Increasing Shared Memory

Hi,
In Oracle Linux 6.3, I have changed my default /dev/shm using
mount -t tmpfs shmfs -o size=3g /dev/shm
And this worked. However I am trying to make the change permanent so I have changed my /etc/fstab entry to be
tmpfs                   /dev/shm                tmpfs   size=3g         0 0
However this has not worked. When I reboot my server /dev/shm returns to its original value
Any ideas of how to make the change persist ?
thanks,
Jim

I cannot say what you are trying to accomplish is reasonable, but to the following may solve your problem with the fixed size of POSIX shared memory.
Re: Size option for /dev/shm in fstab is being ignored in 6.1

Similar Messages

  • 10.10.1  I use sysctl.conf to increased shared memory.  10.10.1 does not read sysctl.conf anymore

    I need to increase shared memory.  In 10.10  is use /etc/sysctl.conf with a line   kern.sysv.shmmax=16777216 and this works.  Also in 10.9.  But in 10.10.1 shared memory can no longer be increased from the default 4194304 by this means.
    The question is simple:   how in 10.10.1 does one increase kern.sysv.shmmax  in a way that survives a re-boot

    I have the same problem on my windows 2003 server but the
    thing is that I have not been able to get the same error on any
    other machine including a windows 2003 I installed on VMWare on the
    same machine. I have narrowed down to where in the encoder this
    happens. The encoder uses page file backed file maps to register
    session information. The call to MapViewOfFileEx method of the
    Win32 API fails with the "access denied" error. Whatever it is,
    it's due to some defect in the Windows installation I have because
    I do not get that message on any other windows installation even
    the ones I do with the same windows CD !
    I am still trying to find out what the defect might be but I
    thought you should know it's got nothing to do with you Windows
    make and model...it happens for me on 2k3 and for you on XP...so
    you should looke elsewhere..

  • I've not found the option to increase shared memory of intel hd graphics card in BIOS

    Hi! I don't find that option. I have the 2.08 version, but the 3.01 is out there. The graphics performance is not very well now. Is there a way to increase this memory to 256 mb or more? Thanks in advance

    hi freinn,
    Welcome to Lenovo Community Forums!
    This is on Auto by default.
        The amount of memory shared to your graphics is dependent on how much RAM you have. Also even if you max out the RAM capacity there will no big jump on the shared memory just few MBs will be added
        The Manual is not available even if there is an updated BIOS.
    Even if a Manual option is available still you can only share the same maximum as the one on Auto. Not a big jump.
    i hate to say it but that's how it will be
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • DB_ACTION_STATNEW - Error - How to increase shared memory in shadow instanc

    Hi all,
    We are facing the below error in the DB_ACTION_STATNEW phase:
    TRACE-INFO: 82:                                                                                13  4.822960
    TRACE-INFO: 83:  [developertra,00000]   WHERE TABNAME = :A0;                                           8  4.822968
    TRACE-INFO: 84:  [dbntab      ,06694]  ***LOG BY4=>sql error 604    performing SEL on table DDNTT
    TRACE-INFO: 85:                                                                                222  4.823190
    TRACE-INFO: 86:  [dbntab      ,06694]  ***LOG BY0=>ORA-00604: error occurred at recursive SQL level 1
    TRACE-INFO: 87:                        ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","select t.ts#,t.file#,t.block...","Typecheck","seg:kggfaAllocSeg")
    TRACE-INFO: 88:                                                                                21  4.823211
    TRACE-INFO: 89:  [dbeh.c      ,00000]  *** ERROR => missing return code handler                       13  4.823224
    TRACE-INFO: 90:                         caller does not handle code 1 from dbntab.c[3718]
    TRACE-INFO: 91:                         ==> calling sap_dext to abort transaction
    HALT 20080410111303
    We have a physical RAM of 64 GB.
    dcecqv1:root > dmesg | more
    Apr 10 11:24
       $Revision: vmunix:    B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
    Memory Information:
        physical page size = 4096 bytes, logical page size = 4096 bytes
        Physical: 66399504 Kbytes, lockable: 51408244 Kbytes, available: 59648572 Kbytes
    From the error message, I feel that I need to increase the shared memory, can you help me how to increase the shared memory now, bcos system is now running in the shadow instance.
    Thanks & Regards
    Senthil

    Thank you for your mail Shaji.
    SQL> show parameter shared_pool_size
    ORA-00604: error occurred at recursive SQL level 2
    ORA-04031: unable to allocate 4120 bytes of shared memory ("shared
    pool","select x.inst_id,x.indx+1,ks...","Typecheck","seg:kggfaAllocSeg")
    When I tried to see the shared_pool_size it gives the above error.
    Regarding the three log files:
    STATNEW.LOG
    LISTNEW.LOG
    DBSTATNEW.LOG
    - I didnot find STATNEW.LOG file in the path /usr/sap/put/log
    - supadm> cat DBSTATNEW.LOG
    1 ETQ201XEntering upgrade-phase "DB_ACTION_STATNEW" ("20080410111258")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '02', GwService = 'sapgw02'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPR3
    4 ETQ399   auth_shadow_upgrade=0
    4 ETQ389 reading file "LISTNEW.LOG" in directory "/usr/sap/put/log".
    4 ETQ275 Created SQL-script "EXSTATE.ORA"
    4 ETQ275 Created SQL-script "EXSTATC.ORA"
    4 ETQ276 Executing SQL-script "EXSTATE.ORA"
    4 ETQ001 START time "2008/04/10 11:12:58"
    4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/SUP/SYS/exe/run
    4 ETQ399 ext. env.: LD_LIBRARY_PATH=/usr/sap/SUP/SYS/exe/run:/opt/java1.5/jre/lib/IA64N:/opt/java1.5/jre/lib/IA64N/server:/opt/java1.5/jre/../lib/IA64N
    4 ETQ399 2008/04/10 11:12:58: put_execute: (tp) forkpid:2537
    4 ETQ002 END   time "2008/04/10 11:13:03"
    4 ETQ278 Errors during execution of SQL-script "EXSTATE.ORA"
    1EETQ203 Upgrade phase "DB_ACTION_STATNEW" aborted with errors ("20080410111303")
    supadm>
    supadm> tail LISTNEW.LOG
    NAME= WTY_OBJNR_INDEX
    NAME= WTY_PARTNER_TAB
    NAME= WTY_RCLHST
    NAME= WTY_RCLOBJ
    NAME= WTY_RELOB_TAB
    NAME= WTY_RELOB_TAB_TX
    NAME= WTY_TABLE_ALV
    NAME= WYT2M
    tp_exec_dbscript: 1 statement(s) successfully processed.
    supadm>
    Can u pl help
    Thanks
    Senthil

  • Increase shared memory by IGD (intel HD)

    when will the shared memory for intel HD graphics processor can be increase more than 256MB? some motherboard with some brand can assign until 1GB of RAM to the integrated graphic. future BIOS development should focus on this matter. 
    thank you
    azuan

    Quote from: azuan on 07-October-13, 10:32:54
    the reason i asked is because the 'manual allocation' in the bios menu only limited to 256MB only.
    The BIOS has no control over the video memory.
    That 64/128/256 MB value is a legacy and it means the reserved system RAM for GPU.
    Most of the GPUs don't need more than 64MB to operate properly.
    But it's better to give them 128 or 256MB.
    Why?
    The "plug & play" (automatic allocation) mechanism was never a perfect one.
    Two devices sharing the same I/O addressing space might lead to conflicts and system crashes.
    You don't want another device to share system RAM with your GPU.
    For this reason it's much better to "lock" that RAM area and to reserve it for the GPU.
    Coming back to video memory, that will be allocated much later (after the OS is loaded) by the GPU.
    Intel Dynamic Video Memory Technology is used for that.
    Depending on the GPU, installed system RAM and application demand, up to 1.7 GB system RAM can be reserved as video memory.
    Edited:
    http://www.intel.com/support/graphics/sb/CS-029090.htm
    Up to 1.7GB usable video memory for HD 2000, 3000, 4000 and 4600 (all the Gen 2/Gen 3/Gen 4 Intel processors).

  • How will i increase the shared memory of the graphic card of macbook pro 13-inch, early 2011 from 4gb memory?

    how will i increase the shared memory of the graphic card of macbook pro 13-inch, early 2011 from 4gb memory?

    The current version of Mavericks is 10.9.4. To update yours download and install OS X Mavericks 10.9.4 Update (Combo).
    You can upgrade RAM to the maximum your model will support. That would be:
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    About OS X Memory Management and Usage
    Using Activity Monitor to read System Memory & determine how much RAM is used
    OS X Mavericks- About Activity Monitor
    Adding RAM only makes it possible to run more programs concurrently.  It doesn't speed up the computer nor make games run faster.  What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent.  It will improve the performance of applications that run mostly in RAM or when loading programs.

  • Disp+work stop because of shared memory?

    Hello Gurus, I have an SAP server that will not start. It was running previously, but after a parameter update and an instance restart, I cannot get the dispatcher running.
    System is Windows 2012 Server, MSSQL 2008 R2, 16 Core 132 GB RAM.
    I believe it is related to shared memory overlapping somehow, but  I am not sure how to resolve or investigate. I have had issues previously with memory overlap halting SAP servers with Diagnostics Agents, but this server is not currently running any DAA. It is running SAPRouter and some SAP Web Dispatcher instances.
    I will include my trace files below:
    Please help!
    DEV_W0:
    trc file: "dev_w0", trc level: 1, release: "721"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      00
    M sid        PRD
    M systemid   562 (PC with Windows NT)
    M relno      7210
    M patchlevel 0
    M patchno    100
    M intno      20020600
    M make       multithreaded, Unicode, 64 bit, optimized
    M profile    \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
    M pid        7668
    M
    M  kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
    M  length of sys_adm_ext is 588 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7668) [dpxxdisp.c   1376]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: sizeof(wp_adm) 42864 (2256)
    M  DpShMCreate: sizeof(tm_adm) 5517056 (27448)
    M  DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
    M  DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
    M  DpShMCreate: sizeof(comm_adm) 1384080 (2744)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm) 0 (296)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm) 0 (80)
    M  DpShMCreate: sizeof(vmc_adm) 0 (2160)
    M  DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
    M  DpShMCreate: sizeof(gw_adm) 48
    M  DpShMCreate: sizeof(j2ee_adm) 3952
    M  DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000000200050, size: 7174832)
    M  DpShMCreate: allocated sys_adm at 0000000000200060
    M  DpShMCreate: allocated wp_adm_list at 00000000002030B0
    M  DpShMCreate: allocated wp_adm at 00000000002032A0
    M  DpShMCreate: allocated tm_adm_list at 000000000020DA20
    M  DpShMCreate: allocated tm_adm at 000000000020DA70
    M  DpShMCreate: allocated wp_ca_adm at 0000000000750980
    M  DpShMCreate: allocated appc_ca_adm at 0000000000760390
    M  DpShMCreate: allocated comm_adm at 000000000076FDA0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 00000000008C1C40
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated gw_adm at 00000000008C1CF0
    M  DpShMCreate: allocated j2ee_adm at 00000000008C1D30
    M  DpShMCreate: allocated ca_info at 00000000008C2CB0
    M  DpShMCreate: allocated wall_adm at 00000000008C2D40
    M  DpCommAttachTable: attached comm table (header=000000000076FDA0/ft=000000000076FDB0)
    M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
    M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  <ES> EsILock: use spinlock for locking
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X  mm.dump: set maximum dump mem to 96 MB
    M  DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
    M
    M Fri May 16 01:23:14 2014
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M
    M Fri May 16 01:23:15 2014
    M  ThInit: running on host SAPERP
    M
    M Fri May 16 01:23:16 2014
    M  calling db_connect ...
    B  Loading DB library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' ...
    B  Library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' loaded
    B  Version of 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' is "721.02", patchlevel (0.44)
    C  Callback functions for dynamic profile parameter registered
    C  Thread ID:4168
    C  Thank You for using the SLODBC-interface
    C  Using dynamic link library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    SAP patchlevel  0
    C    SAP patchno  100
    C    Last MSSQL DBSL patchlevel 0
    C    Last MSSQL DBSL patchno         44
    C    Last MSSQL DBSL patchcomment DBSL support for Microsoft ODBC Driver 11 for SQL Server (1816426)
    C  ODBC Driver chosen: SQL Server Native Client 11.0 native
    C  lpc:(local) connection used on SAPERP
    C  lpc:(local) connection used on SAPERP
    C  Driver: sqlncli11.dll Driver release: 11.00.3000
    C  GetDbRelease: 11.00.3339.00
    C  GetDbRelease: Got DB release numbers (11,0,3339,0)
    B  Connection 0 opened (DBSL handle 0)
    M  ThInit: db_connect o.k.
    M  ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
    I
    I Fri May 16 01:23:17 2014
    I  MtxInit: 0 0 0
    M  SHM_PRES_BUF (addr: 0000000018030050, size: 4400000)
    M  SHM_ROLL_AREA (addr: 000007FFDDAB0050, size: 268435456)
    M  SHM_PAGING_AREA (addr: 0000000018470050, size: 134217728)
    M  SHM_ROLL_ADM (addr: 0000000020480050, size: 2767448)
    M  SHM_PAGING_ADM (addr: 0000000020730050, size: 787488)
    M  ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000020800050
    M  ThCreateNoBuffer index size: 3000 elems
    M  ThCreateVBAdm allocated 31056 bytes (50 server) at 0000000000910050
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  ES initialized.
    X  mm.dump: set maximum dump mem to 96 MB
    B
    B Fri May 16 01:23:18 2014
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 19, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 0000000027280160, size: 90000000, end: 000000002C854BE0)
    B  dbtbxbuf: Buffer TABLP (addr: 000000002C860160, size: 20480000, end: 000000002DBE8160)
    B  dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 0000000011BE0050
    B  dbsync[db_syinit]: Buffer synchronisation started with
    B    sync_concept      = SEQ_NR
    B    sendon            = 1
    B    bufreftime        = 120
    B    max_gap_wait_time = 60
    B    ddlog_del_time    = 60
    B    last_counter      = 702514
    B    oldest_gap        = (2147483647,00000000000000)
    B    time_of_last_sync = 20140516012317
    B    MySysId           = 'SAPERP              00'
    B  dbexpbuf[EXP_SHB]: buffer EIBUF installed with
    B    semkey             = 35
    B    shmkey             = 54
    B    wp_n               = 19
    B    sclass             = 0
    B    block_length       = 256
    B    max_objects        = 2000
    B    max_obj_size       = 859872
    B    pref_obj_size      = 0
    B    est_large_obj_size = 16384
    B    free_vec_lg        = 65
    B    hash_vec_size      = 4001
    B    buffer_l           = 4194304
    B    max_blocks         = 13438
    B    free_blocks        = 13438
    B    mutex_n            = 4001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    B  dbexpbuf[EXP_SHM]: buffer ESM   installed with
    B    semkey             = 56
    B    shmkey             = 65
    B    wp_n               = 19
    B    sclass             = 0
    B    block_length       = 256
    B    max_objects        = 2000
    B    max_obj_size       = 859872
    B    pref_obj_size      = 0
    B    est_large_obj_size = 16384
    B    free_vec_lg        = 65
    B    hash_vec_size      = 4001
    B    buffer_l           = 4194304
    B    max_blocks         = 13438
    B    free_blocks        = 13438
    B    mutex_n            = 4001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    B  dbexpbuf[EXP_CUA]: buffer CUA   installed with
    B    semkey             = 30
    B    shmkey             = 47
    B    wp_n               = 19
    B    sclass             = 10
    B    block_length       = 512
    B    max_objects        = 1500
    B    max_obj_size       = 626016
    B    pref_obj_size      = 0
    B    est_large_obj_size = 98304
    B    free_vec_lg        = 193
    B    hash_vec_size      = 3001
    B    buffer_l           = 3072000
    B    max_blocks         = 4892
    B    free_blocks        = 4892
    B    mutex_n            = 3001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    B  dbexpbuf[EXP_OTR]: buffer OTR   installed with
    B    semkey             = 55
    B    shmkey             = 64
    B    wp_n               = 19
    B    sclass             = 13
    B    block_length       = 256
    B    max_objects        = 2000
    B    max_obj_size       = 859872
    B    pref_obj_size      = 0
    B    est_large_obj_size = 20480
    B    free_vec_lg        = 81
    B    hash_vec_size      = 4001
    B    buffer_l           = 4194304
    B    max_blocks         = 13438
    B    free_blocks        = 13438
    B    mutex_n            = 4001
    B    max_mtx_wait_time  = 17000
    B    recovery_delay     = 500000
    B    tracing            = 0
    B    force_checks       = 0
    B    protect_shm        = 0
    I  MPI: dynamic quotas disabled.
    I  MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    M  rdisp/thwpsf_critical_path : -1 -> 0
    M  CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    M  CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    G  RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
    G  GetWritePermissionForShm( pLocation =  99, pEnforce = 1 )
    G  RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
    S  *** init spool environment
    S  TSPEVJOB updates outside critical section: event_update_nocsec = 1
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 0000000034052380
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 00000000382B00D0
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 00000000382B06A0
    S    using messages for server info
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2512 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A  ***GENER* Trace switched on ***
    A
    A  ---PXA-------------------------------------------
    A  PXA INITIALIZATION
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 23104kb, dir_size: 22312kb.
    A  Attached to PXA (address 000007FFEDAE0050, size 300000K, 1 fragments of 276896K )
    A  PXA allocated (address 000007FFEDAE0050, size 300000K)
    A  abap/pxa = shared protect gen_remote
    A  PXA: checking structure sizes: 752|272|16
    A  PXA INITIALIZATION FINISHED
    A  ---PXA-------------------------------------------
    A
    A  ATRA: pfclock execution time = 0
    A  abap/force_local_update_task=0
    A  ABAP ShmAdm attached (addr=000007DFDF142000 leng=20955136 end=000007DFE053E000)
    A  >> Shm MMADM area (addr=000007DFDF639B80 leng=242240 end=000007DFDF674DC0)
    A  >> Shm MMDAT area (addr=000007DFDF675000 leng=15503360 end=000007DFE053E000)
    A  RFC Destination> destination SAPERP_PRD_00 host SAPERP system PRD systnr 0 (SAPERP_PRD_00)
    A  RFC Options> H=SAPERP,S=00,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A  
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    H  HTTP> Parameter icf/ssocookie_mandatory set to 0
    B  dbtran INFO (init_connection '<DEFAULT>' [MSSQL:721.02]):
    B   max_blocking_factor       =  50,  min_blocking_factor         =   5,
    B   max_in_blocking_factor    = 255,  min_in_blocking_factor      =  10,
    B   max_union_blocking_factor =  50,  min_union_blocking_factor   =   5,
    B   prefer_union_all          =   1,  prefer_join                 =   1,
    B   prefer_fix_blocking       =   0,  prefer_in_itab_opt          =   0,
    B   convert AVG               =   1,  alias table FUPD            =   0,
    B   escape_as_literal         =   0,                                 
    B   select *                  =0x00,  character encoding          = STD / []:X,
    B   use_hints                 = abap->1, dbif->0x1, upto->0
    M  ThrCreateShObjects allocated 39514 bytes at 0000000011C00050
    Y  dyWpInit
    Y    ztta/dynpro_ara 800000
    Y    ztta/cua_ara    500000
    Y    ztta/diag_ara   250000
    N  SsfSapSecin: getenv(SECUDIR)=="E:\usr\sap\PRD\DVEBMGS00/sec"
    N
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF library is E:\usr\sap\PRD\DVEBMGS00\exe\sapcrypto.dll .
    N  ===...SSF default hash algorithm is SHA1 .
    N  ===...SSF default symmetric encryption algorithm is DES-CBC .
    N  ===...SECUDIR="E:\usr\sap\PRD\DVEBMGS00/sec"
    N  ===...loading of Security Toolkit successfully completed.
    N  ===   SAPCRYPTOLIB  5.5.5C pl32  (Apr  2 2011) MT-safe
    N  =================================================
    N
    N Fri May 16 01:23:20 2014
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 721, [7210.0.100.20020600]
    W    ITS Plugin: Int.version, [34]
    W    ITS Plugin: Feature set: [31]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    N  SignInit: successfully obtained handle for Security Context cache
    N  SPNegoInit: SPNego disabled ("spnego/enable" not set to 1)
    N  VSI: WP init in ABAP VM completed with rc=0
    E  EnqLockTableSizeCalculate: session quota = 100%
    E  EnqLockTableAttach2: attach to lock table (size = 33554432)
    E  EnqLockTableMapToLocalContext: enque/use_pfclock2 = FALSE
    E  EnqId_Initialize: local EnqId initialization o.k.
    M
    M Fri May 16 01:23:40 2014
    M  *** ERROR => ThPlgConnectToIcm: IcmReadAck failed (-8, ni_rc=-6) [thxxplg.c    5172]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11348]
    M
    M  Info for wp 0
    M
    M    pid = 7668
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    req.req_info =
    M    req.tid = -1
    M    req.uid = 4294967295
    M    req.mode = 255
    M    req.len = 0
    M    req.rq_id = 65535
    M    req.rq_source =
    M    last_tid = 0
    M    last_uid = 0
    M    last_mode = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M
    M  ThIErrHandle: current request:
    M
    M  -IN-- sender_id ?                 tid  -1    wp_ca_blk   -1      wp_id -1
    M  -IN-- action    -                 uid  -1    appc_ca_blk -1      type  -  
    M  -IN-- new_stat  NO_CHANGE         mode 255   len         0       rq_id -1
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: hook >TrThHookFunc< o.k.
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  ThrSaveSPAFields: save spa fields
    M  ThrSaveSPAFields: not an update task, no update info saved
    M  ThrSaveSPAFields: not a batch task, field zttabtckey not saved
    M  ThCallHooks: hook >ThrSaveSPAFields< o.k.
    M  ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
    M  ThCallHooks: hook >ThrBtcCallLgCl< o.k.
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 7668) [dpnttool.c   339]
    DEV_DISP:
    trc file: "dev_disp", trc level: 1, release: "721"
    sysno      00
    sid        PRD
    systemid   562 (PC with Windows NT)
    relno      7210
    patchlevel 0
    patchno    100
    intno      20020600
    make       multithreaded, Unicode, 64 bit, optimized
    profile    \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
    pid        4924
    kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
    length of sys_adm_ext is 588 bytes
    *** SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 4924) [dpxxdisp.c   1314]
      shared lib "dw_xml.dll" version 100 successfully loaded
      shared lib "dw_xtc.dll" version 100 successfully loaded
      shared lib "dw_stl.dll" version 100 successfully loaded
      shared lib "dw_gui.dll" version 100 successfully loaded
      shared lib "dw_mdm.dll" version 100 successfully loaded
      shared lib "dw_rndrt.dll" version 100 successfully loaded
      shared lib "dw_abp.dll" version 100 successfully loaded
      shared lib "dw_sym.dll" version 100 successfully loaded
      shared lib "dw_aci.dll" version 100 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    rdisp/dynamic_wp_check : 1
    rdisp/calculateLoadAverage : 1
    Fri May 16 01:23:12 2014
    *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6438]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: write dp-profile-values into sys_adm_ext
    DpIPCInit2: start server >SAPERP_PRD_00                           <
    DpShMCreate: sizeof(wp_adm) 42864 (2256)
    DpShMCreate: sizeof(tm_adm) 5517056 (27448)
    DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
    DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
    DpShMCreate: sizeof(comm_adm) 1384080 (2744)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm) 0 (296)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm) 0 (80)
    DpShMCreate: sizeof(vmc_adm) 0 (2160)
    DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
    DpShMCreate: sizeof(gw_adm) 48
    DpShMCreate: sizeof(j2ee_adm) 3952
    DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000005460050, size: 7174832)
    DpShMCreate: allocated sys_adm at 0000000005460060
    DpShMCreate: allocated wp_adm_list at 00000000054630B0
    DpShMCreate: allocated wp_adm at 00000000054632A0
    DpShMCreate: allocated tm_adm_list at 000000000546DA20
    DpShMCreate: allocated tm_adm at 000000000546DA70
    DpShMCreate: allocated wp_ca_adm at 00000000059B0980
    DpShMCreate: allocated appc_ca_adm at 00000000059C0390
    DpShMCreate: allocated comm_adm at 00000000059CFDA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0000000005B21C40
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated gw_adm at 0000000005B21CF0
    DpShMCreate: allocated j2ee_adm at 0000000005B21D30
    DpShMCreate: allocated ca_info at 0000000005B22CB0
    DpShMCreate: allocated wall_adm at 0000000005B22D40
    DpCommAttachTable: attached comm table (header=00000000059CFDA0/ft=00000000059CFDB0)
    DpSysAdmIntInit: initialize sys_adm
    rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
    dia token check not active (10 token)
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
    Fri May 16 01:23:13 2014
    rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> EsILock: use spinlock for locking
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    <ES> Info: em/initial_size_MB( 134981MB) not multiple of em/blocksize_KB( 4096KB)
    <ES> Info: em/initial_size_MB rounded up to 134984MB
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 33745 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 96 MB
    DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
    MPI: dynamic quotas disabled.
    MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c   1700]
    Fri May 16 01:23:40 2014
    ***LOG Q0K=> DpMsAttach, mscon ( SAPERP) [dpxxdisp.c   12667]
    MBUF state LOADING
    DpStartStopMsg: send start message (myname is >SAPERP_PRD_00                           <)
    DpStartStopMsg: start msg sent
    CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]
    MBUF state ACTIVE
    DpWpBlksLow: max wp blocks in queue is 800 (80 %)
    MBUF component UP
    DpMsgProcess: 1 server in MBUF
    DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
    *** ERROR => DpIcmMsgProcess: IcmRecMsg (rc=-8,-6) [dpxxdisp.c   19121]
    Fri May 16 01:24:20 2014
    *** ERROR => DpHdlDeadWp: W0 (pid 7668) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W1 (pid 7456) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W2 (pid 8096) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W3 (pid 4376) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W4 (pid 3000) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W5 (pid 3520) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W6 (pid 7024) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W7 (pid 6172) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W8 (pid 6576) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W9 (pid 7756) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W10 (pid 624) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W11 (pid 7468) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W12 (pid 1176) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W13 (pid 6812) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W14 (pid 6968) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W15 (pid 5036) died (severity=0, status=0) [dpxxwp.c     1729]
    *** ERROR => DpHdlDeadWp: W16 (pid 5576) died (severity=0, status=0) [dpxxwp.c     1729]
    *** DP_FATAL_ERROR => DpWPCheck: no more work processes
    *** DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:30 2014
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long) Fri May 16 07:24:30 2014
    ========================
    No Type  Pid    Status  Cause Start Rstr  Err Sem Time Program          Cl  User         Action                    Table
    0 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    1 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    2 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    3 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    4 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    5 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    6 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    7 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    8 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    9 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    10 UPD       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    11 ENQ       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    12 BTC       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    13 BTC       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    14 BTC       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    15 SPO       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    16 UP2       -1 Ended         no    no     1   0    0                                    NO_ACTION                         
    Dispatcher Queue Statistics Fri May 16 07:24:30 2014
    ===========================
    +------+--------+--------+--------+------------+------------+
    |  Typ |    now |   high |    max | writes     |  reads     |
    +------+--------+--------+--------+------------+------------+
    | NOWP |      1 |     33 |   2000 |         43 |         42 |
    +------+--------+--------+--------+------------+------------+
    |  DIA |      5 |      5 |   2000 |          5 |          0 |
    +------+--------+--------+--------+------------+------------+
    |  UPD |      1 |      1 |   2000 |          1 |          0 |
    +------+--------+--------+--------+------------+------------+
    |  ENQ |      0 |      0 |   2000 |          0 |          0 |
    +------+--------+--------+--------+------------+------------+
    |  BTC |      0 |      0 |   2000 |          0 |          0 |
    +------+--------+--------+--------+------------+------------+
    |  SPO |      0 |      0 |   2000 |          0 |          0 |
    +------+--------+--------+--------+------------+------------+
    |  UP2 |      0 |      0 |   2000 |          0 |          0 |
    +------+--------+--------+--------+------------+------------+
    max_rq_id 40
    wake_evt_udp_now 0
    wake events       total    40,  udp     5 ( 12%),  shm    35 ( 87%)
    since last update total    40,  udp     5 ( 12%),  shm    35 ( 87%)
    DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la15[1] = 0.055556 / -1.000000 %
    Dispatcher Load Statistics
    +------+---------+---------+---------+
    |  Typ |     LA1 |     LA5 |    LA15 |
    +------+---------+---------+---------+
    |  DIA |   0.000 |   0.000 |   0.056 |
    +------+---------+---------+---------+
    DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la15[2] = 0.011111 / -1.000000 %
    |  UPD |   0.000 |   0.000 |   0.011 |
    +------+---------+---------+---------+
    DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
    |  ENQ |   0.000 |   0.000 |   0.000 |
    +------+---------+---------+---------+
    DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
    |  BTC |   0.000 |   0.000 |   0.000 |
    +------+---------+---------+---------+
    DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
    |  SPO |   0.000 |   0.000 |   0.000 |
    +------+---------+---------+---------+
    DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
    DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
    |  UP2 |   0.000 |   0.000 |   0.000 |
    +------+---------+---------+---------+
    Dump of tm_adm structure: Fri May 16 07:24:30 2014
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    RM-T19, U20,                 , , 01:23:40, M0, W-1,     , 1/0
    Workprocess Comm. Area Blocks Fri May 16 07:24:30 2014
    =============================
    Slots: 1000, Used: 2, Max: 46
    +------+--------------+----------+-------------+
    |   id | owner        |   pid    | eyecatcher  |
    +------+--------------+----------+-------------+
    |    0 | DISPATCHER   |       -1 | 0xdeadbeef |
    |  546 | DISPATCHER   |       -1 | 0xdeadbeef |
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:35 2014
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >SAPERP_PRD_00                           < (normal)
    DpJ2eeDisableRestart
    DpMBufRead: read server list from MBUF (1 entries)
    DpMBufMod: name [SAPERP_PRD_00                           ], types 191 state 3 (0x0 0x0 0x0 0x0)
    DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 60
    AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
    AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
    DpLockWpBlkEx: lock wp ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqIPutIntoQ: put elem in queue DIA, elems=6
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 41)
    MBUF server state SHUTDOWN
    DpModState: change state STARTING -> SHUTDOWN
    NiBufSend starting
    NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    DpHalt: switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    DpHalt: stop work processes
    DpHalt: stop gateway
    killing process (7752) (SOFT_KILL)
    DpHalt: stop icman
    killing process (5940) (SOFT_KILL)
    DpHalt: terminate gui connections
    send SHUTDOWN to REM TM 19
    DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
    DpLockWpBlkEx: lock wp ca_blk 2
    return errno (-17) to T19
    DpTmSend: errormsg without overhead: use mode 0
    NiBufIAlloc: malloc NiBufadm, to 0 bytes
    DpTmSend: try to send 14 bytes to T19/M0
    NiBufSend starting
    NiIWrite: hdl 25 sent data (wrt=14,pac=1,MESG_IO)
    REL WP ca_blk 2
    set status of T19 to TM_DISCONNECTED
    NiBufISelUpdate: new MODE -- (r-) for hdl 25 in set0
    SiSelNSet: set events of sock 1440 to: ---
    NiBufISelRemove: remove hdl 25 from set0
    SiSelNRemove: removed sock 1440 (pos=3)
    SiSelNRemove: removed sock 1440
    NiSelIRemove: removed hdl 25
    DpDelSocketInfo: del info for nihdl 25 (pos/type=3/3)
    NiICloseHandle: shutdown and close hdl 25/sock 1440
    NiBufIClose: clear extension for hdl 25
    dp_tm_adm[19].stat = DP_SLOT_FREE
    DpGetSchedule: next schedule 1400225080/234000
    DpGetSchedule: no schedule found
    DpITmSlotRelease: release slot 19
    DpListRemove: remove elem 19 from tmadm_inuse_list
    DpListRemove: 19 elems in tmadm_inuse_list
    DpListInsert: insert elem 19 into tmadm_free_list (at begin)
    DpListInsert: 182 elems in tmadm_free_list
    DpHalt: wait for end of work processes
    DpHalt: wait for end of gateway
    [DpProcDied] Process lives  (PID:7752  HANDLE:1300)
    DpHalt: waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:36 2014
    NiISelect: TIMEOUT occured (1000ms)
    *** ERROR => [DpProcDied] Process died  (PID:7752  HANDLE:1300  rc:0x0) [dpnttool2.c  147]
    DpHalt: wait for end of icman
    [DpProcDied] Process lives  (PID:5940  HANDLE:1296)
    DpHalt: waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:37 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5940  HANDLE:1296)
    DpHalt: waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:38 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5940  HANDLE:1296)
    DpHalt: waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:39 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5940  HANDLE:1296)
    DpHalt: waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:40 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5940  HANDLE:1296)
    DpHalt: waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:41 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5940  HANDLE:1296)
    DpHalt: waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:42 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5940  HANDLE:1296)
    DpHalt: waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:43 2014
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:5940  HANDLE:1296)
    DpHalt: waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1445
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Fri May 16 01:24:44 2014
    NiISelect: TIMEOUT occured (1000ms)
    *** ERROR => [DpProcDied] Process died  (PID:5940  HANDLE:1296  rc:0x0) [dpnttool2.c  147]
    DpStartStopMsg: send stop message (myname is >SAPERP_PRD_00                           <)
    DpStartStopMsg: Write AD_STARTSTOP message with type=  0, name=SAPERP_PRD_00       , sapsysnr= 0, hostname=SAPERP                                                        
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 60
    AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
    AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 4
    AdCallRegisteredCvtToExt: opcode 4 call 000007F7B2BB1470
    AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
    DpConvertRequest: net size = 189 bytes
    NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
    NiBufSend starting
    NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
    NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
    NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 17
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 17 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 17 timed out (0ms)
    DpHalt: more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
    NiIRead: hdl 17 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 17 (r)
    NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
    NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 17
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                            
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsISendKeepalive : keepalive sent to message server
    NiIRead: hdl 17 recv would block (errno=EAGAIN)
    Fri May 16 01:24:45 2014
    NiIPeek: peek for hdl 17 timed out (r; 1000ms)
    NiIRead: read for hdl 17 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    DpHalt: detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   13064]
    NiBufSend starting
    NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server (SAPERP / 3900)
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0
    SiSelNSet: set events of sock 1400 to: ---
    NiBufISelRemove: remove hdl 17 from set0
    SiSelNRemove: removed sock 1400 (pos=2)
    SiSelNRemove: removed sock 1400
    NiSelIRemove: removed hdl 17
    DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4)
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 60
    AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
    AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCallRegisteredCvtToExt: opcode 40
    AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
    AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
    DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
    DpLockWpBlkEx: lock wp ca_blk 2
    make DISP owner of wp_ca_blk 2
    DpRqIPutIntoQ: put elem in queue DIA, elems=7
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 44)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 17/sock 1400
    NiBufIClose: clear extension for hdl 17
    MsIDetach: detach MS-system (SAPERP / 3900)
    DpHalt: cleanup EM
    EsCleanup( )
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 4924) [dpxxdisp.c   11574]
    DpHalt: Good Bye .....
    SAPSTARTSRV
    trc file: "sapstartsrv.log", trc level: 0, release: "721"
    pid        6196
    [Thr 6528] Fri May 16 00:38:09 2014
    SAP HA Trace: SAP Microsoft Cluster library '721, patch 100, changelist 1397439' initialized
    CCMS agent initialization for instance type ABAP: return code 0.
    CCMS agent start: return code 0.
    Initializing SAPControl Webservice
    Starting AutoRestart thread
    AutoRestart thread started, version check is enabled
    SapSSLInit failed => https support disabled
    Starting WebService Named Pipe thread
    Starting WebService thread
    Webservice named pipe thread started, listening on port \\.\pipe\sapcontrol_00
    Webservice thread started, listening on port 50013
    \sapadmin is starting SAP System at 2014/05/16  0:38:18
    SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
    SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
    \sapadmin is stopping SAP System at 2014/05/16  0:49:10
    SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
    SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
    \sapadmin is starting SAP System at 2014/05/16  0:50:47
    SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
    SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
    \sapadmin is stopping SAP System at 2014/05/16  1:21:22
    SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
    SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
    \prdadm is starting SAP System at 2014/05/16  1:23:04
    SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
    SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]

    Hi Alwina, here is the DEV_ICM trace:
    From this trace, it appears that it is listening to 65000?
    Netstat shows that the system is listening to 127.0.0.1:65000 .
    Other SAP ports show listening on 0:0:0:0:xxxx , is ICM listening on 127 a problem?
    trc file: "dev_icm", trc level: 1, release: "721"
    sysno      00
    sid        PRD
    systemid   562 (PC with Windows NT)
    relno      7210
    patchlevel 0
    patchno    43
    intno      20020600
    make       multithreaded, Unicode, 64 bit, optimized
    profile    \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
    pid        5940
    [Thr 1812] Fri May 16 01:23:13 2014
    [Thr 1812] Parameter system/type has value: "ABAP"
    [Thr 1812] started security log to file ./dev_icm_sec
    [Thr 1812] ICM running on:
    [Thr 1812] MtxInit: 30001 0 2
    [Thr 1812] ***LOG IM1=> IcmInit, Startup (ICM&SAPERP.CORP.CANSEL.CA&5940&) [icxxman.c    1934]
    [Thr 1812] IcmInit: listening to admin port: 65000
    [Thr 1812] DpSysAdmExtCreate: ABAP is active
    [Thr 1812] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    [Thr 1812] DpIPCInit2: read dp-profile-values from sys_adm_ext
    [Thr 1812] DpShMCreate: sizeof(wp_adm) 42864 (2256)
    [Thr 1812] DpShMCreate: sizeof(tm_adm) 5517056 (27448)
    [Thr 1812] DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
    [Thr 1812] DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
    [Thr 1812] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
    [Thr 1812] DpShMCreate: sizeof(comm_adm) 1384080 (2744)
    [Thr 1812] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    [Thr 1812] DpShMCreate: sizeof(slock_adm) 0 (296)
    [Thr 1812] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    [Thr 1812] DpShMCreate: sizeof(file_adm) 0 (80)
    [Thr 1812] DpShMCreate: sizeof(vmc_adm) 0 (2160)
    [Thr 1812] DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
    [Thr 1812] DpShMCreate: sizeof(gw_adm) 48
    [Thr 1812] DpShMCreate: sizeof(j2ee_adm) 3952
    [Thr 1812] DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000022F0050, size: 7174832)
    [Thr 1812] DpShMCreate: allocated sys_adm at 00000000022F0060
    [Thr 1812] DpShMCreate: allocated wp_adm_list at 00000000022F30B0
    [Thr 1812] DpShMCreate: allocated wp_adm at 00000000022F32A0
    [Thr 1812] DpShMCreate: allocated tm_adm_list at 00000000022FDA20
    [Thr 1812] DpShMCreate: allocated tm_adm at 00000000022FDA70
    [Thr 1812] DpShMCreate: allocated wp_ca_adm at 0000000002840980
    [Thr 1812] DpShMCreate: allocated appc_ca_adm at 0000000002850390
    [Thr 1812] DpShMCreate: allocated comm_adm at 000000000285FDA0
    [Thr 1812] DpShMCreate: system runs without slock table
    [Thr 1812] DpShMCreate: system runs without file table
    [Thr 1812] DpShMCreate: allocated vmc_adm_list at 00000000029B1C40
    [Thr 1812] DpShMCreate: system runs without vmc_adm
    [Thr 1812] DpShMCreate: allocated gw_adm at 00000000029B1CF0
    [Thr 1812] DpShMCreate: allocated j2ee_adm at 00000000029B1D30
    [Thr 1812] DpShMCreate: allocated ca_info at 00000000029B2CB0
    [Thr 1812] DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
    [Thr 1812] MPI: dynamic quotas disabled.
    [Thr 1812] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    [Thr 1812] CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
    [Thr 1812] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    [Thr 1812] Fri May 16 01:23:14 2014
    [Thr 1812] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 0
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 1
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 2
    [Thr 6912] IcmProxyWatchDog: proxy watchdog started
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 3
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 4
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 5
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 6
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 7
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 8
    [Thr 1812] IcmCreateWorkerThreads: created worker thread 9
    [Thr 4024] IcmMpiWatchDogThread: MPI watchdog started
    [Thr 4400] IcmWatchDogThread: watchdog started
    [Thr 6524] HttpISubHandlerAdd: Added handler HttpFileAccessHandler(000000000C2E2750), slot=0, flags=4098) for /sap/public/icmandir/, active: 1, table 000000000C2E24C0
    [Thr 6524] ISC: created 400 MB disk cache.
    [Thr 6524] ISC: created 50 MB memory cache.
    [Thr 6524] HttpISubHandlerAdd: Added handler HttpCacheHandler(000000000C3EB4B0), slot=1, flags=12293) for /, active: 1, table 000000000C2E24C0
    [Thr 6524] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/icmadmin.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
    [Thr 6524] HttpISubHandlerAdd: Added handler HttpAdminHandler(000000000C461480), slot=2, flags=36869) for /sap/admin, active: 1, table 000000000C2E24C0
    [Thr 6524] HttpISubHandlerAdd: Added handler HttpModHandler(000000000C461570), slot=3, flags=12293) for /, active: 1, table 000000000C2E24C0
    [Thr 6524] CsiInit(): Initializing the Content Scan Interface
    [Thr 6524]            PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
    [Thr 6524] CsiInit(): CSA_LIB = "E:\usr\sap\PRD\DVEBMGS00\exe\sapcsa.dll"
    [Thr 6524] HttpISubHandlerAdd: Added handler HttpAuthHandler(000000000C4615F0), slot=4, flags=12293) for /, active: 1, table 000000000C2E24C0
    [Thr 6524] HttpISubHandlerAdd: Added handler HttpSAPR3Handler(000000000C4AFAE0), slot=5, flags=1052677) for /, active: 1, table 000000000C2E24C0
    [Thr 6524] Started service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
    [Thr 6524] Started service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
    [Thr 6524] Fri May 16 01:23:18 2014
    [Thr 6524] IcmNetCheck: network check passed without detecting problems
    [Thr 4268] Fri May 16 01:23:24 2014
    [Thr 4268] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/ITS.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
    [Thr 8156] Fri May 16 01:24:14 2014
    [Thr 8156] *** WARNING => IcmCallAllSchedules: Schedule func 1 already running - avoid recursion [icxxsched.c  481]
    [Thr 5948] Fri May 16 01:24:24 2014
    [Thr 5948] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (rc=500)- please check node in TA sicf [icxxman.c    2598]
    [Thr 6912] Fri May 16 01:24:44 2014
    [Thr 6912] IcmProxyWatchDog: Shutdown request received
    [Thr 4400] IcmWatchDogThread: Shutdown request received
    [Thr 6912] *** IcmProxyWatchDog: exit thread ***
    [Thr 4024] *** IcmMpiWatchDogThread: exit thread ***
    [Thr 4400] *** IcmWatchDogThread: exit thread ***
    [Thr 1812] IcmLoop: Shutdown request received
    [Thr 1812] Deactivated service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
    [Thr 1812] Deactivated service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
    [Thr 1812] Removed service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
    [Thr 1812] Removed service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
    [Thr 1812] *** ICM shutdown completed (pid: 5940) ***

  • ORA-27101: shared memory realm does not exist urgent cannot connect

    Hi i can't succeed connectivity test with netmgr
    Initializing first test to use userid: scott, password: tiger
    Attempting to connect using userid: scott
    The test did not succeed.
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    There may be an error in the fields entered,
    or the server may not be ready for a connection.
    Here is what i get from tcpdump:
    0x00a0: 5241 2d30 3130 3334 3a20 4f52 4143 4c45 RA-01034:.ORACLE
    0x00b0: 206e 6f74 2061 7661 696c 6162 6c65 0a4f .not.available.O
    0x00c0: 5241 2d32 3731 3031 3a20 7368 6172 6564 RA-27101:.shared
    0x00d0: 206d 656d 6f72 7920 7265 616c 6d20 646f .memory.realm.do
    0x00e0: 6573 206e 6f74 2065 7869 7374 0a4c 696e es.not.exist.Lin
    0x00f0: 7578 2045 7272 6f72 3a20 323a 204e 6f20 ux.Error:.2:.No.
    0x0100: 7375 6368 2066 696c 6520 6f72 2064 6972 such.file.or.dir
    0x0110: 6563 746f 7279 0a ectory.
    Here an attempt with sqlplus that didn't work
    sqlplus scott/tiger@CHUCKY
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 17:05:03 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    Another attempt with sqlplus that succeed i dunno why
    oracle@debian:~$ sqlplus scott/tiger
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 17:06:02 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL>
    Can someone help me to understand what is wrong please?

    user499283 wrote:
    Well I don't understand exactly what you mean
    here is the listener status
    SNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-MAR-2006 18:24:33
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=debian)(PORT=1521)))
    Services Summary...
    Service "CHUCKY" has 1 instance(s).
    Instance "CHUCKYSON", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:3 refused:0
    LOCAL SERVER
    Service "chucky.rss-global.com" has 1 instance(s).
    Instance "CHUCKY", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    Service "chuckyXDB.rss-global.com" has 1 instance(s).
    Instance "CHUCKY", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1022 state:ready
    DISPATCHER <machine: debian, pid: 11725>
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=49930))
    Service "chucky_XPT.rss-global.com" has 1 instance(s).
    Instance "CHUCKY", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    The command completed successfully
    I dont know if it is a good thing i copy an init.ora file to initCHUCKY.ora and now database is using it I have just changed some values in it like control files dbname ... that were pointing to another database maybe this is why i dont manage to get this database runing.
    Now i am stucked I dunno what to do
    racle@debian:~$ tnsping chucky
    TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 29-MAR-2006 18:27:45
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    /home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = debian)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = CHUCKY)) (HS = OK))
    OK (0 msec)
    I am so new to it as i understand the listener is working if i beliave what reports tnsping
    As I understand the database is started
    SQL> startup
    ORACLE instance started.
    Total System Global Area 167772160 bytes
    Fixed Size 1218316 bytes
    Variable Size 62916852 bytes
    Database Buffers 100663296 bytes
    Redo Buffers 2973696 bytes
    Database mounted.
    Database opened.
    As Inunderstand it is listeneing on 1521
    netstat -anp | grep 1521
    tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 11762/tnslsnr
    tcp 0 0 127.0.0.1:46370 127.0.0.1:1521 ESTABLISHED11703/ora_pmon_CHUC
    tcp 0 0 127.0.0.1:1521 127.0.0.1:46370 ESTABLISHED11762/tnslsnr
    unix 2 [ ] DGRAM 43990 11521/su
    I made a tcpdump i saw the data is comong on localhost port 1521
    Synthese I think the listener is runing, the database too, it is making a listen on 1521 port , when I try to connect data arrives on the right interface.
    But I can't login by
    sqlplus scott/tiger@CHUCKY
    qlplus SCOTT/tiger@CHUCKY
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 18:32:49 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux Error: 2: No such file or directory
    I dunno what is this fuckin shared memoryThis fuckin shared memory is how oracle does interprocess communication. When you connect to Oracle, you have to connect to this area. If you tell it the wrong area, it won't find it. You can see the areas with the ipcs command on the server. Since you can connect locally, but can't connect remotely, there is something wrong with how you told Oracle to connect remotely. Remotely can be on the same host if you have an @ in the connect string.
    >
    env | grep ORACLE
    ORACLE_SID=CHUCKY
    ORACLE_BASE=/home/oracle
    ORACLE_HOME=/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/
    seems like my variables are good.
    Well I dunno what to do I didn't think getting a simple login locally over tcp/ip would be so difficult, I am afraid of what will happen after this will work :) As it should be one of the easiest things on oracle what about the hardest :)Well, first try removing the trailing slash from ORACLE_HOME everywhere, including if you have it in the listener.ora. Then compare the tnsnames.ora ORACLE_HOME with your environment ORACLE_HOME. In fact, if you have a listener.ora, try renaming it to something else and restarting the listener.
    That error is normally due to a bad ORACLE_HOME or ORACLE_SID. Since your tnsping works, that indicates the ORACLE_HOME is good. But all that tells you is that the listener responds. Other causes may be inadequate processes in init.ora or case issues with the sid, or just generally not following the installation instructions. But are there installation instructions for debian?
    With multiple databases on one host, some kernel parameters may need to be increased.

  • Is XML Publisher causing shared memory problem..?

    Hi Experts,
    Since this week, many of the Requisition/PO are erroring out with the below errors or similar to these errors:
    - ORA-04031: unable to allocate 15504 bytes of shared memorny ("sharedpool","PO_REQAPPROVAL_INIT1APPS","PL/SQL MPCODE","BAMIMA: Bam Buffer")
    ORA-06508: PL/SQL: could not find program unit being called.
    -Error Name WFENG_COMMIT_INSIDE
    3146: Commit happened in activity/function
    'CREATE_AND_APPROVE_DOC:LAUNCH_PO_APPROVAL/PO_AUTOCREATE_DOC.LAUNCH_PO_APPROVAL'
    Process Error: ORA-06508: PL/SQL: could not find program unit being called
    Few days back we were getting heap memory error for one of the XML Publisher report.
    I heard that XML Publisher requires lot of memory for sources/features,So I want to know whether XML Publisher can be one of the cause for memory problem to occur or this shared memory is not related with XML Publisher sources at all.
    Please advice.
    Many thanks..
    Suman
    Edited by: suman.g on 25-Nov-2009 04:03

    Hi Robert,
    Thanks for your quick reply...
    Apps version: 11.5.10.2
    database version: 9.2.0.8.0
    As I am a beginner in this so dont know much about this.. Can you please guide me on this.
    DBAs has increased the shared memory and problem has resolved but here I am more concrened whether the XML Publisher was or can be one od the cause for shared memory problem. Is there any way to check that or this occurs randomly and we can not check this.
    Please advice something.

  • Multiple Users Accessing Shared Memory

    I created a shared memory enabled class, and it works great for a simple scenario.  But, it's currently not sufficient for my needs.  Here's an example of what I'm trying to accomplish, and the events happen in this order!
    User 1 writes data XXX to shared memory.
    User 2 writes data YYY to shared memory.
    User 1 reads from shared memory and I want him to get his data (XXX).
    User 2 reads from shared memory and I obviously want him to get his YYY.
    I do have a key I can use to differentiate my data but I don't know how to incorporate that in my process. 
    Is the solution to write a table, rather than my current simple structure, to my shared memory?  But if I do this how do I clean off the "used" row after it is read?
    Or is the solution to use some sort of instance of my class and reference the appropriate instance on each read?
    Here's my write:
      data: lo_shared_area type ref to z_cl_rdn_shared_area,
            lo_root        type ref to z_cl_rdn_memory.
    ****get a pointer to the Shared Area
      lo_shared_area = z_cl_rdn_shared_area=>attach_for_write( ).
    ****Create an instance of our root
      create object lo_root area handle lo_shared_area.
    ****Set the Initial value for our message
      lo_root->set_ptwy( ps_ptwy ).
    ****Set the root back into the Area
      lo_shared_area->set_root(  lo_root ).
    ****Commit and detatch
      lo_shared_area->detach_commit( ).
    Here's my read:
      data: lo_shared_area type ref to z_cl_rdn_shared_area,
            lo_root        type ref to z_cl_rdn_memory.
      lo_shared_area = z_cl_rdn_shared_area=>attach_for_read( ).
      lo_root        = lo_shared_area->root.
      try.
          ls_ptwy = lo_root->get_ptwy( ).
        catch cx_root.
          clear ls_ptwy.
      endtry.
      lo_shared_area->detach( ).
    Thanks,
    Mike

    Hello,
    Clearing shared memory will crash SAP   ie cleanipc.
    Need to increase memory parameters
    Check notes...
    146289    Parameter Recommendations for 64-Bit SAP Kernel   
    146528 "Configuration of R/3 on hosts with much RAM".                     
    regards,
    John Feely

  • No shared memory

    hi
    in BW PRD while executing a report we are getting an error
    error  message  " AN EXCEPTION WITH TYPE CX_SY_EXPORT_NO_SHARED_MEMORY  OCCURED, NO  SPACE  LEFT IN SHARED MEMORY"
    Edited by: sarat chandra bomma reddy on Apr 1, 2008 8:45 AM

    At OS level run :
    sappfpar check pf=<instance profile name>
    and correct the values mentioned in the instance profile as suggested in the error list.
    or you need to increase the Shared pool size in the DB profile.

  • Oracle Error 'ORA-27102: out of memory' - Shared memory parameters correct.

    Advice please!
    We’ve recently shut down our Oracle test server in order to increase file system capacity.  When we rebooted some of the databases wouldn’t start up.  It started the first 4 instances and then errored out saying “ORA-27102: out of memory“.
    I’m pretty sure it’s nothing to do with the file system because we actually reverted back to the old file system and the databases still wouldn’t start.  I think it’s more likely that something’s gone awry whilst the databases were actually running, and the problem has only manifested itself once we stopped and restarted them.
    I have researched the error and forud this artical and similar:  http://var-adm.blogspot.co.uk/2013/04/adjust-solaris-10-shared-memory-to.html 
    Everything suggests that Oracle is trying to create a larger shared memory segment than is allowed.  The thing is, we’ve never changed our shared memory settings, and one minute it was working, the next it isn’t.  To confirm this I checked the shared memory, which is as follows:
    sswift4# prctl -n project.max-shm-memory $$
    process: 926: bash
    NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
    project.max-shm-memory
            privileged      7.64GB      -   deny                                 -
            system          16.0EB    max   deny                                 -
    As suggested in the above article, I checked the alert log and found the ‘WARNING: EINVAL’ message which is as follows:
    WARNING: EINVAL creating segment of size 0x000000005e002000
    Converting this to decimal, it’s trying to create something of 1.5 GB, well within the shared memory settings, which suggests that this isn’t the problem.
    We are running Oracle 10g and 11g on Solaris 10 Sparc. The error does not seem to be instance specific, we have 8 instances on this box all with SGA max of 2000m. The server has 32GB of memory available.
    Any advice would be helpful.
    Thanks in advance.
    Debs

    Thanks for your quick responses - we have now resolved the issue.
    The shared memory value was set on the command line but not saved.
    Therefore once we rebooted it lost the configuration. this has been altered by our UNIX admin and all DBs have started without issue.
    Thanks
    Debs

  • How to increase the memory of oracle

    Hi,
    I am having oracle database version 11.0.1.6 on windows server 2003 R2.
    My Server Ram size is 12 GB.
    select * from V$SGAINFO;
    Fixed SGA Size     1335136     No
    Redo Buffers     12529664     No
    Buffer Cache Size     1073741824     Yes
    Shared Pool Size     176160768     Yes
    Large Pool Size     8388608     Yes
    Java Pool Size     16777216     Yes
    Streams Pool Size     8388608     Yes
    Shared IO Pool Size     0     Yes
    Granule Size     8388608     No
    Maximum SGA Size     1297321984     No
    Startup overhead in Shared Pool     58720256     No
    Free SGA Memory Available     0     
    I want to increase my memory for oracle because i need to insert 31 billion rows into a table with nologging. I am inserting them chunk by chunk and commit after each chunk. But it is taking 62 hours to insert the rows. So i think if i increase the memory i could reduce the time to insert the rows.
    I really am not sure whether i am thinking in the right way. Please advise. If i want to increase the memory please let me know how to increase it.
    Thanks in advance

    Are all columns in the WHERE clause indexed?
    Are statistics current & accurate for all tables & indexes?
    post EXPLAIN PLAN for SQL below
    PROCEDURE Pro_unpvt_usm_dr
    IS
    BEGIN
        FOR k IN (SELECT DISTINCT pr_id
                  FROM   unpvt_im_dr_e0322) LOOP
            INSERT /*+ append */ INTO unpvt_usm_dr_e0322
            SELECT pr_id,
                   nr,
                   col,
                   Corr(n, m) val
            FROM   (SELECT a.pr_id,
                           a.nr,
                           b.nr  col,
                           a.n,
                           b.val m
                    FROM   unpvt_usm_drpre1_e0322 a,
                           unpvt_im_dr_e0322 b
                    WHERE  a.pr_id = k.pr_id
                           AND b.pr_id = k.pr_id
                           AND a.col = b.col)
            GROUP  BY pr_id,
                      nr,
                      col;
            COMMIT;
        END LOOP;
        dbms_output.Put_line('POPULATED UNPVT_USM_DR_E0322');
    END pro_unpvt_usm_dr;

  • ORA-04031: unable to allocate 64 bytes of shared memory

    Hi All,
    We are performing System copy on a distributed environment with OS Windows 2003 and DB Oracle 10.2.0.4
    While importing the Database (ABAP) only ,we are facing error and 5 import steps are failing  in Import ABAP phase.
    Error is "ORA-00604: error occurred at recursive SQL level 1
    ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","select user#,type# from user...","Typecheck","kgghteInit")
    (DB) INFO: disconnected from DB"
    There is already one Oracel Instance OracleXX1 is runing this is the second instance and the server has around 1.75 GB RAM...i
    Can you please suggest what could be the error.
    Regards
    Ajay

    Dears,
    Please try increase your database parameter shared_pool_size in pfile and then try to resume the activity.
    Regards,
    Shivam

  • Increasing shared VRAM on a GMA X3100

    I have a white Macbook with the GMA X3100 graphics chipset (I think it is Santa Rosa). The system profiler says I have 144MB of VRAM. I have 2GB of RAM installed. My questing is, since the VRAM is shared memory from the system RAM, would I be able to get more shared VRAM to the GPU if I upgrade to 4GB? Or, even better, is there any way to allocate more of my current memory to share with the GPU? Any help would be greatly appreciated!

    From http://support.apple.com/kb/ht3246:
    GMA X3100
    The GMA X3100 allocates a base amount of 144 MB for video and boot processes at startup. For example, a MacBook (Late 2007) with 1 GB of RAM installed has 880 MB of memory available to Mac OS X and applications (1024-144=880).
    Products with the Intel GMA X3100 include:
    * MacBook (Late 2007)
    * MacBook (Early 2008)
    * MacBook (Late 2008)
    * MacBook Air (Early 2008)
    Note: Depending on the application or task being accomplished, Mac OS X may make additional main memory available to the graphics processor for texture use beyond the base amount mentioned above. The most common types of applications that request more system memory to be used as graphics memory are 3D and graphics-intense applications. Using an extended desktop or mirrored desktop may also increase the amount of system memory used as graphics memory. For example, the GMA 950 would allocate 80 MB, resulting in 432 MB of available memory (512-80=432). Likewise, the GMA X3100 would allocate 160 MB, resulting in 864 MB of available memory (1024-160=864).

Maybe you are looking for

  • How to create a report with data using the Crystal Reports for Java SDK

    Hi, How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API? I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel

  • InDesign and truncated hyperlinks after PDF conversion

    I have encountered what may be a similar problem to the one experienced by Greg Hogan posted on 10-01-2007 (http://www.adobeforums.com/webx?224@@[email protected]) I have a Dell Inspiron 6000 with a 1.5 GHz Pentium M processor, 2 GB RAM, Windows XP/P

  • Cf/dw error

    This is really holding me up now. i posted the other for some help with some simple insert cf code. i still dont have this working and ive tried everythng there is to try. ive got a feeling that there is something wrong either with dw or cf server. c

  • JTable column auto-maximum width

    Hi, Does anyone have an idea on how to make the JTable to support column auto-maximum width resize, like we always see in a microsoft's table component, you double click on the column seperater and the column resized to its maximum size according to

  • How do I transfer CS5 to my New Computer?

    Hello, I have a new computer to which I want to transfer Dreamweaver CS5 from my old computer.      I thought it would mean that I simply find a download link to CS5 and download, but I can't find a link to do this.   How can I transfer Dreamweaver C