fact table with an invalid member ID.
Do you get the same result in your Excel report when you use both EVDRE and EVGET?
And if you browse the cube data in SQL Mgmt Studio (logging into the Analysis Services cube) do you see aggregated data there?
Regards,
Tim

Problem with transaction CUNI and configuring decimal places

Note: I'm actually an ABAP programmer and do not know almost anything about SAP configuration.
Note2: Sorry if this was posted in the wrong section. I am trying to avoid an ABAP solution so I did not post this in the ABAP section.
Note3: Sorry for cross posting. I'm trying to make this visible to as much experts as possible.
\[Problem\]
I'm tasked to increase the number of decimal places that a certain standard program in MM accepts.
\[ABAP solution I'm trying to avoid\]
The consultants' initial recommendation was to make Z copies of the standard table and the standard programs that references that table. This would be rather dangerous as there is the risk of missing certain parts of the code If I was to replace all occurences of the old standard table with my custom Z table.
\[Standard solution I'm trying to do\]
Now I've read several threads here that makes use of transaction CUNI to adjust decimal places of certain units of measure (see Re: Unit Of Measure problem and change decimal places in PO quantity). However, when I tried it, It does not work the way I expect it to.
In SE11, I created a custom table that has a quantity field (length: 13, decimals: 3) and a unit field (length 3)
In CUNI, I created a new ISO code TST (for test). Then I created a new Unit of measure ZTT (ZTesT) which makes use of my ISO code TST. I set the decimal places to 6.
When I insert data into my custom table, instead of 6, the number of decimal places remain at 3.
Please help in adjusting decimal places without touching the table.

Hello Dzed,
I've read several posts that suggest transaction CUNI to adjust decimal places in standard unit of measures. What I tried is a simplified simulation of what is needed.
In a more realistic sense, consider table VBRP and column FKIMG. What If I want to store items in VBRP and allow 6 decimal places for FKIMG but I am not allowed to modify the table? Is making a Z copy of VBRP the only solution? Or is there a more standard way of doing this?
My worry is that If I copy a table, I also need to copy the programs that use it and modify them accordingly. Our Basis do not want the standard tables touched.
Kyle

Decimal Places for Pricing conditions in Purchase info record

Hi guys:
In the material master, Moving average price/std price 2 decimal places, purchase info records -pricing conditions we have option of 2 decimal places.
Is there any we can increase the number of decimal places .?
Thanks
sweth

Hi,
you can either have high prices or high accuracy, but not both together (because field length stays fixed).
Don't think about a modification - to much changes would be necessary. I never have seen a situation, where you needed more than about 6 significant digits (= not '0'): high prices don't have decimals.
So you usually change a factor: Maintain prices for higher or smaller units to get into the correct range. Or you might use different currencies in different situations. You can also maintain prices per 100 or 1000 units (in case of cheap products).
If nothing else is possible, you might use two conditions: one without decimals, second one only decimals, the sum of both can be a very precise high price.
Better to use the option price unit if you want exact value in place.
Kuber

Decimal Places SAP 07

Hi All,
Does anyone know why we cant change Decimal places settings in SAP 07? I am running PL 08. When I try to change the decimal places settings from 6 to 2, I receive an error that says 'Decimal Places cannot be decreased'.
We are able to change this in PLD but my client has a problem with viewing this ridiculous amounts of zeros on the screen as-well.
Please help!

Not possible to do this AFAIK. You can only increase the number of decimal places, not decrease. This should have been explained at the initial system setup.

Increase XL Reporter's Decimal Places to more than 2

Similar Messages

Maybe you are looking for