Increasing the ipod's preamp level output

Hello everyone, I'm not sure if it's possible or not, but is there a way to increase the preamp output level through the dock connector? I'm using the ipod video 60 gig with my Alpine car audio system, and I would like to increase the output to match that of my cd's, and tuner. Any help would be great.
thanks...v

No, thi sis not adjustable. Sorry.
Sometimes stereos have an adjustment to raise/lower the volume level of external inputs to match the radio/cd player.
This prevents a loud jump when swtiching from one to the other.

Similar Messages

Increase the size of list layout output of transaction vl10c.

Dear All,
Is it possible to increase the size of the list output of standard transaction VL10C in printout??
Any clues would be of great help.
Thanks,
Aditya

Look in program V50R_USEREXITS pay particular attention to #1 below. Please reward points if this is what you are looking for.
This is just for forward navigation to find all the userexits in
Delivery Due List processing.
1. Add field to list-display
Userexits for additional fields on list display
use append-structure in DDIC at structure SHP_VL10_ITEM
and ad field value in one of these routines
*INCLUDE LV50R_VIEWG02.       "POS_ITEM_FILL_USER:       SD/MM-orders
*INCLUDE LV50R_VIEWG03.       "POSTAB_VEPVG_FILL_USER    SD-Index
*INCLUDE LV50R_VIEWG06.       "POSTAB_VETVG_FILL_USER    MM-Index
*INCLUDE LV50R_VIEWG07.       "POSTAB_DELIVERY_FILL_USER Delivery item

Can't seem to crop and then save the crop -and- Undo levels

Hi there. I've used Corel Photo-Paint for many years, but now jumping to PSCC. It's much better in many ways, but I'm still trying to find my way around it. One simple thing that I can't seem to figure out is how to crop an image and keep it cropped. What I mean is, I have an open image, then with the Crop tool I crop it to a smaller size. But then when I try to select the (smaller) image to drag onto another open image, it selects the whole original image. I have the box for "delete cropped pixels" checked. The same thing happens if I save the cropped image and then open it again... the full original size of the image is still there, though it only shows the cropped section. What do I need to do differently? It would seem to me that what I'm getting is the effect if I unchecked "delete cropped pixels," but I definitely have that checked.
Also, is there a way to increase the number of Undo levels? I'm only getting one.
Thanks!

I found another thread where someone asked the same question and was answered that if any of the objects in the crop were "smart objects," then the Crop would not work destructively. But in my image, best I can tell, the two layers are NOT smart objects (right-clicking on them gives me the option to make them smart objects). So apparently that is not the answer in this case. Anybody know what's going on? It's probably something simple, but I just can't seem to figure it out.

How much power does the iPod output?

I tried measuring the power output via the headphone jack, and the reading was so small my multimeter could barely measure it. It peaked at about half a volt, and thats with a very loud song with the music cranked up all the way. It averaged about .3. That seems REALLY low, maybe enough to power the cheap earbuds the iPod comes with, but not enough for more power demanding professional headphones or other non-powered audio devices. I called every number apple has to call, and it seems no one in the entire company knows anything about their own product when it comes to power output.
Also, what is the power output for the serial port on the bottom of the iPod? I couldn't measure that with my multimeter without splicing some wire which I wasn't about to do.

Nope, I don't mean the volume level. I mean the actual measurable ammount of electricity that the iPod is physically capable of outputing via the headphone Jack. I imagine the hard drive and screen ***** up most of it, so that the full potential cannot be tapped, because frankly the apple designers had no reason to give it any significant booster space.
No, but having the volume at a max and and playing a variety of different types of music will give one a decent idea of the average power output, which is about a .3. Seems it did show me something, buddy. accurate min, max, and average power should not be that hard to caclculate.

We have a new iPod Classic and would like some help in choosing "Import Settings" (under Peferences) when loading the iPod from the Mac. We want to be sure that we can maintain a constant sound level. Used with Bose sound dock. OS 10.6.8 iTunes 10.6.1.

Using an iPod Classic on a Bose sound dock....when loading the iPod from the Mac, what "Import Settings" (under iTune "Preferences"), should be used to maintain a constant sound level when playing music? Mac OS 10.6.8, iTunes 10.6.1.
There are many Import Settings available and it is somewhat confusing. Any suggestions?

Go to iTunes>Preferences>Playback. Tick "Sound Check."
iTunes: About Sound Check

HT4437 using airplay from my ipod touch 4th gen. no audio output from the tv. on the ipod it shows that it is streaming to the apple tv. whats the problem

i get the air play icon on my ipod touch. when i click it the output from my ipod stops but i dont get any audio from my tv. whats the problem?

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How do I increase the trace level of the dev_server file?

I have a dual stack SCM system and the java stack will no longer start. I'm seeing some messages in the dev_server0 and dev_server1 files, in the work directory. But at the top of those files, it says the current trace level is at 1. I would like to have some further details as to the error. How do I increase the trace level of these files? Thank you.
~TJ

You can increase the trace level by changing the instance profile
set "jstart/TRACE = 3", (this affects the server0 process)
set "rdisp/TRACE = 2" (this affects the ICM).
Then Restart the ICM and the server process (e.g. from the SAP MMC -
there is no need to restart the entire instance),
hope this helps.
Regards
SuneeL

Goods Issue to increase the stock levels in a plant

Folks,
I am not a MM guy and I am trying to increase the stock levels in a plant using a Goods issue.
1.     Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
2.     What are the relevant movement types when GI is made w/o reference to a Purchase Order?
3.     Can GI be made with reference to any other entity/object other than PO?
Thanks

1. Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
No u can't ..u have to do Goods receipt for a PO
Raise a PO for the same material and do GR
2. What are the relevant movement types when GI is made w/o reference to a Purchase Order?
u cant do GI for PO
3. Can GI be made with reference to any other entity/object other than PO?
GI aganist cost centre, production order, reservations ....
the easier way to bring in stock of a material is to do intial entry thru MB1C with mvt type 561.

How to increase the font size of the report output in the printout.

Hi Team,
i have a requirement like to print the report output as a direct print from an internal table.I am using the below mentioned code, the output is printing fine but the Font size of the output text is so small so i need to increase the font size of the text of output data.
call function 'GET_PRINT_PARAMETERS'
   exporting
     immediately                    = 'X'
     line_count                     = 65
     line_size                      = 320
     mode                           = 'CURRENT'
     no_dialog                      = ' '
     release                        = 'X'
     user                           = sy-uname
   importing
     out_parameters                 = st_param
   exceptions
     archive_info_not_found         = 1
     invalid_print_params           = 2
     invalid_archive_params         = 3
     others                         = 4.
if sy-subrc eq 0.
    new-page print on parameters st_param no dialog.
could you please suggest me how to increase the font size while printing the report output..
Thanks in Advance.
Puneet.

hey,
in our system when we click on print. on widow is coming.
there is a properties button.
we click on it.
there FORMAT----AND then we select forat from there and then printing .
not sure. but check on ur system. is there properites button.
HI,
READ THIS,
You can specify attributes such as the character width and font size in the device type formatting yourself.
contact ur basis team .
in the report PRINT-CONTROL SIZE option is there. try to find more o this.

Increase of storage space in the IPOD Nano MA002LL/A

I wish to know whether it is possible to increase the storage space in the above model of IPOD Nano MA002LL/A
coz there are two models 30 Gigs and 60 Gigs i wish to know whether it is possible to convert the 30 Gig model into a higher capacity model after purchase.
MA002LL/A Windows XP Pro

It appears that you're considering purchasing a 30gb
5th generation iPod. In your original post, you
called it an iPod nano - the nano is a different
iPod. Also, you have posted this topic in the "iPod
with color display' forum, which is actually designed
for the fourth generation color iPods. That's why I
was confused.
The iPod does not have a USB port. You can use an
external USB drive to back up your music throught
your computer, using iTunes though. Is this what
you're asking?
Sorry about the confusion. I am new to this tech. Well if this model of IPod does not have an USB port how does it communicate with the computer. does it have any kinda IR or bluetooth

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

If that's the best you can do why don't you get on another forum?

How 2 Increase the debug level in Source-qualtifier & workflow in informati

Hi ,
I have a basic question related to the Informatica Debugging.After raising an SR.
from the Oracle support guys I am advised to increase the Dubug level.Where and how do i do that ,please guide me.
below is the brief note out of SR
Please increase the debug level for Source-Qualifier and the Workflow ,to get more details on the error.
Thanks and regards.

Please post this question to the [OBIA Forum|http://forums.oracle.com/forums/forum.jspa?forumID=410]
Cheers,
C.

How 2 Increase the debug level in Source-qualtifier,workflow in informatica

Hi ,
I have a basic question related to the Informatica Debugging.After raising an SR.
from the Oracle support guys I am advised to increase the Dubug level.Where and how do i do that ,please guide me.
below is the brief note out of SR
Please increase the debug level for Source-Qualifier and the Workflow ,to get more details on the error.
kindly provide me the steps to increase this so-called 'Debug-level'.Thankyou in advance.
Thanks and regards.

Please post this question to the [OBIA Forum|http://forums.oracle.com/forums/forum.jspa?forumID=410]
Cheers,
C.

Can I increase the sound of my ipod?

Is there any way I can increase the volume of the ipod? The sound is fine with in-ear phones, but limited when going to headphones.
Kind regards
Alani

found it myself - for anyone that's interested it's goPod

Increase the DB size in Azure gives the Error " Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671."

Increase the DB size in Azure gives the following error
Msg 40197, Level 16, State 1, Line 1 The service has encountered an error processing your request. Please try again. Error code 40671.
i have used following ALTER query,
ALTER DATABASE database_name MODIFY (EDITION='Business', MAXSIZE=10GB);
Regards
Vel

Hi Taiye,
According to your description, in theory, we can modify the size of database, and the T-SQL statement in your post is right. So we need to verify if there is no problem with network when you execute the modification statement, in addition, you must be connected
to the master database when executing the ALTER DATABASE statement. As the error message, I recommend you login again and connect to the master database then run the statement again.
For more information, see: ALTER DATABASE (Windows Azure SQL Database)
If the error is still exist, the Microsoft support engineer will help to solve the problem from backend. Sometime delay might be expected. Your patience is greatly appreciated.
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Increasing the ipod's preamp level output

Similar Messages

Maybe you are looking for