Increasing Number of Rings Before Voicemail Pickup

I can't figure out how to let it ring longer before going to voicemail on my 3G iPhone. Any thoughts? Thanks.

You would need to call ATT and request that they adjust the number of rings.

Similar Messages

  • Reduce number of rings before Voicemail

    I would like to reduce the number of rings before my voicemail comes on on my Blackberry Z10. It is forwarded from my desk phone and that means that customers are waiting an excessive amount of time before my voicemail kicks in on my BB. I called my carrier (Rogers) and they said they were unable to do this. I'm not sure if their tech support was correct in this, as I've seen on other forums that this is the process by which you change the length of the ring tones.
    Is there a way to reduce the number of rings before voicemail on my Blackberry Z10 in my settings?
    Thanks

    *61 *NNN NNN NNNN *11 *X#
    Where X is ranges from 5 to 30 seconds before a call get forwarded to the voice mailbox
    And NNN NNN NNNN is the VoiceMail number provided by the Carrier
    You can locate the Carrier Voicemail Number in 
    Phone Settings/Call Forwarding/Forward If Buzy

  • Increase number of rings before pickup

    How do I increase the number of rings before pickup on the iPhone4?

    Apple needs to provide better advice to its iPhone customers on this issue -- there is nothing on this topic in the iPhone manual.
    My iPhone 4S rings for 4 rings (about 10 seconds) before the call transfers to voicemail.  I would like the time to be extended to about 15-20 seconds.
    After spending more time than I would like to determining that the manual does not address this topic, and searching the internet, I called my wireless provider (Verizon), who said they extended the ring time on their switch, but it failed to register on my iPhone.  The Verizon rep conferenced in an Apple rep, who said the iPhone could not be changed in this respect. 
    This is basic stuff -- even if it does involve some interaction between Apple and the wireless service provider.  It is one of the first things I have attempted to modify on my phone (immediately after I programed in my voicemail).  If the phone cannot be modified in this respect, Apple should say so in its manual, and not have everyone be forced to figure out how to try to fix this problem for themselves.

  • Increase number of rings before answer phone

    Hi
    Nokia 6500
    How do you increase the number of rings before the call automatically goes to answerphone? I keep missing my calls.
    It's a REALLY simple question I know, but I have searched the net and read the manual and can't find an answer.
    Does anyone know if it can be done and how?
    Many thanks in advance.
    Lex

    sallyald wrote:
    sallyald wrote:
    This has worked on other makes of phones but how do I get the ** on a nokia asha 210?  Pressing ** does nothing but when a number is pressed the keypad appears.
    doc3748 wrote:
    hi
    i had a real problem and found this answer on av forum which worked.i thought of sharing with you all as i too was being driven crazy by the number of missed calls as it would go on divert after only 5 seconds
    for o2 it is  **61*901*11*20#
    where 901 is the voice mail no  and 20 is the seconds delay you wish before divert kicks in.
    it can be set as 5,10,15,20 or 30 .
    hope this helps.
    Hi,
    Was having difficulty asking the phone function of the phone to type **.  Not quite sure how this happened but I pressed the bottom left hand key with the arrow pointing north east, pressed the **, realeased buttons, pressed ** and the screeen showed **
    Thanks.
    Ooops, posted too soon.  Al this does now is saves the command as a phone number

  • An extra charge for changing the number of rings before voicemail picks up??

    After trying all the tips I could find about changing the number of rings it takes before the voice mail picks up (the 58#, trying access setup on the vm, changing it online, etc…), I finally called the customer support line.  I was put on hold for a few minutes (not a problem) only to have the customer service person return to say that he cannot change it because I would have to pay for the "upgraded" voice mail that is not included in my plan (the plan I just signed up for last month). I find it absolutely absurd that moving the number of rings for vm from 4 to 6 justifies an added cost.   If anyone knows the magic on how to do this for a line that is in the Dallas Ft Worth area, I would be very appreciative.  As for the extra charge to adjust your own voice mail, you can draw your own conclusion on how fair that is...
    And I don't buy that it is not as simple as it appears... if you can program the thing to pickup on three rings then you should be able to adjust the forwarding  and vm to pick up on 6.  i have never had this problem with any other carrier.

    I called tech support, not customer service, and had my rings moved back a few so my answering machine would pick up first.  Voicemail is for back up in case I don't answer call waiting.
    It was free.

  • Chaning number of rings before voicemail kicks in

    I need more time to get to my phone. The number of rings should be user settable.

    It is. You're not actually setting the number of rings, but the length of time before voicemail picks up. You can do this in one of two ways:
    1. Call AT&T and ask them to increase it.
    or
    2. Follow the instructions in the following post:
    http://forums.cingular.com/cng/board/message?board.id=palm&message.id=4087
    (I realize this is from the Cingular Palm support forum, but it doesn't matter. The process is the same for any GSM phone.)

  • Number of rings before voicemail

    My phone only rings four times before voicemail kicks in. How do I change this to give me more te to answer?

    This is a setting on the carrier end, not the phone. The easiest way is to call your carrier and ask them to make the change. There are codes you can dial on your phone to change the setting yourself, but they differ by carrier and with no location in your profile, we don't know which carrier you have. But call them. It's not a number of rings, actually, but a time - the max is usually 30-40 seconds.

  • How do you change the number of rings before voicemail is activated on an iPhone 5?

    Thank You

    I don't believe it is possible to change the time between dialing and when it switches to voicemail.

  • Setting time (number of rings)  before voicemail picks up.

    Voice mail is intercepting calls sometimes after only three rings.  I want to set to 30 seconds.  How do I do that?

    It is already set by the system at 30 seconds and unless something has changed recently, it can't be changed.  Using a different ringtone sometimes helps.

  • Setting Number of Rings before Voicemail

    It seems one cannot.
    James

    Found it.....this is not my great stuff, but from another user. I did try it and it works great!
    You can do 1 of two things..
    1-Call At&t to make your ringer longer
    2-Or you can try it yourself... (Found on another forum)
    The following codes should allow you to control the delay from 5 to 30 seconds on any GSM phone:
    this was not working so I removed it.....let me find a better one that works.
    Message was edited by: tikigiant

  • Changing the number of rings to voicemail?

    Is there any way to change the number of rings before voicemail picks up?  Have looked through everything and can't find anything.  I would like to lengthen the number of rings so I don't miss as many calls.

    The way you change it is specific to your provider. Here are the instructions to change it on AT&T.
    On your phone, dial *#61# and click Send.
    Some information should be displayed: number that the calls are being forwarded to and the delay before the forwarding engages.
    Write down the number (including +1)
    Dial **61*+1xxxyyyzzzz*11*30# and hit Send. +1xxxyyyzzzz is the number you wrote down previously, 30 is the delay in seconds. The delay can be set in 5 second increments, 30 is maximum
    Dial *#61# to verify that the new settings are active.
    Not sure about the other providers. If I find the instructions, I'll post them.
    Message Edited by taftwatson on 11-13-2008 06:45 PM

  • Only 3 rings before voicemail.

    How do I extend the number of rings before voicemail kicks in - my 8520 only rings 3 times - not enough to find it and answer it.  Missing loads of potentially important calls.

    As a norm, most all carriers have a default 15 seconds of ringtime until the voicemail picks up.
    If you do need additional ring time before voicemail: 
    The simplest method is to call your carrier and request a longer ring time, up to 30 seconds.
    If you have a GSM based phone, some have had success by dialing this number from your phone: **61*XXXXXXXXXXX**30#
    Replace XXXXXXXXXXX with the number of your carrier voicemail center (find it by looking at your Phone Dialer > Options > VoiceMail > Access Number. Put your access number in place of the Xs above.
    For example, the T-Mobile voice mail access number is 18056377243, and thus the string to dial would be **61*18056377243**30#
    Replace the 30 at the end of the string with your desired seconds. For most carriers, 30 seconds is the longest allowed
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do you change the number of rings before a call goes to voicemail?

    How do you change the number of rings before a call goes to voicemail.

    You can't; it's set by Verizon at 30 seconds.

  • Number of rings before going to answerphone

    I have a Nokia 6300 and was wondering if there is any way to increase the number of rings before it goes to answerphone.
    Many Thanks
    Dartmoor48

    Answered many times before.
    For example:
    /discussions/board/message?board.id=phones&thread.id=50285
    /discussions/board/message?board.id=swupdate&thread.id=38895
    /discussions/board/message?board.id=phones&thread.id=8734
    These topics were found by running a uick search for voicemail timeout on this forum.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Rings before voicemail

    How can I increase the number of times the iPhone 5 rings before it goes to Voicemail? I can barely get to the phone in time unless it's right in my hand.

    No, you can't increase the number of rings before going to voicemail.

Maybe you are looking for

  • I cannot update or download my creative cloud I am getting an error message

    I am getting an error message on all the products that need installed and /or updated  it is U44MIP7.  Please help as I am neding the creative cloud for school and cannot access the programs.

  • How to download the e-learning video

    Hi all, Does anyone know how to download the e-learning video in SAP Business One ? Because some of the links don't have the link for download and i must click it to watch the video. It will help me to watch it in offline connection. Thanks in advanc

  • China Golden Audit / Frame Reporting

    Hello together, I am working for a German automotive supplier. Currently I'm trying to implement the SAP Frame Reporting. I'm also in a process of coordination to have a conference call with consultants of SAP China, a Chinese coleague and two German

  • In the Structure VBDKR..Document Header View for Billing...

    Dear Friends, In the Structure VBDKR..Document Header View for Billing, there is a component IHREZ which is Customer /Vendor Internal refrence number. Can anyone tell where do I locate this in Billing or anywhere. Kind Regards Ravi.

  • HT204088 WRONG APPLE ID SHOWING IN APP STORE HOW DO I CHANGE?

    Hi My daughter set my iphone 4s up for me - all info shows my apple id except when i go to app store n try to install updates then my daughters apple id automaticaly comes up have let iphone savvy people try no one can change have rebooted re done pa