Increased Login Time

Hi Everybody,
I have a macbook(intel processor with mac os x 10.6.1) bought it last February, it was working perfectly fine, up until a few weeks ago, that it crashed. I had put it into sleep, after some time when i tried to login, it took too much time in verifying the password, i did a forced shutdown, but after restarting i couldn't login. I repaired with the OS X DVD. Since then my computer hasn't been like what it used to be. I thought maybe a reinstallation might solve the problem. I reinstalled it two weeks ago, it worked find for the first week, but after that it started taking time in every single process.
Now since last night the login time has increased(by login i mean, from the login window that i write my user/pass it takes more than one minute before its usable!). and also while doing something in finder or launching applications it freezes for some seconds! I tried repairing disk permissions/emptying caches (with Onyx) but the problem still persist.
Have anyone encountered such a problem? or can anyone atleast give me a clue what the cause might be?
Thanks

zap PRAM (restart hold option, command, P and R)
safe boot (restart holding shift)
check smart status from disk utility. it should say "verified" if the hard drive is okay

Similar Messages

How to increase the time at the end of what aaa requeries the authentication of a client web

Hi All,
I configure ASA aaa to authentificate our internal web client to access to internet. It's check the username/password of client in our Active Directory.
When the client initiate the first connexion, the ASA request the login connexion and when it's correct, it authorise the access. But after 10 min for exemple, it's request again the login, and so one and so one. Approximativelly, after each ten minute, it requeste an username/password.
I want to know how can i increase the time between two authentifcation. Or increase the time of 10 min.
Thanks.

The authentication timeout is configurable via the "timeout uauth" command, and you can set either absolute or inactivity timeout.
Here is the command for your reference:
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/t.html#wp1569874

JDBC Receiver - how to increase Read Time

Hi Experts,
Please tell me how to increase the read time and response time in the JDBC receiver adapter.
Thanks,
Kalyani.

hi,
Check 2.3.5 section of this document:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
According to document:
In the advanced mode table section of sender channel and receiver channel configurations, we can set driver properties for each DB connection. Any such property would have to contain prefix 'driver:'(with out quotes).
For Oracle Database JDBC thin driver 10.2.0.3 version, the property oracle.jdbc.ReadTimeout helps to set read timeout while reading from the socket. Also for setting login time out in Oracle, we use oracle.net.CONNECT_TIMEOUT. To set these two properties use as follows: driver:oracle.jdbc.ReadTimeout 1000 driver:oracle.net.CONNECT_TIMEOUT 1000 The TimeOut Driver properties like ReadTimeout and CONNECT_TIMEOUT are in milliseconds.
Refer note 1078420 for more details
Thanks.

User Login Time in obiee 11g

Hi all,
we can get get the user login time using
*@{session.loginTime}*
But my requirement is to get the last login time ie., Previous login time.
How to achieve this.
Thanks,
Haree.

Hi MK,
Thanks a lot for your response.
I am not aware about that. Can you please explain me in brief.
Possibly if you have any document related to it please share with me.
Thanks,
Haree.

Help with exception: A connection could not be obtained in the specified login time of 5 seconds

Hi Kodo gurus,
I run into following problem:
Since I start to use JDOQL queries, the system I am developing start to
throw Exception saying:
javax.jdo.JDODataStoreException:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = 'learningMode1']
[PRE=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = ?]
A connection could not be obtained in the specified login time of 5
seconds. [code=0;state=null]
NestedThrowables:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = 'learningMode1']
[PRE=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = ?]
A connection could not be obtained in the specified login time of 5 seconds.
     at
com.solarmetric.kodo.impl.jdbc.runtime.SQLExceptions.throwDataStore(SQLExceptions.java:23)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:732)
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:93)
     at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:792)
     at
com.solarmetric.kodo.query.QueryImpl.executeWithArray(QueryImpl.java:668)
     at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:609)
It seems it always happens when we are doing a query. I had the
"javax.jdo.option.MaxPool=20" and for postgresql I have "max_connections
= 80", the action I am doing at that time is quite simple (and the
system is just freshly started) and I would not expect it is using more
than 2 connections since there is only one read and one write going on.
Do you guys have any clue how could this happen? do I miss something
obvious? and how are the connections managed for the query?
thanks a lot!
Tao

Hi, Steve,
Sorry I am late on the responding - was distracted by some other stuff -
here is the stack trace I got:
// STATCK TRACE
//###############################################################javax.jdo.JDODataStoreException:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = 'learningMode3']
[PRE=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = ?]
A connection could not be obtained in the specified login time of 5
seconds. [code=0;state=null]
NestedThrowables:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
[SQL=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = 'learningMode3']
[PRE=SELECT t0.JDOIDX, t0.JDOCLASSX, t0.JDOLOCKX, t0.booldefaultval,
t0.datatype, t0.name, t0.strdefaultval FROM PROPERTYDEFX t0 WHERE
t0.name = ?]
A connection could not be obtained in the specified login time of 5 seconds.
at
com.solarmetric.kodo.impl.jdbc.runtime.SQLExceptions.throwDataStore(SQLExceptions.java:23)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:732)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:93)
at
com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:792)
at
com.solarmetric.kodo.query.QueryImpl.executeWithArray(QueryImpl.java:668)
at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:609)
at
com.cloverworxs.impl.as.profile.PropertyHelperImpl.findPropertyDefByName(PropertyHelperImpl.java:37)
at
com.cloverworxs.impl.as.profile.ProfileBase.getStringProperty(ProfileBase.java:103)
at
com.cloverworxs.app.struts.handler.ProfileHelper.getLearningModes(ProfileHelper.java:177)
at
com.cloverworxs.app.struts.handler.KuarkHandler.handleTree(KuarkHandler.java:106)
at
com.cloverworxs.app.struts.handler.MovableKuarkHandler.handleTree(MovableKuarkHandler.java:89)
at
com.cloverworxs.app.struts.handler.RecorderKuarkHandler.handle(RecorderKuarkHandler.java:111)
at
com.cloverworxs.app.struts.action.RecorderController.detail(RecorderController.java:251)
at
com.cloverworxs.app.struts.action.AbstractModelAction.execute(AbstractModelAction.java:118)
at
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:465)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at
com.cloverworxs.app.struts.RequestProcessor.process(RequestProcessor.java:44)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1422)
at
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:505)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:260)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2396)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:405)
at
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:380)
at
org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:508)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:533)
at java.lang.Thread.run(Thread.java:536)
NestedThrowablesStackTrace:
java.sql.SQLException: A connection could not be obtained in the
specified login time of 5 seconds.
at
com.solarmetric.datasource.DataSourceImpl$AbstractPool.timeout(DataSourceImpl.java:615)
at
com.solarmetric.datasource.DataSourceImpl$AbstractPool.getConnection(DataSourceImpl.java:589)
at
com.solarmetric.datasource.DataSourceImpl.getConnection(DataSourceImpl.java:326)
at
com.solarmetric.datasource.DataSourceImpl.getConnection(DataSourceImpl.java:319)
at
com.solarmetric.kodo.impl.jdbc.runtime.DataSourceConnector.getConnection(DataSourceConnector.java:51)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.getConnectionFromFactory(SQLExecutionManagerImpl.java:183)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.getConnection(SQLExecutionManagerImpl.java:142)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.prepareStatementInternal(SQLExecutionManagerImpl.java:807)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executePreparedQueryInternal(SQLExecutionManagerImpl.java:761)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executeQueryInternal(SQLExecutionManagerImpl.java:691)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executeQuery(SQLExecutionManagerImpl.java:372)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.executeQuery(SQLExecutionManagerImpl.java:356)
at
com.solarmetric.kodo.impl.jdbc.ormapping.ClassMapping.selectPrimaryMappings(ClassMapping.java:1221)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:707)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:93)
at
com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:792)
at
com.solarmetric.kodo.query.QueryImpl.executeWithArray(QueryImpl.java:668)
at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:609)
at
com.cloverworxs.impl.as.profile.PropertyHelperImpl.findPropertyDefByName(PropertyHelperImpl.java:37)
at
com.cloverworxs.impl.as.profile.ProfileBase.getStringProperty(ProfileBase.java:103)
at
com.cloverworxs.app.struts.handler.ProfileHelper.getLearningModes(ProfileHelper.java:177)
at
com.cloverworxs.app.struts.handler.KuarkHandler.handleTree(KuarkHandler.java:106)
at
com.cloverworxs.app.struts.handler.MovableKuarkHandler.handleTree(MovableKuarkHandler.java:89)
at
com.cloverworxs.app.struts.handler.RecorderKuarkHandler.handle(RecorderKuarkHandler.java:111)
at
com.cloverworxs.app.struts.action.RecorderController.detail(RecorderController.java:251)
at
com.cloverworxs.app.struts.action.AbstractModelAction.execute(AbstractModelAction.java:118)
at
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:465)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
And following is the code of "findPropertyDefByName" method:
// SOURCE CODE
public PropertyDef findPropertyDefByName(String propertyName) {
Extent propertyExtent = pm.getExtent(PropertyDef.class, true);
String filter = "name == propertyName";
Query q = pm.newQuery(propertyExtent, filter);
q.declareParameters("java.lang.String propertyName");
Collection c = (Collection) q.execute(propertyName);
int size = c.size();
if (size == 0) {
return null;
if (size > 1) {
// bad exception type
if (logger.isWarnEnabled()) {
Iterator iter = c.iterator();
while (iter.hasNext()) {
Object obj = iter.next();
logger.warn("result=" + obj);
throw new RuntimeException(
"Assertion of Uniqueness of propertyName failed");
PropertyDef pdef = (PropertyDef) c.iterator().next();
q.closeAll();
propertyExtent.closeAll();
return pdef;
The transaction is started and committed outside of this call.
Hope this helps you understanding my problem, and Thanks a lot!
cheers,
Tao
Steve Kim wrote:
Can you post or send me a test case or the applicable portion of the code?

How to track the login time and logout times of clients

hai
please give me the solution
suppose there are 5 systems connected in LAN.
how to track the login time and logout times of clients
for a given time(may be one day or 1 hour) using any programming language.
please give me the solution

When the client logs in you write the client's ID and the current time to a database. Likewise when the client logs out. Assuming of course that you have a program that knows when those events occur.

Very Slow VDI Client Login Time

Hi,
My environment contains two Hyper-V Servers for DCs, Connection Broker, RD-Web, and two Hyper-V servers as virtualization host to thin clients. All Hyper-V servers are only 35% utilized and all client VMs don't have a performance issue.
After setting up the roles and creating the "Personalized Pools", I open the RD-Web, click on the collection and here it takes a very long time in securing connection part, then a warning message appears for the connection broker self-signed certificate,
I accept it and again a very long time to open the VM.
After searching the internet I figured out that I should install "PFX" certificates for the connection broker (SSO, Publisher). In my environment, we don't use a public certificate from trusted root CAs, however, we have our own "Enterprise
Root CA".
I then figured that I should create a certificate with the following attributes:
Advanced Key Usage: Server Authentication, Client Authentication
Key Usage: Data encipherment, Digital Signature, Key Agreement
I created the certificate and imported it to the RD CB, however, the "securing connection" part was even slower than before, so I duplicated the "Computer" certificate, and configured 1024 bit certificate instead of the old one "2048".
The "securing connection" part is taking half the time now, however it is still very long "+60 seconds" to open the VM.
I still suspect that it is a certificate issue and not sure if I have done the correct certificate.
Would anyone help in this case and providing the correct steps to install a certificate for the RD CB from internal CA.
Thanks.

Hi,
To avoid confusion, let's focus on the same thread.
http://social.technet.microsoft.com/Forums/en-US/17fb24d7-61a7-49be-83b3-35bd9d8b6863/very-slow-vdi-login-time?forum=winserverTS
Thanks.
Jeremy Wu
TechNet Community Support

Increase ring time on I phone 5

How do I increase the time before I can answer my iPhone 5 before it goes to voice mail.?

thats up to your phone company, not your phone. Contact them

How to increase query time out

I have a report which is generated using a huge SQL, it is erroring while displaying results, due to time out error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 1013, message: ORA-01013: user requested cancel of current operation at OCI call OCIStmtExecute
How to increase this time so that the connection persists for a longer duration?
thanks
Rishabh

I looked in the NQSConfig.ini file for you. In here you find the following:
[ CACHE ]
ENABLE = YES;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS = "/oracle/oaobi01/data/ontwbif1013/OracleBIdata/cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
I think you can do something with this...
You can find the nqsconfig.ini in this directory:<Install Drive>\OracleBI\server\Config
Otherwise have a look in the Server Administration Guide, chapter 11

Sql memory usage increase each time win app runs

Hi,
Sql memory usage increases each time when win app runs. Why does it work like this? Is it normal ?
I restart SQL Server 2012. Only my win app uses SQL server.
First run of winapp.
start memory usage : 211.800 KB
close memory usage: 528.136 KB
Second run of xaf app.
start memory usage : 528.136 KB
close memory usage: 996.844 KB
Third run of xaf app
start memory usage : 996.844 KB
close memory usage: 997.640 KB
Fourth run of xaf app
start memory usage : 997.640 KB
close memory usage: 1.104.864 KB

Hi,
Sql memory usage increases each time when win app runs. Why does it work like this? Is it normal ?
Yes, it is perfectly normal for SQL Server to acquire and hold onto large amounts of memory indefinitely. This memory improves performance by avoiding disk I/O, query plan compilation and costly memory management.
On a dedicated SQL Server you should usually let SQL Server dynamically manage memory. It will release memory if it detects memory pressure. But if you often run other applications on the server than need significant amounts of memory (e.g. IIS,
application services), you may want to set max server memory as suggested.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Portal Users Login Time during a particular interval

Hello,
I have gone through many forums and blogs but didn't find any helpful comments on how do I get the list of users and their respective login times during a particular time interval. All my users are stored inside the portal only, I am not using a dual stack system. Please tell me if there is some way to find out the solution to this problem.
Thanks & Regards
Ashish Patel

Dear Ashish
Have you checked the Portal DB Tables ?
For example this table WCR_USERSTAT might be of use to you (but there are others).
But you might not find the information for "a particular interval". I believe you will have to do some development for that.
Kind Regards
/Ricardo Quintas

ADS application login time takes 2 minutes

Hi we have deployed 6 applications in one of our managed server and among the 6 applications is the ADS login application which connects to other application modules after loggin in.
We are using wls-10.3.3. We have given 2GB heap space to that managed server. We are using these applications in our Test environment.
When ever any single user trying to login in to the ADS login application in windows, it takes about 2 minutes to login and then home page of the application is displayed.
Please any one give suggestions on how to decrease the login time.

Hi Rene,
After giving the userid and password in ads login application and click login we see the browser connecting to the application and we get the message "http://pstest/psadslogin/faces/login/ldappsverify.jspx-Windows Internet Explorer" on the top of the white page and it is displayed for long time, where ps(project sundaram) is the name of our project. It is taking time in authentication and in verifying the ldap directory. The home page of the application is displayed after 2 minutes, some times 1 min,sometimes 30sec, sometimes less than 30 sec and in rare times it displays fast in 5 to 10 seconds. I am not understanding why it is taking long time to login. Suggest any parameters to be set in Weblogic server side.
Please suggest any ideas on this. We have deployed the applications in Oracle weblogic server 10.3.3, in linux server. And we are using Oracle 11gR2 database.
Thank you.
Edited by: yrk16 on Sep 5, 2011 6:11 PM
Edited by: yrk16 on Sep 5, 2011 8:41 PM

Linotype FontExplorer X auto-activation slows login time

Hello folks,
My problem is not that the core application FontExplorer X automatically opens at login. I have 'deactivated.. at login' - so the application itself only opens whenever I click it in the dock. However, the application's 'AutoLoad' plug-in starts at login. This is presumably a built-in feature that allows the core application FontExplorer X to load very quickly when selected at a later time. However, as a result, this seriously slows down my computer's login times.
I've tried to remove it from login items, but it's only a temporary solution - as the next time I select the core application during the course of the day, I've found that the 'AutoLoad' plug-in 'reinstalls' itself in login items. Is there a way I could stop this 'AutoLoad' plug-in from starting up when I login and remove it permanently from 'login items'?
Thanks.

Here is the official work-around for this problem.
1. Locate "FontExplorer X Pro.app" in Applications
2. Right-click on "FontExplorer X Pro.app" and select "Show Package Contents"
3. Navigate to /Contents/Helpers/
4. Double-click "FontExplorerXLauncher-3.app" or right-click and "Open" to launch it manually. This is needed only once, afterwards the plugins will work normally.
Please make sure you open the version with the "-3" suffix, the other one does not fix the problem.

GW Export - Login Time conversion

Hi,
When I use GW Import/Export to get the Login Time it is displayed as a very large number. I learned this is actually the number of seconds since January 1, 1970. I'm no math major so is there anyone who has a formula that I could use in Excel to convert this number into a useable and recognizable Date & time value? Thanks in advance.
Mike

Take a look @ this thread:
http://groups.google.dk/group/micros...browse_thread/
thread/1f645fba2b1a76b3/14eae6665bdbcb65?lnk=st&q=unix+start+date+excel&
rnum=4#14eae6665bdbcb65
Best Regards
Tommy Mikkelsen
IT Quality A/S
Denmark
Novell Support Forums SYSOP
Please Report back any success or failure, That way we all learn
Sorry, but no support through email
"I hate bugs".......Tommy Lee Jones, MIB
Be a GroupWiseR, go http://www.groupwiser.net

Alert at login time

Hi Experts,
We want to create an Alert at the time of Oracle Applications Login time for specific user and responsibility only.
How can I accomplish this ?
Can anyone help me in this regards ?
Thanks in advance
Sanjay

Create an alter on FND_LOGS table -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_LOGINS&c_owner=APPLSYS&c_type=TABLE
What is the Relationship Between the ICX_SESSIONS Table and the FND_LOGINS Table? (Doc ID 358823.1)
Oracle Alert User's Guide
http://docs.oracle.com/cd/E18727_01/doc.121/e12951/toc.htm
Thanks,
Hussein

Increased Login Time

Similar Messages

Maybe you are looking for