Increasing size of tables , data in web pages

Hi I'm looking at data in web pages with lots of figures, however although I can change font size i.e. Safari preferences I can't seem to find one for digits etc..

Assuming that you're editing pages on the server, do you have the performance cache shut off on the server?
Roger

Similar Messages

  • How to fix the size of table data in html

    I want to fix the size of table data in html. ie if i want to insert only 50 char in a <td> field then it contain only 50 character, after that it switched to another line and contain the remaining character. Means <td> field wil not get automatically adjust there size according to data.

    you cant specify how many characters a td cell can have but u can specify the pixel width of a td cell
    <td width=50>
    as long as you have wrap text on, then text will not force the box size over the 50 pixels
    this wont limit it to only 50 chars though, you will probably have to use some javascript to cut the string down to size (unless youre using something like php or asp then that will do the trick too)

  • Font Size in preview and printed web pages

    Hi: I have had a long running problem that annoys me. ever since I purchased a 20inch LCD and changed my display to 1680x1050, web pages that I print appear very small. the same thing happens if I go through preview. Word documents do not have this problem; the font size there appears normal and is easily read.
    Is there a solution to this?

    There is a way to increase the default 72 DPI rez that saving a PDF uses, if your interested I'l try to find it.
    Nevermind, found it...
    To save PDFs in better resolution from Preview, try these Quartz Filters courtesy Jerome Colas...
    http://discussions.apple.com/thread.jspa?messageID=6250289&#6250289

  • I am using my first apple product, mac book pro.  somehow i FIGURED OUT HOW TO INCREASE THE FONT FOR SEARCHES AND WEB PAGES, BUT THE FONT IS TOO BIG AND FOR THE LIFE OF ME I CAN NOT FIND WHERE TO GET THE SCREEN BACK TO NORMAL, HELP ANYONE?

    I am new to Apple, somehow I figured out how to make font of Web pages bigger, but it is too big and I can't use sites properly.  for the life of me I can not how to get my font size reduced.  Help anyone? thank you, sbb

    Probably command-minus will do the trick.

  • Copy and paste a Table from a web Page

    I want to copy this Table at the link below into a Pages Document so I have these shortcuts/key combos nearby in case of disaster (For example, I did not know that you boot off a CD by holding the C key upon restart.
    http://docs.info.apple.com/article.html?artnum=75459
    How do I do this and retain the Table Format?
    (New to the Mac and Pages)
    Thanks

    That web page has several tables so you'll need to do this for each one. First, don't use Safari, use Firefox or Camino. Safari doesn't "see" the tabs in the tables. Select the text of the first table & copy. Now, go to your Pages document & create a 2-column table with a header row. Click in the first cell & paste. In previous versions of Pages you had to create the table with the exact number of columns or the pasted table filled rows across before pasting in the next row. I tried this without a header row & everything pasted in the first cell. Adding the header row, everything pasted nicely.

  • How to copy the SE11 table view as Web Page Format?

    SAP Experts,
                        Good Morning..! I have to take a Copy SE11 Table View as a HTML format.
                        Please tell me the way to take a copy as Web page?

    Hi,
         once you display all fields.
    Then goto EDIT menu there you press Download you will get save list as which format like: Un covered
                     spread sheet
                     rich text format
                     HTML format.
    then you choose which ever you want and then save it in ur computer.
    Regards
    Raghavendra.D.S

  • Servlet data to web page

    Hi,
    I am working with a web page, in which I have created a form for user input. I would like to send a message to a servlet requesting database status to validate the user input prior performing some client side javascript. I just do not know how to transfer the data returned from the servlet into javascript variables. I do not want to post the data or refresh the page, just use the returned data for javascript performed validation. Any help would be appreciated.

    Dup thread, http://forum.java.sun.com/thread.jspa?threadID=702538&tstart=0

  • Print table data in Web Dynpro

    Hi all,
    I've seen that this topic was already discussed a lot in this forum. We need a print button in our Web Dynpro, when it is pushed all table data will be printed.
    Therefore my question is: Has anyone already implemented a working solution for this? What are the basic steps of your solution?
    Your answer is appreciated.
    Thanks, Carmen

    Carmen,
    Refer "<b><i>Printing a Table</i></b>" section in <a href="/people/sap.user72/blog/2006/05/04/enhancing-tables-in-webdynpro-java-150-custom-built-table-utilities Tables in WebDynpro Java</a>.
    Bala

  • Option to Add Meta Data to Web Page on V3 dashboard

    Where is the option to add mata date in the V3 dashboard?

    Title Tags & SEO
    I worked fine for me but if you want to be sure you can put you own header information into the HTML in your page. I’m going to ramble on because other people may find this information useful
    Things have change with search engines and the only thing that is important is your title information in the header and how you write it.
    First let's talk about meta tags. Meta elements are HTML or XHTML elements used to provide information about a web page for the search engines and website users.
    Such elements must be placed as tags in the head section of a HTML document. These elements are the:
    Title Tag,
    Description.
    Keywords (No one uses these anymore and you can get spam "points" for overuse of keywords on Bing and Google, so just forget them. If you have keyword stuffed "spammy" ones, you probably want to fix those.)
    For now it’s back to the basics with SEO! And nothing is more basically important to a site than properly written title tags. You know the ones that used to appear in the little blue bars in your browsers. Most modern browsers try to conceal these, though that doesn't stop them being helpful!
    So what is a title tag? Why is it important to SEO, and how do you write the darn things?
    A title tag is THE MOST IMPORTANT SINGLE TAG in your page. It tells the search engines what your page is about. It is still vitally important to paid or organic SEO strategy.
    Think of title tags like the title of the chapter of a book. It tells people and search engines what your page is about.
    Title tags are also part of what makes people decide whether to visit your site when it shows up in the search results. The title tag should contain important keywords to help the search engine determine what the page is about.
    NOTE: Every experienced SEO has their own unique methods to doing this, so I'm going to give you best practices along with some of my methods
    When you do a search on Google, the information that shows up is in the title tag so you need to write title tags for humans but format them for search engines.
    Every page on your site has an opportunity to rank high on search engines for a particular keyword,
    Quick Checklist
    When you're writing your title tag what do you need to know? Here's a quick checklist with some tips on how to write optimized title tags:
    Length: Title tags should be a maximum of 70 characters long, including spaces.
    Keyword Placement: Your most important words (keywords) need to be first in your title tag, with your least important words being last in the title tag (most to least). 
    Keyword Separation: Use pipes | to separate important (keyword) phrases (no commas, underscores, dashes or any other punctuation unless the keyword is written that way).
    Wording: Keep your important phrases short and simple. Leave out words that would make it read like a sentence. (e.g., and, if, but, then, etc.)
    Company Name: If your company name is not part of the important (keyword) phrases, put it at the end of the title tag or leave it out. If it is part of your important words, put it as the first words in the title tag. Some SEOs will tell you to leave it out. You can leave it in for branding purposes – so people will see the brand and click. This isn't valid for all sites.
    DON'T DUPLICATE Title Tags: They must be written differently for every page. Don't mass replicate your title tags.
    Make It Relevant: Title tags must be written to be descriptive of the content on the page. (e.g., the About Page would be:
    About | Important Keywords | Company Name
    or
    Important Keywords | About Us | Company Name.
    Google & Title Tags
    Sometimes Google doesn't like your title tag. In fact, sometimes Google thinks it can pick a better one, so it will rewrite the tag for you. There are several places it might get this information, most of them you won't prefer to one you crafted yourself.
    While there isn't any assurance your title tag won't be replaced, make sure you write a title tag that is page related, content descriptive, short and sweet, and not keyword stuffed. This is your one defense.
    Keyword Stuffed Title Tags
    You've probably come across badly written title tags that try to rank for everything or repeat a word over and over. Keyword stuffing is the worst offense when it comes to title tags. (You will be penalize)
    Say your site is trying to rank for Blue Bells and Yellow Bells. Many times you will see the main keyword repeated multiple times across the title tag. It might appear like this:
    Blue Bells, Yellow Bells, All Types of Bells | Bells Bells and More | Doors.com
    This is bad title tag writing. You don't need to repeatedly write the keyword. Google especially can pick up the keywords like your eyes can read them, so you would best to rewrite this as
    Blue & Yellow Bells | Doorbells | Doors.com
    We removed the extra words, combined the products (if possible you would split these products to separate pages, a blue and a yellow, but this isn't always feasible or desirable) and added a category keyword which would appear in the middle of the title tag on all doorbell related page titles, then end it with the domain name (again this is for branding purposes – there are also good reasons to not do this, it depends on the SEO).
    Now our title tag is short, sweet, simple, and to the point. We have also categorized it and added in branding for good measure.
    We also took out the word "and" and replaced it with an ampersand (&) so that you don't accidentally relate the two items and make Google think you want people who are looking for Blue AND Yellow Bells.
    And there you go, a basic lesson in title tag writing. This can be the most challenging and fun part of any SEO's work! Or should that be "Inbound Marketer's" work?
    Some Title Tag Writing Examples
    Let's look at a few examples of writing title tags with actual examples.
    If your important words (keywords) were "Charlie Sheen" and "Winning" your title tag would be written in that order:
    Charlie Sheen Winning
    Charlie Sheen would be the first words in the tag.
    Now what if we had more than one set of words? What if my keywords were "Charlie Sheen Winning" and "Tiger's Blood"? Your title tag would still be written with "Charlie Sheen Winning" as the first words in the tag. Then you would add a pipe | and "Tiger's Blood" as the second phrase:
    Charlie Sheen Winning | Tiger's Blood
    Don't use hyphens, underscores, commas or any other type of character – just pipes.
    Now what if we had more than one set of words and a company name we were not worried about optimizing for (the company name was not part of the reputation issue). If my words were "Charlie Sheen Winning" and "Tiger's Blood" and "CBS", you would separate these three phrases with pipes, with CBS last and farthest from the beginning, which Google sees as the least important phrase:
    Charlie Sheen Winning | Tiger's Blood | CBS
    The company name can be repeated in every title tag as long as it as not part of the important words and appears at the far right end of the title tag.
    What about sentences? Couldn't you just write a sentence such as "Charlie Sheen Says Winning And Tiger's Blood And Gets CBS Riled Up"? You could, but those extra words like "says", "and", and "riled", dilute your important words and make them less important to content, so best to keep it short, simple, and clear. Leave out the extra words.
    Once you’re finish with all of this its time to submit you pages to the search engines. You will need to create an XML & HTML sitemap.
    WebAssist Surveyor – Build and submit HTML and XML sitemaps in Dreamweaver
    http://www.justdreamweaver.com/blog/2008/07/webassist-surveyor-build-html-and-xml-sitemaps -in-dreamweaver/
    Don’t forget to check each page ranking monthly and make the necessary tweaks to your title information as needed. (Each page needs to rank for a unique key word on your site)
    I’m going to stop now but that’s only the start of organic search engine optimization.

  • Need to grab the data from Web Page and send it to SAP using PI

    Hello Experts,
    I need to grab the exchanges rates from the below link.
    http://www.cbr.ru/scripts/XML_daily.asp?date_req=09-06-2011.
    This link returns an XML . I need to get the data from this XML page and post it to SAP ECC using PI.
    My requirement is that, process should start from the ECC and grabs the data from the web page which gives you the XML and post this data into ECC using PI. We have a RFC written in ECC side to post the data in ECC.
    Please help me to identify the adaptor's needed and what should I need to do to initiate the process from ECC.
    Would it be a Async or Sync process ?
    I would really appreciate the inputs.
    Thanks.
    Gaurav.

    Hi,
         Any particular reason that you want to go for a sync process as then you would need to either use a BPM (RFC to BPM where you use sync/async bridge to get the xml file from the specified link and then send the response back to ECC) or go for a synchronous Java proxy on the receiver side which will grab the exchange rates and then map back to the RFC response structure. In this case, you can avoid the BPM.
    Else, as mentioned in Michal's blog, you can break it up into 2 seperate scenarios. RFC/Proxy to File and then File to IDoc/RFC/Proxy which will get the exchange rates into ECC.
    Another option can be Proxy --> PI --> ECC(IDoc/Proxy/RFC). Here you can grab the exchange rates from the link in your message mapping through a UDF.
    Regards

  • Corrupt data on web pages

    I have been using Firefox for several years....didn't even know it had upgraded to 7....until last week when I tried to log onto my home page of Hughes Net....it gave me a message that there was corrupt data....try again. Yes you could get onto the page with the second attempt....but logging into my email was the same....and there were odd little dots in front of all my messages. Every web page I went to said the same thing...althought Firefox made it look like the web pages were the problem. It was also very slow and my computer has been since. I uninstalled. Waited a few days, went to the website and downloaded again today....same problem. I have uninstalled again and won't be installing again, til I have a solution...much as I dislike IE. Thanks for any help anyone can send my way !

    Thanks, I really did not have the option in Privacy for Show Cookies, but I could click on a button that would allow me to remove cookies and I did remove any that I did not know the web site. I cleared the cashe before that. Stilll the problem...rebooted tried again. Thanks for you help, but it didn't solve the problem and since I have to keep clicking Try Again on the Corrupt Data...it takes up to 4 attempts to get into any way page...I guess I will just uninstall it. I will get over it. I am a nurse....am used to accepting change :) I will just learn to like a new browser. Funny, I never had a bit of problem before the upgrade...
    Thanks again.

  • Move data from web page to a crystal report

    I am using Crystal Reports 10 and Dreamweaver to create an asp page.  I would like to know how to access a crystal report from the asp page and pass the data that is on the asp page to the crystal report.  Is this possible?

    <p>There is also a very specific sample found on the Diamond site that was originally written by some one in support that should be very useful.</p><p><a href="/node/494">http://diamond.businessobjects.com/node/494</a></p><p>This sample takes an ADO recordset and passes it to a report at runtime. The sample also displays the report in an ASP page. The only change you would need to make is to populate ADO recordset with data from the web form. Sorry I don&#39;t have a sample to do that. <br /></p><p>Rob Horne</p>

  • How to add button ui element in alv table data in web Dynpro ABAP

    Hi Experts,
    I have one requirement,
    Actually I was devloped normal table in web Dynpro ABAP
    in that i have one column Display as a button .
    when i select that button need to display some data.
    same requirement i need to devlope in alv table.
    i am going to attach file please check.
    Thanks in advance.
    Regards,
    Subba Reddy.

    Hi,
    You can create Button in your ALV table column with below code
    DATA lo_button              TYPE REF TO cl_salv_wd_uie_button.
    CREATE OBJECT lo_button.
        CALL METHOD lv_value->if_salv_wd_column_settings~get_column
          EXPORTING
            id    = <your column name>
          RECEIVING
            value = lo_system_select_hdr.
        lo_button->set_enabled( value = abap_true ).
       lo_button->set_text( value = 'Avaliable List'  ).
        lo_button->set_tooltip( value = 'Avaliable List' ).
        lo_system_select_hdr->set_cell_editor( value = lo_button ).
    And for button click action,
    Create a method (say SHOW_DATA( ) ) with on_click event handler.And when you click button on your ALV table, SHOW_DATA( ) method will trigger.
    Thanks
    KH

  • Increasing  size of table maintenance generator screen

    Hi
    normally when we create table maintenance generator for a ztable the size of the maintenance screen will be standard
    can any one tell how to increase the size of that screen.
    vamsi

    Hi
    Check the links
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
    /message/2831202#2831202 [original link is broken]
    Reward points if useful
    Regards
    Anji

  • Working with table data in Web Application Designer (WAD)

    Hello experts,
    I integrated two queries as analyse web items into a web template. To generate new facts, there is a need to compare data of both tables. Unfortunality there is no possibility to merge both quiries in one single query. It has to be done in  WAD.
    Is there a way to read the data of the tables (query output as analyse web item) into a data structure, i.e. an array structure of javascript to operate with them?
    Regards,
    TB

    Thank you. The APD could be a good approach.
    What you couldn't know, the two queries I mentioned are coming from two different BW mandators (We have the need to work with a two mandator model).
    It won't be possible to integrate queries from two different mandators in an APD, right?
    Regards

Maybe you are looking for