Increasing the space of Sun server

To increase the space of already running live JISP billing server , need help :-
1. How to check if the partition of disk is hard or soft?
2.How to add a new hard disk without disturbing the services running over the live JISP server.
Additional info:
Server: Sun E-250.
OS: Solaris 8.0

... and you post your STORAGE HARDWARE question into a Solaris 10 forum?
Somehow, that just doesn't seem to be on-topic.

Similar Messages

Can you please assist me in increasing the speed of my server

hai friends,
i am using 4.7ee on windows Can you please assist me in increasing the speed of my server.....

nice hint, but not usefull.
how you are going to set virtual memory???
the maximum virtual address space of a process depends on the architecture (32/64 bit) and - if 32 bit Exectuable - on
- if running on 32 Bit Operating System /3GB and /userva boot.ini options
- if running on 64 Bit Operating System: max 4 GB
as long as your application is able to allocate enough memory your pagefiles are sized sufficiently. If you add physical memory, you normaly can decrease the pagefile size.
1 GB physical is much too less. Depending on the number of users on the server and depending on the SAP Release I would at least recommend to use 4 GB.
regards
Peter

How to increase the performance of Weblogic server 7.0?

How to increase the performance of Weblogic server 7.0 ?
also, how do i avoid typing the server login and password evertime I start the
webserver?

How to increase the performance of Weblogic server 7.0 ?It depends on what is not running fast enough for you.
also, how do i avoid typing the server login and password evertime I
start the webserver?In the startWebLogic shell script (.cmd or .sh) add:
set WLS_USER=weblogic
set WLS_PW=password
(Replace "password" with whatever your password is.)
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"winston" <[email protected]> wrote in message
news:3fe42d33$[email protected]..
>

How to increase the space of a page in Application Designer ?

Folks,
Hello. I am developing a page in Application Designer.
I need to place multiple records with many fields in the page. But the entire space of the page is not enough to place the fields. We need to use a vertical scroll to increase the space of the page to hold all of the fields. But I don't understand how to do this feature.
Can any folks tell me how to increase the space of a page in Application Designer in order to hold many fields ?

Folks,
Hello. Thanks a lot for replying. It's correct !

I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

I have highlighted words in an .iba file. Now I need to increase the space before (and/or after) the paragraph it's contained in. If I increase the space after, the height of the highlighting increases also. Is there any way around this?

http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback

How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated

Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.

In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you
''troyable7 [[#question-1058550|said]]''
<blockquote>
Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.
</blockquote>
In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you

HT3224 Migration created a new user account on my new MacBook, increasing the space used. Any solution?

I recently upgraded my MacBook Pro. Using the migration assistant, I transfered my old backed up (using the Time Machine) things to the new MacBook Pro. It created another user account with the old Administrator ID. This about doubled the space usage on my machine and sort of slowed down the machine. There are no Apple Stores in my area and the machine was brought from the UK. So how do I solve the space problem?

Thanks Neil. What I did before asking the question was simslar to what you suggested. I logged in with the new account, went to the Users&Groups pane, clicked on the other sccount and asked to delete. Which it did. With the older MacBook Pro and under Disk Utilities the space used was about 160 GB. With the new MacBook Pro and after the delete, the Disk Utility is giving me used space as 322.22GB (a difference of 150 GB all things considered). That I think was a substacial increase and I want to figure out why. May be I did something wrong?
Your help is very much appreciated.
Francis

How to increase the memory in Event Server

I have this folowing error in the windows event observer (in french). The memory Event Server memory seems to be to small. (English message traduction : Insufficient memory in the Event Server"" ).
How can i increase this memory ? The physical server is dedicated to Crystal server.
Type de l'événement : Erreur
Source de l'événement : BusinessObjects_EventServer
Catégorie de l'événement : EventServer
ID de l'événement : 35750
Date : 13/10/2010
Heure : 09:56:51
Utilisateur : N/A
Ordinateur : SERVHLM3
Description :
Mémoire insuffisante dans l'Event Server
I have this folowing error in same time... that talk about maximum limit Windows offices reach
(English message traduction : "Attempt to allocate Windows 40 offices, only 19 have been allocated. It may be that the system has reached its maximum limit." ).
Do you know how this can happen ? And how to correct this ?
Type de l'événement : Erreur
Source de l'événement : BusinessObjects_crproc
Catégorie de l'événement : Général
ID de l'événement : 49301
Date : 13/10/2010
Heure : 09:56:54
Utilisateur : N/A
Ordinateur : SERVHLM3
Description :
Tentative d'allocation de 40 bureaux Windows, seulement 19 ont été alloués. Il se peut que le système ait atteint sa limite maximum. Contactez votre administrateur système.

As Ankur said, there are not parameters for this setting.
Probably what you can do is, you can add this server to a defined server group.
Generally you can assign additional resources to a server group. That could probably help you to increase performance.
Regards
Gowtham

Why did you increase the space between bookmarks in the bookmark bar

It use to be smaller, so I could get more bookmarks on the browser bookmark bar. There is too much white space between them IMHO.

Try:
*Bookmarks Deiconizer: https://addons.mozilla.org/firefox/addon/bookmarks-deiconizer/

How do I increase the disk space ?

I recently bought solaris for Intel. I success fully installed
with dual boot. When I am trying to install other software I got
a message saying insufficient diskspace. How do I increase the
space or set up a new partition.
srinivas

Hi ,
For your problem I would suggest following steps.
Use Format command to check whether any of disk partition or disk space is not utilised. If you have consumed all the disk space then only option to you is add new disk. If entire disk space has been utilised then you can't add more disk space on same disk. You need to have additional disk.
If you have any of the partion is still not used then you can merge the adjecent partition with it. Re-partition the disk. Here just ensure that if you have valid data on any of the patition which is going to merge with adjecent partition, then take backup ( ufsdump) as when you change boundary of partition you will need to make file system with newfs command which removes all data from that partition.
Please let me know if you have any questions.
Thanks,
SdD

Increase disk size for virtual server

Hi,
A virtual server system drive is currently at 90%full. How to safely allocate more disk space to the system drive of that virtual server without causing issues to the installed Operating systems on that drive.
I read through the Virtual Iron documentation and nothing mention about increasing disk space for virtual server.
Thanks in advance for response.

Hi,
I was hoping to increase the virtual storage of the drive attached to virtual servers and not the actually physical storage.
I was looking around in it and found was able to increase the disk space by by editing the virtual storage disk.
I tested creating a new disk (5GB), increase the disk space(10GB) and login to virtual server and extend the new disk with the unallocated disk space.
It does seem to work and appear as 15GB.
I just concern if windows operating is installed on that disk, will it cause any issue if I extend it with the unallocated disk space?
Or it's safe to do so?
Many thanks.

How to change the space for check number using OT45?

How to use OT45 to change the check no.of FF68 Check Deposit? I want to change the variant so that I can increase the space for check number as have come up with a special case can someone please help me out how can I do it via OT45?
Thanks in advance...
Regards
Nitin

Hi Amit,
Yes, I agree that we can create a new variant and can assign it after activating it. But, what I want is that I have created a new variant and check space in FF68 is 3 digits and how can I make changes in OT45's new variant so that cheque space gets changed to 10digit or more.
Please Help.
Thanks in advance...
Regards
Nitin

Increase Table Space

Hello Guys.
I need to know to which table space I need to add space if I want to make a copy of a cube that aprox. stores 33 GB of data.
My infocube refers to the following table spaces:
PSAPDIMI
PSAPBTABD
PSAPFACTD
PSAPFACTI
My question is, I have to increase 33 GB of storage in each table space ??, or how can I determine what table space is going to require more space.
And I also need to pass data to an ODS, so I imagine I need to increase tables:
PSAPODSD
PSAPODSI
But how many GB do i have to increase in each table space to ensure a successful load of data from the original cube to the ODS ???.
Thanks in advance.

Guillermo,
It would be better to analyze the same in this fashion:
Tables in the Cube - Fact / Dimension etc
The the size for the same ( maybe through DB02 / DB02old ) and find the tablespace in which this resides and accordingly increase the space.
Also you would need a lot of archive log space - usually depending on the log generation - Archive logs can be upto 10 times the amount of data being loaded...
Also budget for the space for the DSO - it will be less that the compressed cube but still not less by a very big margin....
Arun

How to increase the performance in server 2008 R2 for RDP users

Hi,
My application take to much time to load. If anyone double click on mail client the exe file will appear in task manager but it will open after 5 mins. how to increase the performance.
My sever configuration is as below,
SC2600 Intel motherboard with total 24 core processors and 32 GB RAM and 8 TB Hard Disk. RAID 5 is configured which has two lungs one is 167 GB for C drive and other is 4.5 TB for D drive.
There are 28 Thin-clients connected to server through L300 N computing Thin-clients.
Thin-clients connect to V-space server installed in server for RDP users to get connected.
we have installed around 20 applications including printer and scanner driver. And apps are has below,
Firefox browser, windows mail, Adobe acrobat XI, canon printer and scanner drivers, Epson printer and scanner driver, E scan anti-virus, office 2007, v space, power ISO, win-rar,Tally and e token drivers and some backup software's.
Below are the services and features enabled,
AD, File services, RDP, web server, Hyper-v, .net frame work.
Is there a way to increase the performance .
Very slow performance.

Hi,
what would you suggest on hardware configuration must be for above mentioned applications and services with those many users.
how many cores and ram size is required.

Sun Java 7.0: How to increase the value of

Hi everyone,
In Sun Java 6.1 and former webservers there used to be certain parameters in magnus.conf file like:-
RqThrottle 128
DNS off
Security off
PidLog /export/agent6/amit_server/https-server1/logs/pid
User agent6
StackSize 131072
TempDir /tmp/https-server1-0430e9ef
But in the new web server Sun Java 7.0 there are no such parametes.
The application which i am running needs to increase the value of the parameter "StackSize".
I added this parameter in magnus.conf file of the new Sun Java 7.0 web server but it is ignoring it and giving a warning as "StackSize directive ignored".
Can you all suggest some way by which i can increase the StackSize as my application doesn't run without it.

In WS 7.0 TP release, the magnus.conf configuration file is retained for NSAPI plug-in configuration, but all functionality not related to NSAPI plug-ins has been moved to server.xml. Most of these configuration parameters are now new elements that will be created/defined in server.xml. For StackSize, I believe the server.xml will have an element like follows:
<stack-size>131072</stack-size>
where 131072 is the stack size in bytes. You should be able to configure using GUI or the admin CLI.
Thanks
Manish

Increasing the space of Sun server

Similar Messages

Maybe you are looking for