Increased mailbox limit on one mailbox - How long until it takes?

Good day all.
This past week we had migrated from 2010 to 2013. A few mailboxes are full and I understand why this happened. What I don't fully understand is that when we edit the limits on individual mailboxes, the change doesn't seem to take right away.
I made the change via EAC if that make any difference.
Is there a way to trigger this so that so that the end users see the results faster? The test I did was to simply send an email from OWA after I increased the mailbox but I got an NDR and OWA was warning me even before I sent the email that the recipient's
box was full.
Thanks in advance

This reg key still works in 2013 from what I have seen:
https://technet.microsoft.com/en-us/library/bb684892%28v=exchg.80%29.aspx?f=255&MSPPError=-2147217396
I generally set to 20 minutes.
If you want to make the change even more immediate, start a mailbox move on that mailbox. Once the quota change takes affect, you can cancel the move. I have seen it take a few minutes before the new quota is applies after starting the move request.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

When I change my mobile number, how long until it takes effect?

I changed my phone number on one of my lines about 15 minutes ago. How long until I can use the phone again? Currently when I try it says 'network not responding'.

If it is a 4G phone, power it off and then on again. If it is not a 4G phone dial *228 and select option 1.
These changes should take effect immediately.
Possibility you may need to get a new SIM card if it is a 4G phone. In this case visit a store.

How long does it take for bt infinity to get conne...

Hello I am just wondering I saw them doing work adding fibre optic cables outside my house since before Christmas and about 2 or 3 weeks ago for a few days any one know how long it normally takes to get the fibre optic cables connected to the exchange? I am not connected to to the cabinet but they said they have a new way to connect houses to the cabinet Green box My exchange.
http://www.samknows.com/broadband/exchange/WWPADS.
I checked the bt checker but it says I can't get it yet. Just looking for more information
Any info would be appreciated
Thank you

stephen1982 wrote:
I am not connected to to the cabinet but they said they have a new way to connect houses to the cabinet Green box My exchange.
http://www.samknows.com/broadband/exchange/WWPADS.
I checked the bt checker but it says I can't get it yet. Just looking for more information
Any info would be appreciated
Thank you
Hi stephen1982,
Just to confirm, are you on an exchange only line as the link you posted will not work for me.
If so you cannot get Infinity yet. BT are owrking on putting cabinets outside exchanges to enable E/O lines to get FTTC.
However, I don't think many have been installed as yet.
I'm sure one of the CL's will be along with a more detailed answer soon.
Best regards,
dfenceman

HT4623 I have sent my i phone through royal mail on 8th February 2013 but still it is not deliver to apple. I used the empty box sent by apple to me sent my i phone to them. Can any one advice me how long it can take to get back my iphone from repair?

I have sent my i phone through royal mail on 8th February 2013 but still it is not deliver to apple. I used the empty box sent by apple to me to sent my i phone to them. Can any one advice me how long it can take to get back my iphone from repair?

moynul82 wrote:
but still it is not deliver to apple.
If Apple has not received your phone, obviously it can't even be evaluated for warranty purposes. Have you tried calling AppleCare to verify whether they have received the phone or not?

I just got one of the new iMac. following the on screen instructions to do migration assist. I guess it connected via wifi to my old iMac. now it seems to have stopped. what can I do to not mess it all up? how long will it take on wifi?

I just got a new iMac. was following the onscreen instructions to do migration assistance and I guess it connected to my old iMac via wi fi. It never instructed me to connect via firewire. Now it seems to have stopped. what can I do that won't completely mess it up? how Long will it take to do over wi fi?

Your new iMac does not have a Firewire port so you ned this adapter:
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
to connect the two machines together and migrate simply follow the instructions in:
http://support.apple.com/kb/HT4413?viewlocale=en_US&locale=en_US#1

Sick of interleaving - how long does DLM take

Have had problems with a dishwasher tripping our electric over the past month and this has of course caused DLM to kick in any put interleave on line and limit my IP profile to always be below 60 mb. My data rate is currently 57957 and hasn't increased for the past month steadily dropping from the 60mb ip cap last month when power cuts happened.
Before my connection was working great and my data rate was a lot closer to the Max data rate, currently it is at 57957, Max at 65760. The Max data rate has been as high as 69000, still no increase in IP data rate.
The main thing though is interleaveing, I know that this is controlled by DLm and cannot be turned of directly, but as my IP profile seems to be stuck and steadily decreasing on every connection restart (which the hh5 seems to do on a whim sometimes)
My line stats seem to be ok SNR 6.0\6.0
Line attenuation 18.2
Please can my IP profile be reset to remove my IP cap which would hopefully put me back on fastpath which I had been on for months and months till the power cuts

same as mine https://community.bt.com/t5/BT-Infinity-Speed-Connection/Poor-Service-from-BT-adamant-about-problem/...
Please can a mod look at my connection just reset the IP profile please, there are no faults on my line!!!!!!!!!
Re: Poor Service from BT, adamant about problem!
Options
on ‎28-07-2014 1h09
I feel this is the exact problem I've been having posted on here titled sick of interleaving - how long till DLM turns it off.
Could you check if your 1st hop is around 12 ms (click start, run, cmd, enter, tracert www.BBC.co.uk) my guess would be interleaving has been put on your line too.
If your router resets too many times (mine due to faulty dishwasher tripping electric)
Once this is on it seems to take ages to reset back to normal. Like you I have the hh5 and this will sometimes do a random disconnect (firmware bug or BT messing with connection?) I always see in my event log a cwmp login from bt which will then reboot the router.
Like you my attenuation is very short (18.2) SNR At 6.2 but it seems because my hh5 sometimes just reboots connection ( usually around 2.20am going from event logs) that interleaving will never come off. I have read that it takes 2 weeks constant connection for speeds to return to normal and interleaving to be turned off.
Not happy about my connection for last month, after being very happy for months and months. As soon as DLM has kicked can feel difference especially in pings more than raw speed for me.
Will run down my contract and jump ship as soon as contract runs out if mine doesn't improve.
Message 19 of 20 (7 Views)
Posted from my mobile
Add Tag...
Quick ReplyReply
smoke999
Visitor
Posts: 4
Registered: ‎26-07-2014
0
Re: Poor Service from BT, adamant about problem!
Options
on ‎28-07-2014 1h17
https://community.bt.com/t5/BT-Infinity-Speed-Connection/sick-of-interleaving-how-long-does-DLM-take...
Is this the BT backdoor to manange connection?
(172830.560000) CWMP: session completed successfully
22:05:05, 27 Jul.
(172830.320000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:05:01, 27 Jul.
(172826.800000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:05:01, 27 Jul.
(172826.790000) CWMP: Session start now. Event code(s): '2 PERIODIC,4 VALUE CHANGE'
22:05:01, 27 Jul.
(172826.590000) CWMP: Initializing transaction for event code 2 PERIODIC

12 New Accounts in July, How Long does It Take to Recover?

Ok, early to mid July, I opened up 12 new accounts, only 4 inquiries totaling over $28,000 CL. Also I got a bump from Walmart 700 to 4,000! As the new cards are being reported to the bureau, my utilization has dropped from 24% to 13% and will drop by September to 8%. My Eq score has dropped as well a total of 18 points with 4 new credit cards left to be reported. I knew I was going to take a hit, but it's still a downer when it starts happening. I am gardening big time now, but my question is how long does it take before your score starts to rebound. The age of my credit really didn't take a hit, I have accounts that are 25 years old in excellent standing along with a paid off mortgage in 2002. Not one late pay,etc and I definitely not over extended. Any one with any experience with this situation? Thanks!

japakar wrote:
Yeah same as above poster. It may bounce up and down a bit but for anything to really stick it should take about 6 months and about a year for the other bump. (Inquiries to fall off the reporting, accounts to reach 1 year of age and all of that good stuff) Util going down may give a bump sooner though, but itll still be about a year.*edit*
Not unreasonable to ask. Some companies let you ask earlier. If its a HP, itll probably knock your score a few points for the inuqiry. Its reasonable to expect an increase if your util on individual and overall is low, no new accounts. (and no judgements/collections, sometimes those can block CLis for awhile it seems)Thanks Japakar, I have a few old inquiries coming off at the beginning of the year...will end up with 10 by then. I definitely will be able to keep utilization between 5 to 8 percent in a couple of months. I will avoid HP CLI. Absolutlely no collections always pay on time, much more than minimum and a couple of times a month. I will garden hard!

How long would it take the Apple Store to fix this common problem?

I have the 2010-2011 macbook black screen of death, some days it crashes at least 4 times a day! screen just blacks out and i have to restart. other than that everything works fine
http://oleb.net/blog/2012/05/15-inch-mbp-mid-2010-crashing-to-black-screen/
now here it says apple will fix this for free, so i scheduled a genius appointment for Monday, this guy here says apple just replaced the entire logicboard, how long should it take?
also how can Apple verify that i have the same problem? (I'm pretty sure it is the same problem)
I saved one of the error logs in a text file, maybe that should help.
Interval Since Last Panic Report: 52032 sec
Panics Since Last Report:          4
Anonymous UUID:                    A15EA0C9-0B51-413A-A168-86164B297557
Tue May 14 03:24:11 2013
panic(cpu 0 caller 0x5c223c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7ed37000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5a362188 : 0x21b837 (0x5dd7fc 0x5a3621bc 0x223ce1 0x0)
0x5a3621d8 : 0x5c223c9b (0x5c43928c 0x5c4a9800 0x5c447e60 0x0)
0x5a362278 : 0x5c33e608 (0x7fb1804 0x74ac004 0x100 0x5b8972b6)
0x5a3622c8 : 0x5c335601 (0x74ac004 0x100 0x5a3622f8 0x5c213778)
0x5a3622f8 : 0x5ca589a6 (0x74ac004 0x100 0x438004ee 0x5a362308)
0x5a362438 : 0x5c35d2b5 (0x74ac004 0x74dc004 0x0 0x0)
0x5a362478 : 0x5c22ce7c (0x74ac004 0x74dc004 0x0 0x0)
0x5a362518 : 0x5c22955b (0x0 0x9 0x0 0x0)
0x5a3626c8 : 0x5c22b58f (0x0 0x600d600d 0x702b 0x5a3626f8)
0x5a362798 : 0x5b882eae (0xc1d00048 0xbfef0033 0xbfef0034 0x857c)
0x5a362808 : 0x5b892734 (0x89f7c00 0x89f6700 0x8 0x3)
0x5a362828 : 0x5b8b7322 (0x89f6700 0xb 0x5a362848 0x2345f4)
0x5a362858 : 0x5b8b7b3d (0x89bf000 0x0 0x5a36287c 0x0)
0x5a362888 : 0x5b897d79 (0x89bf000 0x7d13f080 0x0 0x35)
0x5a3628d8 : 0x5b859d0c (0x44eb9000 0x0 0x0 0x3)
0x5a362948 : 0x5b85940f (0x44eb9000 0x0 0x2 0x3)
0x5a362978 : 0x5b84f05f (0x44eb9000 0x0 0x2 0x44ea0000)
0x5a362ab8 : 0x5b8885d8 (0x44ea0000 0x1 0x5a362bcc 0x5a362bc8)
0x5a362b68 : 0x5b84afe1 (0x44ea0000 0x1 0x5a362bcc 0x5a362bc8)
0x5a362be8 : 0x56da06 (0x44ea0000 0x0 0x5a362e3c 0x5a362c74)
0x5a362c38 : 0x56e2a5 (0x5b8d9720 0x44ea0000 0x81b3d88 0x1)
0x5a362c88 : 0x56eb59 (0x44ea0000 0x10 0x5a362cd0 0x0)
0x5a362da8 : 0x286638 (0x44ea0000 0x10 0x81b3d88 0x1)
0x5a363e58 : 0x21dbe5 (0x81b3d60 0x144c95a0 0x1fd7e8 0x5d43)
0x5a363e98 : 0x210a86 (0x81b3d00 0x0 0x845e000 0x8a391f0)
0x5a363ef8 : 0x216f84 (0x81b3d00 0x0 0x0 0x0)
0x5a363f78 : 0x295c57 (0x7ba08c8 0x0 0x0 0x0)
0x5a363fc8 : 0x2a256d (0x7ba08c4 0x1 0x10 0x920cc20)
      Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x5b83f000->0x5b8f5fff
            dependency: com.apple.NVDAResman(6.4.0)@0x5c1bd000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x5b416000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x53515000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x5b498000
         com.apple.nvidia.nv50hal(6.4.0)@0x5c922000->0x5cd36fff
            dependency: com.apple.NVDAResman(6.4.0)@0x5c1bd000
         com.apple.NVDAResman(6.4.0)@0x5c1bd000->0x5c4aafff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x53515000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x5b416000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x5b498000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 5179362147677
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 33372872098
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.31
com.apple.driver.InternalModemSupport          2.6.2
com.apple.driver.AppleIntelYonahProfile          14
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleIntelPenrynProfile          17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMikeyDriver          2.0.5f14
com.apple.driver.AppleIntelHDGraphics          6.4.0
com.apple.driver.AppleIntelNehalemProfile          11
com.apple.driver.AppleHDA          2.0.5f14
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AudioAUUC          1.57
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.driver.AppleIntelHDGraphicsFB          6.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.0.5b8
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AppleGraphicsControl          2.10.6
com.apple.GeForce          6.4.0
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.driver.AppleBacklight          170.0.46
com.apple.kext.AppleSMCLMU          1.5.2d10
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleUSBTCButtons          201.6
com.apple.driver.AppleUSBCardReader          2.6.1
com.apple.driver.AppleUSBTCKeyEventDriver          201.6
com.apple.driver.AppleIRController          303.8
com.apple.driver.AppleUSBTCKeyboard          201.6
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.1
com.apple.driver.AppleSMC          3.1.0d5
com.apple.nvidia.nv50hal          6.4.0
com.apple.NVDAResman          6.4.0
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.driver.AppleUSBAudio          2.7.6f6
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOUSBMassStorageClass          2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
com.apple.driver.AppleUSBMultitouch          207.7
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.AppleFileSystemDriver          2.0
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.TMSafetyNet          6
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9320325ASG, 298.09 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Mustang Amplifier, 0x1ed8, 0x0004, 0xfa140000 / 6
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 7
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3

It will take as long as the service department tells you it will take. We are users like you. We do not have any insight into your particular service center's backlog, staffing level, capabilities, etc. Ask them how long as they are the only ones who will know.

"How long does it take to do a dist-upgrade on your distro?"

Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
The Computer
Dell OptiPlex GX110
[jada@arch-02 ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 797.452
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
bogomips : 1596.45
clflush size : 32
[jada@arch-02 ~]$
I used the following command for the update
$ time pacman -Syu
The Test
first update pacman
[root@arch-02 jada]# pacman -Syu
warning: current locale is invalid; using default "C" locale
:: Synchronizing package databases...
core 23.8K 80.0K/s 00:00:00 [#####################] 100%
extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
community 341.0K 295.8K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
:: pacman has detected a newer version of the "pacman" package.
:: It is recommended that you allow pacman to upgrade itself
:: first, then you can re-run the operation with the newer version.
:: Upgrade pacman first? [Y/n] y
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
Total Package Size: 1.19 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
checking package integrity... done.
cleaning up... done.
(3/3) checking for file conflicts [#####################] 100%
(1/3) upgrading libarchive [#####################] 100%
(2/3) upgrading libdownload [#####################] 100%
(3/3) upgrading pacman [#####################] 100%
>>> The makepkg.conf syntax has changed, please note the new format
>>> when merging the pacnew file with your old configuration.
>>>
>>> The pacman.conf default file has changed. Please update your
>>> config to use the single mirrorlist, and any additional files
>>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
>>>
>>> The location of sync DBs has moved from /var/lib/pacman/ to
>>> /var/lib/pacman/sync/ for several reasons. To delete older
>>> DBs, please run pacman -Sc and follow the instructions.
>>> You will also have to run pacman -Sy to refresh the sync DBs.
>>>
>>> abs is no longer included; please install the 'abs' package
>>> to use abs. You may need to edit abs.conf to re-enable repos.
[root@arch-02 jada]#
restart pacman 3.1.1 and update the packages
[root@arch-02 jada]# time pacman -Syu
:: Synchronizing package databases...
core 23.8K 80.3K/s 00:00:00 [#####################] 100%
extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
community 341.0K 302.5K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
resolving dependencies...
warning: dependency cycle detected:
warning: bash will be installed before its glibc dependency
warning: dependency cycle detected:
warning: readline will be installed before its glibc dependency
warning: dependency cycle detected:
warning: ncurses will be installed before its glibc dependency
warning: dependency cycle detected:
warning: db will be installed before its coreutils dependency
looking for inter-conflicts...
Remove: mktemp mpg321
Total Removed Size: 0.08 MB
Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
nautilus-2.20.0-4 gnome-control-center-2.20.3-1
gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
zenity-2.20.1-1
Total Download Size: 743.90 MB
Total Installed Size: 748.87 MB
Proceed with installation? [Y/n]
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
:: Retrieving packages from community...
freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
checking package integrity...
(349/349) checking for file conflicts [#####################] 100%
( 1/349) upgrading ncurses [#####################] 100%
( 2/349) upgrading readline [#####################] 100%
( 3/349) upgrading bash [#####################] 100%
( 4/349) upgrading kernel-headers [#####################] 100%
( 5/349) upgrading tzdata [#####################] 100%
( 6/349) upgrading glibc [#####################] 100%
(340/349) installing wavpack [#####################] 100%
(341/349) upgrading xine-lib [#####################] 100%
(342/349) upgrading xinetd [#####################] 100%
(343/349) upgrading xkeyboard-config [#####################] 100%
(344/349) upgrading xmms [#####################] 100%
(345/349) upgrading xorg-server [#####################] 100%
:: Could not detect nvidia-utils on system
:: Will attempt to use built-in libwfb
(346/349) upgrading xorg-xinit [#####################] 100%
(347/349) upgrading xscreensaver [#####################] 100%
(348/349) upgrading yelp [#####################] 100%
(349/349) upgrading zenity [#####################] 100%
real 56m46.062s
user 4m25.013s
sys 1m46.520s
[root@arch-02 jada]#
And for your tread question.
How long does it take to do a dist-upgrade on your distro?
one hour
real 56m46.062s
user 4m25.013s
sys 1m46.520s
After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
Archlinux rocks

JaDa wrote:Archlinux rocks
definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
root@moe:~ # apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies.
E: Unmet dependencies. Try using -f.
root@moe:~ # apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following extra packages will be installed:
exim4-base exim4-daemon-light
Suggested packages:
exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
The following packages will be upgraded:
exim4-base exim4-daemon-light
2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
1 not fully installed or removed.
Need to get 0B/1391kB of archives.
After unpacking 8192B of additional disk space will be used.
Do you want to continue [Y/n]?
Preconfiguring packages ...
dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
Package exim4-daemon-light is to be removed.
Package exim4-daemon-heavy is not installed.
Package exim4-daemon-custom is not installed.
dpkg: error processing exim4-daemon-light (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
Errors were encountered while processing:
exim4-daemon-light
[ Rootkit Hunter version 1.3.0 ]
File updated: searched for 152 files, found 131
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@moe:~ # apt-get install exim4-daemon-light
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies.
exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
root@moe:~ #
It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close.

How long can it take for BT to repair a BT line?

I am concerned that I am going for some sort of record!
I have been having problems with my telephone line, there is no dial-tone and the DSL is all over the place. After checking that it was not an equipment failure on my side I logged a fault on the 9th February. Literally within hours (I was impressed) I had not one but two BT vans outside to trace the fault. They very efficiently diagnosed the problem to be a connection fault with the wire that was replaced about a year ago (the grass has only just grown back in my front garden). That was it. A week later I still had the fault, the fault web site says the ticket was closed and so I called in to 151 and was told “an engineer would be with me by 5pm that day”, they were not. So the next day I called again and was told “an engineer would be with me by 5pm that day”; fearing a bad case of deja vu at this point I asked to speak with a supervisor who was very understanding. However, basically I was told that the line is waiting for contractors to dig up the wire again and would have to wait until “next month”. How long should this take?
I am at the point where I am waiting for some undefined point in time for someone to dig a hole so that someone else can come along and fix the wire. I have been a BT customer basically since I left home, quite some years ago, this line alone I have had ADSL on since early 2001. At this point I am considering dropping everything I have with BT and switching to another provider entirely. I try to do my bit for the environment and work from home when I can, currently I either hit the environment and drive into work or it cost me on my cell phone. The only reason I have not already as I know that they would end up providing the connection over the same wire – perhaps their customer service will be better… If there was virgin cable in my street I would have switched already!

Hi AGeezer,
If the road has to be dug up then there needs to be permission granted from owner/council and of course the road must be closed etc so sometimes it can take a while to get all this arranged.
I'll be happy to keep you up to speed and let you know what's happening as the updates come through.
Could you drop me in an email please with your BT account and telephone number along with a link back to this thread.
Just send to the email address in my profile and mark FAO Craig please.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How Long Did it Take to Receive Your Replacement?

My shuffle is crapped out. I don't have phone support so I have to request service through the website. Apple says they will ship a new one to me...however, my question is:
How long will it take to receive it? Does anybody know how quickly things are shipped out?
I am going to be out of town starting Saturday and want to make sure I don't miss the delivery.
Any help?

You might be able to track it here:
http://trackmyorder.sky.com/

How long does it take to get a credit

Long story short, I ordered a projector back in decemeber and ended up not needing it. I refused the delivery as I was instructed to do by the bestbuy customer service rep I talked to. The item was received by the bestbuy warehouse at the end of december. I still have not recieved credit for the item. I have called numerous times and have had a couple of case numbers give to me. Every couple of weeks that I call i'm told that the previous person did something wrong but the person I'm talking to this time is doing it correclty and give it 10 days and I should have a credit.
Needless to say I haven't recieved the credit. The most recent converstion I had I was told that my ticket is waiting on corporate verificiation but there is no telling how long that will take.
Am I ever going to get a this credit back?

Hello babychewie,
I make most of my purchases online and as not all of them match up to what I thought I needed, making a return here and there is necessary. However, it shouldn’t ever take this long to get credited back from an order you’ve returned, especially one from such a large purchase. I know I’d be frustrated too if this happened to me, and I’m sorry for any aggravation this has caused.
When an online purchase is returned to our processing center in Findlay, Ohio, it should trigger our system to process a refund which should post to the method of payment within 7 to 10 business days. Upon review of your online order using your email address on the forum, I’ve found that while we received your projector, our system didn’t recognize it. This means your refund was never processed.
At this moment, I see that you’ve spoken with a few of our representatives regarding this and they’re working to provide you a refund in the quickest manner possible. Please know that I am keeping an eye on your case and will follow up with you via private message when I have more information. You should receive an email when the private message is sent, but you may also view it by logging into the forum and clicking on the envelope in the upper right-hand corner.
Thank you for your patience!
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

HOW LONG DOES IT TAKE TO GET iPHOTO BOOK?

I would like to order my first HARD COVER book and since I am not living in USA, my friend would bring the book back to Europe.
But the only problem is that, she will be there only two days, so the book must be at the address, she will be living on 9th of February.
When do I need to place the order? How long does it take to get the album?
Thank you for your help.

Can't say - no idea where it is going to or what will be going on them
If it were me I'd say that the extra cost was a cheap insurance policy against external forces messing things up - but you make that decision
Waiting three days to order and shipping ground rather than express will increase the chances of it not making it - probably still 95% + (guessing of course) that it will but every day you wait makes the chances less and not using the fastest shipping also increases the chances of failure
If money is the issue then ordering today rather than Wed would be a good idea to me
Good Luck
LN

How long does it take to get approval from iTunes Connect and how do I find out if they are working on it?

How long does it take to get approval from iTunes Connect and how do I find out if they are even working on it? I'm not really sure if my application was even delivered - from the links in IBA. Any suggestions how one might push the right buttons at Apple?
Also went around in a big circle trying to get beyond the confusion of not having the right Apple ID when I've had it a long time. Confusion abounds and learning this forum also takes a new degree of patience. Humbling to say the least :-)
Anyone been there done that?

[email protected]
[email protected]
…support phone number call +1 (877) 206-2092.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.

How long does it take to get the code Mountain by email ?

Hello, I bought my MacBook Pro end of June and I submitted my order form with everything attached (image of ticket and so on...). It's about one week I'm waiting for the code to download the OS X Mountain Lion...
Before I got a mail telling me the ticket was unreadable; then I resent a better image but with no results up to now.
Please someone can tell me how long this should take?
Thanks, Andrew

Just inform you that I have been waiting other few days more and I received my code to download OS X Mountain Lion.
I have downloaded and installed it: I'm enjoying it!
Thanks for support!
Andrew

Increased mailbox limit on one mailbox - How long until it takes?

Similar Messages

Maybe you are looking for