Increasing Maximum No. of Articles in Promotion

Dear All
I am basically a SD consultant and quiet new to Retail environment
Presently with one of our client in tcode VBG1 the max no of articles in a promotion no is restricted to 990
If the no goes above 990 then we have define them as another promotion
Is there any way out in standards to increase the limit to more than 990
Also provide me some good links where i can have a good knowledge on the Retail process both MM part and Mainly SD part like Promotions,bonus buys and sales price calculation and all
Thanks to all
Regards
Raja

Hi Raja,
You are creating a artricle group in VBG1 for Bonus buy..not for promotion.You need to create one more article group.
Check these links
http://help.sap.com/erp2005_ehp_03/helpdata/EN/9e/36a3eaf8cd11d2ae03080009d2232d/content.htm
Regards,
Kumar.

Similar Messages

Maximum amount of articles in a folio?

Hi
I'm designing a portfolio of work that will have quite a few articles. I'd say probably about 20+. Is there a maximum amount of articles you can have in a folio?
Also, is there a restriction to the size of files when uploaded to use as apps?
Thanks in advance
Steve Chapman

Steve,
As far as size, Apple does have a limit of 2GB per app. I don't know if there is any size limit in viewer apps though.
The largest app I've ever published came in at just under 1.2 GB. And while I strong recomend against ever getting that large, the app still works, and was still accepted.
-Scott

I've a Single Folio app with 1526 articles. Its there a maximum number for articles per Folio?

Helo! I've created a Single Folio app with 1526 articles.
It works in the generic Adobe Content Viewer, but does not work on my custom App.
It shutdowns after splash window.
Could someone help me?
Elismar

Changing settings? What part of setting?
My guess is that if you have so many articles, and each article need some particular files in the .folio file, then the Viewer make a mistake trying load all files in the same moment, causing auto shutdown. And, I'm using the iPad 3 to test it.
So, would be fine if someone could give me numbers about the maximum number of articles suggested to put in a Folio Issue.
And yes, I'm publishing the Bible!
Elismar

Increased maximum number of open cursors

I'm using JDBC with oracle. And I need to send many transactions to database.
I use Statement.executeQuery("INSERT INTO ..............") and so on!
But after 300 transaction Oracle send me an error that "increased maximum number of open cursors." How to increase the max number of that cursors or how to close them??
Thanks in advance!

1. Use, PreparedStatement instead of Statement.
2. Use addBatch() and executeBatch() methods.
3. Don't create statement objects in a loop, just create one object outside the while (or for) loop and use the same object again and again. Most probably the problem may be due to creating excessive object in a llop.
Hope this helps.
Sudha

Increasing maximum number of Logical Processors in a Processor Group greater than the default (64)

Can the maximum number of Logical Processors allowed in a Processor Group be increased by Bcdedit command or registry key to a number greater than the default (64) to allow non-group-aware applications to seamlessly scale via multithreading across more cores
MSDN documents methods to reduce the max number of LP's in a Processor Group to 1 or any power of 2 less than 64 in order to increase the number of Processor Groups. But there is no discussion of how to increase the maximum number of Logical Processors
allowed in a Processor Group to a number greater than the default (64), e.g. to 128 or 256.
Since a non-group-aware application/process can only run on 1 Processor Group, increasing this limit is needed to allow non-group-aware multithreaded applications to scale seamlessly for parallel computation across more than 64 cores simultaneously on systems
with more than 64 cores (for example, a quad-socket Intel Xeon system with 24 cores per socket, including true and hyper cores). If that limit can be set via registry key or command line, or if there is another way to force all the cores on
all 4 sockets (4 NUMA nodes in this case) to join in 1 Processor Group, then non-group-aware applications will not need to be rewritten using group-aware thread-affinity APIs.

Hi John,
Are you trying to specify a static NUMA-node-to-group assignment, rather than letting Windows dynamically assign NUMA nodes to groups at boot time? If yes, You can refer the
following related KB:
How to manually configure K-Group assignment on multiprocessor machines
http://support.microsoft.com/kb/2506384
Systems with fewer than 64 logical processors always have a single group, Group 0. On systems with 64 or fewer processors, existing applications will operate correctly without
modification. Applications that do not call any functions that use processor affinity masks or processor numbers will operate correctly on all systems, regardless of the number of processors. To operate correctly on systems with more than 64 logical processors,
the following kinds of applications might require modification:
•Applications that manage, maintain, or display per-processor information for the entire system must be modified to support more than 64 logical processors. An example of
such an application is Windows Task Manager, which displays the workload of each processor in the system.
•Applications for which performance is critical and that can scale efficiently beyond 64 logical processors must be modified to run on such systems. For example, database
applications might benefit from modifications.
•If an application uses a DLL that has per-processor data structures, and the DLL has not been modified to support more than 64 logical processors, all threads in the application
that call functions exported by the DLL must be assigned to the same group.
By design, a non-NUMA computer is considered to have one NUMA node. Because NUMA nodes cannot span groups, the system creates a node for each group after you restart the computer.
The related KB:
Processor Groups
http://msdn.microsoft.com/en-us/library/windows/desktop/dd405503(v=vs.85).aspx
More information:
Uneven Windows Processor Groups
http://blogs.msdn.com/b/saponsqlserver/archive/2011/10/08/uneven-windows-processor-groups.aspx
Boot Parameters to Test Drivers for Multiple Processor Group Support
http://msdn.microsoft.com/en-us/library/windows/hardware/ff542298(v=vs.85).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to increase maximum no. of hits in F4

Hi Experts,
I have a client requirement as to increase the maximum no. of hits in F4 search.
Client wants it to become 5000 as default instead of 500.
Would you please let me know if this is possible?
And how to do this change in the system?
Thank you.
Chetan Barokar.

Dear Friend,
THERE IS NO ABAP DEVELOPMENT REQUIRED HERE.
Your requirement can be fullfilled thru changing standard settings.
Login to SAP. Click on Help (From Menu bar).
Here go to the Settings option.
Here select F4 Help Tab.
Here you have option to set Max. number of Hits. The default SAP is 500 you can change it to 5000 or 9999.
Hope this helps...
Thanks,
Jignesh Mehta

UCM 11g - Increase maximum size of metadata?

Hello
Can someone please provide the steps to increase the maximum number of characters for metadata?
I see there is a thread for 10g that warns against performance issues: http://forums.oracle.com/forums/thread.jspa?threadID=2154981&tstart=0
Are the steps the same? If so, where do we add that variable in 11g?
-Mitch

Yes, Yes (see here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10726/c06_core_ref.htm#i1068045), and search for config.cfg, it should be located at IntradocDir/config/config.cfg

Maximum number of articles in one folio

Hi,
is there a maximum of the number of articles a folio can contain? I can't import any article after I've imported 18 acticle. I need 27 in my folio.

I've got a folio with 31 articles, some of which include audio, video and other interactive overlays.
Why can't you import any more? Are you stopped by an error message or something?

How to increase maximum input length of a short text object in SE63

Hi All,
In se63 translation transport when a object name is provided for short text translation, fields like technical information, modified/ Decision Required and maximum input length are displayed, how can maximum input length of a text can be increased if we want to enter more characters than specified in the maximum input length field.
Regards,
Shruthi

Increase the length of the source field, which you are translating..
Cheers!
Mishra

N96 increase maximum camera recording time?

Hi
All this is my first post on this forum. I have a N96 and have a question that i hope somebody will beable to help me with. With the N96 you can record a maximum of one and a half hours of continuos video recording. My question is is there anyway that this can be increased?
thanks for your help
mohammed

Hi
My 16gb memory on my n96 has still got 10gb on it but the camera still says 1hr 30 mins recording is there any way this can be increased maybe a hack or something

Installing 64 Bit OS to increase maximum RAM

My laptop model is Satellite P205-S8811. [Intel Core2Duo PC2-5300 667] It came with Vista Home Premium 32 Bit.
When I bought it, it came with 3GB RAM and the specifications said that it was upgradeable to a maximum of 4GB RAM. I didn't understand much about 64 Bit capability at the time.
I've already checked and learned that my processor does have 64 Bit capability.
My question: Is it true that if I install Vista 64 Bit or W7 64 Bit, it will increase my maximum RAM capacity from 4GB to 8-16GB?
Or is there something that could possibly prevent it from going over 4GB?
I just want to know before I go and buy a 64 Bit OS. If it won't go over 4GB, then buying it would not be worth it to me.
Thanks in advance.

Maximum that it can take is 4GB according to its detailed specs
http://cdgenp01.csd.toshiba.com/content/product/pdf_files/detailed_specs/satellite_P205-S8811.pdf
Sorry for the bad news.

How to increase maximum buffer memory on MSI Z87-G45 Gaming,s1150?

good day,
is there a way to increase the maximum buffer memory for PCI-E X16 ports? e.g. a bios setting that allows this?
here are my specs:
- 2 x XFX HD7950 Double Dissipation (FX-795A-TDFC)
- MSI Z87-G45 Gaming,s1150
- Intel Core i3-4130,s1150
- 1 x TNAV6R00 Corsair RM1000 (Gold standard)
- ICIDU Value DDR3 1333 (2x4GB)
- Windows 7 Home Premium 64Bit

perhaps I can be a bit more specific regarding my problem
I am using above described rig for mining purposes. One of the related performance variables is 'thread concurrency' (CGMINER). it is currently set to value 8192, corresponding to about 512mb of buffer memory for the PCI-E ports. I can not increase it, as i get the error that the system is out of buffer memory. Thing is, the system should have a lot more. The PCI-E cards hav 3GB each and my system ram is 2x4GB.
one relate variable I am already using is the following command line
setx GPU_MAX_ALLOC_PERCENT 100
this usually solves above problem, but not in this case...
anybody got any ideas?

How to increase maximum size of contentID /dDocName?

Hi,
In our project requirement we have to create contentID based on few fields in some cases they are exceeding the max limit of contentID (i.e., 30). Is there any possible way to increase the max size of content id to 100? please let me know the possible ways...
We are presently using UCM 10Rg3 version.
Thanks in advance

You would be better off creating a new metadata field of whatever size and storing your required value in that. If you really want to muck with the dDocName (I strongly recommend you don't) there are several database tables that need to be modified directly... you'll need an Oracle consultant to figure all that out.

How to increase maximum channel count?

Hi,
i have a big problem with my director app.
I create for a game(dots and boxes) 300 objects by using a
parent skript. Each generated Sprite takes his own channel. But
director offers only 150 channels so i can only add 150 Sprites.
Does anybody have an idea to increas the maximum channel
count.
-- Edit
Oh, sorry. I have found the option in the settings. 1000 is
the highest.

modity>movie>properties
In the property inspector at the movie tab there will be an
entry for
channels. Change this number.
Craig Wollman
Word of Mouth Productions
phone 212 928 9581
fax 212 928 9582
159-00 Riverside Drive West #5H-70
NY, NY 10032
www.wordofmouthpros.com
"megabook" <[email protected]> wrote in
message
news:e80f92$7h9$[email protected]..
> Hi,
> i have a big problem with my director app.
>
> I create for a game(dots and boxes) 300 objects by using
a parent skript.
> Each
> generated Sprite takes his own channel. But director
offers only 150
> channels
> so i can only add 150 Sprites.
>
> Does anybody have an idea to increas the maximum channel
count.
>
>

Way to increase "MAXIMUM UPTIME PROCESSES" during preprocessing phase

Hi All,
It has always been frustrated when your ACT_UPG, SHADOW_IMPORT_INC phases are running very slow due to low number of MAX UPTIME PROCESSES enter earlier.
I've been looking for a method to increase MAX UPTIME PROCESSES during upgrade, or shadow instance creation, but to no avail and guru here said there's no way to amend the Uptime Processes after you input the value during the preparation phase, but just to wait until it finish.
However, i found out this can be done by changing the value for parameter mainimp_proc in *.TPP files (located under EHPI\abap\bin). eg of *.TPP files to be changed are based on the *.ECO located under EHPI\abap\tmp)
For instance:
youu2019ll see below command in TPAPP.ECO file:
EXECUTING D:\usr\sap\EHPI\abap\exe\tp.exe pf=D:\usr\sap\EHPI\abap\bin\SHDUPGIMP1.TPP
Therefore, you can increase the number of UPTIME processes by changing the value mainimp_proc in SHDUPGIMP1.TPP
In order to change this, first, you need to kill the R3trans processes, and SAPehpi will prompt you the error message. take this opportunity to change the parameter. Make a backup before you change any files.
To maintain consistency, i think is good to amend parameter mainimp_proc in every *.TPP based on the time it created when you launch the EHPI. Because, SAPEHPI will generated the value you enter into *.TPP file base on the global template. Also, check on every *.ECO file in /tmp for each phase to determine what *.TPP file is being read.
example of .TPP files:
SHDUPGIMP1.TPP, SHADOW.TPP, DEFAULT.TPP, TOOLIMPM.TPP, TOOLIMPI.TPP, and etc
For your information, it is not recommend to change the processes during the upgrade and you should bear your own responsibility. The purpose of this post is just for sharing.
For my situation, my colleague has insert value "2" for MAX UPTIME PROCESSES and it's veryslow due to only 2 R3trans is running and the clock is ticking for us. I change the parameter to "6" after some analysis done how EHP read the value. The good news is i can see 6 R3trans are running and 6 Support Packages are importing in /EHPI/abap/tmp.
Time it takes to complete had shortened tremendously and upgrade completed without any error.
Please provide any feedback on how it works if youu2019ve tried it or going to try it in future.
Thanks,
Nicholas.

> Please provide any feedback on how it works if youu2019ve tried it or going to try it in future.
Just to throw in my EUR 0.02:
In most cases you do an upgrade not only one on a production system but also before on a test system - or at best - on a copy of the production.
At the end of the upgrade you get an UPGEVAL.XML file that lists the runtime of the various phases and also the configuration.
For such huge upgrades ('real' upgrades or e. g. EHP4) we do this upgrade several times with copies of the production (3+ TB database) and try to optimize the runtime for us plus avoiding most of the errors during activation and upgrade phases. For our EHP4 project I did a total of 6 upgrades in a copy of the production to find the optimum number of processes. This implies however, that resources are available (in sense of time and hardware) but we found out from the past, that this invest is of much more use than having a trembling administrator on a sunday evening sitting there and hoping that there'll be no restore of the database necessary.
With todays database and/or storage technologies (snaphots/clones) it's no more a big administrative task to copy a system and reset it after the upgrade and start over if it was too slow.
Out of my experience I would say, that I'd set the parameters always as high as the number of CPUs you have on the server executing the upgrade process, it's very rare that the machine comes to its CPU limit with nowadays CPU power, even if there's the production running.
Markus

Increasing Maximum No. of Articles in Promotion

Similar Messages

Maybe you are looking for