Increased time_wait on Websense systems after LB HTTP with ACE

I was wondering if anyone knew why we would see an increase of tcp sessions in time_wait status after setting up HTTP load balancing. The systems are Websense boxes that are being used both as a proxy (which the VIP is for) and with WCCP. We have 5 total systems but only 3 have been added to the serverfarm. The two that are are not in the serverfarm and not having this issue. The we are using L4 LB. So the two, non LB systems are on the client side VLAN. Any ideas?

Hi,
According to the article below:
Windows 8.1 Update for x64-based Systems (KB2919355)
http://www.microsoft.com/en-us/download/details.aspx?id=42335&e6b34bbe-475b-1abd-2c51-b5034bcdd6d2=True
1. These KB's must be installed in the following order: clearcompressionflag.exe, KB2919355, KB2932046, KB2959977, KB2937592, KB2938439, and KB2934018.
2. KB2919442 is a prerequisite for Windows 8.1 Update and should be installed before attempting to install KB2919355
Did all the client fulfil the requirement?
And if reboot is required in the KB article, we’d better reboot it and install the next.
Hope this helps.

Similar Messages

ChaRM in QA system after QA refresh with production

Hi,
After deploying ChaRM, if we refresh QA system with production server, would the projects be overwritten?
or Is there a way to perform system refresh without affecting CTS projects in QA?
Thanks and Regards,
Jamuna Nithyanandam

What do you mean with "Delta transports"? I assume, delta transports contain those objects which were not moved to production, only to QA, and therefore the are now missing in QA after system copy.
CHaRM process supports to move all changes controlled into Production, by using normal corrections (transaction type SDMI). So there should no delta transport be required. If something was in QA and not on Production, when you perfromed the system copy, you can use test transport functionality, to re-import these missing transports into QA.
Regards,
Holger Slomka

System Landscape Directory: HTTP response code: 403 (Forbidden)

Hi,
After upgrading PI 7.1 (with local SLD) Stack06 -> Stack09 we have the following error in the runtime workbench. It seems that the connection
between PI and SLD is not working:
1) error in RWB -
Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
2) another error:
8 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1 - Integration Server unable to specify a JCo client - No component names available from Integration Server - SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1
3) in the sld:
INFO com.sap.sld.api.builder.app.DefineHostedSystem: Communication exception in SLD ping (HTTP 403 = FORBIDDEN): http://hfasapxi1:50000/sld/cimom, namespace sld/active.
sldcheck is working and the users are not locked or not valid. All seems to be ok but I still get these errors.
Any idea ?
Dimitry Haritonov

Hi Venu,
thanks for the answer but it seems to be something else. After searching for that problem I also ran the configuration wizard->PI self registration. This activity registers all the component of the PI, unfortunately it only registered the "integration server" part without the Adapter engine, domain, RWB and etc.
Also, when I trigger the registration of the adapter engine I get the following error in the default trace:
The AdatperEngine has not been registered with the SLD due to: com.sap.aii.af.lib.sld.SLDException: Could not register AdapterFramework to SLD. Reason: Self-registration of instance af.xid.hfasapxi1 of class SAP_XIAdapterFramework failed
the reason is unknown ... any idea ?
Dimitry Haritonov

Job logs from the original system after Unicode conversion.

Dear Globalization experts,
We are doing Unicode conversion and would like to know, if the Job logs from the batch jobs, executed before conversion (system with a 1100 code page), would be readable in the Unicode system after the conversion. We will move job log files from the source to the target system. I . Thank you in advance for your help.
Best regards,
Alik Shapiro

Hi Alik,
I have strong doubts that this will work ...
From SAP notes 842767 and 901004 you can see, that spool data will not be converted properly by default.
In general this is valid for data stored in TemSe, as this is by definition temporary data (see for example http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/content.htm ).
However I actually did not test it, so I am not 100% sure.
Best regards,
Nils Buerckel
SAP AG

Integrating remedy system to portal - HTTPS Issue?

Hello folks,
I am integrating remedy system to portal using R/3. We are not able to consume the webservice directly from the Iview using portal services(not supporting for the remedy system). So we have created a RFM(using SOAP). Portal connects to R/3 using this RFM and R/3 connects to remedy system and returns the ticket created which is passed to the portal.
This works fine if the webservice is HTTP based but doesn't work after enabling HTTPS. Keeps giving authentiocation/HTTP communication err. Does the webservice supports HTTPS using ABAP?.They do have an option to accept HTTPS but it's not working.(Scheme 1= HTTP , 2 = HTTPS )
call method cl_http_client=>create
exporting
host = 'arsdev'
service = '8883'
scheme = '2'
importing
client = http_client.
Has anyone encountered the same problem ? Is there anyway we can consume the webservice thru' ABAP after enabling HTTPS?
Thanks,
Vikram

Hi, gurus.
I thought you have successfully configured Solman-BMC connection before?
Can you share some thoughts on it, especially where I can found decent documentation that tells step I should take. I've configured it for days, but I can't understand how Solman will pass message to Remedy and vice versa.
Do you have email or messenger so I can ask about it?
I've followed SAP guidances from service marketplace and here http://tknight.org/sdn/show/9985 but with no luck.
Thanks gurus.

Remedy system to Portal - HTTPS problem

Hello folks,
I am integrating remedy system to portal using R/3. We are not able to consume the webservice directly from the Iview using portal services(not supporting for the remedy system). So we have created a RFM(using SOAP). Portal connects to R/3 using this RFM and R/3 connects to remedy system and returns the ticket created which is passed to the portal.
This works fine if the webservice is HTTP based but doesn't work after enabling HTTPS. Keeps giving authentiocation/HTTP communication err. Does the webservice supports HTTPS using ABAP?.They do have an option to accept HTTPS but it's not working.(Scheme 1= HTTP , 2 = HTTPS )
call method cl_http_client=>create
exporting
host = 'arsdev'
service = '8883'
scheme = '2'
importing
client = http_client.
Has anyone encountered the same problem ? Is there anyway we can consume the webservice thru' ABAP after enabling HTTPS?
Thanks,
Vikram

Hi, gurus.
I thought you have successfully configured Solman-BMC connection before?
Can you share some thoughts on it, especially where I can found decent documentation that tells step I should take. I've configured it for days, but I can't understand how Solman will pass message to Remedy and vice versa.
Do you have email or messenger so I can ask about it?
I've followed SAP guidances from service marketplace and here http://tknight.org/sdn/show/9985 but with no luck.
Thanks gurus.

Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interfa

Hi
i am try do
Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface
With The help of SDN Contribution
link----
( have look on it)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
I am getting error in
Partner system as HTTPLOG and "Execute" to check the results
Error is -- Port could not be created
RFC destination HTTPLOG Not specified for system HTTPLOG
any 1 have any idea if plzzzzzzzz...........
Thank u
Ram

Hello .
we are also in process of implementing the same
could you share the knowledge pl?
1)is it a separate add on with ALE to saphr
or using ECC ??
2)can u share the configuration part ??
we are trying it on webas as addon 3.0 .

After installing HTTP server..

Hi all,
After installing http server on linux in a diffrent oracle home. My Enterprise manager dbconsole is not starting I am getting following error. Please help me.
$ tail -10 emdctl.trc
2006-10-30 16:20:52 Thread-4136076976 ERROR http: snmehl_allocateListenerPort: f
ailed to bind socket: Address already in use (errno=98)
2006-10-30 16:20:52 Thread-4136076976 ERROR http: nmehl_startHttpListener: faile
d to listen to HTTP port for http://localhost:3938/emd/main
2006-10-30 16:20:52 Thread-4136076976 ERROR main: nmehl_startHttpListener failed
starting http listener
[oracle@localhost log]$ tail -1 emdctl.trc
2006-10-30 16:24:06 Thread-4136560304 WARN http: snmehl_connect: connect failed
to (xxxx:1158): Connection refused (error = 111)
[oracle@localhost log]$ tail -10 emdb.nohup
----- Mon Oct 30 16:21:22 2006::Restarting DBConsole. -----
----- Mon Oct 30 16:21:22 2006::Console Launched with PID 21394 at time Mon Oct
30 16:21:22 2006 -----
06/10/30 16:21:25 Error starting ORMI-Server. Unable to bind socket: Address al
ready in use
----- Mon Oct 30 16:22:53 2006::EMAgent exited at Mon Oct 30 16:22:53 2006 with
return value 55. -----
----- Mon Oct 30 16:22:53 2006::EMAgent has exited due to initialization failure
----- Mon Oct 30 16:22:53 2006::Stopping other components. -----
----- Mon Oct 30 16:22:53 2006::EMWD Stopping DBConsole. -----
--- DBConsole internal stop. No OC4J admin passwd hence hard stop. ---
----- Mon Oct 30 16:22:53 2006::Commiting Process death. -----
----- Mon Oct 30 16:22:53 2006::Exiting watchdog loop -----
An other issue is the http server is not starting and getting following error.
/app/oracle/product/10.2.0/companion/Apache/Apache/bin/httpd: error while loadin
g shared libraries: libdb.so.2: cannot open shared object file: No such file or
directory
Thanks,
Message was edited by:
james@

James,
The key parts in that output are -
2006-10-30 16:20:52 Thread-4136076976 ERROR http: snmehl_allocateListenerPort: f
ailed to bind socket: Address already in use (errno=98)
2006-10-30 16:20:52 Thread-4136076976 ERROR http: nmehl_startHttpListener: faile
d to listen to HTTP port for http://localhost:3938/emd/mainThey are telling you that it could not bind to that particular port number (port 3938) because something else is already bound to it.
Try (as root) -
/usr/bin/lsof -i TCP:3938which should show you information about the process(es) that are currently listening on that port.
As for -
/app/oracle/product/10.2.0/companion/Apache/Apache/bin/httpd: error while loadin
g shared libraries: libdb.so.2: cannot open shared object file: No such file or
directorylibdb is a prerequisite of installing the Apache server, I believe you can get the library as part of the Berkeley DB installation/rpm's/packages (it should be listed in the installation document).
Hope this helps.

Need to enter invoice and payment in the system after a manual check issued

Client Need to enter invoice and payment in the system after a manual check is issued for some urgent transactions.
Please suggest few ways to do this .

Hi,
If client can maintain a separate check book sequence for manual issue, we can configure a separate payment document with the same sequence and later record the invoice and generate payment ....
Regards,
Ivruksha

How to adjust logical system after coping PRD to QAS in tabels

Hello
I wonder how to adjust logical system after coping PRD to QAS in tabels. I know (the logical system changes) but there is a transaction which adjustes entries in tabeles...

>
Tina Tajnist wrote:
>...but there is a transaction which adjustes entries in tabeles...
SE14

Missing file system after installing in SSD

Missing file system after installing in SSD MacBook
Hi All
I recently installed a SSD drive in my Macbook, I used the Disk Utility to clone the old HDD.
When i reboot the machine with the new disk I get the image of a folder with question mark.
If i reboot the machine again and hold the alt key at the chime I can see two disks.
One called SSD and another called Recovery.
if i choose the SSD the OS starts as normal and if i choose the recovery option and check the disk with disk utility
it tells me that everything is fine.
Any ideas how i can make the machine boot as it should without having to hold down the alt key a start up??

Hi i tried this and just got the big symbol of doom at start up.
However, a little terminal witchcraft did the trick!
sudo bless -mount /Volumes/"Macintosh HD" -setBoot

No PO Created in backend system after Bid is accepted

We are on SRM 4.0. using Classic Scenario
We can create a bid invitation in SRM and we have used the BADI - BBP_DETERMINE_LOGSYS to indicate to the system to create a purchase order in the backend system after the bid is accepted. We keep getting the following error in SM21: Purchase orders cannot be created without IPC pricing
Did you have to turn on the IPC in order to create the purchase order in R/3? Also, if you have used the BBP_DETEMINE_LOGSYS Badi and have example code that might be helpful as well.
If anyone has some useful BID INVITATION configuration document or tips that will be appreciated. email id is [email protected]
Thanks,
Ashwani

Hi,
The BADI is used in case of Backend contract creation.Please read the documentaion of the BADI carefully.
You can use the Business Add-In BBP_DETERMINE_LOGSYS to define your own
criteria for determining the backend system / company code. You use thi
BAdI to determine the source system for
o   Shopping cart items
    In the standard system, the backend system is determined using the
    product category Define Backend Systems. The backend System is
    placed in the field ITEM_DATA-LOGICAL_SYSTEM. Then the system calls
    the Business Add-In BBP_DETERMINE_LOGSYS.
    The company code is put in the field ITEM_DATA-BC_CO_CODE. Then the
    system calls the Business Add-In BBP_DETERMINE_LOGSYS.
o   Contracts
    In the standard system, the system creates contracts locally from
    Sourcing and SAP Bidding Engine You can use this BAdI to determine
    backend system.
Example
Shopping Cart:
Backend system A is determined for product category OFFICEMATERIAL. You
also want to consider the vendor and purchasing organization fields
during determination of the backend system. The purchase order is to be
created in backend system B for the vendor OFFICE1 and purchasing
organization 0001. You overwrite the field ITEM_DATA-LOGICAL_SYSTEM wit
B.
Contract:
The local system used by the standard system to create contracts is
XYZ4711. In the field CV_LOGSYS, you enter the logical system ABC0815
that links to a backend system. In this way, contracts are created in
the backend system.
Sample codes for the BADI:
method IF_EX_BBP_DETERMINE_LOGSYS~DETERMINE_LOGSYS.
data: w_acct_data type enriched_acct_data.
data: w_acct_icom type BBP_PDS_ACC_ICOM.
data: w_et_messages type BBP_TMESSAGES_BADI.
data: re_obj(40).
data: imkey(8).
field-symbols: <waItem> type bbp_oci_enritem.
field-symbols: <waAcct> type bbp_oci_enracct.
field-symbols: <f1> type any.
if not acct_data[] is initial.
loop at item_data assigning <waItem>.
loop at acct_data assigning <waAcct> where line = <waitem>-line.
check <waAcct>-acc_cat = 'RE'.
if not <waAcct>-acc_str is initial.
CALL FUNCTION 'Z_RE_ACCT_ASSGN'
EXPORTING
ACC_STR = <waAcct>-ACC_STR
BUKRS = <waItem>-BE_CO_CODE
IMPORTING
RE_OBJ = RE_OBJ
IMKEY = IMKEY
TABLES
BBP_RETURN = w_et_messages.
endif.
if not imkey is initial and w_et_messages[] is initial.
move imkey to <waAcct>-rl_esk_key.
move re_obj to <waAcct>-acc_str.
modify acct_data from <waAcct>.
endif.
endloop.
endloop.
endif.
endmethod.
OR
method IF_EX_BBP_DETERMINE_LOGSYS~DETERMINE_LOGSYS.
data: ztprod type zprod1.
data result(4).
data tline TYPE LINE OF bbpt_detlogsys_item.
loop at item_data into tline.
   case sy-uname.
      when 'BUYER3'.
         if tline-product eq '69E2D3C8AF4B5C4CBDCC73A50C58EFA2' or
           tline-product eq '6BB856ADA25D584FA0B5A2FDCDA27766' or
           tline-product eq 'F31AD68E8EDCE646A9C7ECC4F24CE464' or
           tline-product eq 'ABC0320E1A37E743B75406DF0B7C53BF' or
           tline-product eq '3C0665006B2D2A43B3A1CC74B560E8A9' or
           tline-product eq '8F97635441496647A69CD021A5FFF4D2'.
           tline-be_co_code = '1000'.
           tline-logical_system = 'F47CLNT800'.
           tline-BE_PUR_ORG = 'O 50000660'.
           tline-BE_PUR_GROUP = 'O 50000662'.
           modify item_data from tline.
         endif.
      when others.
           select single * from zprod1 into ztprod where product eq tline-product.
           if sy-subrc eq 0.
             tline-be_co_code = '3000'.
             tline-logical_system = 'F47CLNT800'.
             modify item_data from tline.
           elseif tline-product is initial.
             tline-be_co_code = '3000'.
             tline-logical_system = 'F47CLNT800'.
             tline-BE_PUR_ORG = 'O 50000612'.
             tline-BE_PUR_GROUP = 'O 50000614'.
             modify item_data from tline.
           endif.
   endcase.
endloop.
endmethod.
Also if you have activated "EXTENDED CLASSIC SCENARIO"( SPRO>Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Activate Extended Classic Scenario),then IPC is mandatory for ECS .
BR,
Disha.
Do reward points for useful answers.

Automatic logout in SAP System after Pressing Confirm button

Dear all,
We have Stock confirmation Transaction(ZTransaction) coming from SAP System through ITS. Our Issue is When user click on Confirm button in that transaction, background process will run. It is more like running Replenishment in ICH. Then user will be able to see the order pager after 45 min,after pressing Stock confirmation button. but the user is still alive in backend system, this will causing load on the backend system. So want to set automatic logout from that system after pressing confirm button in that transaction.
Can anyone help me or guide the logic to implement in ABAP Program.
Note: User will access this Transaction through Portal.
Rgds
PRadeep

Dear all,
There are two function modules are available...they are as follows.
TH_DELETE_MODE(Session will delete)
TH_DELETE_USER( Total login will delete)
Rgds
PRadeep

Test System (BQ1) Objects showing up wrong Source System after Transport.

Hi Experts,
We are working on IS-U BI7.0 Project. We have finished with our Development and have transported the DataSources, Transformations and DTPs from Development (BD1) into Test (BQ1) Systems.
We have entered values in the Conversion of Logical Source Systems correctly.
When we select the DataSource and Click Object Directory Entry from the Extras Menu, we found that the Original Source System is defined as BQ1 instead of BD1 (Development System), which is where the Object is getting Transported from.
We have implemented an SAP Note:1008633 (Incorrect Source System after Transport (RSTRAN 514) but couldn't resolve the issue.
We basically want all the Objects in the BQ1 (Test System) showing the Original Source System as BD1 (Development System) but only the DataSources and it's connected Transformations and DTPs are originating from the BQ1 (Test) System itself (The Transformations when Transported from BD1 to BQ1 are Transported with a different Technical Name which is very strange).
Had anyone faced similar problem and if so, what was the effective solution implemented.
Any help in this regard is very much appreciated.
Thanks in Advance.
Best Regards,
Chandu.

It is resolved by our Basis.
Thanks,
Chandu

Deletion of source system after an upgrade : consequences ?

Hello,
I'm a sap basis guy.
We have a SAP BI 701 sytem mapped to our 4.7 Non Unicode source system.
I have now perfromed the unicode migration and upgrade to ECC6 of the source system on another server.
It means now, that I have two sourtce systems with exactly the same SID, and logical name.
Sicne the BI connexion in RSA1, is based on the logical system name , I have no ther choice than delete the old
source system, and recreate it with the same logical name but different connexion parameters (hosts, ...) and differentversion (
I have talked with the BI team, but thnigs are quite unclear about the consequences of deleting a source system in RSA :
Do all Transformations/ Transfer Rules between DataSources and targets are deleted ?
Does it mean that they have to be manually recreated after the new source system has been recreated ?
Is there any workaround ?
Thank you in advance for your help.
Regards.

Hello,
If you do not save the source system dependent objects to a transport request before you delete the connection then the objects will be lost , you can avoid this by saving the objects to a transport request and then release the transport before you delete the connection and import it in the new system, the steps in general are below:
RSA1
Transport Connection
Button 'Collection mode' set to 'start manual collection'
Press 'Source system assignment' button (it's the one left of the
'Request BEx' button)
Select the source systems you want to save the transfer rules for
Continue
Button 'Grouping' set to 'Save for system copy'
At the left border click on 'Object Types'
Extend tree 'Source system' LSYS
Double click on 'Select objects'
Select the source systems you want to collect objects for
the source system is now displayed in the right box
Press collecting button ('gather dependent objects')
this may take a while
Right click on the root of the tree and select
Transport all below
Expand the whole tree and check if there isn't an object which is locked
by an other open transport request !!
(the column 'Transport request' has to be empty (BEFORE deleting the corresponding source system
connection!)
Best Regards,
Des

Increased time_wait on Websense systems after LB HTTP with ACE

Similar Messages

Maybe you are looking for