Increasing the font size for printing in FB03

Hi All,
I am trying to print a FI document from FB03.
But, i am getting print only 1/4th of the A4 size paper.(i mean only 25% of the page is covered and remaining 75% is blank) Now, I need to increase the font size so that it covers more portion of A4 size paper.
I tried to change "Format settings" in Print settings but in vain.
Please advise
Thanks & Regards,
Pavan Kumar.

Hello,
Please make sure that the format settings that you have changed has taken effect.
X_65_200 is suitable and it gives the print with 90% of the page.
When you change the format settings it will change the font size according to properties.
Regards,
Ravi

Similar Messages

  • Is there a way to increase the font size for the "songs" and "artists" lists in the new music app for iPad 2 (iOS 5)? It is too small for me.

    Is there a way to increase the font size for the "songs" and "artists" lists in the "music" app for iPad 2 (iOS 5)? It is smaller than the previous version.

    falkner09 wrote:
    is there really no fix for this?
    It would depend on your definition of "Fix"
    Your iPod touch running OS 4.2 has a ZOOM feature which will enable you to see the screen more clearly.
    To turn Zoom on or off got to:
    Settings > General > Accessibility > Zoom and tap the Zoom On/Off switch.
    _To Zoom in or out_:
    Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
    Increase magnification: With three fingers, tap and drag toward the top of the screen (to increase magnification) or toward the bottom of the screen (to decrease magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t lift your fingers on the second tap—instead, drag your fingers on the screen. Once you start dragging, you can drag with a single finger.
    _Move around the screen_:
    When zoomed in, drag or flick the screen with three fingers. Once you start dragging, you can drag with a single finger so that you can see more of the screen. Hold a single finger near the edge of the display to pan to that side of the screen image. Move your finger closer to the edge to pan more quickly. When you open a new screen, Zoom always goes to the top-middle of the screen.
    _Large Text_:
    Large Text lets you make the text larger in alerts, and in Calendar, Contacts, Mail, Messages, and Notes. You can choose 20-point, 24-point, 32-point, 40-point, 48-point, or 56-point text.
    Set the text size: In Settings, choose General > Accessibility, tap Large Text, then tap the text size you want.
    I hope this has helped a little - other than this option I think it pretty much is what it is.
    BTW - This information can be found on page 208 of the iPod Touch iOS 4.2 Users Guide.
    Best wishes..
    Ricky

  • How to increase the font size of  print ouput in SAP 4.7

    Hi,
    How to increase the font size of the ouput of Write statement on PRINT ?  in 4.7
    THANKS IN ADVANCE
    MOOSA

    You can do that using the PRINT-CONTROL Statement.This will only work when you send the list to the printer.Sample code is as below :
    REPORT zfont NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
    Start of print-control
    NEW-PAGE PRINT ON.
    PRINT-CONTROL FUNCTION 'SF000'.
    WRITE: / 'This is CPI 20'.
    SKIP.
    PRINT-CONTROL FUNCTION 'SF020'.
    WRITE: / 'This is CPI 6'.
    SKIP.
    PRINT-CONTROL FUNCTION 'SF008'.
    WRITE: / 'This is CPI 12'.
    Depending on your SAP printer device, this may also work
    PRINT-CONTROL FONT 1 LPI 6.
    you can try to change font and LPI numbers
    WRITE: / 'font 1 lpi 6'.
    PRINT-CONTROL FONT 2 LPI 6.
    WRITE: / 'font 2 lpi 6'.
    PRINT-CONTROL FONT 3 LPI 6.
    WRITE: / 'font 3 lpi 6'.
    End of print-control
    NEW-PAGE PRINT OFF.
    *--- End of Program

  • How can I increase the font size for safari?

    Does anyone know how I can increase the overall font size when in Safari?  I recently purchased a 21.5" iMac and while the screen is brilliant, the font size is very small when I'm using Safari.  Also, the web page is about a 1/3rd of the size of the screen.  Would anyone know how to make it such that a web page is across the full screen?  Otherwise, what's the point of such a big screen?
    Thanks!!

    To get full screen view, look down at right hand corner of page.
    You will see hash marks at a 45 degree angle in the corner.
    Set pointer on it, and grab out to full edge of screen.
    This works for all Apps including images.
    I do this as default, being I sit about 5-6 feet from the screen.
    Then use Pinch- Out to expand the page within the Browser.
    Pinch-Out works for all Images loaded on the screen as well.
    *You may know this already, grab browser window at the top edge,
    and move it near the left edge of screen first.
    I'll throw in a handy viewing tip of items saved on the desk top,
    or within the Finder so that you don't actually have to launch the item.
    Simply highlite it, then hit Space Bar.
    This is part of Quick View,,, The Eye Ball Icon in header of viewing Finder does the same thing.
    This works for all video files as well for a Quick View, w/o running huge ram loads.
    Hit Space again to turn it off , Quick View.
    You can leave it on if browsing stack of files, then arrow down or up for those views.
    Cheers

  • How do I increase the font size for safari and apps

    The new iPhone 5 has a larger screen. However, everything seems smaller. The font in most apps can hardly be read. How do I increase the default font for everything except messaging. I increased the font in the settings, which works for messaging, but that doesn't work for anything else.

    Thanks Shadowdancer, that does help a lot.
    Unfortunately Dark Menu Bar hides some of my App's dock icons,  so can't use it.
    I used instead:
    System Preferences > General> Appearance
    - Select Graphite for Buttons, Menus etc
    - Select Graphite as Highlight color
    - Turn off "Use LCD font smoothing" > the last item at the bottom of General
    The Increase Contrast Button worked best for me, it draws a box around most buttons and seems to make them darker.
    System Preferences > Accessibility:
    - Turn on "Increase Contrast" which not only turn on Reduce Transparency but adds a few other things to help improve definition between lines / fonts.

  • How to increase the Font size for elements in BSP Application

    Hi,
    I have an requirement where i need decrease the font size of the drop down list element at header level and table view level.
    Thanks in advance.
    Regards,
    Warun.

    See the example below as Jain just described:
    data: pv_drop_find1 type string value '<select ',
          pv_drop_repla type string value '<select .... style="font-size: 7 pt"'.
            <bsp:findAndReplace find     = "<%= pv_drop_find1 %>"
                                replace  = "<%= pv_drop_repla %>" >
                  <htmlb:dropdownListBox id   ....>
            </bsp:findAndReplace>
    Regards,
    Alexandre Rocha

  • How to increase the font size for text in the ibooks' dictionary

    In iBooks for iOS 7, I know how to resize the text of my ebooks.
    But how can I resize the font of the in-built dictionary?
    Can anybody help me?

    The dictionary display appears to be using Dynamic Type, so you can increase its size via the Larger Type function. However, this will also increase type size in a number of other application as well (Messages, Mail, etc.).
    Settings app > General > Accessibility > Larger Type (turn ON, the use the slider to set the type size)

  • HT2523 Is there a way to increase the size of textedit text on the screen without increasing the font size? (as can be done in WORD for MAC)

    In Microsoft Office for Mac WORD I can make text appear larger on the monitor screen without increasing the font size for printing purposes.  I have not been able to figure out if/how this can be done in TextEdit.  In TextEdit, if I set the font size to between 10 and 12, the text appears very small on the screen.  But if I increase the font size, the font size will be way too large when I print such a document.

    Thank you very much for your prompt reply and suggestion. 
    Actually after I posted my question, I saw link to Text Edit viewable font, which pointed out the small up and down arrows in the lower right corner of the Text Edit screen. 
    However, it is also good to keep in mind the Universal Access options.

  • How to increase the font size of the ALV Print

    Hello Experts,
    How can we increase the font size while printing an ALV report? I tried searching the fourms for a solution from the previous postings, but could not find a "clear" answer. Thanks for the help.

    Hi,
    The size of the page is fixed, and if all the fields have to be there, then the font size will have to be decreased. So, if the no. of fields are less, it automatically increases thefont  size and prints.
    The size of the font in the printout is directly related to the line-size of the output on the screen. When we do the print, we check that the output format is optimal for the size of the line. For example, in the print dialog, check that the format is related to the size of your line. If there are 132 characters across, then choose format like X_65_132.
    thanks,
    Archana

  • How to increase the FONT Size in a report while printing in SAP

    Hi ,
    Can anybody let me how how to increase the Font size  while printing a report in SAP .
    Thanks
    Dhaval..

    hi Raje,
    WELCOME TO SDN
    use <b>PRINT-CONTROL</b> option
    PRINT-CONTROL FUNCTION 'SF000'.
    WRITE: / 'This is CPI 20'.
    SKIP.
    PRINT-CONTROL FUNCTION 'SF020'.
    WRITE: / 'This is CPI 6'.
    How to change font sizi in a classical report?
    REgards,
    Santosh
    Message was edited by: Santosh Kumar P

  • Can the font size for Nokia 3250 be increased for ...

    Sir,
    I am having Nokia 3250. The font size in the mobile looks very small. I would like to know if there is any way we can increase the font size for viewing either by changing its setting or by putting any software in it.
    Pls help.
    Regards
    [email protected]
    INDIA

    You need to download and install an additional program to make the fonts bigger, it does not cost much (€9.95):
    http://shop.psiloc.com/en/Application,262290,Psiloc+Font+Magnifier

  • How to increase the font size of the report output in the printout.

    Hi Team,
    i have a requirement like to print the report output as a direct print from an internal table.I am using the below mentioned code, the output is printing fine but the Font size of the output text is so small so i need to increase the font size of the text of output data.
    call function 'GET_PRINT_PARAMETERS'
       exporting
         immediately                    = 'X'
         line_count                     = 65
         line_size                      = 320
         mode                           = 'CURRENT'
         no_dialog                      = ' '
         release                        = 'X'
         user                           = sy-uname
       importing
         out_parameters                 = st_param
       exceptions
         archive_info_not_found         = 1
         invalid_print_params           = 2
         invalid_archive_params         = 3
         others                         = 4.
      if sy-subrc eq 0.
        new-page print on parameters st_param no dialog.
    could you please suggest me how to increase the font size while printing the report output..
    Thanks in Advance.
    Puneet.

    hey,
    in our system when we click on print. on widow is coming.
    there is a properties button.
    we click on it.
    there FORMAT----AND then we select forat from there and then printing .
    not sure. but check on ur system. is there properites button.
    HI,
    READ THIS,
    You can specify attributes such as the character width and font size in the device type formatting yourself.
    contact ur basis team .
    in the report PRINT-CONTROL SIZE option is there. try to find more o this.

  • How to increase the font size inside Mail.app

    Mail essentially has two panels:
    - a left panel showing the header and first couple of lines of incoming emails;
    - a right panel showing the contents of an email that has been selected in the left panel.
    Using Mail's preferences, I was able to increase the font size of the header information of emails in the right panel.
    However, I was unable to find a way to increase the font size for messages in the left panel or for the contents of an email in the right panel.
    Is this possible? If so, how can this be done?
    Thank you.

    You can't for incoming emails. When viewing an email the ⌘+ key combination will increase the font in the viewed email incrementally.
    Or you can do it thru this menu option:
    OT

  • Need to increase the font size of SAP printer

    Hi all,
    We had some new HP printers HP4015 which needs to print from SAP . we created the new device type ZHPLJCM1 after checking correct device type for it from HP printer site. For some users printouts are coming in small fonts ,they wanted it to print in big fonts .
    These are some of the  t codes  that they use KAH3 , FB03 , Y_DEV_39000067.
    we tried to change the printer fonts in SE73 of that particular device type and increased the font size , but that also ended in vain.
    Kindly suggest possible ways by which we can solve this issue.
    Please let me know if more information are needed.

    Hi,
    Is this ABAP lists, sapcript or smartforms? For sapscript or smartforms, you need to specify the font size in the paragraph/character formats for sapscript and in the smartstyle for smartforms.
    For ABAP lists, the font size is selected based on the format used. e.g. If you create a list with format X_65_255, it should print in landscape and the font size is calculated based on the size needed to fit 255 characters into a page. If the format is X_65_132, then the font size is calculated based on the size needed to fit 132 characters into a page so it is a bit larger.
    Regards,
    Aidan

  • Increasing the font size of an ALV report while printing it.

    The requirement is to increase the font size of an ALV report while printing it. The ALV Report is coded using the Factory method.
    I could find a class called CL_SALV_ITEM with a SET_FONT method but I am not sure how to link it with the CL_SALV_TABLE class from which the display table has been created. I even tried checking the report display in SPOOL transaction SP01.But I guess the font shown there depends on the SAP GUI settings.
    Do you have any suggestions?
    Thanks and regards
    Sathya

    The status bar is a fixed fontsize which does not change. While I have no problem reading the time off the status bar you should also have the time on the lockscreen and/or glance screen with a much larger font so I do not really see the issue.
    I have all my music on SkyDrive so would not know for sure, but check out THIS to see if it serves your needs.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Maybe you are looking for