Increasing number of rows in a section

Hi,
I'm lost on how to increase rows in a dynamic section that has calculations based on each entry. When I add a row under Goals for Current Year, going from 6 to 9 rows (it will be up to 15 eventually) an error message comes up. It was working fine until trying to add the rows. There is a calculation on another page that is based on the number of Goals and Points.

Hi, Please disregard. I think I've been working in a faulty document
to begin with. I'll try again using a different one.

Similar Messages

How to increase number of rows display in ESS

Hi All,
how to increase number of rows display in ESS applications especially in Time approval inbox from standard display of 5 rows to say like 20 rows? is there a quick way to do it?
Thanks all
Murty

Kalpesh,
it is actually in web dynpro view, I have seen this setting and it doesnt give option for increasing default number of rows in web dynpro application. Table is dynamically constructed in web dynpro implementation and I have the hard time finding out., Any help is appreciated in these lines,
Thanks
Murty

How to increase number of rows displayed in Essbase drill-through report?

Hi
By default, the maximum number of rows per Essbase drill-through report (via Integration Services) is set to 1000. Could anyone tell me how to change this limit please?
Regards
Chandra

Is this for an EIS drill through report that drills through to get RDBMS data, using spreadsheet add-in for example? If so check and see if "Maximum rows per query" in EIS is currently set at 1000 and try to increase it. (I don't recall hitting a 1000 limit in the past, perhaps your report is set at that? or if this is through Web Analysis maybe WA is governing it)
To set/change a query governor in EIS:
1     In the Drill-Through Reports dialog box, select a report name.
2     Click Edit to open the Report properties dialog box.
3     In the Report properties dialog box, select the Governors tab.
4     In the Maximum time per query (in seconds) text box, enter the maximum query time.
For example, to stop a query that takes longer than 100 seconds, type 100.
5     In the Maximum rows per query text box, enter the maximum number of rows to retrieve.
For example, to stop a query that retrieves more than 200 rows, type 200.
6     Click OK.

Increase number of rows in table control dynamically

Hi,
How can I increase the number of rows in a table control dynamically.If i have placed a table control in the screen painter with 5 rows, how can I increase the length to 10 dynamically in the coding.Kindly advice..
Best Regards,
Ashwini

Hi aswini,
where did you tell the system to have only 5 rows.
i dont think such an option of specifying the number of rows is possible.
as i reconfirmed the screen painter just now.
please let me know if possible.
try this.
in PBO.
describe table itab lines tc-lines.
if tc-lines is initial.
tc-lines = 5.
else.
tc-lines = 10.
endif.
hope this will serve your purpose.
thanks and regards
Ramchander Rao.Krish
Edited by: ramchander krishnamraju on Nov 19, 2008 11:52 AM

0ANALYZER Web Template - increase number of Rows displayed

Hello All,
Is there a context menu command / popup value that will allow an end-user to increase the *default* number of Rows displayed at a time (25) when we are using the 0ANALYZER Web template?
We have about 100 characteristics anyway, so setting the displayed "chunks" of Rows to say 50 at a time would be quite reasonable.
We do not want to customise 0ANALYZER web template (and therefore any solution to add any extra buttons/JScript won't be acceptable)
Any ideas 0ANALYZER experts?
Thanks
Ian

Hi Ian,
My suggestion is that you make a copy of 0ANALYZER_PATTERN web template say ZANALYZER_PATTERN and make this your default web template. Now in the properties of your analysis grid of ZANALYZER_PATTERN, you can change the number of displayed columns and rows. But again this will be appplied to all web queries using this template.
If you want to change number of rows and columns dynamically, why not ask SAP netweaver team.
Thanks.
Sheo

Increase number of rows in a Conversion File

Hi Experts,
I´m setting up a huge conversion file (around 25000 rows), and when I`m going to validate it, Only the first 3568 rows are safe.
Does anybody know how to modify the conversion file, in order to allow more rows?
Thank`s in advance.

Hi,
Isnt it very tedious to maintain such a huge conversion file? Can you consider to use some java scripts or some wild characters to reduce the number of rows in your file.
Hope this helps.

Increasing number of rows in Pagination Schema

Hi All,
I have one sql report . That reports contains more than 30000 rows .
For that report I am using Row Ranges 1-15 16-30 in select list(with pagination) pagination Schema.
If I am giving Maximum Row Count 15000 its working properly.
If more than 15000 that select list is disabled and It dosent work properly.
And in the report I am able to see only 15000 of records ... the remaining records I cant able to see.
How can see all the records by using same pagination schema
I am using apex 4.1.
Thanks in advance
Thanks
sagar

sag wrote:
I have one sql report . That reports contains more than 30000 rows .
For that report I am using Row Ranges 1-15 16-30 in select list(with pagination) pagination Schema.
If I am giving Maximum Row Count 15000 its working properly.
If more than 15000 that select list is disabled and It dosent work properly.
And in the report I am able to see only 15000 of records ... the remaining records I cant able to see.
How can see all the records by using same pagination schemaYou can't. That pagination scheme (not "schema") is automatically disabled for reports with large row sets for performance reasons.
Either use a different scheme or provide methods for users to filter the data down to a reasonable size. No one wants to page through 30000 rows anyway.

How to increase the number of rows for Entry via Excel in SSM ?

hello
we are facing a scenario where we need to enter the target data for more than 14000 fields.So when we open the excel ad in and trying to upload, it is accepting data for only 500 fields and the rest are not getting displayed.
The condition is that we have to enter data via Entry and Approval and not using a procedure and multiple metric sets is not a feasible option since the number of records is large. How can the number of rows in excel be increased ?
Vijay

Hi Bob
I am facing another problem....
we have designed our model in such a way that we built it using normal procedures but the target values have to be entered using entry and Approval via Excel ad-in..
the problem we are facing is that if we select both the actual and the target measures to load the data via Excel login then the column TARGET is getting greyed out. When we build the same model using cube builder , the column TARGET is not getting greyed out and we are able to enter data there.
Is there any setting changes we need to make inorder to make the Entry and Approval process via Excel behave the same way when the model is built using the Cube builder ? Are there any new notes or a newer version of Excel ad in to resolve this ?
Vijay

How to increase the number of rows in Status Oveview iView in MSS?

Hi
We have implemented MSS and have a question regarding Status overview iview.
The standard status overview iview of the team workset has 5 rows and we have to scroll using the arrow buttons to select/view a request.
Now can anyone explain me how to increase the number of rows in this iview? Is this somthing that has to be accoplished through web dynpro customization?
I checked the options in iView property and do not see any option to increase the number of rows.
please help
Thanks
-Michael

Hi Micheal,
Well, I am not really sure, if you could accomplish this using customizing, but I am sure that you can accomplish this using the JDI. Well, you can extract the application's source code using JDI and then change the required display rows property and republish it.
Am not really sure if this is suggestable method for this requirement,but it can be achieved using this JDI stuff.
Regards
<b>Raja Sekhar</b><i></i>

How to increase the number of rows to be displayed in BEx Web Analyzer

hi,
I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows of data at a time. How to increase the number of rows? do i need to any kind of settings?
pls reply.

Hi,
I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
<bi:BLOCK_COLUMNS_SIZE value="4" />
<bi:BLOCK_ROWS_SIZE value="17" />
Then just save, and ignore the error messages.
Message was edited by:
vind Reinsberg

How to increase the number of rows in a jTable dynamically?

Can anyone help me in increasing the number of rows in a jTable dynamically without using DefaultTableModel?
I don't want to use DefaultTableModel because my program is about to finish except this problem.
Thanks in advance.

Presumably you're using your own custom table model class. Modify that so that it returns the number of rows you want. Though presumably it would do this anyway so I've no idea what the problem is.
Do you mean you've added rows to the table model but they're not being reflected in the table itself? You need to fire events - AbstractTableModel provides simple methods to fire them, but if you're not using that then you'll have to fire them manually.

Increase the number of rows in MDXTEST

Dear colleagues,
I use the SAP transaction MDXTEST to test MDX queries generated by WebI reports. The expected result set is significantly larger then 500 rows which causes the following error in MDXTEST:
"There are more than 500 possible inputs
Message no. DH803"
The help message also says:
"With the function 'Restrict values' you can define selection conditions that reduce the number of valid values.
Use the same function to change the maximum number of rows to be displayed."
Can you explain what that means - how can I increase the number of rows retrieved?
Do I have to modify the MDX statement and if so, how?
Is there a menu option or customizing setting for this purpose?
Any help is appreciated.
Regards
Johannes

Official reply from SAP Support: Please be aware that MDXTEST is only a test transaction. Therefore, the display of data has been restricted and you cannot change this.

Exceeded configured maximum number of allowed output prompts, sections, rows, or columns.

So, I am getting the above error message when trying to access one of the dashboard reports. I know there are some limitations on certain views.
However, my boss is asking if I can find out how many rows I m trying to run before increasing number rows. I don’t know how to find out the number rows the report is trying to run.. Does anyone know how do that? Please please help.
thx

yes the formula should give you same information (no.of rows that report has)
have you tried it ?
Thanks,
Saichand

How do I increase the total number of rows?

This seems like a dumb question, but I can only seem to be able to add one new row at the bottom of my spreadsheet at a time using the '=' in a circle button that appears below the last row of the spreadsheet.
I want to add hundreds of rows, and I can only seem to add one at a time which seems ridiculous and a huge waste of time. There has to be a way to add a huge block of empty rows to the spreadsheet right? Can you really only add one new blank row at a time?

you can select rows, then use the key combination <option> + <down arrow> to add the same number of rows you selected for each key press.
If you select five rows then each time you type the key combination Numbers will add five rows.
If I want to add many rows I select all rows, then type the key combination, then I select all rows, and type the key combination again, repeat as needed

About the number of rows used to map data in Xcelsius

Hi Everyone:
I am using web services to fetch data into Xcelsius. The information I got from web service will increase in time and what I suppose is when I run out of rows to get all data I must open my Xcelsius model and select a greater range of rows on each component to get all the data that the web service is bringing.
Is there an alternative to avoid modifying ranges of data in crontrollers when rows mapped are not enough for the data you are fetching from a web service?
It is a bit confusing, I hope I've been clear enough. I really really will appreciate your opinions. If possible give me technical explanations.
Thank you,
Skull
Edited by: skull_buck on Aug 6, 2009 7:40 PM

Hi Greg
Thanks for your fast reply.
What you suggested is exactly what I am doing now, and also I increased the number of rows allowed to map en Xcelsius which are 512 by default.
I would like to know now, how many rows are advisable to increase? Because I am using some components and you must specify for each one a certain number of rows.
I test mapping 3000 and even 6000 rows but the model is too slow and I was not able to export the swf file in any format.
Thank you again,
Skull

Increasing number of rows in a section

Similar Messages

Maybe you are looking for