Increasing nsslapd-sizelimit does take effect for iPlanet 5.0SP2

[Default] nsslapd-sizelimit: 2000
Stopped the Directory server
Increased nsslapd-sizelimit to 200000.
Restarted the Directorey server
I have a client that is trying to read the LDAP repository
anonymously. I can obtain the first 2000 entries but get sizelimit exceeded from LDAP after that. The client is DataJunction, a tool that allows conversion between different types of data.
What other parameters do I have to change so that I can do a search larger then 2000 and extract all entries from LDAP. I currenly have 20,000 entries and wish to extract them to a flat file after come conversion.
Thanks,
kamlesh

Yes, it is possible to configure Directory Server to have no size limit.
If the client applications are not able to read fast enough the data returned by the server, it is possible that the time limit will be reached.
It is also possible to tune the time limit (and make it unlimited). I would not recommend this as there is a serious impact on the overall server performances, and its ability to serv mulitple clients properly.
Note that Directory Server 5 supports user based limits which allow to specify different limits for specific users.
Please read the Administration Guide for more information.
Regards,
Ludovic.

Similar Messages

How long does purchasing storage take effect for ipad, how long does purchasing storage take effect for ipad?

I just purchased more storage space for my ipad mini. How come it hasn't taken affect yet? How long does it take for me to see the storage that I purchased?

There is a warning notice when the process first starts that it may shut down, and, if so, to wait some long time (30 or 60 seconds; I forgot just which) before powering up. Sometimes they reboot, and sometimes not. But in any event, you probably went through more than one reboot, and passed the firmware test.
Enjoy your MacBook Air!

How to add system-wide preferences in RHEL that will take effect for all profiles.

I have used the following docs to try to accomplish my task:
https://developer.mozilla.org/En/A_Brief_Guide_to_Mozilla_Preferences
https://developer.mozilla.org/en/Automatic_Mozilla_Configurator/Locked_config_settings
I wish to add proxy settings for all users, including those who already have profiles. I have tried adding to greprefs/all.js directly, using a mozilla.cfg file, all exactly as in the documents. But none of these things make a difference. Any more quidance would be SO appreciated!
I am using the latest RHEL5.5 and 3.6.13.

Thanks for your quick response!
I am trying the unencoded mozilla.cfg, adding these 2 lines to my all.js:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "mozilla.cfg");
Here is my top-level mozilla.cfg:
//BEGIN CE prefs
// Proxy config
defaultPref("network.proxy.autoconfig_url", "http://10.10.10.10:8080/");
defaultPref("network.proxy.backup.ftp", "");
defaultPref("network.proxy.backup.ftp_port", 0);
defaultPref("network.proxy.backup.gopher", "");
defaultPref("network.proxy.backup.gopher_port", 0);
defaultPref("network.proxy.backup.socks", "");
defaultPref("network.proxy.backup.socks_port", 0);
defaultPref("network.proxy.backup.ssl", "");
defaultPref("network.proxy.backup.ssl_port", 0);
defaultPref("network.proxy.ftp", "10.10.10.10");
defaultPref("network.proxy.ftp_port", 8080);
defaultPref("network.proxy.gopher", "10.10.10.10");
defaultPref("network.proxy.gopher_port", 8080);
defaultPref("network.proxy.http", "10.10.10.10");
defaultPref("network.proxy.http_port", 8080);
defaultPref("network.proxy.no_proxies_on", "localhost, 127.0.0.1, cos.net, utmc.utc.com, doc, doc-test, scroll, scroll-test, scroll-dev, gumby, casey, crib, asic, topsweb, spiderweb, spiderweb-test, ouray, ouraydev");
defaultPref("network.proxy.share_proxy_settings", true);
defaultPref("network.proxy.socks", "10.10.10.10");
defaultPref("network.proxy.socks_port", 8080);
defaultPref("network.proxy.ssl", "10.10.10.10");
defaultPref("network.proxy.ssl_port", 8080);
defaultPref("network.proxy.type", 1);

HT5024 It states that it takes 24hrs for changes to come into effect. However, what does it mean that it may retains my review in the system indefinitely, so if I rate it 1 star by accident, and changed it to rate 5 stars, the 1 star rating is not removed

It states that it takes 24hrs for changes to come into effect. However, what does it mean that it may retain my review in the system indefinitely? So if I rate it 1 star by accident, and changed it to rate 5 stars, the 1 star rating is not removed?

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

How long does it take for new security questions to take effect?

I am trying to make an in-app purchase from my iPhone, and forgot my security questions. So I went and changed them so that I could input them on my iPhone to make the purchase. Having saved the security questions, the new ones are not appearing when I go to make the purchase now. Ive saved the security questions multiple times, and they still have not changed. Also signed out and back into my account on my iPhone hoping the changes would take effect.

Hi pinkiepie! Welcome to the Verizon Wireless family. Hopefully by now, you've discovered that when your old phone stopped working, your new Verizon Wireless phone was already up and running. A port from another wireless carrier usually takes between 5 minutes and 24 hours to complete, depending on the carrier and the accuracy of the information submitted. During the process of the port, you'll be able to make calls right away from your new Verizon Wireless phone but you will not be able to receive calls. Once the port is finished, the service on the old phone will completely shut off and the new phone is ready for full activation and you'll be able to place and receive calls successfull. In case you're curious, here's a link to more FAQs about Local Number Portability: http://bit.ly/QTARox
Enjoy your new phone and service. Have a wonderful day!
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Data in cell does not take effect immed

Hi I have JTable with all cells editable.
Problem is when user click on a cell and enter the data. That data does not get immediately take effect in table model unless user click on some other cell.
How can i make data immediately available when for example user click on Change button and user does not have to click on any other cell.
eg...row has 4 columns.....123....456....date....date
if user changes 123 to 321...and click on CHange button i have in panel. ..it does not take effect.....user has to click on some other cell ie eg 456 cell.....then press Change button.

in preparetable where i set the model, create columns, set renderer and editors. I even tried at the end of that method..ie added this line....still did not work....please help
public void prepairLnnTable() {
    lnnTableModel = new CellSiteLNNTableModel();
    lnnTable.setModel(lnnTableModel);
    lnnTableModel.addColumn("AAA");
    lnnTableModel.addColumn("BBB");
    lnnTableModel.addColumn("Effective From");
    lnnTableModel.addColumn("Effective To");
    ccpd6.setAllowedCharacters("0123456789");
    ccpd7.setAllowedCharacters("0123456789");
    for(int k = 0; k < lnnTableModel.getColumnCount(); k++) {
      TableColumn col = lnnTable.getColumn(lnnTableModel.getColumnName(k));
      DefaultTableCellRenderer textRenderer = new DefaultTableCellRenderer();
      JTextField textColumn = new JTextField();
      TableCellRenderer renderer = null;
//      TableCellEditor editor = null;
      if(k == CellSiteLNN.AAA) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd6);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.BBB) {
        renderer = textRenderer;
        DefaultCellEditor editor = new DefaultCellEditor(textColumn);
        editor.setClickCountToStart(1);
        col.setPreferredWidth(25);
        textColumn.setDocument(ccpd7);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_FROM) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      if(k == CellSiteLNN.EFF_TO) {
        renderer = new DateCellRenderer();
        TableCellEditor editor = new DateCellEditor();
        col.setPreferredWidth(180);
        col.setCellEditor(editor);
      col.setCellRenderer(renderer);
//      col.setCellEditor(editor);
lnnTable.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);
dFormat.setTimeZone(TimeZone.getDefault());
dFormat.setLenient(false);
}

My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

Yes it does, although I wa a minute faster than you. To see if someone is parroting you, or that they just posted at the same time, look at the head of the post and it will show you the data and time of the post and who they were responding to. Looking at that first saves some misinformation in future posting.
You'll see some posts where there will be 5 posts all in the same minute sometimes. Answer posts late at night and you won't see as many.
BTW, I clicked the Like button on your post where you gave the link for the users manual.

Reload a method for a change to take effect ?

I've got 1 object which has 1 button and 1 label.
The containt of the label is stored in a text defined in the constructor.
When I press the button I want this text to change.
So I change the containt of the variable text in the action of the button. But it doesn't change anything. The text stay the same.
Is there any way to reload the label for this change to take effect ?
I would appreciate your help,
Olivier.

try the validate() method. It should redo the gui stuff after it has changed. And read the api too.

When does Apple will take unlocking for Mexico (Telcel) iPhones seriously? Because That carrier give thousands of evasive responses to people that ask for an unlocking service after their contracts are done...

When does Apple will take unlocking for Mexico (Telcel) iPhones seriously? Because That carrier give thousands of evasive responses to people that ask for an unlocking service after their contracts are done...

This is the best invention to make people buy new devices. Why am I asking this to Apple???? Maybe I´m wrong and I have to ask to Microsoft or maybe Google? There is a law that obligates all carrier companies to unlock those devices that are off contract. But even with this, this company denies to do it. They suppor their idea in the fact that that law was published on Oct´12, so brilliantly they have solved to unluck only those devices bought after that date..... I have all those evidences but all are in spanish.....

Java.policy - does it need restart of all processes to take effect

I have to change java.policy in WebSphere. Do I have to restart all the servers running on that node (all Java Processes using that JRE) for the policy changes to take effect?
This will force me to restart all the other applications running on different WAS server instances. Is there a way to avoid this?
Thanks
Satish

I am not familiar with WebSphere but there should be a way to refresh the Policy. My Mozilla browser Java console has this option.

Trying to crop a scene. it's against greenscreen. i click the 'done' button but doesn't take effect. what am i doing wrong?

i am trying to crop a scene. it is against greenscreen. does that matter? it won't take effect when i click on the done button.

Hi Mascord,
Both the conditions 'Required' and 'Anyone' or 'Prefill' cannot work simultaneously.
As per your workflow you can assign the role of one of the form fields as 'Prefill' and the others 'Anyone' without making them 'Required'.
Regards,
Rave

Update 4.01 asks to update, I say yes it appears to update then in the last step it goes back up to the update center and cannot connect, the update does not take effect and it keeps asking

I allow update 4.01 to update got thru all the steps and at the last step it goes back out to the update and cannot connect, the update does not take effect.

Sign out of your account on the iPad, restart the iPad and then sign back into your account.
Settinsg>Store>Apple ID - tap the ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
After restarting go to Settings>Store and sign in again.

By adding an external hd to time capsule does it increase the size of available space for time machine back-ups?

By adding an external hd to time capsule does it increase the size of available space for time machine back-ups?

No, each drive is treated separately. Sorry!!

Why does it take ages for my video files to be listed in the menu?

I have my apple tv 2nd generation connected to my airport extreme first generation via ethernet. I have my mac mini connected to the same network (though not connected to the airport extreme) with video files and tv shows in itunes. My itunes media is stored on a hard drive connected to my mac mini and home sharing is on.
It takes ages for my apple tv 2 to list the videos/tv shows in its menu. For example I have my films listed by genre. If I select a genre, it takes sometimes as long as 5+ minutes to list the videos within that genre.
Can anybody help with this frustration?

Welcome to the Apple Community.
You probably have a problem with your LAN. If you are using wifi:
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

Ipad takes photo every time I close the cover of its case. When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding.

When I close the cover - it really does take a picture and saves a photo. Luckly, it make a click, and pictures are seen in the photo album, and it does not appear to be forwarding. It is just gobbling memory and annoying as I can only delete these pictures one at a time.

It seems to take a picture of the counter top = I do not see the keyboard.
I am wondering ....It may be a kids game app that takes pictures of the screen or out the back camera. I am starting to think it may just be a sound effect when placing the iPad on its screen. So many things that may be unrelated but coincedental. It started in May (the sound) and so did the multiple pictures - starting to think they are not related.
Thanks for the quick tip on deleting multiple pictures.

Increasing nsslapd-sizelimit does take effect for iPlanet 5.0SP2

Similar Messages

Maybe you are looking for